Choose your region

United Kingdom
Finland
Estonia
Italy
France
Sweden
Rest of Europe

Processes

Cutting & Bending

Laser Cutting Tube Laser Cutting Plasma Cutting Flame Cutting Waterjet Cutting Metal Punching Metal Bending

CNC Machining

CNC Milling CNC Turning CNC Machining

Finishing & Assembly

Welding & Assembly Heat & Surface Treatment

High-Volume Production

Metal Casting

Knowledge Base

Knowledge Base

Engineering Blog CAD Design Tips

About Service

About Service

Case Studies Our Industries Quality Assurance Available Materials FAQ

Policies & Terms

Cancellation & Returns Terms & Conditions Privacy Policy

About Us

About Us

Company & Team Careers Fractory in Media Contacts

+443308221111 [email protected]
EN

ENfietITFRSV

Log in

Processes

Cutting & Bending

Laser Cutting Tube Laser Cutting Plasma Cutting Flame Cutting Waterjet Cutting Metal Punching Metal Bending

CNC Machining

CNC Milling CNC Turning CNC Machining

Finishing & Assembly

Welding & Assembly Heat & Surface Treatment

High-Volume Production

Metal Casting
Knowledge Base

Knowledge Base

Engineering Blog CAD Design Tips

About Service

About Service

Case Studies Our Industries Quality Assurance Available Materials FAQ

Policies & Terms

Cancellation & Returns Terms & Conditions Privacy Policy

About Us

About Us

Company & Team Careers Fractory in Media Contacts

Log in
+443308221111 [email protected]

ENfietITFRSV
03.06.2020 by Andreas Velling

Stress-Strain Curve

The stress-strain curve is one of the first material strength graphs we come across when starting on the journey to study materials.

While it is actually not that difficult, it may look a bit daunting at first. In this article, we shall learn about the stress and strain curve to understand it better.

But before we get there, we will try to explain a few key concepts for better comprehension.
 Table of Contents [ hide ]
I Loading
II What Is Stress?
III What Is Strain?
IV Stress and Strain
V How Is a Stress-Strain Curve Plotted?
VI Stress-Strain Curve
VII Hooke’s Law
VIII Proportional Limit
IX Young’s Modulus of Elasticity
X Elastic Point & Yield Point
XI Plastic Behaviour
XII Why Is the Strain-Stress Curve Important?

Loading
A metal in service or during manufacturing is subjected to different forces. Depending on the magnitude of these forces, the metal may or may not change its shape.

The act of applying the force is known as loading. There are five different ways in which these forces may be applied on a metal part.

The five forms of loading are:

1. Compression
2. Tension
3. Shear
4. Torsion
5. Bending

Metals are elastic in nature up to a certain extent. When subjected to loading, the metal undergoes deformation but it may be too small to discern without special
tools.

When this applied force is removed, the metal regains its original dimensions (unless the force exceeds a certain point). Just like a balloon, for example, regains its
original shape after a force is removed after application.

What Is Stress?
Stress is defined as the ratio of the applied force to the cross-sectional area of the material it is applied to.

The formula for calculating material stress:

σ=F/A, where

F is force (N)

A is area (m2)

σ is stress (N/m2 or Pa)

For example, a force of 1 N applied on a cross-sectional area of 1 m2, will be calculated as a stress of 1 N/m2 or 1 Pa. The unit can be displayed as N/m2 or Pa, both
of which represent pressure.

Stress can be understood as an internal force induced in the metal in response to an externally applied force. It will try to resist any change in dimension caused by
the external force.

When the cross-sectional area changes, the same force will induce greater or smaller stresses in the metal. A smaller cross-sectional area will result in a larger stress
value and vice versa.

What Is Strain?
Strain is defined as the ratio of the change in dimension to the initial dimension of the metal. It does not have a unit.

There are three types of strain: normal, volumetric, and shear.

Normal strain (or longitudinal strain) concerns itself with the change in only one dimension, say length for example.

The formula for calculating strain is:

ε=(l-l0)/l0, where

l0 is starting or initial length (mm)

l is stretched length (mm)

For example, if a certain force changes a metal’s length from 100 mm to 101 mm, the normal strain will be (101-100)/100 or 0.01.

Normal strain may be positive or negative depending on the external force’s directions and therefore effect on the original length.

For the sake of simplicity, we shall only talk about normal strain in our article. Thus, every time we use the word strain, it will refer to normal strain. Once we
understand normal strain, it is easy to extend the same understanding to the other two.

Stress and Strain

Whenever a load acts on a body, it produces stress as well as strain in the material.

Let’s use a football as an example. When you try to squeeze it, it offers resistance. The resistance offered is the induced stress while the change in dimension
represents the strain.

Strain causes stress. When applying force that leads to deformation, a material tries to retain its body structure by setting up internal stresses.

How Is a Stress-Strain Curve Plotted?

The most common method for plotting a stress and strain curve is to subject a rod of the test piece to a tensile test.

This is done using a Universal Testing Machine. It has two claws that hold the two extremes of the rod and pull it at a uniform rate.

The force applied and the strain produced is recorded until a fracture occurs. The two parameters are then plotted on an X-Y graph to get the familiar graph.

Stress-Strain Curve

The stress-strain curve is a graph that shows the change in stress as strain increases. It is a widely used reference graph for metals in material science and
manufacturing.

There are various sections on the stress and strain curve that describe different behaviour of a ductile material depending on the amount of stress induced.
 Tensile test

Stress and strain curves for brittle, hard (but not ductile) and plastic materials are different. The curve for these materials is simpler and can be learned very easily.
We shall focus on the stress-strain curve of ductile materials. But before we delve deeper into that, let’s take a look at another important concept – Hooke’s law.

