Rev.

A10
February 2023

PowerVault NX Series Product Support Matrix

Introduction
This document provides information about supported software, firmware, and hardware for PowerVault NX Series Network
Attached Storage (NAS) systems.

Topics:
• Revision history
• PowerVault NX Series NAS Systems
• Operating system

NX Series NAS systems are used to add easily managed and cost-optimized file storage to a network. The NAS systems are
optimized servers that are dedicated to file serving (with print server capabilities) and can be managed remotely. The NX Series
systems ship with the Windows Storage Server operating system preinstalled, so the system can be up and running in a short
time.
NOTE: This Support Matrix contains the latest compatibility and interoperability information. If you observe inconsistencies
between this information and other documentation or references, this document supersedes all other documentation.

NOTE: Refer to the Dell EMC Storage NX Windows NAS Series Configuration Guide for configuration examples specific to
your business.

Revision history
Revision Date Description
A00 January 2019 Initial release
A01 May 2019 Add NX440 product information
A02 May 2019 Update disk quantity for NX440
A03 August 2019 Remove NX430
A04 October 2019 Update microprocessor for NX3240 and NX3340
A05 April 2020 Update supported drive lists
A06 August 2020 Add information about supported upgrades
A07 September 2020 Add information about supported FC cards
A08 February 2021 Add information about supported drives and storage options
A09 June 2021 Add 3200 DIMMs
A10 February 2023 Add Windows Server 2016 requirement for customer kits, add support for HBA355e,
update supported drives

Introduction 1
PowerVault NX Series NAS Systems
Dell offers the following NX systems to support different business needs:
● NX3340: Large businesses
● NX3240: Small/midsize businesses
● NX440: Remote/branch offices
The following tables compare the NX systems. Detailed configurations for each system are described in System configurations
and documents.

Feature NX3240 NX3340 NX440

Leveraged Server Platform PowerEdge R740xd PowerEdge R640 PowerEdge R340
Windows Storage Server Standard Standard Standard or Workgroup
2016 Support
Form Factor 2U rack mount 1U rack mount 1U rack mount
Type of Data Supported File and Block (Microsoft File and Block (uses shared File and Block (Microsoft iSCSI
iSCSI target) storage backend) target)
Processor Single and Dual Dual Single
Memory 16 GB or 64 GB 32 GB or 64 GB 8 GB or 16 GB
Number of Internal Data ● 12 front-accessible, hot- ● Two or four front- Four 3.5 in. drives identical in
Drives swap 3.5 in. drives accessible, hot-swap, capacity and type.
and four 3.5 in. drives 2.5 in. drives for the
in mid-bay. Drives in operating system
the mid-bay are not ● The chassis has eight
configured for RAID drive bays, but only two
from the factory. or four operating system
● Two 2.5 in. rear drives are configured
accessible hot-swap as-shipped from the
drives for the operating factory.
system.
Size/Type of Data Drives SATA, NL-SAS, SAS Attached to external block SATA, NL-SAS
Supported storage
External Tape Drive Yes, see NX3240 options Yes, see NX3340 options No
Support
External Scalability Can be expanded to Each platform in clustered Can be expanded to support external,
support external, but is not configuration. but is not preconfigured.
preconfigured.
iSCSI Target Yes Yes Yes
Cluster Support No Yes, up to 64 nodes No
Hardware RAID Levels R1 (operating system) R5 or R1 or R5 (operating system) R5
(factory-installable options) R6 (data)
Hot-Swap Drives Yes Yes Yes
Redundant Fans Yes Yes Yes
Redundant Power Yes (optional) Yes (optional) Yes (optional)

2 Introduction
Operating system
NX Series systems support Windows Storage Server 2016. Windows Storage Server 2016 is available in either Workgroup
or Standard edition. Both the NX3240 and NX3340 ship with Standard edition. The NX440 ships with either Workgroup or
Standard edition. The Standard Edition offers the following premium features:
● Deduplication
● Hosted BranchCache
● Clustering
● Virtualization rights for two VMS
● Network infrastructure for a branch office

