Linux Programming B.

Tech IV Year II Sem (KR21)

UNIT-I
Introduction to Linux:

Linux is a Unix-like computer operating system assembled under the model of free
and open source software development and distribution. The defining component
of Linux is the Linux kernel, an operating system kernel first released 5 October
1991 by Linus Torvalds.

Linux was originally developed as a free operating system for Intel x86-based
personal computers. It has since been ported to more computer hardware platforms
than any other operating system. It is a leading operating system on servers and
other big iron systems such as mainframe computers and supercomputers more
than 90% of today's 500 fastest supercomputers run some variant of Linux,
including the 10 fastest. Linux also runs on embedded systems (devices where the
operating system is typically built into the firmware and highly tailored to the
system) such as mobile phones, tablet computers, network routers, televisions and
video game consoles; the Android system in wide use on mobile devices is built
on the Linux kernel.
A distribution oriented toward desktop use will typically include the X Window
System and an accompanying desktop environment such as GNOME or KDE
Plasma. Some such distributions may include a less resource intensive desktop
such as LXDE or Xfce for use on older or less powerful computers. A distribution
intended to run as a server may omit all graphical environments from the standard
install and instead include other software such as the Apache HTTP Server and an
SSH server such as OpenSSH. Because Linux is freely redistributable, anyone may
create a distribution for any intended use. Applications commonly

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

used with desktop Linux systems include the Mozilla Firefox web browser, the LibreOffice
office application suite, and the GIMP image editor
Basic Features:
Following are some of the important features of Linux Operating System.
 Portable - Portability means software’s can works on different types of hardware’s in
same way. Linux kernel and application programs support their installation on any kind
of hardware platform.
 Open Source - Linux source code is freely available and it is community-based
development project. Multiple Teams works in collaboration to enhance the capability of
Linux operating system and it is continuously evolving.
 Multi-User - Linux is a multiuser system means multiple users can access system
resources like memory/ ram/ application programs at same time.
 Multiprogramming - Linux is a multiprogramming system means multiple applications
can run at same time.

 Hierarchical File System - Linux provides a standard file structure in which system
 files/ user files are arranged.
 Shell - Linux provides a special interpreter program which can be used to execute
commands of the operating system. It can be used to do various types of operations, call
application programs etc.
 Security - Linux provides user security using authentication features like password
protection/ controlled access to specific files/ encryption of data.

Linux Advantages:
1.Low cost: You don’t need to spend time and money to obtain licenses since Linux and much
of its software come with the GNU General Public License. You can start to work immediately
without worrying that your software may stop working anytime because the free trial version
expires. Additionally, there are large repositories from which you can freely download high
quality software for almost any task you can think of.
2.Stability: Linux doesn’t need to be rebooted periodically to maintain performance levels.
It doesn’t freeze up or slow down over time due to memory leaks and such. Continuous up-
times of hundreds of days (up to a year or more) are not uncommon.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

3.Performance: Linux provides persistent high performance on workstations and on networks.

It can handle unusually large numbers of users simultaneously,
and can make old computers sufficiently responsive to be useful again.
4. Network friendliness: Linux was developed by a group of programmers over the Internet
and has therefore strong support for network functionality; client and server systems can be
easily set up on any computer running Linux. It can perform tasks such as network backups
faster and more reliably than alternative systems.
5.Flexibility: Linux can be used for high performance server applications, desktop applications,
and embedded systems. You can save disk space by only installing the components needed for
a particular use. You can restrict the use of specific computers by installing for example only
selected office applications instead of the wholesuite.
6.Compatibility: It runs all common UNIX software packages and can process all common file
formats.
7.Choice: The large number of Linux distributions gives you a choice. Each distribution is
developed and supported by a different organization. You can pick the one you like best; the

core functionalities are the same; most software runs on most distributions.
8.Fast and easy installation: Most Linux distributions come with user-friendly installation
and setup programs. Popular Linux distributions come with tools that make installation of
additional software very user friendly as well.
9. Full use of hard disk: Linux continues work well even when the hard disk is almost full.
10. Multi-tasking: Linux is designed to do many things at the same time; e.g., a large printing
job in the background won’t slow down your other work.
11. Security: Linux is one of the most secure operating systems. “Walls” and flexible file access
permission systems prevent access by unwanted visitors or viruses. Linux users have to option
to select and safely download software, free of charge, from online repositories containing
thousands of high quality packages. No purchase transactions requiring credit card numbers or
other sensitive personal information are necessary.
12. Open Source: If you develop software that requires knowledge or modification of the
operating system code, LINUX’s source code is at your fingertips. Most Linux applications
are Open Source as well.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Difference between UNIX and LINUX:

Features LINUX UNIX

Cost Linux can be freely distributed, Different flavors of Unix have

downloaded freely, distributed different cost structures according
through magazines, Books etc. to vendors
There are priced versions for
Linux also, but they are
normally cheaper than
Windows.

Development Linux is developed by Open Unix systems are divided into

and Source development i.e. through various other flavors, mostly
Distribution sharing and collaboration of developed by AT&T as well as
code and features through forums various commercial vendors and
etc and it is distributed non-profit organizations.

by various vendors.

Manufacturer Linux kernel is developed by Three biggest distributions are

the community. Linus Torvalds Solaris (Oracle), AIX (IBM) & HP-
oversees things. UX Hewlett Packard. And Apple
Makes OSX, an unix based os..

User Everyone. From home users to Unix operating systems were

developers and computer developed mainly for mainframes,
enthusiasts alike. servers and workstations except
OSX, Which is designed for
everyone. The Unix environment
and the client-server program
model were essential elements in
the development of the Internet

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Usage Linux can be installed on a wide The UNIX operating system is used
variety of computer hardware, in internet servers, workstations &
ranging from mobile phones, PCs. Backbone of the majority of
tablet computers and video game finance infrastructure and many
consoles, to mainframes and 24x365 high availability solutions.
supercomputers.

File system Ext2, Ext3, Ext4, Jfs, ReiserFS, jfs, gpfs, hfs, hfs+, ufs, xfs, zfs format
support Xfs, Btrfs, FAT, FAT32, NTFS

Text mode BASH (Bourne Again SHell) is Originally the Bourne Shell. Now
interface the Linux default shell. It can it's compatible with many others
support multiple command including BASH, Korn & C.
interpreters.

What is it? Linux is an example of Open Unix is an operating system that is

Source software development very popular in universities,
and Free Operating System companies, big enterprises etc.
(OS).

GUI Linux typically provides two Initially Unix was a command

GUIs, KDE and Gnome. But based OS, but later a GUI was
there are millions of alternatives created called Common Desktop
such as LXDE, Xfce, Unity, Environment. Most distributions
Mate, twm, ect. now ship with Gnome.

Price Free but support is available for Some free for development use
a price. (Solaris) but support is available for
a price.

Security Linux has had about 60-100 A rough estimate of UNIX viruses is
viruses listed till date. None of between 85 -120 viruses reported till
them actively spreads date.
nowadays.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Threat In case of Linux, threat detection Because of the proprietary nature of

detection and and solution is very fast, as the original Unix, users have to wait
solution Linux is mainly community for a while, to get the proper bug
driven and whenever any Linux fixing patch. But these are not as
user posts any kind of threat, common.
several developers start working
on it from different parts of the
world

Processors Dozens of different kinds. x86/x64, Sparc, Power, Itanium,

PA-RISC, PowerPC and many
others.

Examples Ubuntu, Fedora, Red Hat, OS X, Solaris, All Linux

Debian, Archlinux, Android etc.

Architectures Originally developed for Intel's is available on PA-RISC and

x86 hardware, ports available Itanium machines. Solaris also
for over two dozen CPU types available for x86/x64 based
including ARM systems.OSX is PowerPC(10.0-

10.5)/x86(10.4)/x64(10.5-10.8)

Inception Inspired by MINIX (a Unix-like In 1969, it was developed by a

system) and eventually after group of AT&T employees at Bell
adding many features of GUI, Labs and Dennis Ritchie. It was
Drivers etc, Linus Torvalds written in “C” language and was
developed the framework of the designed to be a portable, multi-
OS that became LINUX in 1992. tasking and multi-user system in a
The LINUX kernel was released time-sharing configuration
on 17th September, 1991

Linux Distribution (Operating System) Names

A few popular name:
1.Redhat Enterprise Linux
2.Fedora Linux

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

3.Debian Linux
4.Suse Enterprise Linux

5.Ubuntu Linux
Common things between Linux & UNIX
Both share many common applications such as: 1.GUI, file, and windows managers (KDE,
Gnome) 2.Shells (ksh, csh, bash)
3. Various office applications such as OpenOffice.org
4. Development tools (perl, php, python, GNU c/c++ compilers)
5. Posix interface
Layered Architecture:

Linux System Architecture is consists of following layers

 Hardware layer - Hardware consists of all peripheral devices (RAM/ HDD/ CPU etc).
 Kernel - Core component of Operating System, interacts directly with hardware,
provides low level services to upper layer components.
 Shell - An interface to kernel, hiding complexity of kernel's functions from users. Takes
commands from user and executes kernel's functions.
 Utilities - Utility programs giving user most of the functionalities of an operating
systems.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

LINUX File system

Linux file structure files are grouped according to purpose. Ex: commands, data files,
documentation. Parts of a Unix directory tree are listed below. All directories are grouped
under the root entry "/". That part of the directory tree is left out of the below diagram.

1. / – Root
 Every single file and directory starts from the root directory.
 Only root user has write privilege under this directory.
 Please note that /root is root user’s home directory, which is not same as /.
2. /bin – User Binaries
 Contains binary executables.
 Common linux commands you need to use in single-user modes are located under this
directory.
 Commands used by all the users of the system are located here.
 For example: ps, ls, ping, grep, cp
3. /sbin – System Binaries
 Just like /bin, /sbin also contains binary executables.
 But, the linux commands located under this directory are used typically by system
aministrator, for system maintenance purpose.
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 For example: iptables, reboot, fdisk, ifconfig, swapon

4. /etc – Configuration Files

 Contains configuration files required by all programs.

 This also contains startup and shutdown shell scripts used to start/stop individual
programs.
 For example: /etc/resolv.conf, /etc/logrotate.conf
5. /dev – Device Files
 Contains device files.
 These include terminal devices, usb, or any device attached to the system.
 For example: /dev/tty1, /dev/usbmon0
6. /proc – Process Information

Contains information about system process.

 This is a pseudo filesystem contains information about running process. For example:
/proc/{pid} directory contains information about the process with that particular pid.
 This is a virtual filesystem with text information about system resources. For example:
/proc/uptime
7. /var – Variable Files
 var stands for variable files.
 Content of the files that are expected to grow can be found under this directory.
 This includes — system log files (/var/log); packages and database files (/var/lib); emails
(/var/mail); print queues (/var/spool); lock files (/var/lock); temp files needed across
reboots (/var/tmp);
8. /tmp – Temporary Files
 Directory that contains temporary files created by system and users.
 Files under this directory are deleted when system is rebooted.
9. /usr – User Programs
 Contains binaries, libraries, documentation, and source-code for second level programs.
 /usr/bin contains binary files for user programs. If you can’t find a user binary under
/bin, look under /usr/bin. For example: at, awk, cc, less, scp

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 /usr/sbin contains binary files for system administrators. If you can’t find a system
binary under /sbin, look under /usr/sbin. For example: atd, cron, sshd, useradd, userdel
 /usr/lib contains libraries for /usr/bin and /usr/sbin
 /usr/local contains users programs that you install from source. For example, when you
install apache from source, it goes under /usr/local/apache2
10. /home – Home Directories
 Home directories for all users to store their personal files.
 For example: /home/john, /home/nikita
11. /boot – Boot Loader Files
 Contains boot loader related files.
 Kernel initrd, vmlinux, grub files are located under /boot
 For example: initrd.img-2.6.32-24-generic, vmlinuz-2.6.32-24-generic
12. /lib – System Libraries
 Contains library files that supports the binaries located under /bin and /sbin
 Library filenames are either ld* or lib*.so.*
 For example: ld-2.11.1.so, libncurses.so.5.7
13. /opt – Optional add-on Applications

opt stands for optional.

