Scribd
Upload
23 views4 pages

Projects

The document outlines various group projects related to robotics and automation, including a smart home automation system, line follower robot, radar simulation, remote-controlled car, Mars Rover, IoT PowerSwitch, smart parking system, voice-controlled home automation, security application, and a hand-following robot. Each project includes a list of essential components required for its implementation. The projects are categorized by groups, indicating collaboration among team members.

Uploaded by

ankur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
23 views4 pages

Projects

The document outlines various group projects related to robotics and automation, including a smart home automation system, line follower robot, radar simulation, remote-controlled car, Mars Rover, IoT PowerSwitch, smart parking system, voice-controlled home automation, security application, and a hand-following robot. Each project includes a list of essential components required for its implementation. The projects are categorized by groups, indicating collaboration among team members.

Uploaded by

ankur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

\1.

Home automation
GROUP F

Project: A smart home automation system.​


Components:

●​ ESP module (e.g., ESP8266 or ESP32) – 1​

●​ Jumper cables – As needed for connections​

●​ LEDs – 2​

●​ Motors – 1 BC Motor
●​ 1 Motor Driver
●​ 9 V Battery
●​ Long breadboard

Group F

2. Line Follower Robot

Project: A robot that follows a predefined path using sensors and automated navigation.​
Components:

●​ Arduino board
●​ Motor driver – 1
●​ IR sensors (for line detection) – 2​

3. Radar Simulation ,group a

Project: A radar simulation project for detecting and analyzing object


movements.​
Components:
●​ Arduino board – 1​

●​ Servo motor (to rotate the sensor) – 1​

●​ Ultrasonic sensor (for distance measurement) – 1​


4. JoyRide RC group D
Note- Only Choose if your team bluetooth car worked perfectly for 2 people atleast !

Project: A remote-controlled car operated via a joystick for hands-on control experience.​
Components:

●​ Arduino dip versions boards – 2 (one for the car and one for the controller) ​

●​ Bluetooth modules – 2 (for wireless communication between the car and the
controller)​

●​ Joystick module – 1​
Group D

5. MarsRover​
group b( Advanced version of obstacle avoidance car where we add a
servo motor on ultrasonic sensor )

Project: A Mars Rover prototype for autonomous navigation and exploration.​


Components: (Add or modify based on design details; a suggested list below)

●​ Arduino Board -1 ​

●​ Servo Motors - 1
●​ Motor driver – 1 (or one per motor if needed)​

●​ Ultrasonic -1
●​ Chassis & wheels – 1 set​

●​ Battery pack – 1​
group b

6. IoT PowerSwitch​
Note- Here you would need to purchase a bulb and a holder for
connecting it to a power outlet and must have a relay module ! J

Project: An IoT-based system for switching heavy-duty appliances remotely.​


Components:
●​ Relay module – 1 (choose a multi-channel relay if controlling several appliances)​

●​ Bulb – 1 (or more if demonstrating switching of multiple loads)


●​ Holder for bulb​
group -I. — sivakumar
●​

7. ParkEase Assist GROUP C

Project: A smart parking system that provides assistance using LEDs and buzzers.​
Components:

●​ LEDs – Multiple (for example, a set of 8–10 or more, depending on the design for
visual parking indicators)​

●​ Buzzer – 1 (for audible alerts)​

●​ Ultrasonic sensor (e.g., sensors for detecting distance) can be added based on your
design​

8. Voice House Automation Group E

Project: A smart home automation system with voice-controlled devices for convenience.​
Components: (Basic list; add more based on specific features)

●​ ESP ​

●​ Led light

GROUP E

9. CountGuard IR group g

Project: A security assistance application that tracks and displays the number of people
entering a space.​
Components:

●​ Arduino board – 1​

●​ IR Break-Beam Sensors – 1 (These sensors consist of an infrared emitter and a


receiver. When the beam is interrupted, the system can count the entry or exit of a
person.)​

●​ 1602 Display module (e.g., LCD or LED display) – 1 (to show the count)​

●​ Optional indicators (LEDs, buzzers) – As needed for visual or audible alerts

10. Hand following robot group k

A robot that follows the hand

11. Voice Controlled car group j

You might also like