Feature Workgroup (NX440 only) Standard

Hardware
Maximum number of CPUs and VM rights 1+0 2+2
Maximum Memory 32 GB Unlimited
# Disks 6 Unlimited
Hardware RAID Yes Yes
Users
Concurrent SMB Connections 250 Unlimited
# Users 50 Unlimited
Software Features
File sharing (SMB and NFS) Yes Yes
Online Backup Yes Yes
DFS-Replication Yes Yes
File Classification Infrastructure (FCI) Yes Yes
File Server Resource Manager (FSRM) Yes Yes
Domain Join Yes Yes
Shared block storage (iSCSI Target + Boot) Yes Yes
OEM Customizable Out of Box Experience Yes Yes
Spaces Yes Yes
Deduplication No Yes
BranchCache - Hosted Cache No Yes
Virtualization No Host + 2 VM
Clustering (including AD/DNS) No Yes
Simplified Cluster Setup No Yes
Networking (DHCP, DNS, and WINS) No Yes
AD Roles including domain controller (RODC) No No
Active Directory (domain controller, Certificate No No
Services, Family of brands Services, Rights
Management)
Application Server, Network Policy, Remote Desktop No No
Broker Agent, WDS, and Fax Server

Introduction 3
System configurations and documents
The NX Series systems are pre-defined, factory-installed configurations based on a parent PowerEdge server. NX Series
systems contain a sub-set of all options that are available on the leveraged server, selected to make it easier to order and install
as an entry-level NAS appliance. The following sections describe each NX Series system configurations and options and the
documentation available.

General configuration notes

NX systems include support for the following features:
● Supports BIOS mode, does not support UEFI or BitLocker
● Supports the PowerVault NX systems resource DVD, see the following documentation for more information:
○ Dell EMC Network Attached Storage System using Windows Storage Server 2016 Administrator's Guide
○ The applicable NAS System Installation and Service Manual
● Supports installing other Windows applications. However, during installation override the default location and install
applications to a location other than the C drive.

NX440 standard configuration

The following table describes the NX440 system standard configurations.

Feature Value Configuration Performance Configuration

Chassis
Drive capacity 4 x 3.5 in. 4 x 3.5 in.
PCIe 3.0 support - two slots: one 8x, one 16x Yes Yes
Hardware
Processor Single: Intel XEON E2124 (8M Single: Intel XEON E2124 (8M
Cache, 4C, 3.3 GHz) Cache, 4C, 3.3 GHz)
Memory 8 GB (1 x 8 GB DIMMs) 16 GB (1 x 16 GB DIMMs)
Standard Bezel Yes Yes
Hot-plug Power Supply, 350 W Single (optional dual) Single (optional dual)
PERC H730P (internal) Yes Yes
Software Operating system drives: RAID 5 (always four HDDs) Yes Yes
Windows Storage Server 2016, Standard or Yes Yes
Workgroup
iDRAC9, Express or Enterprise Yes Yes

NX440 options
These options are available for all NX440 configurations.

Data Drives Always four HDDs for operating system (RAID 5). Drives must all be same speed and capacity.
Second Power Dual, Hot-plug, Redundant Power Supply (1+1), 350 W.
Supply
Optical Internal SATA: DVD+/-RW or DVD ROM
Rack Rail ● ReadyRails with Cable Management Arm
● ReadyRails without Cable Management Arm

4 System configurations and documents

 ● ReadyRails Static Rails for 2/4-post Rails
● 1U Combo Drop-in/Stab-in Rails
Operating System Microsoft Windows Storage System 2016, Workgroups or Standard edition.
Media kit
iDRAC iDRAC9 Enterprise with OpenManage Enterprise
TPM Trusted Platform Module 1.2 or 2.0
NOTE: UEFI and BitLocker are not supported.

Host Bus Adaptors ● Dell SAS 12 Gb HBA

● Dell HBA355e—supported when ordered separately as a Customer Kit.
NIC Supports up to two half-length cards:
● Intel X550 Dual Port 10 GbE Base-T (FH or LP)
● Intel X710 Dual Port 10 Gb DA/SFP+ (FH or LP)
● Intel I350 Dual Port 1 GbE Base-T (FH or LP)
● Intel I350 Quad Port 1 GbE Base-T (FH or LP)
● Broadcom 5720 Dual port 1 GbE Base-T adapter (FH or LP)
● Broadcom 5719 Quad port 1 GbE Base-T adapter (FH or LP)

NX440 upgrades
The following options that are supported on the PowerEdge R340 server can be ordered as separate customer kits for the
NX440 as long as the component supports Windows Server 2016. These options can be installed either by the customer or by an
installation service. The options must be supported on PowerEdge R340 server with the same chassis and riser combination as
the NX440 system.

