Scribd
Upload
14 views1 page

Check Sheet - Motor Installation

The document outlines the inspection process for motor installations, detailing the checks to be performed to ensure compliance with hazardous area classification and equipment integrity. It includes specific criteria such as equipment condition, proper installation, and verification of technical specifications. The form also provides space for recording results and acceptance by the site engineer or quality control personnel.

Uploaded by

roysebastian1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
14 views1 page

Check Sheet - Motor Installation

The document outlines the inspection process for motor installations, detailing the checks to be performed to ensure compliance with hazardous area classification and equipment integrity. It includes specific criteria such as equipment condition, proper installation, and verification of technical specifications. The form also provides space for recording results and acceptance by the site engineer or quality control personnel.

Uploaded by

roysebastian1
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

FM-ELE-101-007

Form No.:
Form
ITP-ELE-101
Owner:
INSPECTION OF MOTOR INSTALLATION
Rev. 00

Page 1 of 1

Tag No: Location Sub-System No:


Equipment Title:
Make: Frame No: Sl. No.
Rating: KW Speed : Rpm: Full load current: A
Rated Voltage: V Rated current: A Frequency: Hz
IP Rating:
EX Protection Type:
Layout Drawing No : Data sheet No:
Haz. Area Classification Drawing No:

Sl.No. Check to be Performed Result

1 Equipment appropriate to hazardous area classification requirements of the location.


2 Equipment and correct accessories undamaged.
3 All holding down bolts are used and properly tightened.
4 Verify nameplate details against data sheets.
5 Tag number and location are correct as per the drawing.
Anti-condensation heaters installed, continuity and IR test done phase to earth
6
___________MΩ (Wherever applicable)
7 Motor fan have sufficient clearance to enclosure and / or covers.
All accessories including Resistance Temperature Detectors (RTD) or thermostats fitted
8
(where applicable).
9 Enclosure flange faces are clean and undamaged and gaskets, if any are satisfactory.
Equipment is adequate protected against corrosion, weather, vibration and other adverse
10
factors.
11 No undue accumulation of dust and dirt.
Main / auxiliary terminal box lids are satisfactory with suitable gasket (where applicable)
12
and fixing screws / bolts tightened and ensures that IP rating is maintained.
Test Equipment type Make Model Sr.No Cal due Date:

0
Ambient Temperature: C Humidity %
Remark:

Record Acceptance: Site Engineer / QC COMPANY


Name:
Signature:
Date:

You might also like