Scribd
Upload
14 views2 pages

Ecpc 304

The document outlines the curriculum for the B.Tech Programme in Electronics and Communication Engineering, specifically focusing on the Digital Communication Systems course applicable from the 2019 batch. It details course outcomes, including understanding transmitter and receiver design, analyzing system performance, and evaluating error performance in digital communication systems. Additionally, it provides a comprehensive course content structure along with recommended textbooks for further study.

Uploaded by

neozvbambah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
14 views2 pages

Ecpc 304

The document outlines the curriculum for the B.Tech Programme in Electronics and Communication Engineering, specifically focusing on the Digital Communication Systems course applicable from the 2019 batch. It details course outcomes, including understanding transmitter and receiver design, analyzing system performance, and evaluating error performance in digital communication systems. Additionally, it provides a comprehensive course content structure along with recommended textbooks for further study.

Uploaded by

neozvbambah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Curriculum of B.

Tech Programme in Electronics and Communication Engineering to be


applicable from 2019 batch onwards

ECPC-304 Digital Communication Systems [3 1 0 4]

PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO1 PO1 PO1
0 1 2

CO1 ● ● ● ●

CO2 ● ● ●

CO3 ● ● ●

CO4 ● ●

Course Outcomes
CO1: Understand the key components of transmitter and receiver design of digital communication
system
CO2: Analyze the performance of baseband and passband digital communication systems in terms
of error rate and spectral efficiency
CO3: Evaluate the error performance of digital communication systems in presence of noise and
other interferences
CO4: Evaluate the access multiplexing techniques and their influence on system performance.

Course Content
Introduction: Block Diagram of Digital Communication System, Advantages of Digital
communication system over Analog communication systems, Sampling theorem, Signal
reconstruction in time domain, Practical and Flat Top Sampling, Sampling of Band-pass Signal,
Aliasing Problem, Uniform and Non-uniform quantization. Signal to Quantization ratio of Quantized
Signal. (7)
Baseband Transmission: Line Coding & its properties, various types of PCM waveforms. Attributes
of PCM waveforms, M-ary Pulse Modulation waveforms, Differential pulse code modulation,
Multiplexing PCM signals, Delta modulation, Idling noise and slope overload, Adaptive delta
modulation, Adaptive DPCM, Comparison of PCM and DM. (8)
Baseband Detection: Error performance degradation in communication systems, Eb/No parameter,
Maximum likelihood receiver structure, Inter-Symbol Interference (ISI), Pulse Shaping to reduce ISI,
Nyquist criterion for zero ISI &RaisedCosine spectrum, Correlation detector decision threshold and
error probability for binary unipolar (on-off) signalling. (9)
Band-pass modulation and demodulation: Types of digital modulation, Wave forms for Amplitude,
Frequency and Phase Shift Keying, Method of generation and detection of coherent & non-coherent
binary ASK, FSK & PSK, Differential phase shift keying, Quadrature modulation techniques, M-ary
FSK, Minimum Shift Keying (MSK), Probability of error and comparison of various digital
modulation techniques. (9)
Probability of error calculations:A base band signal receiver, Probability of error, The Optimum
filter, Matched Filter, Probability of error in Matched filter, Coherent reception, Coherent reception of
ASK, PSK and FSK, Non-Coherent reception of ASK, FSK, PSK and QPSK, Calculation of bit error
probability of BPSK and BFSK, Error probability for QPSK. (6)
Multiple Access Techniques: Time division multiplexing, Frequency division multiplexing, code
division multiplexing, Introduction to upcoming techniques of transmission (1)

Approved by Board of Studies 9th meeting (February 10, 2023) Department of ECE
Page 66
Curriculum of B.Tech Programme in Electronics and Communication Engineering to be
applicable from 2019 batch onwards

Recommended Books
1. Simon Haykin, “Communication Systems”, Wiley publication, 4th Edition (2004).
2. Bernard Sklar “Digital Communication-Fundamentals and Applications”, Pearson Education
India, 2nd Edition (2009)
3. Miller Gary M, “Modern Electronic Communication”, Prentice-Hall, 6th Edition, (1999)
4. John Proakis “Digital Communications”, Tata Mc Graw Hill, 5th Edition (2007).
1. Wayne Tomsi, “Electronic Communication Systems, Fundamentals Through Advanced”,
Pearson Education, 4th Edition, (2001).

You might also like