DIMMs 2666MT/s UDIMMs or 3200MT/s UDIMMs

Network (PCIe) Full or half height
cards
Fibre Channel Supports the same Fibre Channel cards as the parent server that has the exact same chassis and riser
cards combination as the NX system.
Drive support Supports the same customer installable RAID configurations as the parent server.

NX3240 standard configurations

The following table describes the NX3240 system standard configurations:

Feature Entry Configuration Optimal Configuration Performance Configuration

Chassis
Drive capacity
Front bay (Preconfigured to 12 x 3.5 in. 12 x 3.5 in. 12 x 3.5 in.
selected RAID)
Mid bay (require configuration) 4 x 3.5 in. 4 x 3.5 in. 4 x 3.5 in.
Rear bay (operating system 2 x 2.5 in. 2 x 2.5 in. 2 x 2.5 in.
drives): 2.5" drives use a hybrid
carrier
PCI card support
PCIe 3.0 (up to three x8 slots) Yes Yes Yes
Hardware
Processor a Single: Intel Xeon Bronze Dual: Intel Xeon Silver 4208 Dual: Intel Xeon Silver 4214
3204 1.9 G, 6C/6T, 9.6 2.1 G, 8C/16T, 9.6 GT/s 2UPI, 2.2 G, 12C/24T, 9.6 GT/s

System configurations and documents 5

Feature Entry Configuration Optimal Configuration Performance Configuration
GT/s 2UPI, 8.25 MB 11 MB Cache, Turbo, HT (85 2UPI, 16.5 MB Cache, Turbo,
Cache, No Turbo, No HT W) DDR4-2400 HT (85 W) DDR4-2400
(85 W) DDR4-2133
Memory 16 GB (2 x 8 GB DIMMs) 32 GB (4 x 8 GB DIMMs) 64 GB (4 x 16 GB DIMMs)
LCD Bezel Yes Yes Yes
Single, Hot-plug Power Supply Yes Yes Yes
(1+0), 750 W
PERC H730p (internal) Yes Yes Yes
Broadcom 5720 QP 1 Gb Yes Yes Yes
Network Daughter Card
Operating system drives: RAID 1 Yes Yes Yes
- (min. two HDDs) 600 GB 10K
2.5" SAS
Software
Windows Storage Server 2016 Yes Yes Yes
iDRAC9, Enterprise Yes Yes Yes

a. Systems shipping before September 2019 use the following processors:

● Entry—Intel Xeon Bronze 3104 1.7G
● Optimal—Intel Xeon Bronze 3106 1.7G
● Performance—Intel Xeon Silver 4114 2.2G

NX3240 options
These options are available for all NX3240 configurations.

External RAID PERC H840

Data Drives Data drives are RAID 5 or RAID 6. A minimum of four HDDs is required, and they must all be same speed
and capacity. The 2.5 in. drives use a hybrid carrier.

Interface Form Speed Capacity

Factor
SATA 3.5 in. 7.2 K 2 TB, 4 TB
SAS 3.5 in. 4.2 K 4 TB, 8 TB, 8 TB FIPS, 10 TB, 12 TB
SAS 2.5 in. 10 K 600 GB, 1.2 TB, 1.2 TB FIPS, 1.8 TB

External Tape ● External RD1000 USB

Drive Support ● External LTO-5, LTO-6, LTO-7 and LTO-8 and 6 Gb SAS tape drives
● External LTO-9 12Gb SAS tape drives
● 114X rack mount chassis with LTO-5, LTO-6 and LTO-7 and LTO-8 6 Gb SAS tape drives
● 114X rack mount chassis with LTO-9 12Gb SAS tape drives
● TL1000 with LTO-5, LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● TL1000 with LTO-9 12Gb SAS tape drives
● TL2000 with LTO-5, LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● TL4000 with LTO-5, LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● TL4000 with LTO-5, LTO-6 and LTO-7 and LTO-8 8Gb FC tape drives
● ML3/ML3e with LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● ML3/ML3e with LTO-9 12Gb SAS tape drives
● ML3/ML3e with LTO-6 and LTO-7 and LTO-8 8Gb and LTO-9 FC tape drives
Optical 8X DVD-ROM, USB, external

