CLOUD COMPUTING & INTERNET OF THINGS

PART-B

Ex.Name: LED BLINK

Ex.No:1

void setup() {

// initialize digital pin LED_BUILTIN as an output.

//pinMode(2, OUTPUT);

// pinMode(3, OUTPUT);

pinMode(4, OUTPUT);

pinMode(5, OUTPUT);

pinMode(6, OUTPUT);

pinMode(7, OUTPUT);

// pinMode(8, OUTPUT);

// pinMode(9, OUTPUT);

// the loop function runs over and over again forever

void loop() {

//digitalWrite(2, HIGH);

//digitalWrite(3, HIGH);

digitalWrite(4, HIGH);

digitalWrite(5, HIGH);
 digitalWrite(6, HIGH);

digitalWrite(7, HIGH);

// digitalWrite(8, HIGH);

// digitalWrite(9, HIGH);// turn the LED on (HIGH is the voltage level)

delay(1000); // wait for a second

// digitalWrite(2, LOW);

// digitalWrite(3, LOW);

digitalWrite(4, LOW);

digitalWrite(5, LOW);

digitalWrite(6, LOW);

digitalWrite(7, LOW);

// digitalWrite(8, LOW);

// digitalWrite(9, LOW);// turn the LED off by making the voltage LOW

delay(2000); // wait for a second

Ex.No:1.1

Ex.Name:LED PATTERN

int t = 40;

int rnd =5;

int pat1t =75;

void setup()

{
 for(int i=3; i<=12; i++) // pin d3 to d11 used

pinMode(i,OUTPUT);

void loop(){

for(int i=0; i<=rnd; i++) {

pat1();}

for(int i=0; i<=rnd; i++){

pat2();}

for(int i=0; i<=rnd; i++) {

pat3();}

for(int i=0; i<=rnd; i++) {

pat4();}

for(int i=0; i<=rnd; i++){

pat5();}

for(int i=0; i<=rnd; i++) {

pat6();}

for(int i=0; i<=rnd; i++) {

pat7();}

for(int i=0; i<=rnd; i++) {

pat8();}

for(int i=0; i<=rnd; i++) {

pat9();

}
void pat1(){

for(int i=3; i<=12; i++) {

digitalWrite(i,HIGH);

delay(pat1t);

digitalWrite(i,LOW);

for(int i=11; i>=4; i--) {

digitalWrite(i,HIGH);

delay(pat1t);

digitalWrite(i,LOW);

void pat2(){

for(int i=3; i<=12; i++) {

digitalWrite(i,HIGH);

digitalWrite(i-1,HIGH);

digitalWrite(i+1,HIGH);

delay(100);

digitalWrite(i,LOW);

digitalWrite(i-1,LOW);

digitalWrite(i+1,LOW);

}
 for(int i=11; i>=4; i--) {

digitalWrite(i,HIGH);

digitalWrite(i-1,HIGH);

digitalWrite(i+1,HIGH);

delay(100);

digitalWrite(i,LOW);

digitalWrite(i-1,LOW);

digitalWrite(i+1,LOW);

void pat3(){

for(int i=3; i<=12; i=i+2) {

digitalWrite(i,HIGH);

delay(100);

digitalWrite(i,LOW);

for(int i=12; i>=3; i=i-2) {

digitalWrite(i,HIGH);

delay(100);

digitalWrite(i,LOW);

}
}

void pat4(){

for(int i=3; i<=12; i++) {

digitalWrite(i,HIGH);

delay(100);

for(int i=12; i>=2; i--) {

digitalWrite(i,HIGH);

delay(100);

digitalWrite(i,LOW);

void pat5(){

for(int i=3; i<=12; i++) {

digitalWrite(i,HIGH);

delay(100);

for(int i=3; i<=12; i++) {

digitalWrite(i,LOW);

delay(100);

void pat6(){
 for(int i=3; i<=8; i++) {

digitalWrite(i,HIGH);

for(int i=8; i<=12; i++) {

digitalWrite(i,LOW);

delay(200);

for(int i=3; i<=8; i++) {

digitalWrite(i,LOW);