Hooke’s Law
This principle of physics talks about elasticity and how the force required to extend or compress an elastic object by a certain distance is proportional to that distance.
More force produces more distance.

Hooke’s law formula for calculating the force in springs:

In the case of metals, Hooke’s law dictates that for most metals, greater changes in length will create greater internal forces. That means stress is directly
proportional to strain. This is because metals exhibit elasticity up to a certain limit.

In simple words, if the tensile/compressive load is doubled, the increase/decrease in length will also double as long as the metal is within the proportional limit.

Scale Your Manufacturing from Prototyping to Series

Personal account manager
Quality assurance
Payment terms for companies
 On-time delivery by Fractory

Get a quote
Proportional Limit
Almost all metals behave like elastic objects over a specific range. This range varies for different metals and is affected by factors such as mechanical properties,
atmospheric exposure (corrosion), grain size, heat treatment, and working temperature.

When the testing machine starts pulling on the test piece, it undergoes tensile stress. Initially, the material follows Hooke’s law.

The strain will be proportional to stress. It means that the ratio of stress to strain will is a constant. In material science, this constant is known as Young’s modulus of
elasticity and is one of the most important mechanical properties to consider when choosing the right material for an application.

There is no permanent deformation either. The metal will behave like a spring and return to its original dimension on the removal of load.

The point up to which this proportional behaviour is observed is known as the proportional limit. With increasing stress, strain increases linearly. In the diagram
above, this rule applies up until the yields strength indicator.

Young’s Modulus of Elasticity

It is defined as the ratio of longitudinal stress to strain within the proportional limit of a material. Also known as the modulus of resilience, it is analogous to the
stiffness of a spring. That’s also why Hooke’s law includes a spring constant.

Let’s say we have 2 materials with the same length and cross-section. To change the dimensions in equal measure, the material with a higher Young’s modulus value
requires greater force.

Elastic Point & Yield Point

As the test piece is subjected to increasing amounts of tensile force, stresses increase beyond the proportional limit.

The stress-strain relationship deviates from Hooke’s law. The strain increases at a faster rate than stress which manifests itself as a mild flattening of the curve in the
stress and strain graph.

This is the part of the graph where the first curve starts but has not yet taken a turn downwards. Although the proportionality of stress to strain is lost, the property of
elasticity isn’t, and on the removal of load, the metal will still return to its original dimensions.

The change in dimension within the elastic limit is thus temporary and reversible. The elastic limit of a material ascertains its stability under stress.

Here lies the reason why engineering calculations use a material’s yield strength for determining its ability to resist a load. If the load is greater than the yield
strength, the result will be unwanted plastic deformation.

Plastic Behaviour
When the test piece is pulled further on the testing machine, the property of elasticity is lost. This aligns with the start of the strain hardening region in the stress-
strain graph.

The yield strength point is where the plastic deformation of the material is first observed. If the material is unclamped from the testing machine beyond this point, it
will not return to its original length.

Strain hardening is said to occur when the number of dislocations in the material becomes too high and they start to obstruct each other’s movement. The material
constantly rearranges itself and tends to harden.

Necking
The plastic deformation continues to occur with increasing stress. In due time, a narrowing of the cross-section will be observed at a point on the rod. This
phenomenon is known as necking. The stress is so high that it leads to the formation of a neck at the weakest point of the rod. You can see this happen in the video
above.

The stress-strain curve also shows the region where necking occurs. Its starting point also gives us the ultimate tensile strength of a material.

Ultimate tensile strength shows the maximum amount of stress a material can handle. Reaching this value pushes the material towards failure and breaking.

Fracture

Once in the necking region, we can see that the load does not have to increase for further plastic deformation.

A fracture will occur at the neck usually with a cup and cone shape formation at either end of the rod. This point is known as the fracture or rupture point and is
denoted by E on the stress and strain graph.

Why Is the Strain-Stress Curve Important?

The stress-strain curve provides design engineers with a long list of important parameters needed for application design. A stress-strain graph gives us many
mechanical properties such as strength, toughness, elasticity, yield point, strain energy, resilience, and elongation during load.

It also helps in fabrication. Whether you are looking to perform extrusion, rolling, bending or some other operation, the values stemming from this graph will help
you to determine the forces necessary to induce plastic deformation.
Search
Search from posts Search
Newsletter

Would you like to read more of our content?

Receive engineering articles to your inbox monthly.

Enter your email

Subscribe to newsletter

Categories

Tolerances
CAD-CAM
Machine Components
Product Updates
Project Management
Learn from Engineers
Fabrication Methods
Engineering Materials
Product design
Company News
Welding
Procurement
Casting
Supply Chain
Let us ease your workload! Order metal fabrication from Fractory and experience the benefits yourself: 1-1 engineering support, payment terms for
companies, a single point of contact, competitive pricing, on-time deliveries and quality control.
Get a Quote

Contact

Fractory Ltd, Suite 4.13, Department Bonded Warehouse, 18 Lower Byrom Street, Manchester, M3 4AP
+443308221111
[email protected]

NextGenerationEU EAS Grant

Capabilities

Laser Cutting
Plasma Cutting
Flame Cutting
Waterjet Cutting
Tube Laser Cutting
CNC Machining
CNC Milling
CNC Turning
Metal Bending
Welding & Assembly
Heat & Surface Treatment
Metal Casting
Materials

Knowledge base

CAD Design Tips

Engineering Blog
Case Studies
 Media
FAQ
Privacy Policy
Terms & Conditions
Cancellation & Returns Policy

About

Quality
About Us
Our Industries
Careers
Become a Supplier
Contacts

Social

Facebook
LinkedIn

Fractory’s bending calculator helps you to get your sheet metal designs right from the start.

Enter your email

Sign me up for a newsletter too

Get your calculator link