Tadano Model Gr800Xl-1 - 80 Ton Capacity: Lifting Charts - Rough Terrain Cranes

LIFTING CHARTS - Rough Terrain Cranes
TADANO MODEL GR800XL-1 - 80 TON CAPACITY
DIMENSIONS
23' 7-1/2"(7200)
21' 11-3/4"(6700)
18' 1/2"(5500)
9' 2-1/4"(2800)
"
1/4
' 6- 0)
13 (412
46' 8-1/4" (14230)
(11500 ~ 44000)
Min. 37' 8-3/4" ~ Max. 144' 4-1/4"
14.4
17.6 o
11' 4-1/2" (3470)
12' 5-1/2" (3800)
6' 7/8"(1850)
6' 1-7/8"(1875)
6' 7-3/4"(2025)
12' 11-1/2"(3950)
23' 7-1/3" (7200)
7' 10-1/2"(2400)
GENERAL DIMENSIONS
(29.5 X 25 Tires)
Turning radius
4 wheel steer
2 wheel steer
Feet
Meters
21' 11-3/4"
39' 1/2"
6.7
11.9
8' 2-1/2" (2502)

10' 10-1/2" (3315)
Specifications are subject to change without notice
GR800XL-1
SUPERSTRUCTURE SPECIFICATIONS
BOOM
Five section full power synchronized telescoping boom,
37.7'~144.4'(11.5m~44.0m), of round hexagonal box
construction with 7 sheaves, 15" (0.38m) root diameter, at boom
head. The synchronization system consists of two telescope
cylinders, an extension cable and retraction cable. Hydraulic cylinder
fitted with holding valve. Two easily removable wire rope guards,
rope dead end provided on both sides of boom head. Boom
telescope sections are supported by wear pads both vertically and
horizontally.
Extension speed 106' 7-1/2" in 145 seconds.
BOOM ELEVATION - By a double acting hydraulic cylinder
with holding valve. Elevation -2.0o~80.7o, combination controls for
hand or foot operation. Boom angle indicator.
Automatic speed reduction and soft stop function.
Elevation speed -2.0o~80.7o in 77 seconds.
JIB - Two stage bi-fold lattice type with 3.5o, 25o or 45o offset
(tilt type). Single sheave, 15-5/8"(0.396m) root diameter, at the
head of both jib sections. Stored alongside base boom section.
Jib length is 32.5' (9.9m) or 58.1' (17.7m). Assist cylinders for
mounting and stowing are controlled at right side of superstructure.
Self stowing jib mounting pins.
AUXILIARY LIFTING SHEAVE (SINGLE TOP)
Single sheave, 15-5/8"(0.396m) root diameter. Mounted to main
boom head for single line work (stowable).
ANTI-TWO BLOCK - Pendant type over-winding cut out
device with audio-visual (FAILURE lamp/BUZZER) warning
system.
SWING
Hydraulic axial piston motor driven through planetary swing
speed reducer. Continuous 360o full circle swing on ball bearing
turntable at 2.3rpm. Equipped with manually locked/released
swing brake. A 360o positive swing lock for pick and carry and
travel modes, manually engaged in cab. Twin swing System:
Free swing or lock swing controlled by selector switch on front
console.
HOIST
MAIN HOIST - Variable speed type with grooved drum
driven by hydraulic axial piston motor through winch speed
reducer. Power load lowering and raising. Equipped with
automatic brake (neutral brake) and counterbalance valve.
Controlled independently of main hoist. Equipped with cable
follower and drum rotation indicator.
DRUM - Grooved 15-3/4"(0.40m) root diameter x 22-3/4"

(0.578m) wide. Wire rope: 436' of 3/4"diameter rope (133m of
19mm). Drum capacity: 1,096' (334m) 7 layers. Maximum line
pull (available): 18,200lbs. (8,260kg). Maximum line speed:
585FPM (178m/min).
WIRE ROPE - Warrington seal wire, extra improved plow steel,
preformed, independent wire rope core, right regular lay.
3/4"(19 mm) 6X37 class
HOOK BLOCKS
6.2 ton (5.6 metric ton) - Weighted hook with swivel and
safety latch, for 3/4"(19mm) wire rope.
HYDRAULIC SYSTEM
PUMPS - Two variable piston pumps for crane functions.
Tandem gear pump for steering, swing and optional equipment.
Powered by carrier engine. Pump disconnect for crane is
engaged/ disengaged by rotary switch from operator's cab.
CONTROL VALVES - Multiple valves actuated by pilot
pressure with integral pressure relief valves.
RESERVOIR - 195 gallon (740 lit.) capacity. External sight
level gauge.
FILTRATION - 26 micron return filter, full flow with bypass
protection, located inside of hydraulic reservoir. Accessible for
easy replacement.
OIL COOLER - Air cooled fan type.
CAB AND CONTROLS
Both crane and drive operations can be performed from one
cab mounted on rotating superstructure.
Left side, 1 man type, steel construction with sliding door
access and tinted safety glass windows opening at side. Door
window is powered control. Windshield glass and roof window
glass window are shatter-resistant. Tilt-telescoping steering
wheel. Adjustable control lever stands for swing, boom hoist,
boom telescoping, auxiliary hoist and main hoist. Control lever
stands can change neutral positions and tilt for easy access into
cab. 3 way adjustable operator's seat with high back, headrest
and armrest. Engine throttle knob. Foot operated controls: boom
hoist, boom telescoping, service brake and engine throttle. Hot
water cab heater and air conditioning (OPTIONAL).
DRUM - Grooved 15-3/4"(0.40m) root diameter x 22-3/4"