6 System configurations and documents

Second Power ● Dual, Hot-plug, Redundant Power Supply (1+1), 750 W
Supply ● Dual, Hot-plug, Redundant Power Supply (1+1), 1100 W
Rack Rail ● ReadyRails with Cable Management Arm
● ReadyRails without Cable Management Arm
● ReadyRails Static Rails for 2/4-post Rails
● 2U Combo Drop-in/Stab-in Rails
Operating System Microsoft Windows Storage System 2016, Standard edition.
Media kit
iDRAC iDRAC9 Enterprise with OpenManage Enterprise
TPM Trusted Platform Module 1.2 or 2.0
NOTE: UEFI and BitLocker are not supported.

Quick Sync 2 Remote mobile wireless access

Host Bus Adaptors ● Dell SAS 12 Gb HBA
● Dell HBA355e—supported when ordered separately as a Customer Kit.
NIC: Supports up to four cards—three full height, full-length cards (slots 1–3), and one low profile, half-length
card (slot 3):
● Broadcom 57414 Dual Port 25 Gb, SFP28, rNDC
● Broadcom 57416 Dual Port 10 Gb Base-T + 5720 Dual Port 1 Gb Base-T rNDC
● Broadcom 57412 Dual Port 10 Gb SFP+ + 5720 Dual Port 1 Gb Base-T rNDC
● Broadcom 5720 Quad Port 1 Gb NDC
● Intel X550 Quad Port 10 GbE, Base-T rNDC
● Intel X550 Dual Port 10 GbE, Base-T + I350 Dual Port 1 Gb Base-T rNDC
● Intel X710 Dual Port 10 Gb DA/SFP+ + I350 Dual Port 1 Gb Ethernet NDC
● Intel X710 Quad Port 10 Gb DA/SFP+ Ethernet NDC
● Intel I350 Quad Port 1 GbE NDC
● Mellanox Connect X-4 Lx Dual Port 25 GbE DA/SFP rNDC
● QLogic 57800 2x10 Gb BT + 2x1Gb BT NDC
● QLogic 57800 2x10 Gb DA/SFP+ + 2x1 Gb BT Network DDC

NX3240 upgrades
The following options that are supported on the PowerEdge R740xd server can be ordered as separate customer kits for the
NX3240 as long as the component supports Windows Server 2016. These options can be installed either by the customer or
by an installation service. The options must be supported on a PowerEdge R740xd server with the same chassis and riser
combination as the NX3240 system.

DIMMs 2666MT/s RDIMMs or 3200MT/s RDIMMs

Network (PCIe) Full or half height
cards
Fibre Channel Supports the same Fibre Channel cards as the parent server that has the exact same chassis and riser
cards combination as the NX system.
Processor Second Intel Xeon Bronze 3204
Drives ● Hard drive and SSD data drives
● Drives in the front and mid-bay must match in capacity and quantity
● Supports the same customer installable RAID configurations as the parent server

System configurations and documents 7

NX3340 standard configurations
The following table describes the standard configurations for NX3340 systems:

Feature Optimal Configuration Performance Configuration

Chassis
Drive capacity: System ships from the factory 8 x 2.5 in. 8 x 2.5 in.
with either two or four operating system drives.
PCIe 3.0 support (up to three x16 slots) Yes Yes
Hardware
Processor a Dual: Intel Xeon Silver 4208 2.1 G, Dual: Intel Xeon Silver 4214 2.2 G,
8C/16T, 9.6 GT/s 2UPI, 11 MB Cache, 12C/24T, 9.6 GT/s 2UPI, 16.5 MB
Turbo, HT (85 W) DDR4-2400 Cache, Turbo, HT (85 W) DDR4-2400
Memory 32 GB (4 x 8 GB DIMMs) 64 GB (4 x 16 GB DIMMs)
LCD Bezel Yes Yes
Single, Hot-plug Power Supply (1+0), 750 W Yes Yes
PERC H730p (internal) Yes Yes
Broadcom 5720 QP 1 Gb Network Daughter Yes Yes
Card
Operating system drives: Yes Yes
● RAID 1 (two HDDs min.) or RAID 5 (min.
four HDDs)
● 600 GB 2.5" SAS 10K
Software
Windows Storage Server 2016 Yes Yes
iDRAC9, Enterprise Yes Yes

a. Systems shipping before September 2019 use the following processors:

● Optimal—Intel Xeon Bronze 3106 1.7G
● Performance—Intel Xeon Silver 4114 2.2G

NX3340 options
These options are available for all NX3340 configurations.

