Scribd
Upload
13 views6 pages

Networking - Set A

The document outlines a comprehensive guide for configuring computer systems and networks, including disassembly, assembly, and testing of client computers. It details the installation of operating systems, network cabling, router configuration, user access setup, and network service installations like Active Directory and DHCP. Additionally, it includes maintenance procedures for computer systems and networks, along with a maintenance service form and checklist.

Uploaded by

Daniel Gamponia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
13 views6 pages

Networking - Set A

The document outlines a comprehensive guide for configuring computer systems and networks, including disassembly, assembly, and testing of client computers. It details the installation of operating systems, network cabling, router configuration, user access setup, and network service installations like Active Directory and DHCP. Additionally, it includes maintenance procedures for computer systems and networks, along with a maintenance service form and checklist.

Uploaded by

Daniel Gamponia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

NETWORKING A

A. Configure Computer Systems


A.1.Disassemble the client computer
 Identifying Computer Parts and its peripherals (includes input/output ports, basic parts of the computer and other
parts internal hardware)
 System Specification
A.2.Assemble the parts and conduct testing
A.3.Set boot sequence into the BIOS sequence
B.Install Operating and Application Software
1.Prepare and create bootable installer using flash drive SERVER
2.Install an Operating System in the SERVER and CLIENT
3.Create a partition hard drive (C:70%, D:30%) and installing operating system
4.Set the Server password to @bstc1234
C.Install Network Cables
C.1.Design and Draw Network Layout (Network Service Form)
C.1. Create and connect T568-B cable based on the following cable measurements:
2-Client/Server(Pc) to Modular Box(approx.2m)
2-Client/Server(Modular Box) to Patch Panel (approx.1m) using T-568A
2-Client/ Server(Modular Box) to Patch Panel (approx.1m) using T-568A
1-Router to Patch Panel (approx.0.5m)
1-Router Patch Panel to Hub (approx.0.5m)
1-Wireless Access Point (WAP) (approx.0.5m)
1-WAP’s Patch Panel to Hub(approx.0.5m)
C.3 Conduct testing on connectivity of wires/cables

D. Configure Networks
1.Configure the router’s IP address using CLASS A PRIVATE IP ADDRESS
2.Set-up router Service Set Identifier(SSID) using LASTNAME and PASSWORD to @abc1234
3.Set-up router Service Set Identifier(SSID) using FIRSTNAME and PASSWORD to @abc1234
4.Conduct testing on router and wap connection
E.Set-up User Access
1.Set Workgroup and computer description
2.Assign Computer name of CLIENT using your FIRSTNAME
3. Assign Computer name of SERVER using your LASTNAME
4.Use Class A static Internet Protocol Address on Server and Dynamic IP Address on Client
5.Conduct Testing on connectivity Between CLIENT and SERVER
D.Configure and Perform Testing of Network Services
1.Install Active Directory Service based on the above IP Address with Domain (Name:BSTC.org)
2.Install Domain Name Service (DNS)
 Forward and reverse lookup zone
3. Install Domain Host Control Protocol (DHCP)
4. Install File Services
 Drive D/E:Users/Account
5.Configure Folder Redirection under the User Configuration select Desktop, Picture and Music
6.Create User Account: Name of 2 Trainees Full name
7.Configure File Resource Manager,select Audio,Video and Executable files.
8.Remote Desktop Connection Server and Client
9.Conduct testing and perform file and printer sharing as follows:
 Install and share printer to server and add printer to Client
 Provide sample document in notepad using your data: Name, Address, Contact No. and
Company/Institution
G.Repair Computer Systems and Network
G.1.Plan and Prepare for Maintenance service using the Maintenance Service Form
G.2.Identify Fault/Defect and Possible cause of defect in computer systems and networks
G.3.Perform repair/replace of the defective parts/components.
H.Maintain Computer Systems and Networks
H.1.Fill out the Maintenance Service Form
H.2.Create back up or system image of User’s Folder
H.3.Create Restoreor system image of User’s Folder
Maintenance Form
A.Checklist
Tools,Equipment and Testing Devices Condition
Screwdriver
Mechanical pliers
Multitester
Lan tester
Anti-static devices
Router
Wireless Access Point
Modular box
Desktop Computer
Uninterruptible Power Supply
B.DIAGNOSIS
Indentified Cause/Symptoms

Actual Stage/Components

Rectifications

Remarks

C.MAINTENANCE-CREATED BACK UP
Date and Time
Files Back Up
Size Capacity
D. MAINTENANCE-RESTORED/RECOVERED BACK UP
Date and Time
Files Back Up
Size Capacity

Network Service Form


Design and Draw Network Layout (Network Service Form)
Create and connect T568-B cable based on the following cable measurements:
2-Client/Server(Pc) to Modular Box(approx.2m)
2-Client/Server(Modular Box) to Patch Panel (approx.1m) using T-568A
2-Client/ Server(Modular Box) to Patch Panel (approx.1m) using T-568A
1-Router to Patch Panel (approx.0.5m)
1-Router Patch Panel to Hub (approx.0.5m)
1-Wireless Access Point (WAP) (approx.0.5m)
1-WAP’s Patch Panel to Hub(approx.0.5m)

Identifying Computer Parts and its peripherals (includes input/output ports, basic parts of the computer and other parts
internal hardware)
System Specification

You might also like