GMH95 / GCH95

Two-Stage Convertible,
Multi-Speed Gas Furnaces
Up to 96% AFUE
Standard Features
• Heavy-duty aluminized-steel dual-
diameter, tubular heat exchanger
• Stainless-steel secondary heat exchanger
• Two-stage convertible gas valve auto-
matically adjust to high or low stage
• Durable Silicon Nitride igniter
• Quiet single speed draft inducer
• Self-diagnostic control board with
constant memory fault code
• Color-coded low-voltage terminals with provisions
for electronic air cleaner and humidifier
• Multi-speed blower motor
• Low continuous fan speed options offer
quiet air circulation
• All models comply with California
Low NOx emissions standards
Cabinet Features
• Designed for multi-position installation:
GMH95: upflow, horizontal left or right;
GCH95/GCH9: downflow, horizontal left or right
• Certified for direct vent (2-pipe) or
non-direct vent (1-pipe)
• Easy to install top venting with optional side venting
• Convenient left or right connection
for gas and electrical service
• Cabinet air leakage (QLeak) ≤ 2%
• Heavy-gauge steel cabinet with durable
baked-enamel finish
• Fully insulated heat exchanger and blower section
• Airtight solid bottom or side-return with
easy-cut tabs for effortless removal in
bottom air-inlet applications

Contents
Nomenclature........................................ 2
Product Specifications........................... 3
Dimensions............................................ 5
Airflow Data............................................7
Wiring Diagrams.................................... 9
Accessories............................................11

* Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the Lifetime Heat
Exchanger Limited Warranty (good for as long as you own your home), 10-Year Unit Replacement Limited Warranty and 10-
Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not
required in California or Québec.

SS-GMH95 www.goodmanmfg.com 5/14

Supersedes 11/12
Product Specifications

Nomenclature

G M H 95 045 4 B X A
1 2 3 4,5 6,7,8 9 10 11 12

Brand Revisions
G Goodman® Brand A Initial Release
or Distinctions™ B 1st Revision
C 2nd Revision
Airflow Direction
C Downflow/Horizontal NOx
D Dedicated Downflow N Natural Gas
H High Airflow X Low NOx
K Dedicated Upflow
M Upflow/Horizontal Cabinet Width
A 14”
Description B 17½”
V Two-Stage/Variable-speed C 21”
H Two-Stage/Multi-speed D 24½”
S Single-Stage/Multi-speed
E Two-Stage/EEM Motor Maximum CFM @ 0.5” ESP
3 1200 5 2000
AFUE 4 1600
95 95%
9 93%+ MBTU/h
8 80% 045: 45,000 115: 115,000
070: 70,000 140: 140,000
090: 90,000

2 www.goodmanmfg.com SS-GMH95
 Product Specifications

Specifications for GMH95

GMH95 GMH95 GMH95 GMH95 GMH95 GMH95
0453BXA 0703BXA 0704CXA 0904CXA 0905CXA 1155DXA
Heating Capacity
Input¹ 46,000 69,000 69,000 92,000 92,000 115,000
Natural Gas Output¹ 44,200 66,300 66,300 88,400 88,400 110,500
LP Gas Output¹ 39,800 59,700 59,700 79,600 79,600 99,500
AFUE² 96.1 96.1 96.1 96.1 96.1 96.1
Available AC @ 0.5” ESP 3 3 4 4 5 5
Temperature Rise Range (°F) 35 - 65 30 - 60 35 - 65 30 - 60 30 - 60 35 - 65
Circulator Blower
Size (D x W) 10” x 8” 10” x 8” 10” x 10” 10” x 10” 11” x 10” 11” x 10”
Horsepower @ 1075 RPM ⅓ ⅓ ½ ½ ¾ ¾
Speed 4 4 4 4 4 4
Vent Diameter³ 2” 2” 2” 2” 3” 3”
No. of Burners 2 3 3 4 4 5
Filter Size (in²)
Permanent⁴ 290 288 385 385 480 480
Disposable 580 580 770 770 960 960
Electrical Data
Min. Circuit Ampacity⁵ 9.4 9.4 13.8 13.8 13.2 13.2
Max. Overcurrent Device (amps)⁶ 15 15 15 15 15 15
Ship Weight (lbs) 120 123 125 144 146 163

