Scribd
Upload
12 views4 pages

J2534PythonReleaseNotes

The J2534 Python 1B Release Notes detail the product revision DEI9.02B1, released on October 3, 2006, and list various component revisions and known bugs. Key updates include support for multiple baud rates for ISO9141/ISO14230 and several features that are not supported, such as certain SCI protocols and configurations. The document also categorizes issues into software and dependency issues, providing a comprehensive overview of the release's capabilities and limitations.

Uploaded by

Vishwaroop Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views4 pages

J2534PythonReleaseNotes

The J2534 Python 1B Release Notes detail the product revision DEI9.02B1, released on October 3, 2006, and list various component revisions and known bugs. Key updates include support for multiple baud rates for ISO9141/ISO14230 and several features that are not supported, such as certain SCI protocols and configurations. The document also categorizes issues into software and dependency issues, providing a comprehensive overview of the release's capabilities and limitations.

Uploaded by

Vishwaroop Gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

J2534 Python 1B Release Notes

Product Revision : DEI9.02B1


Release Date: 10/3/2006

Component Revisions :

No. Components/Files Comments Revision

1. CuxdP404.dll 9.01
2. DgP40432.dll J2534 Python1B Main DLL DEI9.02B
1
3. MidxP404.dll 9.01
4. Python Firmware 3.40
5. Python Hardware 1B
6. Python1BConfig0404.exe Configuration Utility for Hardware 4.02
Setting and Window Registry
7. Python1B2534SDK.exe Sample Application 4.031
8. J2534 Standard Document 04.04
9. PythonReflash.exe Python 1B Reflash Application 1.041

Changes/Additions :

No. Features Issue Comments Ref. Bug


Code Section in ID
J2534
Document

1. The firmware supports DI Firmware


ISO9141/ISO14230 baud
rate of 57,600, 125,000, and
250,000
2. The DLL supports SI DGP40432.dll
ISO9141/ISO14230 baud
rate of 57,600, 125,000, and
250,000

DLL Known Bugs :


No. Issues/Features Issue Comments Ref. Bug
Code Section in ID
J2534
Document

1. SCP Priority/Type Byte (1st DI Firmware Feature 138


byte of received msg) is Design
always set to 0

Firmware Known Bugs :

No. Issues/Features Issue Comments Ref. Bug


Code Section in ID
J2534
Document

1. When transmitting DI Firmware Issue 1348


J1850VPW message of less
than 4 bytes, it gets treated as
a received message instead
of a transmitted message

Not Supported :

No. Features Issue Comments Ref. Bug


Code Section in ID
J2534
Document

1. SAE J2610 DaimlerChrysler SI Not Implemented 6.5.7 147


SCI
2. “Priority specified by Bit 8” DI The firmware 7.2.1.3 917
in Bit 11 of Flags for does not allow to (Bit 11)
PassThruConnect set the priority.
3. “ Both Std & Ext CAN ID” in DI The firmware has 7.2.1.3 918
Bit 11 of Flags for some restrictions (Bit 11)
PassThruConnect
4. Protocol Ids SI Not Implemented 7.2.1.4 147
Protocol Ids for :
SCI_A_ENGINE
SCI_A_TRANS
SCI_B_ENGINE
SCI_B_TRANS
5. SCI Data Format SI SCI protocol not 8.3.7 147
supported.
6. SCI Data Format Error SI SCI protocol not 8.3.7.1 147
Detection supported
7. RX_BREAK in RxStatus flag DI The firmware 8.4.1 (Bit 920
does not report. 2)
8. Programmable Power Supply DI Firmware does 6.7 148
not support.
9. ISO15765-2 Extended DI Python Library 7.2.1.3 921
Addressing method does not support (Bit 7)
10. GET_CONFIG not supported DI Firmware does 7.3.1 922
for : not support.
T1_MAX, T2_MAX,
T4_MAX, T5_MAX,
ISO15765_STMIN
11. SET_CONFIG not supported DI Firmware does 7.3.2 922
for : not support.
T1_MAX, T2_MAX,
T4_MAX, T5_MAX,
ISO15765_STMIN
12. READ_PROG_VOLTAGE DI Firmware does 7.3.4 149
not support.
13. Python does not support DI Firmware does 6.5.3 228
83333 bps for SCP not support that
data rate on that
protocol
14. Python does not support DI Firmware does 6.5.3 881
41666 bps for Class 2 not support that
data rate on that
protocol
15. Python does not DI Firmware does 8.3.4 883
communicate with messages not support block
longer than 12 bytes long for transfer mode.
J1850VPW
16. Python USB is limited to DI Firmware 144
57,600 baud for serial port supports that baud
setting and Python RS-232 is rate
limited to 28,800 baud for
serial port setting
17. This release has been tested NA 923
on Windows NT 4.0, 95C,
98, 2000, and XP.

Issue Code :
SI – Software Issue (Bugs/Issues in the J2534 software)
DI – Dependency Issue (Bugs/Issues in the external dependencies, e.g. firmware,
hardware, interface library etc.)
NA – Not Applicable

You might also like