 Contains add-on applications from individual vendors.
 add-on applications should be installed under either /opt/ or /opt/ sub-directory.
14. /mnt – Mount Directory
 Temporary mount directory where sysadmins can mount filesystems.
15. /media – Removable Media Devices
 Temporary mount directory for removable devices.
 For examples, /media/cdrom for CD-ROM; /media/floppy for floppy drives;
/media/cdrecorder for CD writer
16. /srv – Service Data
 srv stands for service.
 Contains server specific services related data.
 For example, /srv/cvs contains CVS related data.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Linux Utilities:

File Handling utilities:

Cat Command:

cat linux command concatenates files and print it on the standard output.

SYNTAX:
The Syntax is
cat [OPTIONS] [FILE]...

OPTIONS:
-A Show all.
-b Omits line numbers for blank space in the output.
-e A $ character will be printed at the end of each line prior to a new line.
-E Displays a $ (dollar sign) at the end of each line.
-n Line numbers for all the output lines.
-s If the output has multiple empty lines it replaces it with one empty line.
-T Displays the tab characters in the output.
Non-printing characters (with the exception of tabs, new-lines and form-feeds)
-v are printed visibly.

Example:
To Create a new file: cat >
file1.txt
This command creates a new file file1.txt. After typing into the file press control+d
(^d) simultaneously to end the file.

1. To Append data into the

file: cat >> file1.txt
To append data into the same file use append operator >> to write into the file, else
the file will be overwritten (i.e., all of its contents will be erased).

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

To display a
file:cfile1.txt

This command displays the data in the file.

2. To concatenate several files and
display: cat file1.txt file2.txt

The above cat command will concatenate the two files (file1.txt and file2.txt) and it will
display the output in the screen. Sometimes the output may not fit the monitor screen. In
such situation you can print those files in a nlew file or display the file using less command.
cat file1.txt file2.txt | less

3. To concatenate several files and to transfer the output to anotherfile.

cat file1.txt file2.txt > file3.txt
In the above example the output is redirected to new file file3.txt. The cat command will
create new file file3.txt and store the concatenated output into file3.txt.

rm COMMAND:
rm linux command is used to remove/delete the file from the directory.

SYNTAX:
The Syntax is
rm [options..] [file | directory]

OPTIONS:

-f Remove all files in a directory without prompting the user.

Interactive. With this option, rm prompts for confirmation before removing
-i
any files.
Recursively remove directories and subdirectories in the argument list. The
directory will be emptied of files and removed. The user is normally prompted
-r (or)
-R for removal of any write-protected files which the directory
contains.
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

EXAMPLE:
1. To Remove / Delete a file:
rm file1.txt
Here rm command will remove/delete the file file1.txt.
2. To delete a directory tree:
rm -ir tmp
This rm command recursively removes the contents of all subdirectories of the tmp
directory, prompting you regarding the removal of each file, and then removes the
tmp directory itself.
3. To remove more files at once
rm file1.txt file2.txt
rm command removes file1.txt and file2.txt files at the same time.
cd COMMAND:
cd command is used to change the directory.

SYNTAX:
The Syntax is cd [directory | ~ | ./ | ../ | - ]

OPTIONS:
-L Use the physical directory structure.
-P Forces symbolic links.

EXAMPLE:
1. cd linux-command
This command will take you to the sub-directory(linux-command) from its parent directory.
2. cd ..
This will change to the parent-directory from the current working directory/sub-directory.

3. cd ~
This command will move to the user's home directory which is "/home/username".
cp COMMAND:
cp command copy files from one location to another. If the destination is an existing file, then
the file is overwritten; if the destination is an existing directory, the file is copied into the directory
(the directory is not overwritten).

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

SYNTAX:
The Syntax is
cp [OPTIONS]... SOURCE DEST
cp [OPTIONS]... SOURCE... DIRECTORY
cp [OPTIONS]... --target-directory=DIRECTORY SOURCE...

OPTIONS:

-a same as -dpR.
--backup[=CONTROL] make a backup of each existing destination file
-b like --backup but does not accept an argument.
if an existing destination file cannot be opened, remove it and try
-f
again.
-p same as --preserve=mode,ownership,timestamps.
preserve the specified attributes
-
(default: mode,ownership,timestamps) and security
preserve[=ATTR_LIST]
contexts, if possible
additional attributes: links, all.
--no-
don't preserve the specified attribute.
preserve=ATTR_LIST
--parents append source path to DIRECTORY.
EXAMPLE:
Copy two
files: cp
file1
file2
The above cp command copies the content of file1.php to file2.php.

1. To backup the copied

file: cp -b file1.php
file2.php
Backup of file1.php will be created with '~' symbol as file2.php~.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

2. Copy folder and

subfolders: cp -R scripts
scripts1
The above cp command copy the folder and subfolders from scripts to scripts1.

ls COMMAND:
ls command lists the files and directories under current working directory.

SYNTAX:
The
Syntax is
ls [OPTIONS]... [FILE]

OPTIONS:
Lists all the files, directories and their mode, Number of links, owner of the
-l
file, file size, Modified date and time and filename.
-t Lists in order of last modification time.
-a Lists all entries including hidden files.
-d Lists directory files instead of contents.
-p Puts slash at the end of each directories.
-u List in order of last access time.
-i Display inode information.
-ltr List files order by date.
- List files order by file size.
lSr
EXAMPLE:
Display root directory contents: ls
/ lists the contents of root
directory.
1. Display hidden files anddirectories:
ls -a
lists all entries including hidden files and directories.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

2. Display inode information:

ls -i

7373073 book.gif
7373074 clock.gif
7373082 globe.gif
7373078 pencil.gif
7373080 child.gif

7373081 email.gif
7373076 indigo.gif
The above command displays filename with inode value.

ln COMMAND:
ln command is used to create link to a file (or) directory. It helps to provide soft link for
desired files. Inode will be different for source and destination.
SYNTAX:
The
Syntax
is
ln [options] existing file(or directory)name new file(or directory)name

OPTIONS:

Link files without questioning the user, even if the mode of target forbids
-f
writing. This is the default if the standard input is not a terminal.
-n Does not overwrite existing files.
-s Used to create soft links.
EXAMPLE:

1. ln -s file1.txt file2.txt
Creates a symbolic link to 'file1.txt' with the name of 'file2.txt'. Here inode for 'file1.txt'
and 'file2.txt' will be different.
2. ln -s nimi nimi1
Creates a symbolic link to 'nimi' with the name of 'nimi1'.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

chown COMMAND:
chown command is used to change the owner / user of the file or directory. This is an admin
command, root user only can change the owner of a file or directory.

SYNTAX:
The Syntax is
chown [options] newowner filename/directoryname

OPTIONS:

Change the permission on files that are in the subdirectories of the directory
-R
that you are currently in.
-c Change the permission for each file.
Prevents chown from displaying error messages when it is unable to change
-f
the ownership of a file.

EXAMPLE:

1. chown hiox test.txt

The owner of the 'test.txt' file is root, Change to new user hiox.

chown -R hiox test

The owner of the 'test' directory is root, With -R option the files and subdirectories
user also gets changed.

2. chown -c hiox calc.txt

Here change the owner for the specific 'calc.txt' file only.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

SECURITY BY FILE PERMISSIONS

Chmod Command:

chmod command allows you to alter / Change access rights to files and directories.

File Permission is given for users, group and others as,

Read Write Execute

User

Group

Others
Permission 000

SYNTAX:
The Syntax is
chmod [options] [MODE] FileName

File Permission

# File Permission
0 none
1 execute only
2 write only
3 write and execute
4 read only
5 read and execute
6 read and write
7 set all permissions

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

OPTIONS:

-c Displays names of only those files whose permissions are being changed
-f Suppress most error messages

Change files and directories recursively

R

-v Output version information and exit.

EXAMPLE:

1. To view your files with what permission they are:

ls -alt
This command is used to view your files with what permission they are.
2. To make a file readable and writable by the group and others.
chmod 066 file1.txt
3. To allow everyone to read, write, and execute the file
chmod 777 file1.txt

mkdir COMMAND:
mkdir command is used to create one or more directories.

SYNTAX:
The Syntax is
mkdir [options] directories

OPTIONS:

-m Set the access mode for the new directories.

-p Create intervening parent directories if they don't exist.
-v Print help message for each directory created.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

EXAMPLE:
1. Create directory:
mkdir test
The above command is used to create the directory 'test'.
2. Create directory and set permissions:
mkdir -m 666 test
The above command is used to create the directory 'test' and set the read and write permission.

rmdir COMMAND:
rmdir command is used to delete/remove a directory and its subdirectories.

SYNTAX:
The Syntax is
rmdir [options..] Directory

OPTIONS:
Allow users to remove the directory dirname and its parent directories which
-p
become empty.

EXAMPLE:

1. To delete/remove a directory
rmdir tmp
rmdir command will remove/delete the directory tmp if the directory is empty.

2. To delete a directory tree:

rm -ir tmp

This command recursively removes the contents of all subdirectories of the tmp directory,
prompting you regarding the removal of each file, and then removes the tmp directory
itself.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

mv COMMAND:
mv command which is short for move. It is used to move/rename file from one directory to
another. mv command is different from cp command as it completely removes the file from the
source and moves to the directory specified, where cp command just copies the content from one
file to another.
SYNTAX:
The Syntax is
mv [-f] [-i] oldname newname

OPTIONS:

This will not prompt before overwriting (equivalent to --reply=yes). mv -f will

-f
move the file(s) without prompting even if it is writing over an existingtarget.
-i Prompts before overwriting another file.

EXAMPLE:

1. To Rename / Move a file:

mv file1.txt file2.txt
This command renames file1.txt as file2.txt
2. To move a directory
mv hscripts tmp

In the above line mv command moves all the files, directories and sub-directories from
hscripts folder/directory to tmp directory if the tmp directory already exists. If there is no
tmp directory it rename's the hscripts directory as tmp directory.

3. To Move multiple files/More files into another directory

mv file1.txt tmp/file2.txt newdir
This command moves the files file1.txt from the current directory and file2.txt from the tmp
folder/directory to newdir.

diff COMMAND:
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

diff command is used to find differences between two files.

SYNTAX:
The Syntax is
diff [options..] from-file to-file

OPTIONS:

-a Treat all files as text and compare them line-by-line.

-b Ignore changes in amount of white space.
-c Use the context output format.
-e Make output that is a valid ed script.

Use heuristics to speed handling of large files that have numerous scattered
-H
small changes.

-i Ignore changes in case; consider upper- and lower-case letters equivalent.

Prints in RCS-format, like -f except that each command specifies the number
-n
of lines affected.
Output RCS-format diffs; like -f except that each command specifies the
-q
number of lines affected.

-r When comparing directories, recursively compare any subdirectories found.

-s Report when two files are the same.
-w Ignore white space when comparing lines.
-y Use the side by side output format.

EXAMPLE:

Lets create two files file1.txt and file2.txt and let it have the following data.

Data in file1.txt Data in file2.txt

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

HIOX TEST
HIOX TEST
hscripts.com
HSCRIPTS.com
with friend
with friend ship
ship hiox
india

1. Compare files ignoring white space:

diff -w file1.txt file2.txt
This command will compare the file file1.txt with file2.txt ignoring white/blank space
and it will produce the following output.
2c2

< hscripts.com
---
> HSCRIPTS.com
4d3
< Hioxindia.com

2. Compare the files side by side, ignoring whitespace:

diff -by file1.txt file2.txt
This command will compare the files ignoring white/blank space, It is easier
to differentiate the files.
HIOX TEST HIOX TEST
hscripts.com |
HSCRIPTS.com with friend ship
with friend ship

Hioxindia.com <

The third line(with friend ship) in file2.txt has more blank spaces, but still the -b ignores

the blank space and does not show changes in the particular line, -y print out
the result side by side.

3. Compare the files ignoring case.

diff -iy file1.txt file2.txt

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

This command will compare the files ignoring case(upper-case and lower-case) and
displays the following output.
HIOX TEST HIOX TEST
hscripts.com HSCRIPTS.com with
friend ship with friendship

chgrp COMMAND:
chgrp command is used to change the group of the file or directory. This is an admin command.
Root user only can change the group of the file or directory.

SYNTAX:
The Syntax is
chgrp [options] newgroup filename/directory name

OPTIONS:
Change the permission on files that are in the subdirectories of the directory
-R
that you are currently in.
-c Change the permission for each file.
-f Force. Do not report errors.