¹ Natural Gas BTU/h. For altitudes above 2,000’, reduce input rating 4% for each 1,000’ above sea level.
² DOE AFUE based upon Isolated Combustion System (ICS)
³ Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe
must be either 2” or 3” in diameter, depending upon furnace input, number of elbows, length of run and installation (1 or 2
pipes). The optional Combustion Air Pipe is dependent on installation/code requirements and must be 2” or 3” diameter PVC.
⁴ Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be deter-
mined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
⁵ Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit break-
er size. May use fuses or HACR-type circuit breakers of the same size as noted.
Notes
• All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
• Gas Service Connection ½” FPT
• Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or
all existing local codes.

SS-GMH95 www.goodmanmfg.com 3
Product Specifications

Specifications for GCH95

GCH95 GCH95 GCH95 GCH95 GCH95 GCH93
0453BXA 0703BXA 0704CXA 0904CXA 0905DXA 1155DXA
Heating Capacity
Input¹ 46,000 69,000 69,000 92,000 92,000 115,000
Natural Gas Output¹ 44,200 66,300 66,300 88,400 88,400 106,500
LP Gas Output¹ 39,800 59,700 59,700 79,600 79,600 96,255
AFUE² 96.1 96.1 96.1 96.1 96.1 93.0
Available AC @ 0.5” ESP 3 3 4 4 5 5
Temperature Rise Range (°F) 25-55 35-65 25-55 40 - 70 35-65 40 - 70
Circulator Blower
Size (D x W) 10” x 8” 10” x 8” 10” x 10” 10” x 10” 11” x 10” 11” x 10”
Horsepower @ 1075 RPM ⅓ ⅓ ½ ½ ¾ ¾
Speed 4 4 4 4 4 4
Vent Diameter³ 2” 2” 2” 2” 2" 2"
No. of Burners 2 3 3 4 4 5
Disposable Filter Size (in²) 576 564 564 752 752 940
Electrical Data
Min. Circuit Ampacity⁴ 9.8 9.8 12.9 12.9 13.4 13.2
Max. Overcurrent Device (amps)⁵ 15 15 15 15 15 15
Ship Weight (lbs) 120 123 123 144 146 160

¹ Natural Gas BTU/h. For altitudes above 2,000’, reduce input rating 4% for each 1,000’ above sea level.
² DOE AFUE based upon Isolated Combustion System (ICS)
³ Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe
must be either 2” or 3” in diameter, depending upon furnace input, number of elbows, length of run and installation (1 or 2
pipes). The optional Combustion Air Pipe is dependent on installation/code requirements and must be 2” or 3” diameter PVC.
⁴ Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be deter-
mined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes.
⁵ Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit break-
er size. May use fuses or HACR-type circuit breakers of the same size as noted.
Notes
• All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply.
• Gas Service Connection ½” FPT
• Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or
all existing local codes.

4 www.goodmanmfg.com SS-GMH95
 Product Specifications

GMH95COMPONENT
Dimensions IDENTIFICATION
GMH95*****XA*

AIR
DISCHARGE AIR
DISCHARGE

19 7/8”