External RAID Perc H840

External Tape ● External RD1000 USB
Drive Support ● External LTO-5, LTO-6, LTO-7 and LTO-8 and 6 Gb SAS tape drives
● External LTO-9 12Gb SAS tape drives
● 114X rack mount chassis with LTO-5, LTO-6 and LTO-7 and LTO-8 6 Gb SAS tape drives
● 114X rack mount chassis with LTO-9 12Gb SAS tape drives
● TL1000 with LTO-5, LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● TL1000 with LTO-9 12Gb SAS tape drives
● TL2000 with LTO-5, LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● TL4000 with LTO-5, LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● TL4000 with LTO-5, LTO-6 and LTO-7 and LTO-8 8Gb FC tape drives
● ML3/ML3e with LTO-6 and LTO-7 and LTO-8 6Gb SAS tape drives
● ML3/ML3e with LTO-9 12Gb SAS tape drives
● ML3/ML3e with LTO-6 and LTO-7 and LTO-8 8Gb and LTO-9 FC tape drives
Optical Internal SATA: DVD+/-RW or DVD ROM

8 System configurations and documents

Second Power Dual, Hot-plug, Redundant Power Supply (1+1), 750 W.
Supply
Rack Rail ● ReadyRails with Cable Management Arm
● ReadyRails without Cable Management Arm
● ReadyRails Static Rails for 2/4-post Rails
● 1U Combo Drop-in/Stab-in Rails
Operating System Microsoft Windows Storage System 2016, Standard edition.
Media kit
iDRAC iDRAC9 Enterprise with OpenManage Enterprise.
TPM Trusted Platform Module 1.2 or 2.0
NOTE: UEFI and BitLocker are not supported.

Quick Sync 2 Remote mobile wireless access

Host Bus Adaptors ● Dell SAS 12 Gb HBA
● Dell HBA355e—supported when ordered separately as a Customer Kit.
NOTE: The SAS cable connection may not latch securely when using a SAS card in PCIe slot 2. If
possible, use only slot 1 and slot 3 for SAS HBAs.

NIC Supports up to three low profile, half-length cards:

● Broadcom 57414 Dual Port 25 Gb, SFP28, rNDC
● Broadcom 57416 Dual Port 10 Gb Base-T + 5720 Dual Port 1 Gb Base-T rNDC
● Broadcom 57412 Dual Port 10 Gb SFP+ + 5720 Dual Port 1 Gb Base-T rNDC
● Broadcom 5720 Quad Port 1 Gb NDC
● Intel X550 Quad Port 10 GbE, Base-T rNDC
● Intel X550 Dual Port 10 GbE, Base-T + I350 Dual Port 1 Gb Base-T rNDC
● Intel X710 Dual Port 10 Gb DA/SFP+ + I350 Dual Port 1 Gb Ethernet NDC
● Intel X710 Quad Port 10 Gb DA/SFP+ Ethernet NDC
● Intel I350 Quad Port 1 GbE NDC
● Mellanox Connect X-4 Lx Dual Port 25 GbE DA/SFP rNDC
● QLogic 57800 2x10 Gb BT + 2x1Gb BT NDC
● QLogic 57800 2x10 Gb DA/SFP+ + 2x1 Gb BT Network DDC

NX3340 upgrades
The following options that are supported on the PowerEdge R640 server can be ordered as separate customer kits for the
NX3340 as long as the component supports Windows Server 2016. These options can be installed either by the customer or by
an installation service. The options must be supported on a PowerEdge R640 server with the same chassis and riser combination
as the NX3340 system.

DIMMS 2666MT/s RDIMMs or 3200MT/s RDIMMs

Network (PCIe) Half height
cards
Fibre Channel Supports the same Fibre Channel cards as the parent server that has the exact same chassis and riser
Cards combination as the NX system.
Drive support Supports the same customer installable RAID configurations and drives as the parent server.

