Scribd
Upload
7 views6 pages

Training Control System Panel

The document outlines the wiring connections between various power supply components and Siemens devices, detailing cable sizes and termination points. It includes specifications for normal cables, terminal blocks, and connections for both AC and DC power supplies. Additionally, it describes the loop connections for 0VDC and 24VDC between Siemens controllers and terminal blocks.

Uploaded by

Steven
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
7 views6 pages

Training Control System Panel

The document outlines the wiring connections between various power supply components and Siemens devices, detailing cable sizes and termination points. It includes specifications for normal cables, terminal blocks, and connections for both AC and DC power supplies. Additionally, it describes the loop connections for 0VDC and 24VDC between Siemens controllers and terminal blocks.

Uploaded by

Steven
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

From To SLEEVE

Sr.No. Between Nodes CABLE SIZE CABLE DUCT


Device Term No. Device Term No. SOURCE DESTINATION LEGEND
CABINET POWER DISTRIBUTION Bottom Entry & Left entry AC SUPPLY-1.L/AC-CB1.1
1 Power SUPPLY TO INCOMING BREAKER 1 AC SUPPLY-1 L AC-CB1 1 2.5m2 Normal Cable AC SUPPLY-1.L/AC-CB1.1 1.AC-CB1/AC SUPPLY-1.L Top entry & Right Entry 1.AC-CB1/AC SUPPLY-1.L
Power SUPPLY TO INCOMING BREAKER 1 AC SUPPLY-1 N AC-CB1 2 2.5m2 Normal Cable AC SUPPLY-1.N/AC-CB1.2 AC-CB1.AC-CB1/AC SUPPLY-1.N
INCOMING BREAKER TO PSTOP POWER SUPPLY 3 L1
INCOMING BREAKER TO PSTOP POWER SUPPLY 4 L2
PSTOP POWER SUPPLY TO S71200 PLC L1
PSTOP POWER SUPPLY TO S71200 PLC L2
PSTOP (-ve) TO 0VDC TERMINAL BLOCK +ve
PSTOP (-ve) TO 0VDC TERMINAL BLOCK
PSTOP (-ve) TO 0VDC TERMINAL BLOCK
PSTOP (-ve) TO 0VDC TERMINAL BLOCK
PSTOP (-ve) TO 0VDC TERMINAL BLOCK
Terminal block to Siemens profibus module 4 L
Terminal block to Siemens profibus module 6 M
Terminal block to Siemens 1200 CPU 7 L
Terminal block to Siemens 1200 CPU 3 M
Terminal block to Siemens ET200SP CPU 5 L
Terminal block to Siemens ET200SP CPU 5 M
Terminal block to Siemens S7 300 (First) 4 L
Terminal block to Siemens S7 300 (First) 4 M
Terminal block to Siemens S7 300 (Second)
Terminal block to Siemens S7 300 (Second)
Terminal block to Siemens ET200 IO
Terminal block to Siemens ET200 IO
Terminal block to Siemens Ethernet Switch
Terminal block to Siemens Ethernet Switch
Terminal block to Siemens S7 400
Terminal block to Siemens S7 402
From To
Sr.No. Between Nodes
Device Term No. Device
CABINET IO TERM
1 UPS TO INCOMING BREAKER 1 AC SUPPLY-1 L AC-CB1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

27
28
29

31
32
33

34
35
To SLEEVE
CABLE SIZE CABLE DUCT
Term No. SOURCE
CABINET IO TERMINATION
4 2.5m2 Normal Cable AC SUPPLY-1.L/AC-CB1.4
SLEEVE
DESTINATION

AC SUPPLY-1.L/AC-CB1.4
Output TB

profibus
0vdc to siemens from 3terminal (counting from left) Siemens controller
24vdc to siemens from 3 rd terminal (counting from right)

Loop
0vdc from siemens (first 24vdc set) to 0vdc In siemens (second 24vdc set)

0vdc to siemens from 6terminal (counting from left)


24vdc to siemens from 4terminal (counting from left)

L1 to siemens from 3 rd terminal (counting from right)

Loop
L1 from first set to 2nd set of L1 pack

You might also like