Hioxindia.com <
EXAMPLE:
chgrp hiox test.txt
The group of 'test.txt' file is root, Change to newgroup hiox.
1. chgrp -R hiox test
The group of 'test' directory is root. With -R, the files and its subdirectories also
changes to newgroup hiox.
2. chgrp -c hiox calc.txt
They above command is used to change the group for the specific file('calc.txt') only.
About wc
Short for word count, wc displays a count of lines, words, and characters in a file.

Syntax

wc [-c | -m | -C] [-l] [-w] [ file ... ]

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-c Count bytes.

-m Count characters.

-C Same as -m.

-l Count lines.

-w Count words delimited by white space characters or new line characters.

Delimiting characters are Extended Unix Code (EUC) characters from any code
set defined by iswspace()

File Name of file to word count.

Examples

wc myfile.txt - Displays information about the file myfile.txt. Below is an example of

the output. 5 13 57 myfile.txt 5
= Lines

13 = Words
57 =Characters
About split
Split a file into pieces.
Syntax

split [-linecount | -l linecount ] [ -a suffixlength ] [file [name] ] split -b n [k | m] [ -a suffixlength ] [ file [name]]

-line count | Number of lines in each piece. Defaults to 1000 lines.

-l linecount

-a Use suffix length letters to form the suffix portion of the filenames of the split file.
suffixlen If -a is not specified, the default suffix length is 2. If the sum of the name operand
gth and the suffix length option-argument would create a filename exceeding
NAME_MAX bytes, an error will result; split will exit with a diagnostic message

and no files will be created.

-b n Split a file into pieces n bytes in size.

-b n k Split a file into pieces n*1024 bytes in size.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-b n m Split a file into pieces n*1048576 bytes in size.

File The path name of the ordinary file to be split. If no input file is given or file is -, the
standard input will be used.

name The prefix to be used for each of the files resulting from the split operation. If no name argument is
given, x will be used as the prefix of the output files. The combined length of the basename of prefix
and suffixlength cannot exceed
NAME_MAX bytes; see OPTIONS.

Examples

split -b 22 newfile.txt new - would split the file "newfile.txt" into three separate files called
newaa, newab and newac each file the size of 22.
split -l 300 file.txt new - would split the file "newfile.txt" into files beginning with the name
"new" each containing 300 lines of text each
About settime and touch
Change file access and modification time.

Syntax

touch [-a] [-c] [-m] [-r ref_file | -t time ] file settime [ -f ref_file ] file

-a Change the access time of file. Do not change the modification time unless -m is

also specified.
-c Do not create a specified file if it does not exist. Do not write any diagnostic
messages concerning this condition.

-m Change the modification time of file. Do not change the access time unless -a is
also specified.

-r ref_file Use the corresponding times of the file named by ref_file instead of the current
time.

Use suffixlength letters to form the suffix portion of the filenames of the split file.
suffixlen If -a is not specified, the default suffix length is 2. If the sum of the name operand
gth and the suffixlength option-argument would create a filename exceeding
NAME_MAX bytes, an error will result; split will exit with a diagnostic message

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

and no files will be created.

-b n Split a file into pieces n bytes in size.

-b n k Split a file into pieces n*1024 bytes in size.

-b n m Split a file into pieces n*1048576 bytes in size.

File The path name of the ordinary file to be split. If no input file is given or file is -, the
standard input will be used.

name

The prefix to be used for each of the files resulting from the split operation. If no
name argument is given, x will be used as the prefix of the output files. The
combined length of the base name of prefix and suffixlength cannot exceed
NAME_MAX bytes; see OPTIONS.

Examples

split -b 22 newfile.txt new - would split the file "newfile.txt" into three separate files called
newaa, newab and newac each file the size of 22.
split -l 300 file.txt new - would split the file "newfile.txt" into files beginning with the name
"new" each containing 300 lines of text each
About settime and touch
Change file access and modification time.

Syntax:

touch [-a] [-c] [-m] [-r ref_file | -t time ] file settime [ -f ref_file ] file

-a Change the access time of file. Do not change the modification time unless -m is

also specified.
-c Do not create a specified file if it does not exist. Do not write any diagnostic
messages concerning this condition.

-m Change the modification time of file. Do not change the access time unless -a is
also specified.

-r ref_file Use the corresponding times of the file named by ref_file instead of the current
time.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-t time Use the specified time instead of the current time. time will be a decimal number
of the form:

[[CC]YY]MMDDhhmm [.SS]

MM - The month of the year [01-12].

DD - The day of the month [01-31].
hh - The hour of the day [00-23].
mm - The minute of the hour [00-59].
CC - The first two digits of the year. YY
- The second two digits of the year.
SS - The second of the minute [00-61].

-f ref_file Use the corresponding times of the file named by ref_file instead of the current time.

File A path name of a file whose times are to be modified.

Examples

settime myfile.txt

Sets the file myfile.txt as the current time / date.

touch newfile.txt

Creates a file known as "newfile.txt", if the file does not already exist. If the file already exists the
accessed
/ modification time is updated for the file newfile.txt
About comm
Select or reject lines common to two files.
Syntax
comm [-1] [-2] [-3 ] file1 file2

-1 Suppress the output column of lines unique to file1.

-2 Suppress the output column of lines unique to file2.

-3 Suppress the output column of lines duplicated in file1 and file2.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

file1 Name of the first file to compare.

file2 Name of the second file to compare.

Examples

comm myfile1.txt myfile2.txt

The above example would compare the two files myfile1.txt and myfile2.txt.

PROCESS UTILITIES

ps Command:
ps command is used to report the process status. ps is the short name for Process Status.

SYNTAX:
The Syntax is ps
[options]
OPTIONS:
List information about all processes most frequently requested: all those
-a
except process group leaders and processes not associated with a terminal..
-A List information for all processes.
or e
-d List information about all processes except session leaders.
-e List information about every process now running.
-f Generates a full listing.

-j Print session ID and process group ID.

-l Generate a long listing.

EXAMPLE:

1. ps
Output:
ID TTY TIME CMD
2540 pts/1 00:00:00 bash
2621 pts/1 00:00:00 ps
In the above example, typing ps alone would list the current running processes.

2. ps -f
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Output:
UID PID PPID C STIME TTY TIME CMD
nirmala 2540 2536 0 15:31 pts/1 00:00:00 bash
nirmala 2639 2540 0 15:51 pts/1 00:00:00
ps-f Displays full information about currently running
processes.

kill COMMAND:
kill command is used to kill the background process.

SYNTAX:
The Syntax is
kill [-s] [-l] %pid

OPTIONS:

Specify the signal to send. The signal may be given as a signal name or
-s
number.
Write all values of signal supported by the implementation, if no operand is
-l
given.
- Process id or job id.
pid
-9 Force to kill a process.

EXAMPLE:

Step by Step process:

 Open a process music player.

xmms
press ctrl+z to stop the process.
 To know group id or job id of the background task.
jobs -l
 It will list the background jobs with its job id as,
 xmms 3956
kmail 3467
 To kill a job or process.
 kill 3956
kill command kills or terminates the background process xmms.
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

About nice
Invokes a command with an altered scheduling priority.
Syntax

nice [-increment | -n increment ] command [argument ... ]

-increment increment must be in the range 1-19; if not specified, an increment of 10 is

| - n assumed. An increment greater than 19 is equivalent to 19.
increment The super-user may run commands with priority higher than normal by using a
negative increment such as -10. A negative increment assigned by an
unprivileged user is ignored.

command The name of a command that is to be invoked. If command names any of the special
built-in utilities, the results are undefined.

argument Any string to be supplied as an argument when invoking command.

Examples

nice +13 pico myfile.txt - runs the pico command on myfile.txt with an increment of +13.
About at
Schedules a command to be ran at a particular time, such as a print job late at night.

Syntax

at executes commands at a specified time.

atq lists the user's pending jobs, unless the user is the superuser; in that case, everybody's jobs
are listed. The format of the output lines (one for each job) is: Job number, date, hour, job

class.

atr deletes jobs, identified by their job number.

m
batch executes commands when system load levels permit; in other words, when the load
average drops below 1.5, or the value specified in the invocation of atrun.

at [-c | -k | -s] [-f filename] [-q queuename] [-m] -t time [date] [-l] [-r]

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-c C shell. csh(1) is used to execute the at-job.

-k Korn shell. ksh(1) is used to execute the at-job.

-s Bourne shell. sh(1) is used to execute the at-job.

-f Specifies the file that contains the command to run.

filename
-m Sends mail once the command has been run.

-t time Specifies at what time you want the command to be ran. Format hh:mm. am / pm
indication can also follow the time otherwise a 24-hour clock is used. A timezone
name of GMT, UCT or ZULU (case insensitive) can follow to specify that the time
is in Coordinated Universal Time. Other timezones can be specified using the TZ
environment variable. The below quick times can also be entered: midnight -
Indicates the time 12:00 am (00:00).
noon - Indicates the time 12:00 pm.
now - Indicates the current day and time. Invoking at - now will submit submit
an at-job for potentially immediate execution.

date Specifies the date you wish it to be ran on. Format month, date, year. The following
quick days can also be entered:

today - Indicates the current day.

tomorrow - Indicates the day following the current day.

-l Lists the commands that have been set to run.

-r Cancels the command that you have set in the past.

Examples:

at -m 01:35 < atjob = Run the commands listed in the 'atjob' file at 1:35AM, in addition all output
that is generated from job mail to the user running the task. When this command has been
successfully enter you should receive a prompt similar to the below example.
Commands will be executed using /bin/csh job 1072250520.a at Wed Dec 24
00:22:00 2003 at -l = This command will list each of the scheduled jobs as seen below.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

1072250520.a
Wed Dec 24 00:22:00 2003
at -r 1072250520.a = Deletes the job just created. or
atrm 23 = Deletes job 23.
If you wish to create a job that is repeated you could modify the file that executes the commands with
another command that recreates the job or better yet use the crontab command.
Note: Performing just the at command at the prompt will give you an error "Garbled Time",
this is a standard error message if no switch or time setting is given.
DISK UTILITIES

du (abbreviated from disk usage) is a standard Unix program used to estimate file space usage—
space used under a particular directory or files on a file system.
Du takes a single argument, specifying a path name for du to work; if it is not specified, the
current directory is used. The SUS mandates for du the following options:

-a, display an entry for each file (and not directory) contained in the current directory
-H, calculate disk usage for link references specified on the command line

-k, show sizes as multiples of 1024 bytes, not 512-byte

-L, calculate disk usage for link references anywhere

-s, report only the sum of the usage in the current directory, not for each file

-x, only traverse files and directories on the device on which the pathname argument is specified.

the Unix and Unix-like operating systems may add extra options. For example, BSD and GNU du
specify a - h option, displaying disk usage in a format easier to read by the user, adding units with
the appropriate SI prefix’

$ du -sk *
152304 directoryOne
1856548 directoryTwo

Sum of directories in human-readable format (Byte, Kilobyte, Megabyte, Gigabyte, Terabyte and Petabyte):

$ du -sh *
149M directoryOne
1.8G directoryTwo

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

disk usage of all subdirectories and files including hidden files within the current directory
(sorted by filesize) :

$ du -sk .[!.]* *| sort -n

disk usage of all subdirectories and files including hidden files within the current directory
(sorted by reverse filesize) :

$ du -sk .[!.]* *| sort –nr

The weight of directories:

$ du -d 1 -c -h
df command : Report file system disk space usage
Df command examples - to check free disk space
Type df -h or df -k to list free disk space:
$ df -h
OR

$ df –k
Output:
Filesystem Size Used Avail Use% Mounted on
/dev/sdb1 20G 9.2G 9.6G 49% /
varrun 393M 144k 393M 1% /var/run
varlock 393M 0 393M 0% /var/lock
procbususb 393M 123k 393M 1%
/proc/bus/usb udev 393M 123k
393M 1% /dev
devshm 393M 0 393M 0% /dev/shm
lrm 393M 35M 359M 9% /lib/modules/2.6.20-15-generic/volatile
/dev/sdb5 29G 5.4G 22G 20% /media/docs
/dev/sdb3 30G 5.9G 23G 21% /media/isomp3s
/dev/sda1 8.5G 4.3G 4.3G 51% /media/xp1
/dev/sda2 12G 6.5G 5.2G 56% /media/xp2
/dev/sdc1 40G 3.1G 35G 9% /media/backup
du command examples

du shows how much space one ore more files or directories is using.

