Scribd
Upload
16 views9 pages

Seminal Papers - Power Engineering

This document compiles seminal papers in the field of Power Engineering, organized by various subtopics such as induction motor drives, DFIG, permanent magnet synchronous motors, switched reluctance motors, and BLDC motors. The compilation was coordinated by Narsa Reddy Tummuru and last modified in April 2021, incorporating contributions from faculty members. It includes a comprehensive list of influential research papers and their respective authors, focusing on key advancements and methodologies in power engineering.

Uploaded by

vtvbjp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
16 views9 pages

Seminal Papers - Power Engineering

This document compiles seminal papers in the field of Power Engineering, organized by various subtopics such as induction motor drives, DFIG, permanent magnet synchronous motors, switched reluctance motors, and BLDC motors. The compilation was coordinated by Narsa Reddy Tummuru and last modified in April 2021, incorporating contributions from faculty members. It includes a comprehensive list of influential research papers and their respective authors, focusing on key advancements and methodologies in power engineering.

Uploaded by

vtvbjp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Seminal Papers in the Area

Power Engineering
Contents

This sheet: Method used for Compilation


Sheet 2: List of papers

Coordinator: Narsa Reddy Tummuru


Last modified: Apr 2021

Method used for Compilation


Compiled using inputs from faculty members in this area
Seminal Papers in the Are

