Scribd
Upload
4 views2 pages

(A 3) Course Syllabus

The course on Microprocessor-based automation focuses on programming methods for automation functions, emphasizing the use of macrocomponents for cost-effective data transmission. It aims to equip students with knowledge and skills in modern electronic systems, preparing them for professional development in automation and control. The course requires a background in physics, electronics, and digital electronics, and assessments are conducted through a rating system.

Uploaded by

sanat.raxmatov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views2 pages

(A 3) Course Syllabus

The course on Microprocessor-based automation focuses on programming methods for automation functions, emphasizing the use of macrocomponents for cost-effective data transmission. It aims to equip students with knowledge and skills in modern electronic systems, preparing them for professional development in automation and control. The course requires a background in physics, electronics, and digital electronics, and assessments are conducted through a rating system.

Uploaded by

sanat.raxmatov
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

[A-3]COURSE SYLLABUS

1. Course Description (Approximately 100 words)


The Microprocessor based automation, associated with new methods to program the
automation funtions. These microprocessors allow to envisage the installation of an
automation programmable equipment at the head of every feeder. So, we keep the natural
independance between all automation equipments of the feeders. This structure is eminently
favourable to the operating safety of the system. The new programmation methods allow to
benefit of all evolution capabilities of the programmable equipments.
The using of macrocomponents. They offer the possibility to realize the numerical
communicate system, with a low price, and which only needs a single physical support to
transmit the datas.
With the numerical processing components, these devices are constituting an homogeneous
equipment which can, be substituated for the present connectors to reduce the price of the
substation wiring.
2. Course Goals and Objectives (Approximately 100 words)
Aims of the course:
- formation of special knowledge, skills, calculation and design skills, as well as competences
in the field of modern highly efficient electronic systems;
-to teach to work effectively individually and in a team, to show the skills and skills necessary
for professional and personal development;
-preparation of students for further development of new professional knowledge and skills,
self-training, continuous professional self-improvement.
The discipline "Micoprocessor based automation" refers to the professional cycle. To
successfully master the module, you need basic knowledge of digital and analog electronics.

3. Textbook (Title, Author, Publisher, Year of Publication, etc.)


Main textbooks:
1. E.O‘ljayev. Mikroprotsessorlar va mikro EHM asoslari. –Toshkent: Farzay-Poligraf, 2012.
-412 b.
2. E.O‘ljayev. Mikroprotsessorlar va mikro EHM asoslari. –Toshkent: Farzay-Poligraf, 2011.
-368b.
3. Yusupbekov N.R., Muxamedov B.I., G’ulomov Sh.M. Техnologik jarayonlarni nazorat qilish
va avtomatlashtirish. –Тоshkent: O‘qituvchi, 2011. -576 b.
4. Э.Улжаев. Автоматлаштиришнинг микропроцессорли қурилмалари фанидан
маърузалар тўплами. –Т.: ТДТУ, 1999. – 132 б.
5. Charles L. Phillips Troy Nagle. Digital Control System Analysis & Design (4th Edition). –
4.USA
Reference
(North Carolina State University): Prentice Hal, 2014. - 528 p.
Additional textbooks:
1. www.ziyonet.uz
1. Гребнев В.В. Микроконтроллеры семейства AVR фирмы Atmel. –Москва: ИП
2. http://www.cpd.meria.ru/-team/index.html.
Радиософт, 2002. - 176с.
3. http://www.robotics.uc.edu/.
2. Программирование на языке С для AVR и PIC микроконтроллеров /Сост. Ю.А.Шпак. –
4. http://www.robotics.utexas.edu./rrg//.
Киев: МК-пресс, 2006. - 400с.
5. www.avr.ru
3. Леонтьев В.П. Новейшая энциклопедия персонального компьютера. – М.:
6. www.avrki.ru
ОЛМА-ПРЕСС, 2004. – 722 с.
7. https://community.atmel.com/
4. Провалов В.С. Автоматизированные информационные технологии управления. –
8. http://www.hpinfotech.ro/
Киров, 2003. – 250 с.
9. http://cxem.net/software/proteus.php
5. Батырев Р.И., Зарецкий Б. Ф., Эленбоген М. М. и др. Микропроцессоры в химической
промышленности: Автоматическое регулирование и адаптивное управление. -М.:
Производственно-практическое издание, 1998. – 136 с.
6. Гусев В.Г., Гусев Ю.М. Электроника и микропроцессорная техника. – М.: Высшая
школа, 2013. – 800 с.
7. Электроника и микропроцессорная техника. - 1 - Дипломное проектирование систем
автоматизации и управления / Под ред. В.И. Лачина. – М.: Феникс, 2007. – 576 с.
5. Course Requirements and Grades
This course is designed for students who enrolled to class in spesialization of 5311000
"Automatization and control of technological process and production". This course is provided
8th semester and it is one of the special designed from requirements of enterprise companies.
The student minimum have to know these subjects: Physics, Electronics, Electrotechnics,
Digital Electronics.
Assesment of students provided by rating system which approved by the institute.

Ongoing Control
№ Indicator OC ball
Max points range
6.1 Course Calendar
Activity in practical classes 10 0-10
Week work
2 Independent Main Content
15 0-15
3 test 10 0-10
amount 1 of score Basic concepts microprocessors and microcontrollers
35 0-35
2 Classes of microprocessor, architecture
Intermediate control
№ Indicator
3 IM ball Complexes of sectional microprocessors
Max points range

1 Activity4 in lectures 10 0-10 Microprocessor interface, microcontroller interface


2 Independent work 15 0-15
3 Colloquium, test 10 0-10
amount 5 of score 35 0-35Languages programming of microprocessors and microcontrollers

6
Final test System of basic commands of microprocessors and microcontrollers
№ Indicator FT ball
Max points range
7 Programming interface
1 Test 30 0-30
amount of score 30 0-30
8 Programming of microcontrollers

9 Designing of microprocessor device

10 Microprocessor control system

11 Application of microprocessor memory

12 Examples of microcontroller application

13 Microcontroller control of electric motors

14 Control and monitoring by microcontroller device

-2-

You might also like