$ du -sh 103M
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-s option summarize the space a directory is using and -h option provides "Human-readable" output.

NETWORKING COMMANDS

These are most useful commands in my list while working on Linux server , this enables you
to quickly troubleshoot connection issues e.g. whether other system is connected or not ,
whether other host is responding or not and while working for FIX connectivity for
advanced trading system this tools saves quite a lot of time

This article is in continuation of my article How to work fast in Unix and Unix
Command tutorials and Examples for beginners.

• finding host/domain name and IP address - hostname

• test network connection – ping
• getting network configuration – ifconfig
• Network connections, routing tables, interface statistics – netstat
• query DNS lookup name – nslookup
• communicate with other hostname – telnet
• outing steps that packets take to get to network host – traceroute
• view user information – finger
• checking status of destination host - telnet
• Example of Networking commands in
Unix

let's see some example of various networking command in Unix and Linux. Some of them are
quite basic e.g. ping and telnet and some are more powerful e.g. nslookup and netstat. When you
used these commands in combination of find and grep you can get anything you are looking for
e.g. hostname, connection end points, connection status etc.

hostname
hostname with no options displays the machines host name
hostname –d displays the domain name the machine belongs to
hostname –f displays the fully qualified host and domain name
hostname –i displays the IP address for the current machine
ping
It sends packets of information to the user-defined source. If the packets are received,
the destination device sends packets back. Ping can be used for two purposes
1. To ensure that a network connection can be established.
2. Timing information as to the speed of the connection.
If you do ping www.yahoo.com it will display its IP address. Use ctrl+C to stop the test.

ifconfig
View network configuration, it displays the current network adapter configuration. It is handy to
determine if you are getting transmit (TX) or receive (RX) errors.
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

netstat
Most useful and very versatile for finding connection to and from the host. You can find out
all the multicast groups (network) subscribed by this host by issuing "netstatg"netstat -nap |
grep port will display process id of application which is using that port netstat -a or netstat –
all will display all connections including TCP and UDP netstat --tcp or netstat –t will display
only TCP connection

etstat --udp or netstat –u will display only UDP connection netstat -g will display all multicast network subscribed
by this host. slookup
If you know the IP address it will display hostname. To find all the IP addresses for a given
domain name, the command nslookup is used. You must have a connection to the internet for
this utility to be useful.
E.g. nslookup blogger.com

You can also use nslookup to convert hostname to IP Address and from IP Address from hostname.
Traceroute
A handy utility to view the number of hops and response time to get to a remote system or
web site is traceroute. Again you need an internet connection to make use of this tool.
finger
View user information, displays a user’s login name, real name, terminal name and write status.
this is pretty old unix command and rarely used now days.
telnet
Connects destination host via telnet protocol, if telnet connection establish on any port means
connectivity between two hosts is working fine.
telnet hostname port will telnet hostname with the port specified. Normally it is used to see
whether host is alive and network connection is fine or not.

10 Most important linux networking commands

Linux is most powerful operating system which often needs to use commands to explore it
effectively.Some of the commands are restricted to normal user groups as they are powerful and
has more functionality involved in it.Here we summarized most interesting and useful networking
commands which every linux user are supposed to be familiar with it.

1. Arp manipulates the kernel’s ARP cache in various ways. The primary options are clearing an
address mapping entry and manually setting up one. For debugging purposes, the arp program
also allows a complete dump of the ARP cache.ARP displays the IP address assigned to particular
ETH card and mac address

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

[fasil@smashtech ]# arp
Address HWtype HWaddress Flags Mask Iface
59.36.13.1 ether C eth0

2. Ifconfig is used to configure the network interfaces. Normally we use this command tocheck
the IP address assigned to the system.It is used at boot time to set up interfaces as
necessary. After that, it is usually only needed when debugging or when system tuning is needed.

[fasil@smashtech ~]# /sbin/ifconfig

eth0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:126341 errors:0 dropped:0 overruns:0 frame:0
TX packets:44441 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
3. Netstat prints information about the networking subsystem. The type of information which is
usually printed by netstat are Print network connections, routing tables, interface statistics,
masquerade connections, and multicast.
fasil@smashtech ~]# netstat
Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address Foreign Address
State tcp 0 0 .230.87:https
ESTABLISHED
Active UNIX domain sockets (w/o servers)
Proto RefCnt Flags Type State I-Node Path
unix 10 [ ] DGRAM 4970 /dev/log
unix 2 [] DGRAM 6625 @/var/run/hal/hotplug_socket
unix 2 [] DGRAM 2952 @udevd
unix 2 [] DGRAM 100564
unix 3 [] STREAM CONNECTED 62438 /tmp/.X11-unix/X0
unix 3 [] STREAM CONNECTED 62437

unix 3 [] STREAM CONNECTED 10271 @/tmp/fam-root-

unix 3 [] STREAM CONNECTED 10270
unix 3 [] STREAM CONNECTED 9276
unix 3 [] STREAM CONNECTED 9275

4. ping command is used to check the connectivity of a system to a network.Whenever there is

problem in network connectivity we use ping to ensure the system is connected tonetwork.
[root@smashtech ~]# ping google.com

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

PING google.com (74.125.45.100) 56(84) bytes of data.

64 bytes from yx-in-f100.google.com (74.125.45.100): icmp_seq=0 ttl=241 time=295
ms 64 bytes from yx-in-f100.google.com (74.125.45.100): icmp_seq=1 ttl=241
time=277 ms 64 bytes from yx-in- f100.google.com (74.125.45.100): icmp_seq=2
ttl=241 time=277 ms

--- google.com ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time
6332ms rtt min/avg/max/mdev =
277.041/283.387/295.903/8.860 ms, pipe 2

5. Nslookup is a program to query Internet domain name servers. Nslookup has two modes:
interactive and non-interactive. Interactive mode allows the user to query name servers for
information about various hosts and domains or to print a list of hosts in a domain. Non-
interactive mode is used to print just the name and requested information for a host ordomain.

[fasil@smashtech ~]# nslookup

google.com Server: server ip
Address: gateway ip 3

Non-authoritative
answer:
Name:google.com
Address:
209.85.171.100
Name:google.com
Address:
74.125.45.100
Name:google.com
Address:
74.125.67.100

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

6. dig (domain information groper) is a flexible tool for interrogating DNS name servers. It
performs DNS lookups and displays the answers that are returned from the name server(s) that
were queried. Most DNS administrators use dig to troubleshoot DNS problems because of its
flexibility, ease of use and clarity of output. Other lookup tools tend to have less functionality
than dig.

[fasil@smashtech ~]# dig google.com

; <<>> DiG 9.2.4 <<>> google.com
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 4716
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 4, ADDITIONAL: 4

;; QUESTION SECTION:
;google.com. IN A

;; ANSWER SECTION:
google.com. 122 IN A 74.125.45.100
google.com. 122 IN A 74.125.67.100
google.com. 122 IN A 209.85.171.100

;; AUTHORITY SECTION:
google.com. 326567 IN NS ns3.google.com.
google.com. 326567 IN NS ns4.google.com.
google.com. 326567 IN NS ns1.google.com.
google.com. 326567 IN NS ns2.google.com.

;; ADDITIONAL SECTION:
ns1.google.com. 152216 IN A 216.239.32.10
ns2.google.com. 152216 IN A 216.239.34.10
ns3.google.com. 152216 IN A 216.239.36.10
ns4.google.com. 152216 IN A 216.239.38.10

;; Query time: 92 msec

;; SERVER: 172.29.36.1#53(172.29.36.1)
;; WHEN: Thu Mar 5 14:38:45 2009
;; MSG SIZE rcvd: 212

7. Route manipulates the IP routing tables. Its primary use is to set up static routes to specific
hosts or networks via an interface after it has been configured with the configure program.
When the add or del options are used, route modifies the routing tables. Without these options,
route displays the current contents of the routing tables.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

[fasil@smashtech ~]# route

Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface

54.192.56.321 * 255.255.255.0 U 0 0 0 eth0

* 255.255.0.0 U 0 0 0 eth0
default 0.0.0.0 UG 0 0 0 eth0
8. Traceroute: Internet is a large and complex aggregation of network hardware, connected
together by gateways. Tracking the route one’s packets follow (or finding the miscreant gateway
that’s discarding your packets) can be difficult.
Traceroute utilizes the IP protocol ‘time to live’ field and attempts to elicit an ICMP
TIME_EXCEEDED response from each gateway along the path to some host.
9.The only mandatory parameter is the destination host name or IP number. The default
probe
datagram length is 40 bytes, but this may be increased by specifying a packet length (in bytes)
after the destination host name.
[fasil@smashtech ~]# traceroute google.com
traceroute: Warning: google.com has multiple addresses; using 209.85.171.100
traceroute to google.com (209.85.171.100), 30 hops max, 38 byte packets

10.W-displays information about the users currently on the machine, and their processes. The
header shows, in this order, the current time, how long the system has been running, how many
users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes.
[fasil@smashtechl ~] # w

15:18:22 up 4:38, 3 users, load average: 0.89, 0.34, 0.19

USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
root :0 - 10:41 ?xdm? 24:53 1.35s /usr/bin/gnome-session
rootpts/1
:0.0 10:58 1.00s 0.34s 0.00s w
root pts/2 :0.0 12:10 23:32 0.03s 0.03s bash

FILTERS
more COMMAND:
more command is used to display text in the terminal screen. It allows only backward movement.
SYNTAX:
The Syntax is
more [options] filename

OPTIONS:

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-c Clear screen before displaying.

-e Exit immediately after writing the last line of the last file in the argument list.
-n Specify how many lines are printed in the screen for a given file.
+n Starts up the file from the given number.

EXAMPLE:

1. more -c index.php
Clears the screen before printing the file .
2. more -3 index.php
Prints first three lines of the given file. Press Enter to display the file line by line.

head COMMAND

head command is used to display the first ten lines of a file, and also specifies how many lines to display.
SYNTAX:
The Syntax is
head [options] filename

OPTIONS:

-n To specify how many lines you want to display.

-n The number option-argument must be a decimal integer whose sign affects
number
the location in the file, measured in lines.
The number option-argument must be a decimal integer whose sign affects
-c
the location in the file, measured in bytes.
number

EXAMPLE:

1. head index.php
This command prints the first 10 lines of 'index.php'.
2. head -5 index.php
The head command displays the first 5 lines of 'index.php'.
3. head -c 5 index.php
The above command displays the first 5 characters of 'index.php'.

tail COMMAND:
tail command is used to display the last or bottom part of the file. By default it displays
last 10 lines of a file.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

SYNTAX:
The Syntax is tail [options] filename

OPTIONS:
-l To specify the units of lines.
-b To specify the units of blocks.
-n To specify how many lines you want to display.
The number option-argument must be a decimal integer whose sign affects the
-c
location in the file, measured in bytes.
number
The number option-argument must be a decimal integer whose sign affects the
n
number location in the file, measured in lines.

EXAMPLE:

tail index.php
It displays the last 10 lines of 'index.php'.
1. tail -2 index.php
It displays the last 2 lines of 'index.php'.
2. tail -n 5 index.php
It displays the last 5 lines of 'index.php'.
3. tail -c 5 index.php
It displays the last 5 characters of 'index.php'.

cut COMMAND:
cut command is used to cut out selected fields of each line of a file. The cut command uses
delimiters to determine where to split fields.

SYNTAX:
The Syntax is cut
[options]
OPTIONS:

-c Specifies character positions.

-b Specifies byte positions.
-d Specifies the delimiters and fields.
flags

EXAMPLE:
1. cut -c1-3 text.txt
Output:
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Cut the first three letters from the above line.

2. cut -d, -f1,2 text.txt

Output:
This is, an example program
The above command is used to split the fields using delimiter and cut the first two fields.

paste COMMAND:
paste command is used to paste the content from one file to another file. It is also used
to set column format for each line.
SYNTAX:
The Syntax is paste [options]

OPTIONS:

-s Paste one file at a time instead of in parallel.

-d Reuse characters from LIST instead of TABs .

EXAMPLE:

1. paste test.txt>test1.txt
Paste the content from 'test.txt' file to 'test1.txt' file.

2. ls | paste - - - -

List all files and directories in four columns for each line.

sort COMMAND:
sort command is used to sort the lines in a text file.
SYNTAX:
The Syntax is
sort [options] filename
OPTIONS:

-r Sorts in reverse order.