AIR
INTAKE
PIPE
2" PVC

RIGHT SIDE
1 1/2 DRAIN LINE
HOLES

1 5/8
1 UNFOLDED FLANGES UNFOLDED FLANGES

FOLDED FLANGES
FOLDED FLANGES

RIGHT SIDE VIEW

Model A B C D E
GMH950453BXA 17½” 16” 13⅛” 12⅛” 13⅝”
GMH950703BXA 17½” 16” 13⅛” 12⅛” 13⅝”
Cabinet Size A B C D E
GMH950704CXA 21” 19½” 16⅛” 16” 17½”
GMH950904CXA 21” 19½” 16⅛” 16” 17½”
GMH950453BXA*
17-1/2 16 12-15/16 12-1/8 13-5/8
GMH950905CXA 21”
GMH950703BXA* 19½” 20⅝” 19⅜” 20⅞”
GMH951155DXA 24½” 23” 20⅝” 19⅜” 20⅞”
GMH950704CXA*
Notes: 21 19-1/2 15-15/16 16 17-1/2
GMH950904CXA*
• Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe
must be either 2” or 3” in diameter, depending upon furnace input, number of elbows, length of run, and installation (1 or 2 pipes).
GMH950905DXA*
The optional combustion air pipe isGMH951155DXA*
dependent on installation/code
24-1/2 requirements
23 and must be 2”19-3/8
20-7/16 or 3” diameter PVC.
20-7/8
• Line voltage wiring can enter through the right or left side of furnace. Low-voltage wiring can enter through the right or left side of furnace.
• Conversion kits for high-altitude All
natural gas operation
dimensions are available. Contact your Goodman distributor or dealer for details.
are in inches.
• Installer must supply the following gas line fittings, according to which entrance is used:
Left: One 90º street elbow; one 2½” pipe nipple; one 90º elbow; straight pipe; one ground joint union
Right: Straight pipe to reach gas valve
• Installations using a bottom return: Failure to unfold duct flanges will reduce airflow area by approximately 18%. This could result in performance and noise issues.

NOTE: Airflow area will be reduced by approximately 18% if duct flanges are not unfolded. This could cause performance issues and
Minimum Clearances tonoise
Combustible
issues.
Materials
Position Sides Rear Front Bottom Flue Top
Upflow 0” 0” 1” C 0” 1”
Horizontal 6” 0” 1” C 0” 4”
6
• C = If placed on combustible floor, the floor MUST be wood ONLY.
• For servicing or cleaning, a 24” front clearance is recommended.
• Unit connections (electrical, flue, and drain) may necessitate greater clearances than the minimum clearances listed above.
• In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.
• Approved for line contact in the horizontal position

SS-GMH95 www.goodmanmfg.com 5
Product Specifications

GCH95 Dimensions

Model A B C D E
GCH950453BXA 17½” 16” 12⅜” 14½” 16”
GCH950703BXA 17½” 16” 12⅜” 14½” 16”
GCH950704CXA 21” 19½” 16⅜” 18” 19½”
GCH950904CXA 21” 19½” 16⅜” 18” 19½”
GCH950905DXA 24½” 23” 20⅜” 21½” 23”
GCH951155DXA 24½” 23” 20⅜” 21½” 23”
Notes:
• Installer must supply one or two PVC pipes: one for combustion air (optional) and one for the flue outlet (required). Vent pipe must
be either 2” or 3” in diameter, depending upon furnace input, number of elbows, length of run, and installation (1 or 2 pipes). The
optional combustion air pipe is dependent on installation/code requirements and must be 2” or 3” diameter PVC.
• Line voltage wiring can enter through the right or left side of furnace. Low-voltage wiring can enter through the right or left side of furnace.
• Conversion kits for high-altitude natural gas operation are available. Contact your Goodman distributor or dealer for details.
• Installer must supply the following gas line fittings, according to which entrance is used:
Left: One 90º street elbow; one 2½” pipe nipple; one 90º elbow; straight pipe; one ground joint union
Right: Straight pipe to reach gas valve
• Installations using a bottom return: Failure to unfold duct flanges will reduce airflow area by ap-
proximately 18%. This could result in performance and noise issues.

