0% found this document useful (0 votes)
15 views4 pages

H2 Rail

The H2-Rail router is a multi-service communications platform designed for railway environments, offering reliable 4G/LTE broadband and Wi-Fi with advanced security and redundancy options. It is compliant with railway regulations, features dynamic configurations for reliable communication, and supports multiple WWAN interfaces for bandwidth aggregation and load balancing. Key features include ruggedized hardware, GPS-based automation, and compatibility with standards-based management platforms for efficient network operations.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
15 views4 pages

H2 Rail

The H2-Rail router is a multi-service communications platform designed for railway environments, offering reliable 4G/LTE broadband and Wi-Fi with advanced security and redundancy options. It is compliant with railway regulations, features dynamic configurations for reliable communication, and supports multiple WWAN interfaces for bandwidth aggregation and load balancing. Key features include ruggedized hardware, GPS-based automation, and compatibility with standards-based management platforms for efficient network operations.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

H2-Rail Datasheet

H2-Rail
H2-Rail: Communications Gateway for
Railway

Introduction Highlight
Multi-service communications platform
The H2-Rail router is a multi-service communications platform for railway
environments. It provides reliable 4G/LTE broadband and Wi-Fi Multiple WWAN(bandwidth
communications with redundancy options, bandwidth aggregation and aggregation&loadbalancing)
advanced network security mechanisms. Compliant with railway regulations
The hardware design is compliant with railway regulations for installations on Geo-fencing: GPS-based dynamic
lightweight and high-speed trains or trams, is EN 50155 certified to meet configuration
vibration and emission requirements, and offers and extended operating
temperature range. Standard-based service isolation

The router also provides extremely reliable communications using dynamic Built-in switch for connection to other
configurations (based on location/communications quality data). systems

Complete Wi-Fi solution(management,


hotspot & APs)

Interfaces

Up to 4 x 4G/LTE Module Yes (depending on the model)

Up to 3 x 802.11ac Wi-Fi (client and AP) Yes (optional)

4 x 10/100/1000 Mbps Giga-Ethernet(M- Yes


12)

Asynchronous serial port (RS-232) (DB-9) Yes

Built-in GPS (NMEA) (FME connector) Yes (optional)

72-110 or 24 VDC power input (M-12) Yes

2 x N-Type per LTE module (MIMO) Yes

2 x N-Type per Wi-Fi module (MIMO) Yes


H2-Rail Datasheet

Competitive Advantages

Concurrent multiple WWAN Up to 4 simultaneous LTE and/or Wi-Fi radio links, with bandwidth aggregation and load-balancing to ensure
interfaces maximum availability and application continuity.

Ruggedized hardware Designed to withstand vibrations and extreme temp (-25 to 70°C). Certified according to railway standards (EN
50155, EN 50121-3-2, EN 45545-2, EN 301 908-1)

Service and GPS-based Communication monitoring (availability/quality) and location tracking for dynamic routing policies per-
automation service/link/position.

Corporate networking Uses the latest IP networking technologies for vehicles, bringing security, quality and ease of use to large-scale,
software multi-service deployments.

Key Features

Broadband with up to 4 concurrent LTE connections Support for up 4G/LTE Quad-SIM for telecom carrier redundancy Quad SIM feature –
to 4 WWAN modules (4G/LTE). Each module can operate independently using a single module for two telecom operators, employing one to back
of the other or as backup. One of the modules also supports up to 2 x up the other and using only one of the modules.
SIM for operator redundancy.
Hardware design for use on trains Designed to withstand vibration and
Wi-Fi 802.11ac for passengers (AP) or stations(client) An 802.11ac extreme temperatures (-25 to 70°C) and has full onboard train
Wi-Fi module means the device can provide Wi-Fi services to certifications (EN 50155, EN 50121-3-2, EN 301 511, EN 301 908-1, EN
passengers throughout their journeys (multiple SSIDs & integration 45545-2).
hotspot platforms) and act in client mode to connect to external Wi-Fi
networks. Bandwidth aggregation/load balancing Concurrent use of multiple
WAN interfaces(LTE, Wi-Fi, satellite, etc.)to distribute and/or aggregate
Compatible with standards-based management platforms Seamless load from multiple services on different interfaces, thus optimizing
integration with third party standards-based management tools (SNMP). coverage areas and enhancing overall performance.
It has also been integrated into Teldat’s Colibri network manager platform
for remote monitoring and management. Location-based (GPS) dynamic behavior Ideal for telemarketing and
fleet management. The device has a GPS (accessible via a TCP port)
Secure, isolated multi-service communications The use of advanced that provides real-time geo-location data in NMEA format.
networking protocols with multiple WAN links allows the services and
management of the different solutions sharing the communications to be Advanced troubleshooting (fine-tuned, cloud) Advanced
logically separated from each other. troubleshooting (such as sniffer and syslog) for analyzing
service/position/coverage problems along the route. Cloud management
High throughput for demanding behavior Up to 985 Mbps of and auto-provisioning allow even unskilled personnel to install the
throughput to provide powerful communications for highly-demanding equipment.
communication scenarios such as those requiring encryption, VRF, policy
routing and QoS.
H2-Rail Datasheet