-u If line is duplicated display only once.
-o Sends sorted output to a file.
filename

EXAMPLE:

1. sort test.txt
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Sorts the 'test.txt'file and prints result in the screen.

2. sort -r test.txt

Sorts the 'test.txt' file in reverse order and prints result in the screen.
About uniq Report or filter out repeated lines in a file.
Syntax

uniq [-c | -d | -u ] [ -f fields ] [ -s char ] [-n] [+m] [input_file [ output_file ] ]

-c Precede each output line with a count of the number of times the line occurred in

the input.

-d Suppress the writing of lines that are not repeated in the input.

-u Suppress the writing of lines that are repeated in the input.

-f fields Ignore the first fields fields on each input line when doing comparisons, where
fields is a positive decimal integer. A field is the maximal string matched by the
basic regular expression:
[[:blank:]]*[^[:blank:]]*
If fields specifies more fields than appear on an input line, a null string will be
used for comparison.

-s char Ignore the first chars characters when doing comparisons, where chars is a positive
decimal integer. If specified in conjunction with the -f option, the first chars
characters after the first fields fields will be ignored. If chars specifies more
characters than remain on an input line, a null string will be used for comparison.

-n Equivalent to -f fields with fields set to n.

+m Equivalent to -s chars with chars set to m.

input_file A path name of the input file. If input_file is not specified, or if the input_file is -
,the standard input will be used.

output_file
A path name of the output file. If output_file is not specified, the standard output
will be used. The results are unspecified if the file named by output_file is the file
named by input_file.

Examples
uniq myfile1.txt > myfile2.txt - Removes duplicate lines in the first file1.txt and outputs the

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

results to the second file.

About tr
Translate characters.
Syntax

tr [-c] [-d] [-s] [string1] [string2]

-c Complement the set of characters specified by string1.

-d Delete all occurrences of input characters that are specified by string1.

-s Replace instances of repeated characters with a single character.

string1 First string or character to be changed.

string2 Second string or character to change the string1.

Examples
echo "12345678 9247" | tr 123456789 computerh - this example takes an echo response of
'12345678 9247' and pipes it through the tr replacing the appropriate numbers with the letters. In
this example it would return computer hope.
tr -cd '\11\12\40-\176' < myfile1 > myfile2 - this example would take the file myfile1 and strip
all non printable characters and take that results to myfile2.
Text processing utilities and Backup utilities: Text processing utilities:

cat : concatenate files and print on the standard output Usage:

cat [OPTION] [FILE]...

eg. cat file1.txt file2.txt cat n

file1.txt
echo : display a line of text

Usage: echo [OPTION] [string]

... eg. echo I love India

echo $HOME

wc: print the number of newlines, words, and bytes in files

Usage: wc [OPTION]... [FILE]...

eg. wc file1.txt

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

wc L

file1.txt

sort :sort lines of text

files Usage: sort

[OPTION]... [FILE]...

eg. Sort

file1.txt sort r

file1.txt

General Commands:

date COMMAND:
date command prints the date and time.

SYNTAX:
The Syntax is
date [options] [+format] [date]

OPTIONS:

Slowly adjust the time by sss.fff seconds (fff represents fractions of a second).
-a
This adjustment can be positive or negative.Only system admin/ super user
can adjust the time.

- Sets the time and date to the value specfied in the date string. The date str may
date contain the month names, time zones, 'am', 'pm', etc.
-

-u Display (or set) the date in Greenwich Mean Time (GMT-universal time).

Format:

%a Abbreviated weekday(Tue).

% Full weekday(Tuesday).
A
%b Abbreviated month name(Jan).

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

%B Full month name(January).

%c Country-specific date and time format..

% Date in the format %m/%d/%y.

D
%j Julian day of year (001-366).

%n Insert a new line.

%p String to indicate a.m. or p.m.

%T Time in the format %H:%M:%S.

%t Tab space.

Week number in year (01-52); start week on Monday.

V
EXAMPLE:
date command date
The above command will print Wed Jul 23 10:52:34 IST 2008
1. To use tab space:
date +"Date is %D %t Time is %T"
The above command will remove space and print
as Date is 07/23/08 Time is 10:52:34
2. To know the week number of the year,
date -V
The above command will print 30
3. To set the date,
date -s "10/08/2008 11:37:23"
The above command will print Wed Oct 08 11:37:23 IST 2008

who COMMAND:
who command can list the names of users currently logged in, their terminal, the time
they have been logged in, and the name of the host from which they have logged in.
SYNTAX:
The Syntax is
who [options] [file]

OPTIONS:

Print the username of the invoking user, The 'am' and 'i' must be space
am i
separated.
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-b Prints time of last system boot.

-d print dead processes.
-H Print column headings above the output.
-i Include idle time as HOURS:MINUTES. An idle time of . indicates activity
within the last minute.
-m Same as who am i.
-q Prints only the usernames and the user count/total no of users logged in.
-T,- Include user's message status in the output.
w

EXAMPLE:
1. who –Uh
Output:
NAME LINE TIME IDLE PID COMMENT
hiox ttyp3 Jul 10 11:08 . 4578
This sample output was produced at 11 a.m. The "." indiacates activity within the last minute.
2. who am i
who am i command prints the user name.

echo COMMAND:
echo command prints the given input string to standard output.

SYNTAX:
The Syntax is
echo [options..] [string]

OPTIONS:
-n do not output the trailing newline
-e enable interpretation of the backslash-escaped characters listed below
-E disable interpretation of those sequences in STRINGs

Without -E, the following sequences are recognized and interpolated:

the character whose ASCII code is NNN

\NNN
(octal)
\a alert (BEL)
\\ backslash
\b Backspace

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

\c suppress trailing newline

\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab

EXAMPLE:
echo command
echo "hscripts Hiox India"
The above command will print as hscripts Hiox India

To use backspace:
echo -e "hscripts \bHiox \bIndia"
The above command will remove space and print as hscriptsHioxIndia
1. To use tab space in echo command
echo -e "hscripts\tHiox\tIndia"
The above command will print as hscripts Hiox India

passwd COMMAND:
passwd command is used to change your password.

SYNTAX:
The Syntax is passwd [options]
OPTIONS:

-a Show password attributes for all entries.

-l Locks password entry for name.
Deletes password for name. The login name will not be prompted for
-d
password.
Force the user to change password at the next login byexpiring the password
-f
for name.

EXAMPLE:

1. passwd
Entering just passwd would allow you to change the password. After entering passwd
you will receive the following three prompts:
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Current Password:
New Password:
Confirm New Password:

Each of these prompts must be entered correctly for the password to be successfully changed.

pwd COMMAND:
pwd - Print Working Directory. pwd command prints the full filename of the current working directory.

SYNTAX:
The Syntax is pwd [options]

OPTIONS:

-P The pathname printed will not contain symbolic links.

-L The pathname printed may contain symbolic links.

EXAMPLE:

1. Displays the current working directory. Pwd

If you are working in home directory then, pwd command displays the current
working directory as /home.
cal COMMAND:
cal command is used to display the calendar.

SYNTAX:

The Syntax is
cal [options] [month] [year]

OPTIONS:

-1 Displays single month as output.

-3 Displays prev/current/next month output.
-s Displays sunday as the first day of the week.
-m Displays Monday as the first day of the week.

-j Displays Julian dates (days one-based, numbered from January 1).

-y Displays a calendar for the current year.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

EXAMPLE:

1. cal
Output:
September 2008
Su Mo Tu We Th Fr Sa

1 2 3 4 5 6
7 8 9 10 11 12 13
14 15 16 17 18 19 20
21 22 23 24 25 26 27
28 29 30
cal command displays the current month calendar.

2. cal -3 5 2008

Output:
April 2008 May 2008 June 2008
Su Mo Tu We Th Fr Sa Su Mo Tu We Th Fr Sa Su Mo Tu We Th Fr Sa

1 2 3 4 5 1 2 3 1 2 3 4 56 7

6 7 8 9 10 11 12 4 5 6 7 8 9 10 8 9 10 11 12 13
14
13 14 15 16 17 18 11 12 13 14 15 1615 16 17 18 19 20
19 17 21
20 21 22 23 24 25 18 19 20 21 22 2322 23 24 25 26 27
26 24 28
27 28 29 30 25 26 27 28 29 30 31 29 30

Here the cal command displays the calendar of April, May and June month of year 2008.

login Command

Signs into a new system.

Syntax

login [ -p ] [ -d device ] [-h hostname | terminal | -r hostname ] [ name [ environ ] ]

-p Used to pass environment variables to the login shell.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-d device login accepts a device option, device. device is taken to be the path name of the
TTY port login is to operate on. The use of the device option can be expected to
improve login performance, since login will not need to call ttyname. The -d option
is available only to users whose UID and effective UID are root. Any
other attempt to use -d will cause login to quietly exit.

-h Used by in.telnetd to pass information about the remote host and terminal type.
hostname |
terminal

-r hostname Used by in. rlogin to pass information about the remote host.

Examples

login computerhope.com - Would attempt to login to the computer hope domain.

uname command

Print name of current system.

Syntax
uname [-a] [-i] [-m] [-n] [-p] [-r] [-s] [-v] [-X] [-S systemname]

-a Print basic information currently available from the system.

-i Print the name of the hardware implementation (platform).

-m Print the machine hardware name (class). Use of this option is discouraged; use
uname -p instead.

-n Print the node name (the node name is the name by which the system is known to
a communications network).

-p Print the current host's ISA or processor type.

-r Print the operating system release level.

-s Print the name of the operating system. This is the default.

-v Print the operating system version.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

-X Print expanded system information, one information element per line, as

expected by SCO Unix.The displayed information includes:

 system name, node, release, version, machine, and number of CPUs.

 Bus Type, Serial, and Users (set to "unknown" in Solaris)
 OEM# and Origin# (set to 0 and 1, respectively

-S
The node name may be changed by specifying a system name argument. The
Systemnam
system name argument is restricted to SYS_NMLN characters. SYS_NMLN is an
e
implementation specific value defined in <sys/utsname.h>.
Only the super- is allow this capability.

Examples

uname -arv

List the basic system information, OS release, and OS version as shown below.
SunOS hope 5.7 Generic_106541-08 sun4m sparc SUNW, SPARCstation-10
uname -p

Display the Linux platform.

SED
What is sed?

 A non-interactive stream editor

 Interprets sed instructions and performs actions
 Use sed to:
 Automatically perform edits on file(s)
 Simplify doing the same edits on multiplefiles
 Write conversion programs

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Sed Command Syntax (SED SCRIPTS):

Sed Operation:

How Does sed Work?

 sed reads line of input

 line of input is copied into a temporary buffer called pattern space
 editing commands are applied
 subsequent commands are applied to line in the pattern space, not the original input
line

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 once finished, line is sent to output (unless –n option was used)

 line is removed from pattern space

 sed reads next line of input, until end of file

Note: input file is unchanged

Sed instruction format (SED ADDRESSES)

 address determines which lines in the input file are to be processed by the command(s)
 if no address is specified, then the command is applied to each input line
 address types:
 Single-Line address
 Set-of-Lines address
 Range address
 Nested address

Single-Line Address

 Specifies only one line in the input file

 special: dollar sign ($) denotes last line of input file

Examples:
 show only line 3
sed -n -e '3 p' input-file
 show only last line
sed -n -e '$ p' input-file
 substitute “endif” with “fi” on line 10
sed -e '10 s/endif/fi/' input-file

Set-of-Lines Address

 use regular expression to match lines

 written between two slashes
process only lines that match
 may match several lines
 lines may or may not be consecutives

Examples:

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

sed -e ‘/key/ s/more/other/’ input-file sed -n -e ‘/r..t/ p’ input-file

Range Address
 Defines a set of consecutive lines

Format:

start-addr,end-addr(inclusive)
Examples:

10,50 line-number,line-number

10,/R.E/line-number,/RegExp/

/R.E./,10/RegExp/,line-number

/R.E./,/R.E//RegExp/,/RegExp/

Example: Range Address

% sed -n -e ‘/^BEGIN$/,/^END$/p’ input-file

 Print lines between BEGIN and END, inclusive.

