Scribd
Upload
47 views3 pages

Indigo Vision Control Center - Replace Camera Function

The document outlines the steps to replace a camera in the Indigo Vision Control Center. It includes logging in with Administrator privileges, ensuring the new camera is accessible, and updating device properties if necessary. The replaced device remains in the system to maintain previous recordings until the storage period expires.

Uploaded by

keithgallacher88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
47 views3 pages

Indigo Vision Control Center - Replace Camera Function

The document outlines the steps to replace a camera in the Indigo Vision Control Center. It includes logging in with Administrator privileges, ensuring the new camera is accessible, and updating device properties if necessary. The replaced device remains in the system to maintain previous recordings until the storage period expires.

Uploaded by

keithgallacher88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Indigo Vision Control Center – ‘Replace Camera’

Log into the system with an account that has Administrator privileges and access ‘Setup’.

Ensure the new camera that is replacing the existing camera is on the network and is accessible.

Right-click on the camera you wish to replace and select ‘Replace Camera’:

Select the new camera from the Discovered Devices List:

If the device does not show in the discovered list but is reachable over the network it can be
manually added by entering the Device details.
Indigo Vision Control Center – ‘Replace Camera’

If the new device uses different credentials from the previous, these will need to be updated – Right-
click on the device from the device list and select ‘Properties’:

Select ‘Device Access’ and under ‘ONVIF Authentication’ tick ‘Authenticate with device’ and enter
the Username and Password from the device (ONVIF account on cameras with a separate ONVIF
account):
Indigo Vision Control Center – ‘Replace Camera’

Check all other Device Properties such as Live Video and Recording to ensure the recording job, NVR
and Live Viewing are still configured.

In the device list, the device that was replaced will appear under the new device to maintain the
previous recordings from the old device until the storage period has been reached.

You might also like