Minimum Clearances to Combustible Materials

Position Sides Rear Front Bottom Flue Top
Downflow 0” 0” 1” NC 0” 1”
Horizontal 6” 0” 1” C 0” 4”
C = Combustible: If placed on combustible floor, the floor MUST be wood ONLY.
NC = Non-Combustible: A combustible floor sub-base must be used for installation on combustible flooring
Notes:
• For servicing or cleaning, a 24” front clearance is recommended.
• Unit connections (electrical, flue and drain) may necessitate greater clearances than the minimum clearances listed below.
• In all cases, accessibility clearance must take precedence over clearances from the enclosure where accessibility clearances are greater.

6 www.goodmanmfg.com SS-GMH95
 Product Specifications

GMH95 Airflow Data

(CFM & Temperature Rise vs. External Static Pressure)

External Static Pressure, (Inches Water Column)

Motor Tons
Model 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Speed AC¹
CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise CFM CFM CFM

High 3 1,352 29 1,318 30 1,260 31 1,202 33 1,128 35 1,044 955 853

GMH95 Med 2.5 1,214 32 1,172 34 1,123 35 1,064 37 1,012 39 938 859 741
0453BXA Med-Lo 2 997 40 994 40 960 41 923 43 884 45 817 741 611
Low 1.5 757 52 753 52 734 54 704 56 674 59 620 524 438

High 3 1,449 41 1,409 42 1,326 45 1,273 47 1,201 49 1,194 1,136 1,018

GMH95 Med 2.5 1,192 50 1,172 51 1,141 52 1,094 54 1,046 57 973 904 793
0703BXA Med-Lo 2 981 61 962 62 943 63 917 65 888 67 830 764 665
Low 1.5 750 79 730 81 714 83 692 86 657 90 620 570 502

High 4 2,069 29 1,965 30 1,871 32 1,756 34 1,661 36 1,549 1,415 1,275

GMH95 Med 3.5 1,752 34 1,724 34 1,667 36 1,603 37 1,488 40 1,402 1,290 1,082
0704CXA Med-Lo 3 1,437 41 1,437 41 1,417 42 1,369 43 1,320 45 1,256 1,140 984
Low 2.5 1,184 50 1,177 50 1,161 51 1,132 52 1,095 54 1,047 928 837

High 4 1,970 40 1,874 42 1,757 45 1,667 48 1,566 51 1,431 1,334 1,182

GMH95 Med 3.5 1,713 46 1,650 48 1,572 50 1,510 52 1,418 56 1,313 1,211 1,079
0904CXA Med-Lo 3 1,439 55 1,412 56 1,370 58 1,327 60 1,260 63 1,166 1,078 956
Low 2.5 1,183 67 1,155 69 1,122 71 1,108 72 1,062 75 1,011 931 816

High 5 2,147 37 2,114 37 2,057 39 2,030 39 1,978 40 1,889 1,784 1,713

GMH95 Med 4 1,675 47 1,686 47 1,640 48 1,623 49 1,557 51 1,501 1,455 1,360
0905CXA Med-Lo 3.5 1,489 53 1,470 54 1,436 55 1,409 56 1,361 58 1,318 1,243 1,130
Low 3 1,307 61 1,265 63 1,234 64 1,203 66 1,168 68 1,096 1,053 991

High 5 2,134 46 2,103 47 2,029 48 1,941 51 1,906 51 1,818 1,733 1,625

GMH95 Med 4 1,678 58 1,643 60 1,643 60 1,577 62 1,527 64 1,489 1,423 1,339
1155DXA Med-Lo 3.5 1,453 68 1,440 68 1,426 69 1,363 72 1,349 73 1,314 1,253 1,205
Low 3 1,259 78 1,239 79 1,220 80 1,181 83 1,159 85 1,118 1,082 1,015

¹ @0.5” ESP
Notes:
• CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer.
• All furnaces ship as high-speed cooling and medium-speed heating. Installer must adjust blower cooling & heating speed as needed.
• For most applications, about 400 CFM per ton when cooling is desirable.
• INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.
• The chart is for information only. For satisfactory operation, external static pressure should not exceed value shown on the rating plate.
• The above chart is for furnaces installed at 0-2000 feet. At higher altitudes, a properly de-rated unit will have ap-
proximately the same temperature rise at a particular CFM, while ESP at the CFM will be lower.