BEGIN

Line 1 of input Line 2 of input Line3 of input END

Line 4 of input
Line 5 of input
Nested Address
 Nested address contained within another address
Example:
print blank lines between line 20 and 30

20,30{

/^$/ p
}
Address with !

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

address with an exclamation point (!):

instruction will be applied to all lines that do not match the address Example:
print lines that do not contain “obsolete”

sed -e ‘/obsolete/!p’ input-file [sed commands]

Line Number

 line number command (=) writes the current line number before each matched/output line
Examples:
sed -e '/Two-thirds-time/=' tuition. data sed -e '/^[0-9][0-9]/=' inventory

modify commands

Insert Command: i
 adds one or more lines directly to the output before the address:
 inserted “text” never appears in sed’s pattern space
 cannot be used with a range address; can only be used with the single-line andset-
of-lines address types
Syntax:

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

[address] i\ text

Append Command: a
 adds one or more lines directly to the output after the address:
 Similar to the insert command (i), append cannot be used with a range address.
 Appended “text” does not appear in sed’s pattern space.
Syntax:

[address] a\ text

Change Command: c
 replaces an entire matched line with new text
 accepts four address types:

 single-line, set-of-line, range, and nested addresses.

Syntax:
[address1[,address2]] c\ text

Delete Command: d

 deletes the entire pattern space

 commands following the delete command are ignored since the deleted text is no

longer in the pattern space

Syntax:

[address1[,address 2]] d

Substitute Command (s)

Syntax:

[addr1] [,addr2] s/search/replace/[flags]

 replaces text selected by search string with replacement string

 search string can be regular expression
 flags:

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 global (g), i.e. replace all occurrences

 specific substitution count (integer), default 1

Regular Expressions: use with sed

Substitution Back References

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Example: Replacement String &

$ cat datafile

Charles Main 3.0 .98 3 34

Sharon Gray 5.3 .97 5 23

Patricia 4.0 .7 4 17
Hemenway

TB Savage 4.4 .84 5 20

AM Main Jr. 5.1 .94 3 13

Margot Weber 4.5 .89 5 9

Ann Stephens 5.7 .94 5 13

$ sed -e ‘s/[0-9][0-9]$/&.5/’ datafile

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Charles Main 3.0 .98 3 34.5

Sharon Gray 5.3 .97 5 23.5

Patricia 4.0 .7 4 17.5

Hemenway

TB Savage 4.4 .84 5 20.5

AM Main Jr. 5.1 .94 3 13.5

Margot Weber 4.5 .89 5 9

Ann Stephens 5.7 .94 5 13.5

Transform Command (y)

Syntax: [addr1][,addr2]y/a/b/

 translates one character 'a' to another 'b'

 cannot use regular expression metacharacters
 cannot indicate a range of characters
 similar to “tr” command

Example:

$ sed -e ‘1,10y/abcd/wxyz/’ datafile

sed i/o commands

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Input (next) Command: n and N

 Forces sed to read the next input line

 Copies the contents of the pattern space to output
 Deletes the current line in the pattern space
 Refills it with the next input line
 Continue processing

 N (uppercase) Command
 adds the next input line to the current contents of the pattern space
 useful when applying patterns to two or more lines at the same time

Output Command: p and P

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 Print Command (p)

 copies the entire contents of the pattern space to output
 will print same line twice unless the option “–n” is used
 Print command: P
 prints only the first line of the pattern space

 prints the contents of the pattern space up to and including a new line character
 any text following the first new line is notprinted

List Command (l)

 The list command: l

 shows special characters (e.g. tab, etc)
 The octal dump command (od -c) can be used to produce similarresult

Hold Space

 temporary storage area

used to save the contents of the pattern space

 4 commands that can be used to move text back and forth between the pattern space and
the hold space:
h, H,g, G

File commands

 allows to read and write from/to file while processing standard input
 read: r command
 write: w command
Read File command
Syntax: r filename
 queue the contents of filename to be read and inserted into the output stream at

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

the end of the current cycle, or when the next input line is read

 if filename cannot be read, it is treated as if it were an empty file, without any

error indication
 single address only
Write File command
Syntax: w filename
 Write the pattern space to filename
 The filename will be created (or truncated) before the first input line is read
 all w commands which refer to the same filename are output through the same
FILE stream
Branch Command (b)

 Change the regular flow of the commands in the script file

Syntax: [addr1][,addr2]b[label]

 Branch (unconditionally) to ‘label’ or end of script

 If “label” is supplied, execution resumes at the line following :label; otherwise,
control passes to the end of the script

 Branch label

mylabel

Example: The quit (q)

Command Syntax: [addr]q

 Quit (exit sed) when addr is encountered.

Example: Display the first 50 lines and quit

% sed -e ’50q’ datafile

Same as:
% sed -n -e ‘1,50p’ datafile
% head -50 datafile

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

AWK

What is awk?

 created by: Aho, Weinberger, and Kernighan

 scripting language used for manipulating data and generating reports
 versions of awk
 awk, nawk, mawk, pgawk, …
 GNU awk: gawk
What can you do with awk?
 awk operation:

 scans a file line by line

 splits each input line into fields
 compares input line/fields to pattern
 performs action(s) on matchedlines
 Useful for:
 transform data files
 produce formatted reports
 Programming constructs:
 format output lines
 arithmetic and string operations
 conditionals and loops

The Command: awk

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Basic awk Syntax

awk [options] ‘script’ file(s)

 awk [options] –f script file file(s)

Options:
-F to change input field separator

-f to name script file

Basic awk Program

 consists of patterns & actions:

pattern {action}

 if pattern is missing, action is applied to all lines

 if action is missing, the matched line is printed
 must have either pattern or action
example:
awk '/for/' test file

 prints all lines containing string “for” in test file

Basic Terminology: input file

 A field is a unit of data in a line

 Each field is separated from the other fields by the field separator
 default field separator is whitespace
 A record is the collection of fields in a line

A data file is made up of records

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 Example Input File

Buffers

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 awk supports two types of buffers:

record and field

 field buffer:
 one for each fields in the current record.
 names: $1, $2, …
 record buffer :
 $0 holds the entire record

Some System Variables

FS Field separator (default=whitespace)

RS Record separator (default=\n)

NF Number of fields in current record

NR Number of the current record

OFS Output field separator (default=space)

ORS Output record

separator(default=\n) FILENAME Current

filename

Example: Records and Fields

% cat
emps

Tom Jones 4424 5/12/66 543354

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Mary 5346 11/4/63 28765

Adams

Sally 1654 7/22/54 650000

Chang
Billy Black 1683 9/23/44 336500

% awk '{print NR, $0}' emps

1 Tom Jones 4424 5/12/66 543354

2 Mary Adams 5346 11/4/63 28765

3 Sally Chang 1654 7/22/54 650000

4 Billy Black 1683 9/23/44 336500

Example: Space as Field Separator

% cat
emps

Tom Jones 4424 5/12/66 543354

Mary 5346 11/4/63 28765

Adams

Sally 1654 7/22/54 650000

Chang
Billy 1683 9/23/44 336500
Black

% awk '{print NR, $1, $2, $5}' emps

1 Tom Jones 543354

2 Mary Adams 28765

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

3 Sally Chang 650000

4 Billy Black 336500

Example: Colon as Field Separator

% cat em2

Tom Jones:4424:5/12/66:543354

Mary Adams:5346:11/4/63:28765

Sally Chang:1654:7/22/54:650000

Billy Black:1683:9/23/44:336500

% awk -F: '/Jones/{print $1, $2}' em2

Tom Jones 4424

awk Scripts

 awk scripts are divided into three major parts:

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 comment lines start with #

 BEGIN: pre-processing
 performs processing that must be completed before the file processing starts
(i.e., before awk starts reading records from the input file)
 useful for initialization tasks such as to initialize variables and to create
report headings
 BODY: Processing
 contains main processing logic to be applied to input records
 like a loop that processes input data one record at a time:
 if a file contains 100 records, the body will be executed 100 times, one for
each record
 END: post-processing
 contains logic to be executed after all input data have been processed
 logic such as printing report grand total should be performed in this part
of the script

Pattern / Action Syntax

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Categories of Patterns

Expression Pattern types

 match
 entire input record

o regular expression enclosed by ‘/’s

 explicit pattern-matching expressions

o ~ (match), !~ (not match)

o expression operators
 arithmetic
 relational
 logical

% cat employees2

Tom Jones:4424:5/12/66:543354
Mary Adams:5346:11/4/63:28765
Sally Chang:1654:7/22/54:650000
Billy Black:1683:9/23/44:336500
% awk –F: '/00$/' employees2
Sally Chang:1654:7/22/54:650000
Billy Black:1683:9/23/44:336500

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Example: explicit match

% cat
datafile

northwest Charles Main 3.0 .98 3 34

NW

western WE Sharon Gray 5.3 .97 5 23

southwest Lewis Dalsass 2.7 .8 2 18

SW
southern Suan Chin 5.1 .95 4 15
SO
southeast SE Patricia Hemenway 4.0 .74 17

eastern EA TB Savage 4.4 .84 5 20

northeast NE AM Main 5.1 .94 3 13

north NO Margot Weber 4.5 .89 5 9

central CT Ann 5.7 .94 5 13

Stephens

% awk '$5 ~ /\.[7-9]+/'

datafile

southwest SW Lewis 2.7 .8 2 18

Dalsass
central CT Ann 5.7 .94 5 13
Stephens

Examples: matching with REs

% awk '$2 !~ /E/{print $1, $2}' datafile

northwest NW south west SW southern

SO north NO

central CT

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

% awk '/^[ns]/{print $1}' datafile

northwest
southwest
southern
southeast
northeast
north
Arithmetic Operators

Operator Meaning Example

+ Add x+y

- Subtract x–y

* Multiply x*y

/ Divide x/y

% Modulus x%y

^ Exponential x^y

Example:

% awk '$3 * $4 > 500 {print $0}' file

Relational Operators

Operator Meaning Example

< Less than x<y

<= Less than or equal x<=y

== Equal to x == y
!= Not equal to x != y

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

> Greater than x>y

>= Greater than or equal to x>=y

~ Matched by reg exp x ~ /y/

!~ Not matched by req exp x !~ /y/

Logical Operators
Operator Meaning Example

&& Logical AND a && b

|| Logical OR a || b
! NOT !a

Examples:

% awk '($2 > 5) && ($2 <= 15) {print $0}' file

% awk '$3 == 100 || $4 > 50' file

Range Patterns
 Matches ranges of consecutive input lines

Syntax:
pattern1 , pattern2 {action}
 pattern can be any simple pattern
 pattern1 turns action on
 pattern2 turns action off
Range Pattern Example:

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

AWK ACTIONS

awk expressions

 Expression is evaluated and returns value

 consists of any combination of numeric and string constants, variables,
operators, functions, and regular expressions
 Can involve variables
 As part of expression evaluation
 As target of assignment awk variables
 A user can define any number of variables within an awk script
 The variables can be numbers, strings, or arrays
 Variable names start with a letter, followed by letters, digits, and underscore
 Variables come into existence the first time they are referenced; therefore, they do not
need to be declared before use
 All variables are initially created as strings and initialized to a null string
awk Variables
Format
variable = expression

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Examples:

% awk '$1 ~ /Tom/

{wage = $3 * $4; print wage}' filename
% awk '$4 == "CA" {$4 = "California"; print $0}' filename

awk assignment operators

= assign result of right-hand-side

expression to left- hand-side variable
++ Add 1 to variable
-- Subtract 1 from variable
+= Assign result of addition
-= Assign result of subtraction
*= Assign result of multiplication
/= Assign result of division
%= Assign result of modulo
^= Assign result of exponentiation

Awk example:

File: grades

john 85 92 78 94 88

andrea 89 90 75 90 86

jasper 84 88 80 92 84

 awk script: average

# average five grades

{ total = $2 + $3 + $4 + $5 + $6

avg = total / 5

print $1, avg }

 Run as:

awk –f average grades

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Output Statements:

print
print easy and simple output
printf
print formatted (similar to C printf)
sprint
format string (similar to C sprintf)

Function: print

 Writes to standard output

 Output is terminated by ORS
 default ORS is newline
 If called with no parameter, it will print $0
 Printed parameters are separated by OFS,
 default OFS is blank
 Print control characters are allowed:
 \n \f \a \t \\ … print example
% awk '{print}' grades

john 85 92 78 94 88

andrea 89 90 75 90 86

% awk '{print $0}' grades

john 85 92 78 94 88

andrea 89 90 75 90 86

% awk '{print($0)}' grades

john 85 92 78 94 88

andrea 89 90 75 90 86

Redirecting print output

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 Print output goes to standard output

unless redirected via:

> “file”
>> “file”
| “command”
 will open file or command only once
 subsequent redirections append to already open stream

print Example

% awk '{print $1 , $2 > "file"}' grades

% cat file

john 85

andrea 89

jasper 84

% awk '{print $1,$2 | "sort"}' grades

andrea 89

jasper 84

john 85

% awk '{print $1,$2 | "sort –k 2"}' grades

jasper 84

john 85

andrea 89

% date

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Wed Nov 19 14:40:07 CST 2008

% date |

awk '{print "Month: " $2 "\n Year: ", $6}'

Mo0nth: Nov

Year: 2008

printf: Formatting output

Syntax:

printf(format-string, var1, var2, …)

 works like C printf

 each format specifier in “format-string” requires argument of matching type
Format specifiers

%d %i decimal integer

%c single character

%s string of characters

%f floating point number

%o octal number

%x hexadecimal number

%e scientific floating point notation

%% the letter “%”

Format specifier

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

examples

Format specifier

modifiers

 between “%” and letter

%10s

%7d

%10.4f

%-20s

 meaning:
 width of field, field is printed right justified
 precision: number of digits after decimal point
 “-” will left justify sprintf: Formatting text

Syntax:

sprintf(format-string, var1, var2, …)

 Works like printf, but does not produce output

 Instead it returns formatted string

Example:

{
text = sprintf("1: %d – 2: %d", $1, $2) print text
}

AWK ARRAY
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 awk allows one-dimensional arrays

to store strings or numbers

 index can be number or string

 array need not be declared
 its size
 its elements

array elements are created when first used

 initialized to 0 or “”

Arrays in awk

Syntax:

arrayName[index] = value
Examples:

list[1] = "one" list[2] = "three"

list["other"] = "oh my !"

Illustration: Associative Arrays

 awk arrays can use string as index

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Awk built in split functions split (string, array, fieldsep)

 divides string into pieces separated by fieldsep, and stores the pieces in array
 if the fieldsep is omitted, the value of FS is used.

Example:

Split ("auto-da-fe", a, "-")

sets the contents of the array a asfollows:

a[1] = "auto"

a[2] = "da"

a[3] = "fe"

Example: process sales data

 input file:

 output:
 summary of category sales Illustration: process each input line.
.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Illustration: process each input line

Summary: awk program

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Example: complete program

% cat sales.awk
{
deptSales[$2] += $3
}
END {
for (x in deptSales)
print x, deptSales[x]
}
% awk –f sales.awk sales

awk builtin functions

tolower(string)

 returns a copy of string, with each upper-case character converted to lower-case.

Nonalphabetic characters are left unchanged.

Example: tolower("MiXeD cAsE 123")

returns "mixed case 123"

toupper(string)

 returns a copy of string, with each lower-case character converted to upper-case.

awk Example: list of products

103:sway bar:49.99

101:propeller:104.99

104:fishing line:0.99

113:premium fish bait:1.00

106:cup holder:2.49

107:cooler:14.89

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

112:boat cover:120.00

109:transom:199.00

110:pulley:9.88

105:mirror:4.99

108:wheel:49.99

111:lock:31.00

102:trailer hitch:97.95

awk Example: output

Marine Parts R Us

Main catalog

Part-id name price

101 propeller 104.99

102 trailer hitch 97.95

103 sway bar 49.99

104 fishing line 0.99

105 mirror 4.99

106 cup holder 2.49

107 cooler 14.89

108 wheel 49.99

109 transom 199.00

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

110 pulley 9.88

111 lock 31.00

112 boat cover 120.00

113 premium fish bait 1.00

======================================

Catalog has 13 parts

awk Example: complete

BEGIN {

FS= ":"

print "Marine Parts R Us"

print "Main catalog"

print "Part-id\tname\t\t\t price"

print "======================================"
}

{
printf("%3d\t%-20s\t%6.2f\n", $1, $2, $3)

count++
}
END {
print "======================================"

print "Catalog has " count " parts"

}

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

APPLICATIONS

Awk control structures

 Conditional
if-else
 Repetition
for
 with counter
 with array index
while
do-while
also: break, continue

if Statement

Syntax:

if (conditional expression)

statement-1

else

statement-2

Example:

if ( NR < 3 )

print $2

else

print $3

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

for Loop

Syntax:

for (initialization; limit-test; update) statement

Example:

for (i = 1; i <= NR; i++)

total += $i
count++
}

for Loop for arrays

Syntax:

for (var in array) statement

Example:

for (x in deptSales)

print x, deptSales[x]

While Loop

Syntax:

while (logical expression) statement

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Example:

i=1

while (i <= NF)

print i, $i

i++
}

do-while Loop Syntax:

do

statement

while (condition)

 statement is executed at least once, even if condition is false at the beginning

Example:

i = 1

do {

print $0

i++

} while (i <= 10)

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

loop control statements

break

exits loop

continue

skips rest of current iteration, continues with next iteration

SHELL PROGRAMMING

The shell has similarities to the DOS command processor Command.com (actually Dos was
design as a poor copy of UNIX shell), it's actually much more powerful, really a programming
language in its own right.

A shell is always available on even the most basic UNIX installation. You have to go through the
shell to get other programs to run. You can write programs using the shell. You use the shell to
administrate your UNIX system. For example:

ls -al | more
is a short shell program to get a long listing of the present directory and route the output through
the more command.

What is a Shell?

A shell is a program that acts as the interface between you and the UNIX system, allowing
you to enter commands for the operating system to execute.

Here are some common shells.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Introduction- Working with Bourne Shell

 The Bourne shell, or sh, was the default Unix shell of Unix Version 7. It was developed
by Stephen Bourne, of AT&T Bell Laboratories.
 A Unix shell, also called "the command line", provides the traditional user interface for
the Unix operating system and for Unix-like systems. Users direct the operation of the
computer by entering command input as text for a shell to execute.
 There are many different shells in use. They are
 Bourne shell (sh)
 C shell (csh)
 Korn shell (ksh)
Bourne Again shell (bash)

 When we issue a command the shell is the first agency to acquire the information. It
accepts and interprets user requests. The shell examines &rebuilds the commands
&leaves the execution work to kernel. The kernel handles the h/w on behalf of these
commands &all processes in the system.
 The shell is generally sleeping. It wakes up when an input is keyed in at the prompt. This
input is actually input to the program that represents the shell.
Shell responsibilities
1. Program Execution
2. Variable and Filename Substitution
3. I/O Redirection
4. Pipeline Hookup
5. Environment Control
6. Interpreted Programming Language
1. Program Execution:
 The shell is responsible for the execution of all programs that you request from your
terminal.
 Each time you type in a line to the shell, the shell analyzes the line and the determines
what to do.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 The line that is typed to the shell is known more formally as the command line. The shell
scans this command line and determines the name of the program to be executed and what
arguments to pass to the program.
2. Variable and Filename Substitution:
 Like any other programming language, the shell lets you assign values to variables.
Whenever you specify one of these variables on the command line, preceded by adollar
sign, the shell substitutes the value assigned to the variable at that point.
3. I/O Redirection:
 It is the shell's responsibility to take care of input and output redirection on the command
line. It scans the command line for the occurrence of the special redirection characters <,
>, or >>.
4. Pipeline Hookup:
 Just as the shell scans the command line looking for redirection characters, it also looks
for the pipe character |. For each such character that it finds, it connects the standard
output from the command preceding the | to the standard input of the one following the|.
It then initiates execution of both programs.

5. Environment Control:

 The shell provides certain commands that let you customize your environment. Your
environment includes home directory, the characters that the shell displays to prompt you
to type in a command, and a list of the directories to be searched whenever you request
that a program be executed.

6. Interpreted Programming Language:

 The shell has its own built-in programming language. This language is interpreted,
meaning that the shell analyzes each statement in the language one line at a time and then
executes it. This differs from programming languages such as C and FORTRAN, in which
the programming statements are typically compiled into a machine-executable form before
they are executed.
 Programs developed in interpreted programming languages are typically easier to debug
and modify than compiled ones. However, they usually take much longer to execute the
their compiled equivalents.

Pipes and Redirection

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Pipes connect processes together. The input and output of UNIX programs can be redirected.

Redirecting Output

The > operator is used to redirect output of a program. For example: ls -l >

lsoutput.txt
redirects the output of the list command from the screen to the file lsoutput.txt.

To 0append to a file, use the >> operator.

ps >> lsoutput.txt

Redirecting Input

You redirect input by using the < operator. For

example: more < killout.txt

Pipes

We can connect processes together using the pipe operator ( | ). For example, the following
program means run the ps program, sort its output, and save it in the file pssort.out

ps | sort > pssort.out

The sort command will sort the list of words in a textfile into alphbetical order according to
the ASCII code set character order.

Here Documents
A here document is a special way of passing input to a command from a shell script. The
document starts and ends with the same leader after <<. For example:

#!/bin/sh

cat < this is a here

document
!FUNKY!

How It Works

It executes the here document as if it were input commands.

Running a Shell Script

You can type in a sequence of commands and allow the shell to execute them interactively,
or youu can sotre these commands in a file which you can invoke as a program.
Interactive Programs

A quick way of trying out small code fragments is to just type in the shell script on the command line.
Here is a shell program to compile only files that contain the string POSIX.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

The Shell as a Programming Language Creating a Script

To create a shell script first use a text editor to create a file containing the commands. For example, type the
following commands and save them as first.sh

Note: commands start with a #.

The line

#!/bin/sh
is special and tells the system to use the /bin/sh program to execute this program.

The command

exit 0
Causes the script program to exit and return a value of 0, which means there were not errors.

Making a Script Executable

There are two ways to execute the script. 1) invoke the shell with the name of the script file as a

parameter, thus:

/bin/sh first.sh

Or 2) change the mode of the script to executable and then after execute it by just
typing its name. chmod +x first.sh first.sh
Actually, you may need to type:
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

./first.sh
to make the file execute unles the path variable has your directory in it.

Shell Syntax

The modern UNIX shell can be used to write quite large, structured programs.

Shell metacharacters

The shell consists of large no. of metacharacters. These characters plays vital role in Unix programming.

Types of metacharacters:

1.File substitution

2. I/O redirection

3. Process execution

4. Quoting metacharacters

5. Positional parameters

6. Special characters

7. Command substitution

Filename substitution

These metacharacters are used to match the filenames in

adirectory. Metacharacter significance

* matches any no. of characters

? matches a single character

[ijk] matches a single character either i,j,k

[!ijk] matches a single character that is not an I,j,k

Shell Variables

Variables are generally created when you first use them. By default, all variables are considered and
Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

stored as strings. Variable names are case sensitive.

 U can define & use variables both in the command line and shell scripts. These variables
are called shell variables.
 No type declaration is necessary before u can use a shell variable.
 Variables provide the ability to store and manipulate the information with in the shell
program. The variables are completely under the control of user.

 Variables in Unix are of two types.

1.User-defined variables:

Generalized form:

variable=value.

Eg: $x=10

$echo $x

10

 To remove a variable use unset.

 $unset x
 All shell variables are initialized to null strings by default. To explicitly set null values
use

 x= or x=‘’ or x=“”

 To assign multiword strings to a variable use

 $msg=‘u have a mail’

Environment Variables

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

 They are initialized when the shell script starts and normally
capitalized to distinguish them from user-defined variables in scripts
 To display all variables in the local shell and their values, type the set command
 The unset command removes the variable from the current shell and subshell

Environment Variables Description

$HOME Home directory

$PATH List of directories to search for commands

$PS1 Command prompt

$PS2 Secondary prompt
$SHELL Current login shell
$0 Name of the shell script

$# No . of parameters passed

$$ Process ID of the shell script

Command substitution and Shell commands:

read:
 The read statement is a tool for taking input from the user i.e. making
scripts interactive. It is used with one or more variables. Input
supplied through the standard input is read into these variables.

$read name

What ever u entered is stored in the variable

name. printf:

Printf is used to print formatted

o/p. printf "format" arg1 arg2 ...