System configurations and documents 9

Documentation
The following documentation is available for NX Series systems.

NX440
The following documents are available at NX440 Manuals & documents on dell.com/support:
● NX440 Installation and Service Manual
● Dell EMC NAS System using Windows Storage Server 2016 Administrator's Guide
● Dell EMC NAS System using Windows Storage Server 2016 Troubleshooting Guide
● Setting up your NX440 System

NX3240
The following documents are available at NX3240 Manuals & documents on dell.com/support:
● NX3240 Installation and Service Manual
● Dell EMC NAS System using Windows Storage Server 2016 Administrator's Guide
● Dell EMC NAS System using Windows Storage Server 2016 Troubleshooting Guide
● Setting up your NX3240 and NX3340 System

NX3340
The following documents are available at NX3340 Manuals & documents on dell.com/support:
● NX3340 Installation and Service Manual
● Dell EMC NAS System using Windows Storage Server 2016 Administrator's Guide
● Dell EMC NAS System using Windows Storage Server 2016 Troubleshooting Guide
● Setting up your NX3240 and NX3340 System

Supported hard drives

This section describes the drives that are supported in each NX Series system. To find the latest available drive firmware, see
the related Drivers and Downloads section on Dell.com/support

NOTE: Some drives in these lists may no longer be supported.

NX440 supported drives

Dell P/N Form Factor Capacity Interface Speed Security Vendor
0N96X 3.5 12 TB SAS 12 Gbps 7.2K ISE TOS
7KT9W 3.5 12 TB SAS 12 Gbps 7.2K ISE STX
9HXK6 3.5 12 TB SAS 12 Gbps 7.2K ISE HGST
DK7C9 3.5 12 TB SAS 12 Gbps 7.2K ISE TOS
753F0 3.5 12 TB SATA 6 Gbps 7.2K ISE TOS
T2YHT 3.5 12 TB SATA 6 Gbps 7.2K ISE HGST
0N660 3.5 8 TB SAS 12 Gbps 7.2K ISE STX

10 Supported hard drives

Dell P/N Form Factor Capacity Interface Speed Security Vendor
44YFV 3.5 8 TB SAS 12 Gbps 7.2K ISE WD
FV725 3.5 8 TB SAS 12 Gbps 7.2K ISE TOS
1WMVC 3.5 8 TB SATA 6 Gbps 7.2K ISE HGST
9X09C 3.5 8 TB SATA 6 Gbps 7.2K ISE TOS
F4JXT 3.5 8 TB SATA 6 Gbps 7.2K ISE STX
10N7R 3.5 4 TB SAS 12 Gbps 7.2K ISE STX
F7DTR 3.5 4 TB SAS 12 Gbps 7.2K ISE STX
FN2YX 3.5 4 TB SAS 12 Gbps 7.2K ISE TOS
6KR2M 3.5 4 TB SATA 6 Gbps 7.2K ISE STX
W2M9N 3.5 4 TB SATA 6 Gbps 7.2K ISE TOS
XPJ47 3.5 4 TB SATA 6 Gbps 7.2K ISE STX
YH3T9 3.5 4 TB SATA 6 Gbps 7.2K ISE HGST
V9H6C 3.5 2 TB SATA 6 Gbps 7.2K ISE HGST