SS-GMH95 www.goodmanmfg.com 7
Product Specifications

GCH95 Airflow Data

(CFM & Temperature Rise vs. External Static Pressure)
External Static Pressure, (Inches Water Column)
Motor Tons
Model 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Speed AC¹
CFM Rise CFM Rise CFM Rise CFM Rise CFM Rise CFM CFM CFM
High 3 1,415 28 1,352 30 1,290 31 1,196 34 1,127 36 1,035 936 825

GCH95 Med 2.5 1,221 33 1,178 34 1,127 36 1,073 38 1,007 40 932 834 733
0453BXA Med-Lo 2 1,034 39 1,000 40 976 41 935 43 881 46 818 733 662
Low 1.5 860 47 845 48 812 50 783 51 740 54 682 619 534
High 3 1,431 42 1,368 44 1,296 47 1,228 49 1,150 53 1,055 962 860

GCH95 Med 2.5 1,212 50 1,182 51 1,138 53 1,091 55 1,019 59 944 871 769
0703BXA Med-Lo 2 1,002 60 978 62 956 63 921 66 878 69 825 738 647
Low 1.5 813 74 805 75 790 76 759 80 726 83 689 644 605
High 4 1,755 34 1,674 36 1,632 37 1,510 40 1,423 42 1,325 1,241 1,116

GCH95 Med 3.5 1,656 36 1,585 38 1,536 39 1,429 42 1,355 45 1,268 1,145 1,059
0704CXA Med-Lo 3 1,551 39 1,488 41 1,427 42 1,353 45 1,290 47 1,195 1,100 1,017
Low 2.5 1,286 47 1,258 48 1,241 49 1,185 51 1,112 54 1,067 983 886
High 4 1,734 46 1,652 49 1,578 51 1,508 53 1,413 57 1,336 1,248 1,154

GCH95 Med 3.5 1,642 49 1,558 52 1,487 54 1,418 57 1,336 60 1,243 1,164 1,039
0904CXA Med-Lo 3 1,522 53 1,458 55 1,396 58 1,321 61 1,253 64 1,182 1,101 986
Low 2.5 1,287 63 1,244 65 1,184 68 1,148 70 1,098 73 1,034 953 849
High 5 2,189 37 2,109 38 2,025 40 1,948 41 1,862 43 1,757 1,644 1,537

GCH95 Med 4 1,885 43 1,831 44 1,776 45 1,711 47 1,637 49 1,539 1,453 1,346
0905DXA Med-Lo 3.5 1,665 48 1,627 50 1,584 51 1,524 53 1,462 55 1,400 1,323 1,220
Low 3 1,474 55 1,440 65 1,401 57 1,356 59 1,310 61 1,255 1,193 1,109
High 5 2,134 46 2,103 47 2,029 48 1,941 51 1,906 51 1,818 1,733 1,625

GCH95 Med 4 1,678 58 1,643 60 1,643 60 1,577 62 1,527 64 1,489 1,423 1,339
1155DXA Med-Lo 3.5 1,453 68 1,440 68 1,426 69 1,363 72 1,349 73 1,314 1,253 1,205
Low 3 1,259 78 1,239 79 1,220 80 1,181 83 1,159 85 1,118 1,082 1,015

¹ @0.5” ESP
Notes:
• CFM in chart is without filter(s). Filters do not ship with this furnace, but must be provided by the installer.
• All furnaces ship as high-speed cooling and medium-speed heating. Installer must adjust blower cooling & heating speed as needed.
• For most applications, about 400 CFM per ton when cooling is desirable.
• INSTALLATION IS TO BE ADJUSTED TO OBTAIN TEMPERATURE RISE WITHIN THE RANGE SPECIFIED ON THE RATING PLATE.
• The chart is for information only. For satisfactory operation, external static pressure should not exceed value shown on the rating plate.
• The above chart is for furnaces installed at 0-2000 feet. At higher altitudes, a properly de-rated unit will have ap-
proximately the same temperature rise at a particular CFM, while ESP at the CFM will be lower.