for(int i=8; i<=12; i++) {

digitalWrite(i,HIGH);

delay(200);

void pat7(){

for(int i=3; i<=12; i=i+2) {

digitalWrite(i,HIGH);

for(int i=4; i<=12; i=i+2) {

digitalWrite(i,LOW);

delay(200);
 for(int i=3; i<=12; i=i+2) {

digitalWrite(i,LOW);

for(int i=4; i<=12; i=i+2) {

digitalWrite(i,HIGH);

delay(200);

void pat8(){

digitalWrite(7,HIGH);

digitalWrite(8,HIGH);

delay(t);

digitalWrite(7,LOW);

digitalWrite(8,LOW);

delay(t);

digitalWrite(6,HIGH);

digitalWrite(9,HIGH);

delay(t);

digitalWrite(6,LOW);

digitalWrite(9,LOW);

delay(t);

digitalWrite(5,HIGH);

digitalWrite(10,HIGH);
delay(t);

digitalWrite(5,LOW);

digitalWrite(10,LOW);

delay(t);

digitalWrite(4,HIGH);

digitalWrite(11,HIGH);

delay(t);

digitalWrite(4,LOW);

digitalWrite(11,LOW);

delay(t);

digitalWrite(3,HIGH);

digitalWrite(12,HIGH);

delay(t);

digitalWrite(3,LOW);

digitalWrite(12,LOW);

delay(t);

digitalWrite(4,HIGH);

digitalWrite(11,HIGH);

delay(t);

digitalWrite(4,LOW);

digitalWrite(11,LOW);

delay(t);

digitalWrite(5,HIGH);
 digitalWrite(10,HIGH);

delay(t);

digitalWrite(5,LOW);

digitalWrite(10,LOW);

delay(t);

digitalWrite(6,HIGH);

digitalWrite(9,HIGH);

delay(t);

digitalWrite(6,LOW);

digitalWrite(9,LOW);

delay(t);

void pat9(){

for(int i=3; i<=12; i++) {

digitalWrite(i,HIGH);

for(int i=3; i<=12; i++) {

digitalWrite(i,LOW);

delay(100);

digitalWrite(i,HIGH);

for(int i=11; i>=4; i--) {

 digitalWrite(i,LOW);

delay(100);

digitalWrite(i,HIGH);

Ex.Name: LED PATTERN WITH PUSH BUTTON

Ex.No:2

int L1 = 2;

int L2 = 3;

int L3 = 4;

int L4 = 5;

int L5 = 6;

int L6 = 7;

int L7 = 8; //7 LED pin

int buttonPin = 9; //the number of the pushbutton pin

int de=50; // delay time

int p=0; // variable for pattem

int buttonState = 0; // variable for reading the pushbutton status

void setup() {

pinMode(L1, OUTPUT);
 pinMode(L2, OUTPUT);

pinMode(L3, OUTPUT);

pinMode(L4, OUTPUT);

pinMode(L5, OUTPUT);

pinMode(L6, OUTPUT);

pinMode(L7, OUTPUT);

pinMode(buttonPin, INPUT);

void loop()

buttonState = digitalRead(buttonPin);

if (buttonState == LOW)

p++;

delay(2000);

if(p==1)

digitalWrite(L1,1);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);
digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //1

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,1);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //2

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,1);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //3

delay(de);
digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,1);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //4

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,1);

digitalWrite(L6,0);

digitalWrite(L7,0); //5

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);
digitalWrite(L6,1);

digitalWrite(L7,0); //6

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,1); //7

delay(de);

if(p==2)

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,1); //7

delay(de);
digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,1);

digitalWrite(L7,0); //6

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,1);

digitalWrite(L6,0);

digitalWrite(L7,0); //5

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,1);

digitalWrite(L5,0);
digitalWrite(L6,0);

digitalWrite(L7,0); //4

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,1);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //3

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,1);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //2

delay(de);
digitalWrite(L1,1);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //1

delay(de);

if(p==3)

digitalWrite(L1,1);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //1

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,1);

digitalWrite(L3,0);
digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //2

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,1);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //3