P. Kundur, J. Paserba, V. Ajjarapu, G. Andersson, A. Bose, C. Canizares, N. Hatziargyriou, D. Hill, A. Stankovic, C.


G. Phadke, J. S. Thorp, and M. Adamiak, “A new measurement technique for tracking voltage phasors, local system
M. S. Sachdev and M. M. Giray, “A least square technique for determining power system frequency,” IEEE Trans. P
F. Schweppe and J. Wildes, “Power system static-state estimation, Part I: Exact Model,” IEEE Trans. on Power App
F. Schweppe and J. Wildes, “Power system static-state estimation, Part II: Approximate Model,” IEEE Trans. on Po
F. Schweppe and J. Wildes, “Power system static-state estimation, Part III: Implementation,” IEEE Trans. on Power
S. Horowitz and A. G. Phadke, “Third zone revisited,” IEEE Trans. Power Del., vol. 21, no. 1, pp. 23–29, Jan. 2006.
S. H. Horowitz, A. G. Phadke and J. S. Thorp. “Adaptive transmission system relaying,” IEEE Transactions on Pow
Y. Q. Xia, K. K. Li and A. K. David, “Adaptive relay setting for standalone digital distance protection,” IEEE Trans. P
M. G. Adamiak, A. P. Apostolov, M. M. Begovic, C. F. Henville, K. E. Martin, G. L. Michel, A. G. Phadke, and J. S. T
IEEE Power Syst. Relay Committee Working Group D6, “Power swing and out-of-step considerations on transmissi
V. Madani, D. Novosel, S. Horowitz, M. Adamiak, J. Amantegui, D. Karlsson, S. Imai, and A. Apostolov, “IEEE PSR
D. Maksimovic, R. Zane, and R. W. Erickson, “Impact of digital control in power electronics,” in Proc. 16th Int. Symp
J. Chen, A. Prodic, R. W. Erickson, and D. Maksimovic, “Predictive digital current programmed control,” IEEE Trans
Chattopadhyay and S. Das, “A digital current-mode control technique for DC-DC converters,” IEEE Trans. Power E
O. Trescases, Z. Lukic, W. T. Ng, and A. Prodic, “A low-power mixed-signal current-mode DC-DC converter using a
A. V. Peterchev and S. R. Sanders, “Quantization resolution and limit cycling in digitally controlled PWM converters
P. Jain and S. Banerjee, “Border-collision bifurcations in one-dimensional discontinuous maps,” Int. J. Bifur. Chaos,
R. B. Ridley, “A new, continuous-time model for current-mode control,” IEEE Trans. Power Electron., vol. 6, no. 2, p
J. Mahdavi, A. Emaadi, M. D. Bellar and M. Ehsani, "Analysis of power electronic converters using the generalized
Wennan Guo and P. K. Jain, "A low frequency AC to high frequency AC inverter with build-in power factor correctio
M. S. Agamy and P. K. Jain, "A Three-Level Resonant Single-Stage Power Factor Correction Converter: Analysis, D
V. Vorperian, "Quasi-square-wave converters: topologies and analysis," in IEEE Transactions on Power Electronics
V. Vorperian, R. Tymerski and F. C. Y. Lee, "Equivalent circuit models for resonant and PWM switches," in IEEE Tr
T. Kawabata and S. Higashino, "Parallel operation of voltage source inverters," in IEEE Transactions on Industry Ap
J. D. Greene and C. A. Gross, "Nonlinear modeling of transformers," in IEEE Transactions on Industry Applications
S. D. Johnson and R. W. Erickson, "Steady-state analysis and design of the parallel resonant converter," in IEEE T
T. Kawabata, T. Miyashita and Y. Yamamoto, "Dead beat control of three phase PWM inverter," in IEEE Transactio
S. N. Manias and G. Kostakis, "Modular DC-DC convertor for high-output voltage applications," in IEE Proceedings
V. A. Caliskan, O. C. Verghese and A. M. Stankovic, "Multifrequency averaging of DC/DC converters," in IEEE Tran
T. Ericsen and A. Tucker, "Power Electronics Building Blocks and potential power modulator applications," Confere
T. Ericsen, "Power Electronic Building Blocks-a systematic approach to power electronics," 2000 Power Engineerin
H. Matsuo, T. Shigemizu, F. Kurokawa and N. Watanabe, "Characteristics of the multiple-input DC-DC converter," P
J. M. Carrasco et al., "Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey,"
H. K. Krishnamurthy and R. Ayyanar, "Building Block Converter Module for Universal (AC-DC, DC-AC, DC-DC) Full
Y. Li, X. Ruan, D. Yang, F. Liu and C. K. Tse, "Synthesis of Multiple-Input DC/DC Converters," in IEEE Transaction
R. G. Hoft and W. Mcmurray, "Power converters," 1979 IEEE Power Electronics Specialists Conference, San Diego
A. Kwasinski, "Quantitative Evaluation of DC Microgrids Availability: Effects of System Architecture and Converter T
H. Qin and J. W. Kimball, "Generalized Average Modeling of Dual Active Bridge DC–DC Converter," in IEEE Transa
Simmi Mangat, Mei Qiu and P. Jain, "A modified asymmetrical pulse-width-Modulated resonant DC/DC converter to
M. Daniele, P. K. Jain and G. Joos, "A single-stage power-factor-corrected AC/DC converter," in IEEE Transactions
M. Jain, M. Daniele and P. K. Jain, "A bidirectional DC-DC converter topology for low power application," in IEEE Tr
Youhao Xi and P. K. Jain, "A forward converter topology with independently and precisely regulated multiple output
Mei Qiu, P. K. Jain and Haibo Zhang, "An APWM resonant inverter topology for high frequency AC power distributio

Induction Motor Drive:

Takahashi and T. Noguchi, "Take a look back upon the past decade of direct torque control [of induction motors]," P
R. Gabriel, W. Leonhard and C. J. Nordby, "Field-Oriented Control of a Standard AC Motor Using Microprocessors,
I. Takahashi and T. Noguchi, "A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor,"
I. Takahashi and Y. Ohmori, "High-performance direct torque control of an induction motor," in IEEE Transactions o
R. D. Lorenz, "A simplified approach to continuous on-line tuning of field-oriented induction machine drives," in IEEE
J. Holtz and T. Thimm, "Identification of the machine parameters in a vector-controlled induction motor drive," in IEE
R. Bojoi, M. Lazzari, F. Profumo and A. Tenconi, "Digital field-oriented control for dual three-phase induction motor
G. K. Singh, K. Nam and S. K. Lim, "A simple indirect field-oriented control scheme for multiphase induction machin
M. P. Kazmierkowski and A. B. Kasprowicz, "Improved direct torque and flux vector control of PWM inverter-fed ind
Sang-Hoon Kim and Seung-Ki Sul, "Voltage control strategy for maximum torque operation of an induction machine
O. Wasynczuk et al., "A maximum torque per ampere control strategy for induction motor drives," in IEEE Transacti

DFIG:

R. Cardenas, R. Pena, J. Proboste, G. Asher and J. Clare, "MRAS observer for sensorless control of standalone do
H. Akagi and H. Sato, "Control and performance of a doubly-fed induction machine intended for a flywheel energy s
R. Cardenas, R. Pena, S. Alepuz and G. Asher, "Overview of Control Systems for the Operation of DFIGs in Wind E

Permanent Magnet Synchronous Motor:

B. K. Bose and P. M. Szczesny, "A microcomputer-based control and simulation of an advanced IPM synchronous
J. Qian and M. A. Rahman, "Analysis of field oriented control for permanent magnet hysteresis synchronous motors

Switched Reluctance Motor

K. M. Rahman, B. Fahimi, G. Suresh, A. V. Rajarathnam and M. Ehsani, "Advantages of switched reluctance motor
I. Husain and M. Ehsani, "Torque ripple minimization in switched reluctance motor drives by PWM current control,"
B. K. Bose, T. J. E. Miller, P. M. Szczesny and W. H. Bicknell, "Microcomputer Control of Switched Reluctance Mot
Z. Yang, F. Shang, I. P. Brown and M. Krishnamurthy, "Comparative Study of Interior Permanent Magnet, Induction

BLDC Motor
Yong Liu, Z. Q. Zhu and D. Howe, "Direct torque control of brushless DC drives with reduced torque ripple," in IEEE
P. Damodharan and K. Vasudevan, "Sensorless Brushless DC Motor Drive Based on the Zero-Crossing Detection
Tae-Hyung Kim and M. Ehsani, "Sensorless control of the BLDC motors from near-zero to high speeds," in IEEE Tr
X. Nian, F. Peng and H. Zhang, "Regenerative Braking System of Electric Vehicle Driven by Brushless DC Motor," i
tions, “Definition and classification of power system stability,” IEEE Trans. Power Syst., vol. 19, no. 3 , pp. 1387–1401, Aug. 20
25–1038, 1983

o. 2, pp. 601–609, Apr. 2006.

ans. Power Del., vol. 25, no. 4, pp. 2143–2155, Oct. 2010.

6, pp. 700–704.

heory and Applications, vol. 44, no. 8, pp. 767-770, Aug. 1997, doi: 10.1109/81.611275.
ch 2004, doi: 10.1109/TPEL.2003.823195.
95-2107, June 2009, doi: 10.1109/TIE.2009.2014744.

, Rancho Mirage, CA, USA, 1998, pp. 12-15, doi: 10.1109/MODSYM.1998.741179.


0.1109/PESS.2000.867553.
3, pp. 115-120, doi: 10.1109/PESC.1993.472079.
1109/TIE.2006.878356.
Orlando, FL, 2007, pp. 483-489, doi: 10.1109/PESC.2007.4342035.

March 2011, doi: 10.1109/TPEL.2010.2102774.


0.1109/TPEL.2003.820602.

09/TPEL.2003.809348.
oi: 10.1109/TPEL.2003.820584.

Instrumentation (Cat. No.97CH36066), New Orleans, LA, USA, 1997, pp. 546-551 vol.2, doi: 10.1109/IECON.1997.671792.
0.1109/TIA.1980.4503770.
1109/TIA.1986.4504799.

109/28.108462.
3, doi: 10.1109/TIA.2003.811790.
0.1109/TIE.2005.851593.
ug. 1995, doi: 10.1109/41.402472.
12-518, Aug. 1997, doi: 10.1109/41.605628.

0-718, Dec. 2005, doi: 10.1109/TEC.2005.847965.


2, doi: 10.1109/63.988676.
July 2013, doi: 10.1109/TIE.2013.2243372.

cs, vol. 35, no. 4, pp. 547-559, Nov. 1988, doi: 10.1109/41.9178.
oi: 10.1109/28.259727.

ations, vol. 36, no. 1, pp. 111-121, Jan.-Feb. 2000, doi: 10.1109/28.821805.

0.1109/TIA.1986.4504782.
Transportation Electrification, vol. 1, no. 3, pp. 245-254, Oct. 2015, doi: 10.1109/TTE.2015.2470092.
9/TIA.2005.844853.
nergy Conversion, vol. 25, no. 3, pp. 661-668, Sept. 2010, doi: 10.1109/TEC.2010.2041781.
04.836625.
109/TIE.2014.2300059.
3 , pp. 1387–1401, Aug. 2004
09/IECON.1997.671792.

You might also like