8 www.goodmanmfg.com SS-GMH95
SS-GMH95
Wiring Diagram — GMH95

www.goodmanmfg.com
Wiring is subject to change. Always
High Voltage: Disconnect all power before servicing or installing this unit. Multiple power
refer to the wiring diagram or the ⚠ Warning sources may be present. Failure to do so may cause property damage, personal injury, or death. ⚡

9
unit for the most up-to-date wiring.
Product Specifications
Product Specifications

Wiring Diagram — GCH95 / GMH950905C

HUMIDIFIER INTEGRATED
CONTROL MODULE

TR (6)
C
GND
GND (8) GAS
HI VALVE
MVC (9)
PM
BLOWER MVH (12) AUXILIARY LIMIT CONTROLS
24 VAC OR
COMPARTMENT
HUMIDIFIER GY DOOR SWITCH C
(OPEN WHEN MVL(2) C
NO
24 VAC DOOR OPEN)
40 V A FRONT COVER

24V THERMOSTAT CONNECTIONS

TRANSFORMER G PS (10) PRESSURE SWITCH
115 VAC PSO (4)
24V THERMOSTAT Y TO
CONNECTIONS MICRO HLI (7)

⚡
C G R W Y W
WH HLO (1)
BK C NO

BK
AUTO RESET PRIMARY
LIMIT CONTROL

High Voltage: Disconnect all power before servicing or installing this unit. Multiple power
sources may be present. Failure to do so may cause property damage, personal injury, or death.
R ID BLOWER

BK
RO2 (11) PRESSURE
FUSE
OR SWITCH
GY RO1 (5)
3 2 1 PU
MANUAL RESET ROLLOUT
INTEGRATED 6 5 4 OR LIMIT CONTROL(S)
CONTROL (SINGLE CONTROL ON 45K BTU)
MODULE TH (3) 24 VAC
9 8 7 BL
ON OFF GR 40 VA
12 11 10 YL TRANSFORMER
2ND
STAGE
DELAY
* GY
OR
OR
XFMR-H 115 VAC
MODE
* RD
BR FLAME SENSOR
HEAT
OFF
GY FS
OR
* DELAY HOT SURFACE

* SHOWN
FACTORY SETTINGS IGNITER
TERMINALS
115 VAC NEUTRAL

WH IGN
FS

INTEGRATED CONTROL MODULE

INTEGRATED CONTROL MODULE
XFMR-H

DIAGNOSTIC SEE
NOTE 6 2
LED
PU

GY

WH ID

LINE NEUTRALS
115 VAC HOT AND PARK TERMINALS 1 BLWR
IND
COOL-H HEAT-H L
BK HE O
LINE-H AT
SEE -H
GND NOTE 4
WH COOL-H CIRCULATOR
GR

GY BLWR
BK (HI) RD PK HI -H
BL (MED) AT
YL

HE
WH

RD

OR (MED LOW)
OR

RD (LOW)
BK
BL

ELECTRONIC
CIRCULATOR
OR

AIR CLEANER
BR BLOWER EAC-H
BR
BR

YL
LINE-H
WH

CAPACITOR JUNCTION BOX

OR

DOOR
PU GY SWITCH
BLOWER COMPARTMENT

BURNER COMPARTMENT WARNING:

DISCONNECT POWER DISCONNECT
GND BEFORE SERVICING.
WIRING TO UNIT
BK MUST BE
PROPERLY
WH WH POLARIZED
INDUCED DRAFT AND GROUNDED.
BLOWER L GND N
WH TO 115VAC/ 1 Ø /60 HZ POWER SUPPLY WITH
AUTO RESET OVERCURRENT PROTECTION DEVICE
PRIMARY LIMIT PU

