Part 2.

SEGMENT 1: Exam Set 2

2.4 Practice Exam Set 2

Exam Set 2 [Segment 1]

Certified SolidWorks Professional CSWP Segment 1 Test

 Segment 1 Parts
Create sketches
Use linked values and equations
Create solid model
Measure the mass of the part
Modify the features

 Test duration: 90 min

 Total points: 155 points
 Total Questions: 6
 Pass score: 85

Start Examination>

89 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Question 1 of 6 EXAM SET 2

This test is made up of a series of problems broken into sets of questions. Each problem set
of questions is preceded by a description that outlines the problems to be solved for that set

- Your exam is 6 questions

- You are allowed to answer the questions in any order you prefer
- Use the Summary section to see the list of all questions you have or have not answered
- Once you click end test, you will not be able to return to your questions
- You will have 90 minutes to complete this examination
- Minimum passing score is 85 out of 115

Press Start Examination button to continue.

Start
Question 1.
This text describes the problem that must be solved in this problem set
You will be creating a part using the drawings and parameters specified in the following
questions. Later you will modify your part using design changes given to you.
You will be asked to do the followings.

• Create initial sketches and parameters

• Create and use linked dimensional values and equations
• Create your solid model using various features
• Measure the mass of your finished part
• Modify existing parameters
• Modify the geometry of the base part to create a more advanced part

HINT #1
The dimensions that are to be linked or updated and are variable will be labelled with letters.
Any dimensions that are simple value changes from one stage to another will be circled in
the images.

HINT #2
To save the most time, make use of linked dimensional values and equations

Please select continue to the next question.

Continue

90 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Question 2 of 6 EXAM SET 2

For 25 points

Initial part creation

Build this part in SolidWorks

Unit system: MMGS (millimeter, gram, sec)

Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density: 0.0027g/mm^3

-All holes through all unless shown otherwise.

-Use the following parameters and equations which correspond to the dimensions labelled in
the images
A=135mm
B=58mm
C=180mm
D=26mm
Y=1.5*B+10mm

-Measure the mass of the part.

(Information is provided in next page)

What is the mass of the part (grams)?

 1415.89  1455.36  1426.14  1414.62

Next Question >

91 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Reference Image for Q2 of Exam Set 2 >>

92 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Question 3 of 6 EXAM SET 2

For 20 points

Update parameters of the initial part

Build this part in SolidWorks (Same part after each question in a different file in case it must
be reviewed)

Unit system: MMGS (millimeter, gram, sec)

Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy aluminum
Density: 0.0027g/mm^3

- All holes through all unless shown otherwise.

- Use the following parameters and equations which correspond to the dimensions labelled
in the images
A=143mm
B=58mm
C=190mm
D=26mm
Y=1.5*B+10mm

- Measure the mass of the part

What is the mass of the resultant part (grams)?

Enter Value: [ ]
(Use . as decimal point, 2 decimal places)

Next Question >

93 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Question 4 of 6 EXAM SET 2

For 25 points

Modify and add features

Build this part in SolidWorks (Same part after each question in a different file in case it must
be reviewed)

Unit system: MMGS (millimeter, gram, sec)

Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density: 0.0027g/mm^3

-All holes through all unless shown otherwise.

-This part is to be modified using the following instructions and parameters. The changes are
concentrated in area AA, BB, and CC shown in the image.
-Use the following parameters and equations which correspond to the dimensions labelled in
the images
*Note: the changes in equation for variable Y
A=148mm
B=64mm
C=176mm
D=26mm
E=Hole wizard standard: ISO
Type: Hex socket CTSK Head ISO 10642
Size: M8
Fit: Normal, through all
Y=1.5*B+20mm
Z=2*D

-Measure the mass of the part.

What is the mass of the part (grams)?

 1491.30  1455.25  1488.24  1470.87

Next Question >

94 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Reference Image for Q4 of Exam Set 2 >>

95 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Question 5 of 6 EXAM SET 2

For 25 points

Modify and add features

Build this part in SolidWorks (Same part after each question in a different file in case it must
be reviewed)

Unit system: MMGS (millimeter, gram, sec)

Decimal places: 2
Part Origin: Arbitrary
Material: 1060 Alloy Aluminum
Density: 0.0027g/mm^3

-All holes through all unless shown otherwise.

-This part is to be modified using the following instructions and parameters. The changes are
concentrated in area AA and BB shown in the image.
-Use the following parameters and equations which correspond to the dimensions labelled in
the images
*Note: the changes in equation for variable Y
A=140mm
B=55mm
C=178mm
D=29mm
Y=1.5*B+20mm
Z=2*D
Measure the mass of the part.

What the mass of the part?

 998.10  908.35  899.08  911.86

Next Question >

96 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Reference Image for Q5 of Exam Set 2 >>

97 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Question 6 of 6 EXAM SET 2

For 20 points

Update the parameters

Build this part in SolidWorks (Same part after each question in a different file in case it must
be reviewed)

Unit system: MMGS (millimeter, gram, sec)

Decimal places: 2
Part Origin: Arbitrary
Material: Cast Alloy Steel
Density: 0.0027g/mm^3

-All holes through all unless shown otherwise.

-This part is to be modified using the following instructions and parameters. The changes are
concentrated in area AA and BB shown in the image.
-Use the following parameters and equations which correspond to the dimensions labelled in
the images
*Note: the changes in equation for variable Y
A=142mm
B=52mm
C=178mm
D=27mm
Y=1.5*B+15mm
Z=2*D

Measure the mass of the part.

What is the mass of the part (grams)?

Enter Value: [ ]
(Use . as decimal point, 2 decimal places)

End examination

98 | P a r t 2 - E x a m S e t 2
 Part 2. SEGMENT 1: Exam Set 2

Answer Sheet EXAM SET 1

Summary

Check your score based on the following answers

No Question Points Answer

1 Information 0 -
2 Initial part creation 25  1415.89
3 Update parameters 20 1488.42
4 Modify and add features 25 1491.30
5 Modify and add features 25 911.86
6 Update parameters 20 2386.78
Total 115
*Note: Multiple choice type answer should be exactly matched with provided answers here
While Fill-in-blank type answer should be within ±1% of provided answers.

Review

 What’s your score? _________

 Do you finish segment 1 test within 90 minutes?  Yes  No

 Do you pass segment 1 test?  Yes  No

 What’s your weakest points? (Check a couple of items and try practicing them more)
 Understanding drawings
 Create initial sketches
 Using equations and linked values
 Updating features
 Modifying parameters
 Time management

E N D o f E X A M S E T N o . 2
Answer Sheet
99 | P a r t 2 - E x a m S e t 2