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,1);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //4

delay(de);
digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,1);

digitalWrite(L6,0);

digitalWrite(L7,0); //5

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,1);

digitalWrite(L7,0); //6

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);
digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,1); //7

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,1);

digitalWrite(L7,0); //6

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,1);

digitalWrite(L6,0);

digitalWrite(L7,0); //5

delay(de);
digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,1);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //4

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,1);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //3

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,1);

digitalWrite(L3,0);
digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //2

delay(de);

if(p==4)

digitalWrite(L1,1);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,1); //1,7

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,1);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,1);
digitalWrite(L7,0); //2,6

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,1);

digitalWrite(L4,0);

digitalWrite(L5,1);

digitalWrite(L6,0);

digitalWrite(L7,0); //3,5

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,1);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //4

delay(de);

}
 if(p==5)

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,1);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //4

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,1);

digitalWrite(L4,0);

digitalWrite(L5,1);

digitalWrite(L6,0);

digitalWrite(L7,0); //3,5

delay(de);

digitalWrite(L1,0);

digitalWrite(L2,1);
digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,1);

digitalWrite(L7,0); //2,6

delay(de);

digitalWrite(L1,1);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,1); //1,7

delay(de);

if(p==6)

digitalWrite(L1,1);

delay(de);

digitalWrite(L2,1);

delay(de);

digitalWrite(L3,1);
delay(de);

digitalWrite(L4,1);

delay(de);

digitalWrite(L5,1);

delay(de);

digitalWrite(L6,1);

delay(de);

digitalWrite(L7,1); //1,7

delay(de);

digitalWrite(L7,0); //1,7

delay(de);

digitalWrite(L6,0);

delay(de);

digitalWrite(L5,0);

delay(de);

digitalWrite(L4,0);

delay(de);

digitalWrite(L3,0);

delay(de);

digitalWrite(L2,0);

delay(de);

digitalWrite(L1,0);

delay(de);
}

if(p==7)

digitalWrite(L1,0);

digitalWrite(L2,0);

digitalWrite(L3,0);

digitalWrite(L4,0);

digitalWrite(L5,0);

digitalWrite(L6,0);

digitalWrite(L7,0); //1,7

p=0;

Ex.No:3

Ex.Name:DISPLAYING HELLO WORD

#include <LiquidCrystal.h>

// initialize the library by associating any needed LCD interface pin

// with the arduino pin number it is connected to

const int rs = 12, en = 11, d4 = 4, d5 = 5, d6 = 6, d7 = 7;

LiquidCrystal lcd(rs, en, d4, d5, d6, d7);

void setup() {

// set up the LCD's number of columns and rows:

 lcd.begin(16, 2);

// Print a message to the LCD.

lcd.print("HELLO WORLD");

void loop() {

// set the cursor to column 0, line 1

// (note: line 1 is the second row, since counting begins with 0):

// lcd.setCursor(0, 1);

// print the number of seconds since reset:

// lcd.print(millis() / 1000);

Ex.No:4

Ex.Name:TO IMPLEMENT SERVO MOTOR CONTROL

#include <Servo.h>

int servoPin = 9;

Servo servo;

int angle = 0; // servo position in degrees

void setup() {

servo.attach(servoPin);

}
void loop() {

// scan from 0 to 180 degrees

for(angle = 0; angle < 180; angle++)

servo.write(angle);

delay(15);

// now scan back from 180 to 0 degrees

for(angle = 180; angle > 0; angle--)

servo.write(angle);

delay(1);

Ex.No:5

Ex.Name:IMPLEMENTATION OF LM35 TEMPERATURE SENSOR

#include<LiquidCrystal.h>

LiquidCrystal lcd(12, 11, 4, 5, 6, 7);

const int sensor=A0; // Assigning analog pin A1 to variable 'sensor'

float tempc; //variable to store temperature in degree Celsius

float tempf; //variable to store temperature in Fahreinheit

float vout; //temporary variable to hold sensor reading

float sensorValue;

void setup()

pinMode(sensor,INPUT); // Configuring pin A1 as input

Serial.begin(9600);

lcd.begin(16,2);

delay(500);

void loop()

sensorValue=analogRead(sensor);