⚠ Warning
CONTROL
BL

YL
RD OR OR
N C
O
PK RD
WH
WARNING:DISCONNECT POWER BEFORE
ID BLOWER MANUAL RESET ROLLOUT LIMIT CONTROL(S) SERVICING.WIRING TO UNIT MUST BE
( SINGLE CONTROL ON 45K BTU ) BL JUNCTION PROPERLY POLARIZED AND GROUNDED.
PRESSURE 24 VAC
BOX
SWITCH HUMIDIFIER FRONT COVER
TO 115 VAC / 1Ø / 60HZ
DEVICE
OVERCURRENT PROTECTION
POWER SUPPLY WITH

Wiring is subject to change. Always

refer to the wiring diagram or the
2 CIRCUIT PM 1 GY
C
N
O
PRESSURE SWITCH
GY WH N
unit for the most up-to-date wiring.
CONNECTOR
GND GR GND
HOT
SURFACE
HI 2 OR BK L
IGNITER C 3 BR FLAME DISCONNECT
GAS VALVE (HONEYWELL) SENSOR

0 STEADY ON = NORMAL OPERATION LOW VOLTAGE (24V) EQUIPMENT GND

OFF = CONTROL FAILURE
LOW VOLTAGE FIELD FIELD GND
1 1 FLASH = SYSTEM LOCKOUT (RETRIES EXCEEDED)
2 2 FLASHES = PRESSURE SWITCH STUCK CLOSED HI VOLTAGE (115V) FIELD SPLICE
3 3 FLASHES = PRESSURE SWITCH STUCK OPEN HI VOLTAGE FIELD SWITCH (TEMP.)
4 4 FLASHES = OPEN HIGH LIMIT JUNCTION
5 5 FLASHES = FLAME SENSE WITHOUT GAS VALVE IGNITER
TERMINAL
6 6 FLASHES = OPEN ROLLOUT OR OPEN FUSE SWITCH (PRESS.)
INTERNAL TO
7 7 FLASHES = LOW FLAME SIGNAL
INTEGRATED CONTROL OVERCURRENT
8 8 FLASHES = CHECK IGNITER OR IMPROPER GROUNDING
PLUG CONNECTION PROT. DEVICE
C CONTINUOUS/RAPID FLASHES = REVERSED 115 VAC POLARITY
COLOR CODES: PK PINK NOTES:
BR BROWN 1. SET HEAT ANTICIPATOR ON ROOM THERMOSTAT AT 0.7 AMPS.
YL YELLOW 2. MANUFACTURER'S SPECIFIED REPLACEMENT PARTS MUST BE USED WHEN SERVICING.
OR ORANGE WH WHITE 3. IF ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE FURNACE MUST BE REPLACED, IT MUST BE REPLACED WITH WIRING MATERIAL HAVING A TEMPERATURE
PU PURPLE BL BLUE RATING OF AT LEAST 105°C. USE COPPER CONDUCTORS ONLY.
GN GREEN GY GRAY 4. IF HEATING AND COOLING BLOWER SPEEDS ARE NOT THE SAME, DISCARD JUMPER BEFORE CONNECTING BLOWER LEADS. UNUSED BLOWER LEADS MUST BE
BK BLACK RD RED PLACED ON "PARK" TERMINALS OF INTEGRATED CONTROL OR TAPED.
5. UNIT MUST BE PERMANENTLY GROUNDED AND CONFORM TO N.E.C. AND LOCAL CODES.
0140F01027-B 6. TO RECALL THE LAST 5 FAULTS, MOST RECENT TO LEAST RECENT, DEPRESS SWITCH FOR MORE THAN 2 SECONDS WHILE IN STANDBY (NO THERMOSTAT INPUTS)

10 www.goodmanmfg.com SS-GMH95
 Product Specifications

Accessories — GMH95
GMH95 GMH95 GMH95 GMH95 GMH95 GMH95
Accessory Description
0453BXA 0703BXA 0704CXA 0904CXA 0905CXA 1155DXA

