Scribd
Upload
6 views1 page

Course Module 10 Introduction_Transcript

This document outlines a course module on the Xcelium Simulator v24.03, specifically focusing on its command line interface. It provides guidance on using various commands to control the simulator, including examining designs, monitoring signals, and managing simulations. The module aims to help users effectively utilize the simulator's features.

Uploaded by

Smile Selva Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views1 page

Course Module 10 Introduction_Transcript

This document outlines a course module on the Xcelium Simulator v24.03, specifically focusing on its command line interface. It provides guidance on using various commands to control the simulator, including examining designs, monitoring signals, and managing simulations. The module aims to help users effectively utilize the simulator's features.

Uploaded by

Smile Selva Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

© Cadence Design Systems, Inc. Do not distribute.

CourseTitle :Xcelium Simulator v24.03


VideoTitle :Course Module 10 Introduction
Time : 1.14

The Xcelium™ Simulator Command Line Interface This module will guide you through the Xcelium Simulator's
command line interface.

Time : 10.44

You can learn how to interactively control the simulator by using various commands.

Time : 15.93

Let me help you understand how to use few commands effectively.

Time : 19.71

like examining and traversing the design, reading and writing simulation objects, monitoring signals, setting
breakpoints and running the simulation, saving, resetting and restarting the simulation and finally closing the
simulator.

You might also like