NX3240 supported drives

Dell P/N Form Factor Capacity Interface Speed Security Supplier
F9NWJ 2.5 2.4TB SAS 12 Gbps 10K ISE TOS
8YWH3 2.5 2.4TB SAS 12 Gbps 10K SED FIPS STX
RWR8F 2.5 2.4TB SAS 12 Gbps 10K ISE TOS
DMP3R 2.5 1.2TB SAS 12 Gbps 10K SED FIPS STX
FPW68 2.5 600GB SAS 12 Gbps 15K ISE
GTYCR 2.5 600GB SAS 12 Gbps 10K None STX
VWDPV 2.5 600GB SAS 12 Gbps 10K ISE STX
XXTRP 2.5 600GB SAS 12 Gbps 10K ISE STX
0N96X 3.5 12 TB SAS 12 Gbps 7.2K ISE TOS
7KT9W 3.5 12 TB SAS 12 Gbps 7.2K ISE STX
9HXK6 3.5 12 TB SAS 12 Gbps 7.2K ISE HGST
DK7C9 3.5 12 TB SAS 12 Gbps 7.2K ISE TOS
753F0 3.5 12 TB SATA 6 Gbps 7.2K ISE TOS
KTJTY 3.5 12 TB SATA 6 Gbps 7.2K ISE STX
T2YHT 3.5 12 TB SATA 6 Gbps 7.2K ISE HGST
0N660 3.5 8 TB SAS 12 Gbps 7.2K ISE STX
44YFV 3.5 8 TB SAS 12 Gbps 7.2K ISE WD
C5HD0 3.5 8 TB SAS 12 Gbps 7.2K ISE STX
FV725 3.5 8 TB SAS 12 Gbps 7.2K ISE TOS
H3PN0 3.5 8 TB SAS 12 Gbps 7.2K SED FIPS STX
NJWMG 3.5 8 TB SAS 12 Gbps 7.2K ISE TOS

Supported hard drives 11

Dell P/N Form Factor Capacity Interface Speed Security Supplier
1WMVC 3.5 8 TB SATA 6 Gbps 7.2K ISE HGST
9X09C 3.5 8 TB SATA 6 Gbps 7.2K ISE TOS
F4JXT 3.5 8 TB SATA 6 Gbps 7.2K ISE STX
T5XR5 3.5 8 TB SATA 6 Gbps 7.2K ISE TOS
10N7R 3.5 4 TB SAS 12 Gbps 7.2K ISE STX
F7DTR 3.5 4 TB SAS 12 Gbps 7.2K ISE STX
FN2YX 3.5 4 TB SAS 12 Gbps 7.2K ISE TOS
KRM6X 3.5 4 TB SAS 12 Gbps 7.2K ISE STX
NT1X2 3.5 4 TB SAS 12 Gbps 7.2K ISE WD
6KR2M 3.5 4 TB SATA 6 Gbps 7.2K ISE STX
W2M9N 3.5 4 TB SATA 6 Gbps 7.2K ISE TOS
XPJ47 3.5 4 TB SATA 6 Gbps 7.2K ISE STX
YH3T9 3.5 4 TB SATA 6 Gbps 7.2K ISE HGST
684JT 3.5 2 TB SAS 12 Gbps 7.2K ISE STX
HDWXN 3.5 2 TB SAS 12 Gbps 7.2K ISE STX
M7D8Y 3.5 2 TB SAS 12 Gbps 7.2K None TOS
NPVM6 3.5 2 TB SATA 6 Gbps 7.2K ISE TOS
V9H6C 3.5 2 TB SATA 6 Gbps 7.2K ISE HGST
X7C91 3.5 2 TB SATA 6 Gbps 7.2K ISE STX
HNWHH 3.5 1 TB SATA 6 Gbps 7.2K ISE HGST
K4M5W 3.5 1 TB SATA 6 Gbps 7.2K ISE TOS
M33YT 3.5 1 TB SATA 6 Gbps 7.2K ISE STX

NX3340 supported drives

Dell P/N Form Factor Capacity Interface Speed Security Supplier
01M0D 2.5 1.2 TB SAS 12 Gbps 10K ISE TOS
DMP3R 2.5 1.2 TB SAS 12 Gbps 10K SED FIPS STX
1D0F5 2.5 2.4 TB SAS 12 Gbps 10K ISE STX
36YG1 2.5 2.4 TB SAS 12 Gbps 10K ISE STX
F9NWJ 2.5 2.4 TB SAS 12 Gbps 10K ISE TOS
RWR8F 2.5 2.4 TB SAS 12 Gbps 10K ISE STX
1W7HC 2.5 600 GB SAS 12 Gbps 15K ISE TOS
4WX8Y 2.5 600 GB SAS 12 Gbps 10K ISE TOS
GTYCR 2.5 600 GB SAS 12 Gbps 10K None TOS
VWDPV 2.5 600 GB SAS 12 Gbps 10K ISE STX
XXTRP 2.5 600 GB SAS 12 Gbps 10K ISE STX

12 Supported hard drives

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

© 2019 - 2023 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its
subsidiaries. Other trademarks may be trademarks of their respective owners.