NOTE:

Please read all instructions carefully before

using this product
AeroCreeper
Adjustable Height Creeper
AC1001
AC1001A
AC1002
AC1003

AEROCREEPER
2709 Mule Ranch Cir
Corinne, UT 84307
OWNER'S MANUAL Tel: (435) 744-1019
http://www.aerocreeper.com
Retain This Manual for Reference [email protected]
Table of Contents
BEFORE YOU BEGIN................................................................................................................................................................. 2
IMPORTANT SAFETY NOTICE................................................................................................................................................... 2
AEROCREEPER CARE AND MAINTENANCE .............................................................................................................................. 3
Cleaning............................................................................................................................................................................... 3
Annual inspection recommendations: ................................................................................................................................ 3
AEROCREEPER OPERATION GUIDELINES ................................................................................................................................ 3
Adjusting the Manual AeroCreepers (AC1001, AC1001A, AC1002).................................................................................... 3
Adjusting the Power-Lift AeroCreeper (AC1003) ................................................................................................................ 5
Using the AeroCreeper (AC1001, AC1001A, AC1002, AC1003) .......................................................................................... 6
Transporting the Creeper (AC1001, AC1001A, AC1002, AC1003) ...................................................................................... 7
WARNING LABEL PLACEMENT ................................................................................................................................................ 8
RETURN & REFUND POLICY ..................................................................................................................................................... 9
1-YEAR MANUFACTURER’S WARRANTY ................................................................................................................................. 9

1
BEFORE YOU BEGIN
Thank you for selecting the AeroCreeper. For your safety and benefit, read this manual carefully before using the
creeper. As a manufacturer, we are committed to provide you with complete customer satisfaction. If you have any
questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance
from our factory.

1-435-744-1019
Mon. – Fri. 8 a.m. – 5 p.m. MST
www.aerocreeper.com
[email protected]

IMPORTANT SAFETY NOTICE

This AeroCreeper is built for optimum safety. However, certain precautions apply whenever you operate the
AeroCreeper. Be sure to read the entire manual before you operate your creeper. In particular, note the following safety
precautions:

1. Keep children and pets away from the equipment at all times. DO NOT leave children unattended in the same
room with the creeper.
2. Only one person at a time should use the equipment.
3. Position the equipment on a level surface.
4. Keep hands away from all moving parts.
5. Beware of loose clothes, loose skin or long hair that could be caught in the wheels.
6. Use the creeper only for its intended use as described in this manual.
7. Keep all sharp objects away from the seat cushions.
8. Inspect for any loose or broken pieces. Never operate the creeper if the creeper is not functioning properly.
9. Be aware of cracks, debris or tools on the floor that could cause tipping hazards when the creeper is in the upper
positions.
10. Max capacity of creeper is 350lb (155 kg). This includes your body weight and any additional force applied
(e.g. pushing on a wrench, rivet gun, etc.)
11. Do not drop down on creeper or bounce while using creeper.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other
reproductive harm

SAVE THESE INSTRUCTIONS.

2
AEROCREEPER CARE AND MAINTENANCE
With some minimal care and maintenance, your AeroCreeper should serve well for many years to come.

Cleaning
Clean the upholstery pads and other surfaces with a damp cloth. Test any cleaner in a hidden area to ensure it won’t
damage or discolor the vinyl pads. Some solvents and cleaners may damage the upholstery.

Annual inspection recommendations

✓ Ensure that warning labels are in place and readable. (See “Warning Label Placement” on page 8). Replacement
labels can be acquired at www.aerocreeper.com or email [email protected] .
✓ Clean and inspect unit for signs of excessive wear, cracked welds, and loose or missing fasteners.
✓ Check wheels for excessive wear. Replace if necessary.
✓ Manual-adjusting models only: Check positioning teeth that are under the seat for signs of overloading or
deformation. Replace if any teeth have been damaged to the point that they might not support the worker.
✓ Power-lift model only: Make sure the bolt in the end of the actuator rod is tight.

AEROCREEPER OPERATION GUIDELINES

Adjusting the Manual AeroCreepers (AC1001, AC1001A, AC1002)

WARNING:

● Make sure seat is engaged before mounting.

● Do not adjust while seated (get off to adjust)
● Keep hands and fingers away from moving parts.

3
 ADJUSTING THE CREEPER HEIGHT (AC1001 AND AC1001A)

To Raise Creeper To Lower Creeper

Lift here to
unlatch

Lift here to Support

raise here
while
lowering
Let seat engage at desired height. Ensure Let seat engage at desired height. Ensure
locked in position before mounting. locked in position before mounting.

ADJUSTING THE CREEPER HEIGHT (AC1002)

To Raise Creeper To Lower Creeper

Lift here
to unlatch

Lift here to Support

raise here while
lowering

Let teeth engage at desired height. Ensure Let teeth engage at desired height. Ensure
locked in position before mounting. locked in position before mounting.

