ANTI SPY

DETECTOR
The K18 detector adopts German advanced technology Firstly install the antenna and turn the knob clockwise to turn
and is designed for the market of all kinds of bugs, on the machine. As the Power LED and MS LED light up, RF signal
surveillance cameras, wireless pinhole came 『as, detection works. When the Signal indicator reaches the 7th level,
car trackers, mobile phone undercover software, K18 will make a vibration or sound. The vibration /sound mode
K18
casino fraud devices and other products, targeted can be switched by short pressing M key. The higher the Signal
development of security and prevention instruments. indicator level is, the stronger RF signal and closer the distance
to the suspicious equipment.
This product is currently the most advanced and
portable wireless signal and magnetic币eld detection
equipment. It can protect our safety and secrets
e仔ectively.

Install the antenna

国嗡主

7 Laser lens
• It has high sensitivity, wide application range
8 Azimuth circle

02
and wide detection frequency.
Mode switch &
• It can detect 2G,3G,4G spectrum mobile phone Sound/Vibration switch
No. Function 10 RF mode LED
SIM card bug and GPS locator
Antenna interface 11 Laser switch
• It can detect 1.2g to 5.Bg wireless or wired 2 12
GS probe interface Magnetic mode LED
camera equipment. 3 Powe「LED 13 ）
Signal indicator ）
• It can detect magnetic suction positioner and bug. 4 On/Off key & Sensitive adjuster 14 LED Laser lamp

K18
5 Charge LED
6 USB charging power supply

[ GPS T …… VICE �ECHNICAL SPECIFICATION

Model
:
Firstly install the GS probe and turn the knob clockwise to turn Short press the Laser switch to turn on/o仔 the LED laser lamp. • The interceptor and t『acker are usually placed inside the car, K18
on the machine. Then long press M for 3 seconds. As GS LED lights Long press the Laser switch to change the flashing frequency of Soernf,cat,on
the bottom, front or back of the car. Kl 8 is easy to 币nd strong Frequency ran囚e 1MHZ-8αlOMHZ
up, magnetic detection works. You can switch between magnetic the LED laser lamp. Keep environment dark, and make lase 『 light magnetic adsorption devices such as GPS locator when magnetic Probe dynamic ran口e >73DB

��：
detection and RF signal detection mode by long pressing M. When face to suspicious camera. Then your eyes look through the laser Detection sens,tiv,ty :S0.03mv
detection mode works and the GS probe is close to the area.
Detection range 2.4G:10 square meters
the GS probe is close to the magnetic白eld sou 『ce, the LED of the lens, and the position of the cam era will be determined by the 1.2G:15 squa「·e meters ＼�＼���8;� :J)

／
GS probe will light up, and K18 will m ake a vibration or sound. reflected light of camera lens. Mobile phone spectrum 2G.3G.4G
The vibration/sound mode can be switched by short pressing M. Signal 15 square meters
When the Signal indicator is fully on, it means it is close to the Power supply Built-in 3.7V 1000ma polymer lithium battery
suspicious object. 。咀rging time 2.5 hours
Ope「-ating cu「rent 60斗1OmA, continuous working 4-5 hours
Material ABS metal
Weight 1509
Volume 117x 56x20 mm
Place the magnetic
probe near the area
to test.
F 飞
SCOPE OF APPLICATION
Short press to turn
口n the laser light When searching for the car tracker，白rstly drive
• Whether the car, office or mobile phone is equipped with
the vehicle to the place where the signal is weak,
皿会副 「

Item Quantity
n

回 耐 川川 一

wireless bug or tracking locator or wireless monitoring system.

〔川U 刊川川川山
门川Ur t
U

Long press can and then turn off the devices with signal source,
change flashing such as mobile phone, etc. • Check the hotel,places of entertainment, dressing room, Host
HHH扎一

frequency government organs, business negotiation, school invigilation, Antenna

们U F

workshop and military industrial facilities.

GS probe
－

• Household appliances, such as microwave oven and

RF GS DET在CTOR
Charo er
other electro magnetic radiation leakage detection.
Turn o仔the ph ne 。 Manual
• Whether there is a base station radiation near your working
。『。
f perati n。
condition or living condition.
Note: Please use the original charger before use.
FCC Warning is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
15.19 Labeling requirements.
to radio or television reception, which can be determined by
This device complies with part 15 of the FCC Rules.
turning the equipment off and on, the user is encouraged to try
Operation is subject to the following two conditions: (1)
to correct the interference by one or more of the following
This device may not cause harmful interference, and (2) this
measures:
device must accept any interference received, including
interference that may cause undesired operation.
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
15.21 Information to user.
-Connect the equipment into an outlet on a circuit different
Any Changes or modifications not expressly approved by
from that to which the receiver is connected.
the party responsible for compliance could void the user's
-Consult the dealer or an experienced radio/TV technician for
authority to operate the equipment.
help.
15.105 Information to the user.
Note: This equipment has been tested and found to comply FCC RF Radiation Exposure Statement:
with the limits for a Class B digital device, pursuant to part 1.This Transmitter must not be co-located or operating in
15 of the FCC Rules. These limits are designed to provide conjunction with any other antenna or transmitter.
reasonable protection against harmful interference in a 2.This equipment complies with RF radiation exposure limits set
residential installation. This equipment generates uses and forth for an uncontrolled environment.
can radiate radio frequency energy and, if not installed and This equipment should be installed and operated with
used in accordance with the instructions, may cause minimum distance 20cm between the radiator and your body.
harmful interference to radio communications. However,
there