FusionModule Series FusionModule2000 Smart Modular Data Center

FusionModule2000 6.0
Smart Modular Data Center Solution
INTRODUCTION
Huawei FusionModule2000 is a new generation smart modular data center solution, which
dedicated to providing customers with simple, efficient, and reliable data center solutions.
It's a modular-designed, highly integrated solution which comprises power supply, cooling,
rack & structure, cabling and management system within a module, meeting the requirements
for quick delivery and on-demand deployment.
Furthermore, the Huawei smart module uses the i3 intelligent management to
comprehensively improve the reliability and efficiency of power supply and cooling system.
This significantly improves data center availability and O&M efficiency.

APPLICATION SCENARIOS
• The FusionModule2000 uses an air-cooled cooling system and is mainly applicable to small-
and medium-sized data centers. The solution features simple design and high building
adaptability, lowering the requirements of room height and reconstruction. It meets the data
center deployment requirements of various sectors such as enterprise headquarters and
large branches, bank headquarters and secondary branches, governments, carriers,
education, and healthcare.

FEATURES
Simple
• Modular design, one module one DC, on-demand deployment and flexible expansion
• Integrated design, low floor height requirements, small footprint
Green
• iCooling intelligent optimization*, reducing the energy consumption of cooling system
up to 20%
• Wet film humidification*: Compared with traditional electrode humidifiers, wet film
humidifiers reduce energy consumption by 95%
• Industry's first air-cooled smart modular DC PUE test and certification, the annual
average PUE is as low as 1.111 @Beijing
Smart
• iManager: Space, Power, Cooling (SPC) visualization, automatic asset management
simplified O&M
• 3D view* clear display of key information and alarms about power distribution and
cooling system, automatic management of assets*, automatic asset tracking, and no
manual counting
• Local 43-inch smart screen * intuitive display of intelligent features,
simplifying O&M
Reliable
• iPower: Visualization of power supply chain, fault auto-locating and auto
shutdown for proactive protection
• Innovative intelligent refrigerant leakage detection prevents cooling capacity decrease
or air conditioner breakdown *Optional Features
• Innovative continuous cooling architecture *, preventing cooling shutdown caused by
mains interruption
FusionModule Series FusionModule2000 Smart Modular Data Center

SPECIFICATIONS

Item Specifications
Dual row (with aisle containment) (L×W×H): L×3600×H，H≤2460mm; L×3400×H，H≤2460mm; L×3600×H，
Dimensions H≤2660mm

Cabinets per module Single row≤24 cabinets; dual row: ≤48 cabinets

Power supply 380/400/415VAC, 50/60Hz, 3Ph+N+PE

180kW (with integrated UPS)/ 145kW (with integrated PDC)/ 310kW (with New main way)/ 310kW (with
Max IT load per module precision PDC)

Ultra low temperature condition: -40ºC to 45ºC(Need low-temp kit)

Micro Module Operation condition T1 condition: -20ºC to 45ºC; T3 condition: -5ºC to 55ºC(Need T3 outdoor unit)

Cable routing Routed in/out through the top of cabinets

Installation Installing on concrete floor or raised floor

2000mm×600/800mm×1200mm; 2000mm×600mm×1100mm;
Dimensions (H×W×D) 2200mm×600/800mm×1200mm

Space available 42U/47U

Cabinet Cabinet Porosity Front and rear doors: hexagonal mesh door design, porosity rate ≥ 75%
Protection level IP20
Cooling capacity 25kW/35kW/46kW/65kW

25kW:2000mm×300mm×1100mm;
Dimensions (H×W×D) 35kW:2000mm×300mm×1200mm;
Air-cooled In-row air 46kW/65kW:2000mm×600mm×1200mm；
conditioner
Power supply 380/400/415VAC, 50/60Hz, 3Ph+N+PE

Refrigerant R410A
Input voltage 380/400/415VAC, 50/60Hz, 3Ph+N+PE
Input 250A/400A/630A MCCB (single input); 250A/400A ATS (dual input)
Input power factor Full load > 0.99, Half load > 0.98
Output power factor 1.0
Rated capacity 30~180kVA
Integrated UPS
Output IT: 40A/1P×24×2; A/C: 40A or 63A/3P×8; lighting: 10A/1P×3
(UPS inside)
Efficiency ≥ 96% (Linear Load)
AC SPD 5kA, 8/20μs
Input voltage 380/400/415VAC, 50/60Hz, 3Ph+N+PE

Input IT: 160A/250A MCCB; A/C: 160A/250A MCCB (single/dual input)

Integrated power Rated input current IT: 160A/250A, Air conditioner: 160A/250A
distribution cabinet
(UPS outside) Output IT: 2×24×40A/1P; 2×24×63A/1P;2×8×40A/3P;A/C: 40A/3P×8 or 63A/3P×8 ; lighting: 10A/1P×3

AC SPD 20kA, 8/20μs

Input voltage 380/400/415VAC, 50/60Hz,3Ph+N+PE

Precision power
distribution cabinet Input 160A/250A/400A/630A MCCB (single/dual input)
(UPS outside)
Output IT：40A/1P,63A/1P,40A/3P,63A/3P, max 144 routes

Input voltage 380/400/415VAC, 50/60Hz,3Ph+N+PE

Smart busway Input 250A/400A/630A MCCB (single input)

(UPSoutside) Output IT：40/1P，63A/1P，40A/3P，63A/3P (6 branches in one Power Distribution Unit)
FusionModule Series FusionModule2000 Smart Modular Data Center

Innovative architecture—Cooling uninterrupted

Traditional architecture New Architecture

AC AC
Bypass
Bypass Smart
PDU
AC/DC DC/AC
AC/DC DC/AC
IT IT
Bat
Bat

Recommended Configurations—UPS Inside the Module

Smart Cooling

Smart Cooling

Smart Cooling
IT IT IT IT IT IT IT IT IT IT IT IT

Aisle Containment
Integrated UPS

Smart Cooling

Smart Cooling
IT IT IT IT IT IT IT IT IT IT IT IT

UPS Inside the Module(Integrated UPS) R24 Typical Layout

IT Load (kW) IT Power Supply AC Power Supply Redundancy A/C Configuration

30 25kW×2

40 25kW×3

60 35kW×3

80 35kW×4
Integrated UPS Integrated UPS N+ 1/ 2N
100 46kW×4

125 65kW×4

150 65kW×4

180 65kW×5
FusionModule Series FusionModule2000 Smart Modular Data Center

Recommended Configurations——UPS Outside the Module

UPS Outside the Module(Integrated PDC) UPS Outside the Module(Smart Busway)
Smart Cooling
Smart Cooling

Smart Cooling

Smart Cooling
Smart Cooling

Smart Cooling
IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT

R24-140kW R24-140kW
(aisle) (aisle)
Integrated PDC

Smart Cooling
Smart Cooling

Smart Cooling

Smart Cooling
Smart Cooling

Smart Cooling
IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT IT

R24 Typical Layout of Dual-Row (Precision PDC) R24 Typical Layout of Dual-Row (Smart Busway)

IT Load (kW) IT Power Supply AC Power Supply Redundancy AC Configuration

20 25kW×2

30 35kW×2

40 25kW×3
Integrated PDC/ Integrated PDC/ Power
60 35kW×3
Precision Distribution Box
90 PDC/Smart Busway 35kW×4

120 46kW×4

145 65kW×4

160 Smart Power Distribution N+1/2N 65kW×4

Busway/Precision Box
235 65kW×6
PDC
310 65kW×7

Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.