vout=(sensorValue*5000)/1024;

tempf=vout /10; // Storing value in Degree Celsius

tempc=(tempf - 32.0)*(5.0/9.0); // Converting to Fahrenheit

lcd.setCursor(0,0);

lcd.print("in DegreeC= ");

lcd.print(tempc);

lcd.setCursor(0,1);

lcd.print("in Fahrenheit=");

lcd.print(tempf);

delay(1000); //Delay of 1 second for ease of viewing in serial monitor

}
Ex.No:5.1

Ex.Name:ULTRASONIC DISTANCE MEASUREMENT

#include <LiquidCrystal.h> // includes the LiquidCrystal Library

LiquidCrystal lcd(12, 11, 4, 5, 6, 7); // Creates an LCD object. Parameters: (rs,

enable, d4, d5, d6, d7)

const int trigPin = 3;

const int echoPin = 2;

long duration;

int distanceCm, distanceInch;

void setup() {

lcd.begin(16, 2); // Initializes the interface to the LCD screen, and specifies the
dimensions (width and height) of the display

pinMode(trigPin, OUTPUT);

pinMode(echoPin, INPUT);

void loop() {

digitalWrite(trigPin, LOW);

delayMicroseconds(2);

digitalWrite(trigPin, HIGH);

delayMicroseconds(10);

digitalWrite(trigPin, LOW);

duration = pulseIn(echoPin, HIGH);

distanceCm = duration * 0.034 / 2;

 distanceInch = duration * 0.0133 / 2;

lcd.setCursor(0, 0); // Sets the location at which subsequent text written to the
LCD will be displayed

lcd.print("Distance: "); // Prints string "Distance" on the LCD

lcd.print(distanceCm); // Prints the distance value from the sensor

lcd.print(" cm");

delay(10);

lcd.setCursor(0, 1);

lcd.print("Distance: ");

lcd.print(distanceInch);

lcd.print(" inch");

delay(10);

Ex.No:6

Ex.Name:IMPLEMENTATION OF IR WITH ANALOG INPUT

const int ProxSensor=A0;

int inputVal = 0;

void setup()

pinMode(5, OUTPUT); // Pin 1 has an LED connected on most Arduino

boards:

pinMode(ProxSensor,INPUT); //Pin A0 is connected to the output of proximity

sensor
 Serial.begin(9600);

void loop()

if(digitalRead(ProxSensor)==HIGH) //Check the sensor output

digitalWrite(5, HIGH); // set the LED on

else

digitalWrite(5, LOW); // set the LED off

inputVal = analogRead(ProxSensor);

Serial.println(inputVal);

delay(1000); // wait for a second

Ex.No:7

Ex.Name:TEMPERATURE SENSOR MONITORING WITH RASPBERRY

PI

#include "ThingSpeak.h"

#include <ESP8266WiFi.h>

const int LM35 = A0;

//----------- Enter you Wi-Fi Details---------//

char ssid[] = "Rajeev"; //SSID

char pass[] = "123456789"; // Password

//-------------------------------------------//

WiFiClient client;

unsigned long myChannelNumber = 1993135; // Channel ID here

const int FieldNumber = 1;

const char * myWriteAPIKey = "QX0XYTX3XE9DA9A9"; // Your Write API

Key here

void setup()

Serial.begin(115200);

WiFi.mode(WIFI_STA);

ThingSpeak.begin(client);

void loop()

if (WiFi.status() != WL_CONNECTED)

Serial.print("Attempting to connect to SSID: ");

 Serial.println(ssid);

while (WiFi.status() != WL_CONNECTED)

WiFi.begin(ssid, pass);

Serial.print(".");

delay(5000);

Serial.println("\nConnected.");

int ADC;

float temp;

ADC = analogRead(LM35); /* Read Temperature */

temp = (ADC * 3); /* Convert adc value to equivalent voltage */

temp = (temp / 10); /* LM35 gives output of 10mv/°C */

Serial.print("Temperature = ");

Serial.print(temp);

Serial.println(" *C");

delay(1000);

ThingSpeak.writeField(myChannelNumber, FieldNumber, temp,

myWriteAPIKey);

delay(5000);