Optek Datasheet
Uploaded by
redevilz.93Optek Datasheet
Uploaded by
redevilz.93TF16-EX-N
Dual Channel Scattered Light Sensor inline control
Inline real-time process monitoring
Designed for high temperatures,
high pressures and hazardous locations
Flameproof instrument comply to
EN/FM directives
Extremely low maintenance
CIP/SIP-compatible
Broad variety of line sizes,
process connections and wetted materials
The model TF16-EX-N is a precise dual channel, A precisely defined, constant light beam penetrates
scattered light turbidimeter. This sensor provides inline the process medium and will be scattered by particles
control solutions for a variety of industrial processes (trace suspended solids, undissolved liquids or gas
and is designed especially for hazardous environments. bubbles) in the medium.
The modular sensor consists of a flameproof stainless steel The scattered light is detected by photodiodes at an angle
lamp housing and an intrinsically safe detector module. of 11° and the unscattered light is detected simultaneously
The appropriate converter can be located either in a safe by a reference photo diode.
area or in a flameproof or pressurized enclosure directly The sensor can be calibrated in ppm, EBC or FTU and
in the hazardous location. measures extremely low particle sizes and concentrations.
The TF16-EX-N uses light in the Near Infrared (NIR) from A special optical sapphire window provides superior
730 to 970 nm. High particle concentrations can be moni- resistance to all abrasive and corrosive media.
tored color independent at the direct light detector. The TF16-EX-N is available with a broad variety of line
sizes, process connections and wetted materials.
Type TF16-EX-N 4 Detector (direct light)
1 Sensor body 5 Detector (scattered light)
2 Windows 6 Optics module with NIR filter
3 Optics module 7 Lamp
www.optek.com
Technical Data
Sensor TF16-EX-N
Material: Light source:
sensor body made of stainless steel incandescent tungsten lamp: 5.0 V DC, 775 mA,
SS 316 Ti, 1.4571 (standard) typical life span 3 to 5 years
Special materials: Wavelengths:
SS 316 L (1.4435), 1.4539, 1.4462, TFM 4215, Hastelloy® C4, 730 nm - 970 nm
Hastelloy® C22, Titanium, Tantalum, Monel® 400, Inconel® 625, Detector:
PP and others on request silicon photodiodes, hermetically sealed
Line size: Calibration:
¼“ to 8“, (DN 6 to DN 200) basic calibration in ppm (DE), FTU, EBC,
Process connections: Measuring range:
ASME Flange, DIN Flange, JIS Flange, Tri-Clamp, BBS-Clamp, 0-0.5 to 500 ppm (DE)
Female Thread NPT, Female Thread DIN ISO 228/1 G, 0-0.2 to 200 FTU
Sanitary Thread (DIN 11851), and others on request 0-0.05 to 50 EBC
Gaskets: 0-0.1 to 3.0 CU (absorption)
Viton®, EPDM (FDA), EPDM (USP Class VI), Kalrez®, Chemraz®, Resolution:
Fluoraz®, Buna (NBR), Silicone, Viton® /FEP (FDA), and others on < ± 0.05 % of respective measuring range
request.
Repeatability:
Windows: < ± 0.3 % of respective measuring range
Pyrex®, Sapphire
Linearity:
Optical path length: specific to application, < ± 1 % with standard solution
40 mm standard
Protection:
Process pressure: all optical parts protected according to IP65
10 mbar to 325 bar, (0.15 psi to 4713 psi),
depending on process connection, material and design Cable specification:
fixed cable connection 2 m, both side
Temperature specification: 0 - 400 m, (0 - 1312 ft.) appr. IIC T6/T5 (Groups A,B,C,D)
elevated or reduced ambient temperatures may require restrictions 401 - 1000 m, (1313 - 3280 ft) appr. IIB T6/T5 (Groups C,D)
to the operating temperatures
ambient temperature: Hazardous locations:
-30 °C to +40 °C, (-22 °F to +104 °F) for T4 (+135 °C /+275 °F) II 2G EEx ia IIC/IIB T6/T5
process temperature: Class I, Div. 1, Groups A, B, C, D
-30 °C to +120 °C, (-22 °F to +248 °F) Approval report:
periodic 15 min/day (no hazardous environment): DMT ATEX E176
-30 °C to +150 °C, (-22 °F to +392 °F) FMG J.I. 3013884
periodic 30 min/day (no hazardous environment): Certificates:
-30 °C to +140 °C, (-22 °F to +284 °F) ISO9001:2000, ATEX, FM, PED, CE, HP0
during transport:
-30 °C to +70 °C, (-22 °F to +158 °F)
Air purge:
connectors available as standard Use with converter C4000!
Options
TF16-EX-HT-N
high temperature flameproof model
perman.:
-30 °C to +240 °C, -22 °F to +464°F)
periodic 15 min/day:
-30 °C to +260 °C, (-22 °F to +500 °F)
periodic 30 min/day:
-30 °C to +250 °C, (-22 °F to +482 °F)
Measuring cells for any application
optek-Danulat GmbH optek-Danulat, Inc. optek-Danulat bv
1005-2016-0001-02
Emscherbruchallee 2 N 118 W 18748 Bunsen Drive Tiel, The Netherlands
45356 Essen, Germantown, WI 53022, USA E-Mail: [email protected]
Germany Phone: +1-262-437-3600
Phone: +49-(0)201-63409-0 Fax: +1-262-437-3699 optek-Danulat Pte. Ltd.
Fax: +49-(0)201-63409-999 Toll free: +1-800-371-4288 Singapore
www.optek.com E-Mail: [email protected] E-Mail: [email protected] E-Mail: [email protected]