Eg:

$ printf "This is a number: %d\n" 10

This is a number: 10
$

Printf supports conversion specification characters like %d, %s ,%x

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

,%o…. Exit status of a command:

o Every command returns a value after execution .This value is called the exit
status or return value of a command.
o This value is said to be true if the command executes successfully and false if it fails.
o There is special parameter used by the shell it is the $?. It stores the exit
status of a command.

exit:

o The exit statement is used to prematurely terminate a program. When this statement
is encountered in a script, execution is halted and control is returned to the calling
program- in most cases the shell.
o U don’t need to place exit at the end of every shell script because the shell
knows when script execution is complete.

set:
 Set is used to produce the list of currently defined variables.

$set

 Set is used to assign values to the positional parameters.

$set welcome to Unix

The do-nothing( : )Command

 It is a null command.
 In some older shell scripts, colon was used at the start of a line to introduce a
comment, but modern scripts uses # now.
 expr:
 The expr command evaluates its arguments as an expression:
$ expr 8 + 6
$ x=`expr 12 / 4 `
$ echo $x
3

export:
There is a way to make the value of a variable known to a sub shell, and
that's by exporting it with the export command. The format of this
command is

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

export variables

where variables is the list of variable names that you want exported. For any sub shells
that get executed from that point on, the value of the exported variables will be passed
down to the sub shell.

eval:

eval scans the command line twice before executing it. General form for eval is eval

command-line

Eg:

$ cat last

eval echo \$$#

$ last one two three four four

${n}

If u supply more than nine arguments to a program, u cannot access the tenth and greater
arguments with $10, $11, and so on.

${n} must be used. So to directly access argument 10, you must write

${10}

Shift command:

The shift command allows u to effectively left shift your positional parameters. If u
execute the command

Shift

whatever was previously stored inside $2 will be assigned to $1, whatever was previously
stored in $3 will be assigned to $2, and so on. The old value of $1 will be irretrievably lost.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

The Environment-Environment Variables

It creates the variable salutation, displays its value, and some parameter variables.

 When a shell starts, some variables are initialized from values in the environment.
Here is a sample of some of them.

Parameter Variables
 If your script is invoked with parameters, some additional variables are created.

Quoting

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Normally, parameters are separated by white space, such as a space. Single quot marks can be
used to enclose values containing space(s). Type the following into a file called quot.sh

make sure to make it executable by typing the command:

< chmod a+x

quot.sh
The results of executing
the file is:

How It Works

The variable myvar is created and assigned the string Hi there. The content of the variable is
displyed using the echo $. Double quotes don't effect echoing the value. Single quotes and
backslash do.

The test, or []Command

Here is how to check for the existance of the file fred.c using the test and using the [] command.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

You can even place the then on the same line as the if, if youu add a semicolon before the word then.

There are arithmetic comparison.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

There are file conditions.

Control Structures

The shell has a set of control structures.

if
The if statement is vary similar other programming languages except it ends with a fi.
if condition
then else fi

statements

elif

the elif is better known as "else if". It replaces the else part of an if statement with another if
statement. You can try it out by using the following script.
#!/bin/sh

echo "Is it morning? Please answer yes or no" read

time of day

if [ $ti0meofday = "yes" ] then

echo "Good morning"
elif
[ $time of day = "no" ]; then echo
"Good afternoon"
else
echo "Sorry, $time of day not recognized. Enter yes
or no" exit 1 fi

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

exit 0

How It Works

The above does a second test on the variable timeofday if it isn't equal to yes.

A Problem with Variables

If a variable is set to null, the statement

looks like
if [ $timeofday = "yes" ] if [ = "yes" ]

which is illegal. This problem can be fixed by using double quotes around the variable name.
if [ "$timeofday" = "yes" ]
.

for

The for construct is used for looping through a range of values, which can be any set of strings.
The syntax is:

for variable in values do

statements
done
Try out the following script:

#!/bin/sh

for foo in bar fud 43 do

echo $foo
done
exit
0
When executed, the output should be:

bar
fud
0
43

How It Works

The above example creates the variable foo and assigns it a different value each time around the for loop.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

How It Works

Here is another script which uses the $(command) syntax to expand a list to chap3.txt,
chap4.txt, and chap5.txt and print the files.

#!/bin/sh

for file in $(ls chap[345].txt); do lpr

$file
done0

while

While loops will loop as long as some condition exist. OF course something in the body statements of
the loop should eventually change the condition and cause the loop to exit. Here is the while loop
syntax.
while condition do
statements
done
Here is a whil loop that loops 20 times. #!/bin/sh

foo=1

while [ "$foo" -le 20 ]

do done exit 0

How It Works

echo "Here we go again" foo=$(($foo+1))

The above script uses the [ ] command to test foo for <= the value 20. The line

foo=$(($fo0o+1))
increments the value of foo each time the loop executes..

until

The until statement loops until a condition becomes true! Its syntax is:

until condition do
statements
done
Here is a script using
until.
#!/bin/sh

until who | grep "$1" > /dev/null do

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Sl0eep 60
done

# now ring the bell and announce the expected user.

echo -e \\a
echo "**** $1 has just loogged in ****" exit 0

case

The case statement allows the testing of a variable for more then one value. The case statement ends with
the word esac. Its syntax is:

case variable in
pattern [ | pattern] ...) statements;; pattern [ |
pattern] ...) statements;;
...
esac
Here is a sample script using a case statement:
#!/bin/sh

echo "Is it morning? Please answer yes or no" read timeofday

case "$timeofday" in
"yes") echo "Good Morning";; "no" ) echo
"Good Afternoon";; 0"y" ) echo "Good
Morning";; "n"
) echo "Good Afternoon";;
* ) echo "Soory, answer not recognized";;
esac exit 0

The value in the varaible timeofday is compared to various strings. When a match is made, the associated
echo command is executed.

Here is a case where multiple strings are tested at a time, to do the some action. case

"$timeofday" in
"yes" | "y" | "yes" | "YES" ) echo "good Morning";; "n"* |
"N"* ) <echo "Good Afternoon";;
* ) < echo "Sorry, answer not recognized";;
0esac

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

How It Works

The above has sever strings tested for each possible statement.

Here is a case statement that executes multiple statements for each case.

case "$timeofday" in
"yes" | "y" | "Yes" | "YES" ) echo "Good
Morning"
echo "Up bright and early this morning"
;;

esac
echo "Good Afternoon"
[nN]*) ;;
echo "Sorry, answer not recognized" echo "Please answer yes or noo"

When a match is found to the variable value of timeofday, all the statements up to the ;; are executed.

Arithmetic in shell

The $((...)) is a better alternative to the expr command, which allows simple arithmetic
commands to be processed.

x=$(($x+1))

Parameter Expansion

Using { } around a variable to protect it against expansion. #!/bin/sh

for i in 1 2
do
my_secret_process ${i}_tmp
done

Here are some of the parameter expansion

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

How It Works

The try it out exercise uses parameter expansion to demonstrate how parameter expansion works.

Shell Script Examples

Example
#!/bin/sh

echo "Is it morning? (Answer yes or no)"

read timeofday

if [ $timeofday = "yes" ]; then

echo "Good Morning"

else

echo "Good afternoon"

fi

exit0

elif - Doing further Checks

#!/bin/sh

echo "Is it morning? Please answer yes or no" read

timeofday

if [ $timeofday = "yes" ]; then

echo "Good Morning"

elif [ $timeofday = "no" ]; then

echo "Good afternoon"

else echo "Wrong answer! Enter yes or no"

exit 1

fi exit 0

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Interrupt Processing-trap

The trap command is used for secifying the actions to take on receipt of signals. It syntax is:
Trap command signal Here are some of the signals.

How It Works

The try it out section has you type in a shell script to test the trap command. It creates a file and

keeps saying that it exists until you cause a control-C interrupt. It does it all again.

Functions

You can define functions in the shell. The syntax is:

function_name ()
{
statements
}0
Here is a sample function and its
execution. #!/bin/sh

foo()
{ echo "Function foo is executing"
}

echo “script
starting “foo echo “script
ended”

exit 0

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

How It Works

When the above script runs, it defines the funcion foo, then script echos script starting, then
it runs the functions foo which echos Function foo is executing, then it echo script ended.

Here is another sample script with a function in it. Save it as my_name

#!/bin/sh yes_or_no() {
echo "Parameters are $*"
while
true do
echo -n "Enter yes or no"
read x
0case "$x" in
y | yes ) return 0;; n
| no ) return 1;;
* )
echo "Answer yes or no"
esac
done
}

echo "Original parameters are

$*" if yes_or_no "IS your naem
$1" then
echo "Hi $1"
els
echo "Never mind"
e fi

0exit 0

How It Works

When my_name is execute with the statement:

my_name Rick and Neil

. gives the output of:
Original parameters are Rick and Neil
Parameters are Is your name Rick Enter
yes or no
no
Never mind

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Commands

You can execute normal command and built-in commands from a shell script. Built-in
commands are defined and only run inside of the script.

break

It is used to escape from an enclosing for, while or until loop before the controlling condition has been met.

The :Command

The colon command is a null command. It can be used for an alias for true..

Continue

The continue command makes the enclosing for, while, or until loop continue at the next iteration.

The Command

The dot command executes the command in the current shell:

. shell_script
echo

The echo command simply outputs a string to the standard output device followed by a newline character.

Eval

The eval command evaluates arguments and give s the results.

exec

The exec command can replace the current shell with a different program. It can also modify the
current file descriptors.

exit n

The exit command causes the script to exit with exit code n. An exit code of 0 means success.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

Here are some other codes.

export

The export command makes the variable named as its parameter available in subshells.

expr

The expr command evaluates its arguments as an expression.

0x = `expr $x + 1`
Here are some of its expression evaluations

printf

The printf command is only available in more recent shells. It works similar to the echo
command. Its general form is:

printf "format string" parameter1 parameter2 ...

Here are some characters and format specifiers.

Department of CSE
Linux Programming B.Tech IV Year II Sem (KR21)

return

The return command causes functions to return. It can have a value parameter which it returns.

set
The set command sets the parameter variables for the shell.

shift

The shift command moves all the parameters variables down by one, so $2 becomes $1, $3
becomes $2, and so on.

unset

The unset command removes variables or functions from the environment.

Command Execution

The result of $(command) is simply the output string from the command, which is then available to the script.

Department of CSE
Linux Programming B.Tech IV Year II Sem
(KR21)

Debugging Shell Scripts

When an error occurs in a script, the shell prints out the line number with an error. You can use
the set command to set various shell option. Here are some of them.

1. Enable Debugging Mode

Use built-in shell options to debug your script:
Run the script with debugging enabled
bash
CopyEdit
bash -x script.sh
 Displays each command and its arguments as they are executed.
Use debugging options within the script
 Add set -x to enable debugging and set +x to disable it.
bash
CopyEdit
#!/bin/bash
echo "Starting script..."
set -x # Enable debugging

Department of CSE
Linux Programming B.Tech IV Year II Sem
(KR21)
some_command
set +x # Disable debugging
echo "Script completed."
2. Use Echo Statements for Debugging
 Insert echo statements to check variable values at different points:
bash
CopyEdit
echo "Value of VAR: $VAR"
3. Use trap for Error Handling
 Capture signals and errors to execute custom debugging commands.
bash
CopyEdit
trap 'echo "Error at line $LINENO"; exit 1' ERR
4. Check for Syntax Errors
 Use bash -n to check for syntax issues without executing the script.
bash
CopyEdit
bash -n script.sh
5. Use set -e to Exit on Errors
 Stops the script if any command fails.
bash
CopyEdit
set -e
some_command # If this fails, the script stops here.
6. Debug Variable Expansion with declare -p
 Print variable values and attributes:
bash
CopyEdit
declare -p VAR_NAME

Department of CSE
Linux Programming B.Tech IV Year II Sem
(KR21)
7. Use ps4 for Detailed Debugging
 Customize debug output with PS4:
bash
CopyEdit
export PS4='+$BASH_SOURCE: $LINENO: '
set -x
8. Log Output for Later Analysis
 Redirect output to a file for review:
bash
CopyEdit
bash -x script.sh > debug.log 2>&1
9. Use shellcheck for Static Analysis
 Install and run shellcheck to detect potential issues.
bash
Copy Edit
shellcheck script.sh
10. Step Through with bash -v
 Prints each line before execution:
bash
CopyEdit
bash -v script.sh.

Department of CSE