HARDWARE TECHNICAL FEATURE


Up to 4 concurrent WWAN Interfaces Gigabit Ethernet interfaces
(LTE/HSPA+/HSPA/EDGE) 4 x 10/100/ 1000 BaseT Giga-Ethernet switch (X-coded M-12 connector)
Up to 4 built-in hardware modules with LTE/HSPA+ LEDs on each port for installation troubleshooting
2 external antennas with 1 x Type-N connector per module Support duplex, IEEE 802.3u link-speed auto-negotiation, VLAN and
LTE/DC- 802.1x
HSPA+/HSPA+/HSPA/UMTS/EDGE/GPRS;LTE/EVDO/1xRTT(inquire
about others)
802.11ac Wi-Fi interface GPS interface
802.11ac selectable band (2.4/5 GHz) with AP and client mode Active GPS antenna with FME and NMEA protocol
2x2 MIMO external antennas (type-N connector) per module 48 channels, high sensitivity and WAAS support
WEP, WPA, WPA2 security. WMM QoS. Multi SSID. Provision of local and remote information
Dimensions and Weight Environmental specifications
Length x Width x Height: 186 x 483 x 43,6 mm (1U on a rack) Temperature: -25 to 70 ºC
Approximate weight: 3.3 Kg Relative humidity: 5 to 95%
Flexible installation: rack and horizontal Shock and vibration resistance (EN 61373)

SOFTWARE TECHNICAL FEATURE


Specific Wi-Fi functions IP protocol
Hotspot Gateway function for hotspot service support ARP, ARP Proxy, MTU discovery, NAT, ECMP, BFD
WLAN controller function for Teldat's built-in APs RIP, OSPF, BGP, policy-based static and dynamic routing
Location-based dynamic function (AP or client) Virtual Router Forwarding (Multi-VRF)
IP protocol (2) Security
Multicast: IGMP (v1, v2, v3), PIM-SM, MSDP, MLD, MLDv2 IPSec support in transport and tunnel mode (including DMVPNs)
PSLA service probes (delay, packet loss, jitter) Pre-shared authentication, RSA, Certificates, MDS, SHA-1, SHA-2
High availability: VRRP, TVRP (HSRP compatible) DES (56 bits), 3DES (168 bits), AES (128, 192 and 256 bits), IKEv1,
IKEv2
Security (2) IP Services
Certificates: CSR, SCEP, X.509v3, PKIX, LDAP revocation Telnet, DHCP, DNS, FTP, SFTP, and SHH server and client
Static and dynamic access lists and session-based firewall NTP, LDAP, Syslog, SCP client. TFTP server
DoS/DDoS attack detection DHCP, dynDNS relay
Quality of Service (QoS) Specific WWAN functions
Classification, marking, BW management, BW prioritisation and limitation Automatic hand-over (passive and active probe-based detection)
Up to 32 classes 16 queues per interface Advanced link monitoring (packet errror, latency, jitter)
Priority Queuing (PQ), Low latency (LLQ), by weight/type (WFQ, CBWFQ) Quadruple SIM and module associated with the hand-over mechanism
Management Management (2)
CLI configuration and storage in a plain text file Netflow, RMON V5 and V9, SNMPv1, v2c y v3, Syslog support
Assignment of user/group licenses Manageable via SMS
RADIUS and TACACS+ compatible AAA support Wireshark-compatible remote traffic capture

ADDITIONAL TECHNICAL FEATURE


Console interface and asynchronous serial port Load balancing and bandwidth aggreagation
DB-9 connector with proprietary pinouts (including adapter) (OLA)
Type RS232, N81 Open Link Aggregation Protocol
Default speed 9600 bps. Maximum speed: 115200 bps Intelligent IPSec-based load balancing aggregation mechanism
Aplication continuity and per-session load balancing
Advanced GPS functions Onboard environment ruggedness and power
GPS geo-fencing for location-based dynamic behavior supply protection
Location-based link/route activation 72-110 VDC or 24 VDC power supply
Location-based interafce management (such as Wi-Fi as client/AP) Certifications: EN 50155, EN 50121-3-2, EN 301 511, EN 301 908-1,
EN45545-2
20 W consumption, screw-on connectors (M-12, type-N and FME)
H2-Rail Datasheet

Scenarios

Teldat Group

Founded in 1985, Teldat is a Spanish company whose SPAIN ©2022 Teldat S.A.
mission is to provide companies with valuable solutions for Calle Isaac Newton, 10
cloud access, remote office communications, cyberse-curity Tres Cantos - 28760
and voice/data connectivity both in the office and in specific Madrid (Spain)
environments whether they are industrial, railway, vehicles or Phone:+34 91 807 6565
public services. [email protected]

Website: www.teldat.com

You might also like