Scribd
Upload
6 views1 page

Beam Type (Difflection+Bending Moment)

The document outlines various beam types and their corresponding loading conditions, maximum deflection, and maximum bending moment locations. It includes details for simply supported beams, cantilever beams, fixed beams, propped cantilevers, and overhanging beams under uniform distributed loads (UDL). Formulas for calculating maximum moments and deflections are provided for each beam type.

Uploaded by

Muhammad Muddasir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
6 views1 page

Beam Type (Difflection+Bending Moment)

The document outlines various beam types and their corresponding loading conditions, maximum deflection, and maximum bending moment locations. It includes details for simply supported beams, cantilever beams, fixed beams, propped cantilevers, and overhanging beams under uniform distributed loads (UDL). Formulas for calculating maximum moments and deflections are provided for each beam type.

Uploaded by

Muhammad Muddasir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Beam Type Loading Max Deflection Max Bending Moment

Location Location
Simply Supported Beam UDL over Mid-span Mid-span
entire span
Cantilever Beam UDL over Free end Fixed support
entire span
Fixed Beam (Both Ends UDL over Mid-span At supports (negative
Fixed) entire span moment) and mid-span
(positive moment)
Overhanging Beam (one UDL on full Between support Near support or overhang
side) span and overhang depending on span
Propped Cantilever UDL over Between fixed and Near fixed end
(Fixed + Simple entire span simple support
Support)
Beam max deflection and Bending momements

Beam Type Loading Max Moment Max Deflection (δmax) Location of


(Mmax) Max
Simply UDL over {wL^2}{8} {5wL^4}/{384EI} At mid-span
Supported full span
Beam ww
Cantilever UDL over {wL^2}{2} (at {wL^4}/{8EI} At free end
Beam full span fixed end)
ww
Fixed-Fixed UDL over {wL^2}{12} (at {wL^4}/{384EI} At mid-span
Beam full span supports)
ww
Propped UDL over {wL^2}{9} {wL^4}/{384EI} Between
Cantilever full span (approx., at fixed (approx.) support and
ww end) mid-span
Overhanging UDL on Varies based on Varies – use beam Between
Beam (one side) full span overhang length tables or moment support and
ww diagrams overhang

You might also like