LPM-06 LP Conversion Kit (Springs & Orifice)* √ √ √ √ √ √

LPLP03 LP Gas Low-Pressure Kit √ √ √ √ √ √

GSAS Electronic Air Cleaners (-10, -11, -12, -18) √ √ √ √ √ √

GMU Media Air Cleaners (1620, 2020, 1625, 2025) √ √ √ √ √ √

HANG11 High Altitude Natural Gas Kit 1 1 1 1 1 1

HANG12 High Altitude Natural Gas Kit 2 2 2 2 2 2

HALP10 High Altitude LP Gas Kit 3 3 3 3 3 3

HAPS27 High Altitude Pressure Switch Kit 3 3 3 3 3 3

FTK04 Twinning Kit √ √ √ √ √ √

EFR01 External Filter Rack √ √ √ √ √ √

DCVK-20 Horizontal/Vertical Concentric Vent Kit (2”) √ √ --- --- --- ---

DCVK-30 Horizontal/Vertical Concentric Vent Kit (3”) √ √ √ √ √ √

0170K00000S Flush-mount Vent Kit √ √ √ √ √ √

* White-Rodgers and Honeywell valves

√ Indicates accessories available for this model
1 Indicates 7,001’ to 9,000’ altitude
2 Indicates 9,001’ to 11,000’ altitude
3 Indicates 7,001’ to 11,000’ altitude
Notes
• All installations above 7,000’ require a pressure switch change. For installation in Canada, furnaces are certified only to 4,500’.
• Downflow Floor base: When the GCH9 model is installed directly on a wood floor, a downflow floor
base must be used. Those model numbers are: CFB17, CFB21 and CFB24.

SS-GMH95 www.goodmanmfg.com 11
Product Specifications

Accessories — GCH95

GCH95 GCH95 GCH95 GCH95 GCH95 GCH9

Accessory Description
0453BXA 0703BXA 0704CXA 0904CXA 0905CXA 1155DXA

LPM-06 LP Conversion Kit (Springs & Orifice)* √ √ √ √ √ √

LPLP03 LP Gas Low-Pressure Kit √

GSAS Electronic Air Cleaners (-10, -11, -12, -18) √ √ √ √ √ √

GMU Media Air Cleaners (1620, 2020, 1625, 2025) √ √ √ √ √ √

HANG11 High Altitude Natural Gas Kit 1 1 1 1 1 1

HANG12 High Altitude Natural Gas Kit 2 2 2 2 2 2

HALP10 High Altitude LP Gas Kit 3 3 3 3 3 3

HAPS27 High Altitude Pressure Switch Kit 3 3 3 3 3 3

EFR01 External Filter Rack √ √ √ √ √ √

DCVK-20 Horizontal/Vertical Concentric Vent Kit (2”) √ √ --- --- --- ---

DCVK-30 Horizontal/Vertical Concentric Vent Kit (3”) √ √ √ √ √ √

0170K00000S Flush-mount Vent Kit √ √ √ √ √ √

* White-Rodgers and Honeywell valves

√ Indicates accessories available for this model
1 Indicates 7,001’ to 9,000’ altitude
2 Indicates 9,001’ to 11,000’ altitude
3 Indicates 7,001’ to 11,000’ altitude
Notes
• All installations above 7,000’ require a pressure switch change. For installation in Canada, furnaces are certified only to 4,500’.
• Downflow Floor base: When the GCH9 model is installed directly on a wood floor, a downflow floor
base must be used. Those model numbers are: CFB17, CFB21 and CFB24.

Goodman Manufacturing Company, L.P., reserves the right to discontinue, or change at any time, specifications or designs without
notice or without incurring obligations. © 2013 • Goodman Manufacturing Company, L.P. • Houston, Texas • Printed in the USA.

12 www.goodmanmfg.com SS-GMH95