ADJUSTING THE SEAT ANGLE (AC1002)

To Raise Seat Angle To Lower Seat Angle

Lift seat
Let tab to raise Lift tab to
engage release

Ensure locked in position before mounting.

WARNING: Be cautious about not lifting on the front of the seat while on the creeper to avoid unintentionally lowering
the creeper while you are on it. This can be done unintentionally by someone who is not familiar with the creeper as
they try to adjust it or move around on it.

4
Adjusting the Power-Lift AeroCreeper (AC1003)

WARNING:

1. Use caution when adjusting AeroCreeper while under equipment to prevent creeper from raising you into
bottom of equipment.
2. Whenever possible, you should adjust to the desired height before rolling under equipment. This will prevent
creeper from going up too fast causing you to crash into the bottom of the equipment.
3. Creeper is designed with two rocker switches, and both must be pressed to move the creeper. This is to prevent
accidental movement of the creeper and to keep hands in a safe position while adjusting the creeper.
4. Before each use, test the rocker switches one at a time to ensure creeper will not move when only one is
pressed and are not sticking in either direction.
5. Never bypass safety switches.
6. If creeper is not working as intended, stop using immediately (e.g., if there is any undesired movement)
7. Be aware there is a potential for the creeper to fail to raise while in the bottom position (e.g., the battery runs
out of charge). If you are disabled and rely on the creeper to raise you up, always have an alternate option to
get up (e.g., have a spare battery, have someone nearby to help, keep a cell phone with you, etc.)
8. This relies on electrical connections and sparks may occur. Keep away from flammable objects.

ADJUSTING THE CREEPER HEIGHT (AC1002)

To lower, press down

on the back two rocker
switches at the same
time

To raise, press down

on the front two
rocker switches at the
same time

5
Using the AeroCreeper (AC1001, AC1001A, AC1002, AC1003)

WARNING: When adjusting the creeper, make sure your hands are located as shown in the diagram to avoid injury to
hands and fingers. Diagram below shows Safe Zones for hands and fingers and Danger Zones.

Pinch Points - Grab Here

Don’t Grab Here

WARNING: When using the creeper in the lower position, beware of potential hazards caused by the casters. Long hair
and loose clothing can get caught in the casters. Avoid hitting arms and shoulders on caster fasteners. Loose skin can
get caught on the top side of the caster between the metal caster housing and the wheel. If this is a concern, skin
guards are available at www.aerocreeper.com.

Potential pinch
point for loose
skin or clothing
between wheel
and caster
housing

6
WARNING: Beware that when sitting on the creeper, the back of the creeper sticks out and as you rotate, could cause
injury or damage to property. The red zones in the images below show the area that should be clear to avoid injury or
property damage when spinning around.

When sitting on the creeper while it is in the top positions, the back casters stick out as shown in the picture below.

When sitting on the creeper while it is in the middle and lower positions, the backrest sticks out as shown in the picture
below.

Transporting the Creeper (AC1001, AC1001A, AC1002, AC1003)

Push like a shopping cart to Carry under arm to keep it
move around the shop. from opening up.

WARNING: Failure to transport creeper as shown could cause the creeper to open and close, injuring hands and fingers.

7
WARNING LABEL PLACEMENT
The following warning labels should be placed as shown. If the labels are missing or illegible, please call customer service
(https://www.aerocreeper.com/contact-us).

8
RETURN & REFUND POLICY
If for any reason you are not satisfied with your AeroCreeper, you may return it within 30 days for a full refund. To be
eligible for a refund, the creeper must be in good condition and returned in its original packaging.

Details: Contact us through our website (https://www.aerocreeper.com/contact-us) and provide your email address for
a return authorization. Once you receive the return authorization, ship the packaged creeper to our address. Upon
receipt, we will inspect it. If it is in good condition, we will initiate a refund to your credit card (or original method of
payment) of the full purchase price – not including shipping charges.

1-YEAR MANUFACTURER’S WARRANTY

At AeroCreeper, we stand by our products and take pride in our customer service. If we did something wrong, we’ll
make it right. We guarantee that our product will be free of defects in materials and manufacturing (excluding normal
wear & tear).

Details: Warranty is valid for 1 year from date of purchase. This warranty does not apply to damage caused by misuse,
abuse, negligence, alteration, or natural disasters (i.e., flooding, earthquakes). To take advantage of this warranty,
contact us through our website (https://www.aerocreeper.com/pages/contact) with an explanation of the complaint.

AeroCreeper may require photographs to verify the materials or manufacturing defects. Depending on the nature of the
defect, we may provide replacement parts that you will install or a replacement creeper. If we cannot readily and quickly
provide you with a solution, we may elect to refund the purchase price.

Once the warranty expires all liability will be terminated. No other warranties are expressed or implied.

Due to the cost of shipping, customers outside of the contiguous 48 states will bear the cost for shipping parts,
replacements, and returns.