WL0F0007000A8GAAASA00 第 1 頁，共 6 頁
Winstar Display Co., LTD
華凌光電股份有限公司
WEB: https://www.winstar.com.tw E-mail:
[email protected] SPECIFICATION
MODEL NO. : WL0F0007000A8GAAASA00
Summary
7 Inch Smart Display (CAN series) Features
1. +12V power supply input with 5V to 16V dynamic range power input, the power
consumption is around 6 Watt.
2. Self testing after booting function.
3. CAN bus communication interface.
4. Support CANopen negotiation. Default baud rate is 250KB.
5. Built in 16MB flash memory, store the font and Object Dictionary Data.
6. Support capacitive touch panel (CTP).
7. Embedded buzzer controlled by Master Device.
8. HOST can be used on multiple platforms, such as Computer (with USB to CAN
Dongle), MCU, Raspberry Pi (with PiCAN2).
WL0F0007000A8GAAASA00 第 2 頁，共 6 頁
Product information
General information
Item Standard Value Unit
Operating voltage 5~16V Vdc
Communication Interface CAN bus differential ± 3.3 N/A
MCU STM32F746 216MHz N/A
Flash Memory 16 MB
SDRAM Frequency 108 MHz
LCD display size 7.0 inch
Dot Matrix 1024 x RGB x 600(TFT) dot
Module dimension 184.1(W) x 103.8(H) x 22(D) mm
Active area 154.2144 x 85.92 mm
Pixel pitch 0.1506 x 0.1432 mm
Brightness Min:400; Typ:450 cd/m2
LCD type TFT, Normally Black, Transmissive
View Direction 85/85/85/85
Aspect Ratio 16:9
Touch Panel Capacitive Touch Panel
Surface Glare
WL0F0007000A8GAAASA00 第 3 頁，共 6 頁
Contour Drawing
CON3 CON2
PIN SYMBOL PIN SYMBOL PIN SYMBOL
1 +3V3 1 VIN 9 Reserve
POWER JACK 2 SWCLK 2 GND 10 Reserve
3 GND 3 CAN_H 11 Reserve
2 1
4 SWDIO 4 CAN_L 12 GND
(GND) (12V)
5 NRST 5 GND 13 Reserve
6 GND 6 GND 14 NC
7~16 NC 7 NC 15 NC
8 NC 16 GND
170.3±0.5(TFT OD)
2.69±0.5 164.4(TP OD) 22 MAX 184.1±0.5(PCB)
5.74±0.5 155.22(TP VA)
7.55±0.7 178.1
5.72±0.5
6.29 154.21(TFT AA)
1.7±0.5
5.85±0.5 3
6.49
6.9±0.5 (16.54) (43.66)
(3)
Pull Tape
R GB
2-32.25
1 9
SD(Reserve)
CON2
CON3
CTP Zero point(0,0) CON2
CON3
16 16
16 16
103.8±0.5(TFT OD)
85.92(TFT AA)
87.19(TP VA)
2-P2.54*15=38.1
Active Area 7.0"
99.45(TP OD)
102.6±0.5(PCB)
1024 x RGB x 600
96.6
CTP
32- 1.0PTH
1 10 32- 1.8PAD 6
CON1 1
40
1
1 1
1 2.5
2.5
inner pin 2.0±0.1
Component
(5)
Component inner hole 6.4
area area
POWER-JACK
(16.6)
Black printing 1.6(PCB) 4- 3.5PTH
3
4-
0.6±0.5
2.0MAX
R0
4- 6.0PAD
.5
0
Component Area
(Height=12 MAX)
WL0F0007000A8GAAASA00 第 4 頁，共 6 頁
Absolute Maximum Ratings
Item Symbol Min Typ Max Unit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃
Electrical Characteristics
Item Symbol Condition Min Typ Max Unit
Supply Voltage VIN － 5 12 16 V
Supply current I(mA) － － 490 － mA
BOM
Item Description
LCM WF70A8TYAHLNGB#
PCBA SV10007R00AAA00N0100
WL0F0007000A8GAAASA00 第 5 頁，共 6 頁
Interface
CON2 definition:
Pin Symbol Function Remark
1 VIN Power supply V+ Input
2 GND Power supply GND input Input
3 CAN_H CAN bus D+ I/O
4 CAN_L CAN bus D- I/O
5 GND Power supply GND input Input
6 GND Power supply GND input Input
7 NC _ _
8 NC _ _
9 Reserve _ _
10 Reserve UART RX interface(Reserve) Reserve
11 Reserve UART TX interface(Reserve) Reserve
12 GND GND GND
13 Reserve _ _
14 NC _ _
15 NC _ _
16 GND GND GND
CON3 definition:
Pin Symbol Function Remark
1 +3V3 3.3V power for JTAG interface Output
2 SWCLK CLK pin for JTAG interface Input
3 GND GND for JTAG interface Output
4 SWDIO Data pin for JTAG interface I/O
5 NRST Reset pin for JTAG interface Input
6 GND GND Output
7~16 NC _ _
WL0F0007000A8GAAASA00 第 6 頁，共 6 頁