(0.578m) wide. Wire rope: 797' of 3/4"diameter rope (243m of
19mm). Drum capacity: 1,096' (334m) 7 layers. Maximum line
pull (available): 18,200lbs. (8,260kg). Maximum line speed:
585FPM (178m/min).
Dash-mounted engine start/stop, monitor lamps, cigarette lighter

ashtray, drive selector switch, parking brake switch, steering
mode select switch, power window switch, pump engaged/
disengaged switch, swing brake switch, telescoping/auxiliary
winch select switch, outrigger controls, main winch/auxiliary
winch selector switch, swing stop cancel switch, slow elevation
stop cancel switch and free swing / lock swing selector switch.
AUXILIARY HOIST - Variable speed type with grooved drum

driven by hydraulic axial piston motor through winch speed
reducer. Power load lowering and raising. Equipped with
automatic brake (neutral brake) and counterbalance valve.
Controlled independently of main hoist. Equipped with cable
follower and drum rotation indicator.
Instruments - Torque converter oil temperature, engine water

temperature, air pressure, fuel, speedometer, tachometer and
hour meter. Hydraulic oil pressure is monitored and displayed
on the AML-L display panel.
GR800XL-1
Tadano electronic LOAD MOMENT INDICATOR system

(AML-L) including:
Control lever lockout function with audible and visual
pre-warning.
Boom position indicator
Outrigger state indicator
Boom angle / boom length / jib offset angle / load
radius / rated lifting capacities / actual loads read out
Ratio of actual load moment to rated load moment
indication
Automatic Speed Reduction and Soft Stop function
on boom elevation and swing (swing range restricted only)
Working condition register switch
Load radius / boom angle / tip height / swing range
preset function
External warning lamp
TADANO AML-L monitors outrigger extended length and

automatically programs the corresponding "RATED LIFTING
CAPACITIES" table.
Operator's right hand console includes transmission gear
selector and sight level bubble. Upper console includes
working light switch, roof washer and wiper switch, oil
cooler switch, emergency outrigger set up key switch,
drum indicator switch, jib equipped/removed select switch,
boom emergency telescoping switch (2nd and 3rd-top)
and air conditioning control switch. Swing lock lever.
NOTE:Each crane motion speed is based on unladen
conditions.
CARRIER SPECIFICATIONS
TYPE - Rear engine, left hand steering, driving axle 2-way
selected type by manual switch, 4x2 front drive, 4x4 front and
rear drive.
FRAME - High tensile steel, all welded mono-box construction.
TRANSMISSION - Electronically controlled full automatic
transmission. Torque converter driving full powershift with
driving axle selector. 6 forward and 2 reverse speeds, constant
mesh.
3 speeds - high range - 2 wheel drive; 4 wheel drive
3 speeds - low range - 4 wheel drive
TRAVEL SPEED - 25 mph (40 km/h)
AXLE - Front: Full floating type, steering and driving axle with
planetary reduction. Rear: Full floating type, steering and driving
axle with planetary reduction and non-spin rear differential.
STEERING- Hydraulic power steering controlled by steering
wheel. Four steering modes available: 2 wheel front, 2 wheel
rear, 4 wheel coordinated and 4 wheel crab .
SUSPENSION - Front: Rigid mounted to frame. Rear: Pivot

mounted with hydraulic lockout device.
BRAKE SYSTEMS - Service: Air over hydraulic disc brakes on
all 4 wheels. Parking/Emergency: Spring applied-air released
brake acting on input shaft of front axle. Auxiliary: Electropneumatic operated exhaust brake.
TIRES - 29.5-25 22PR(OR)
OUTRIGGERS - Four hydraulic, beam and jack outriggers.
Vertical jack cylinders equipped with integral holding valve. Each
outrigger beam and jack is controlled independently from cab.
Beams extend to 23' 7-1/2" (7.2 m) center-line and retract to
within 10' 10-1/2" (3.315 m) overall width with floats. Outrigger
jack floats are attached thus eliminating the need of manually
attaching and detaching them. Controls and sight bubble located
in superstructure cab. Four outrigger extension lengths are
provided with corresponding "RATED LIFTING CAPACITIES" for
crane duty in confined areas.
Min. Extension
9' 2-1/4" center to center
Mid. Extension 18' 1/2" center to center
Mid. Extension 21' 11-3/4" center to center
Max. Extension 23' 7-1/2" center to center
Float size(Diameter) 1' 7-11/16" (0.5m)
ENGINE
Model
Type
No. of cylinders
Combustion
BoreXStroke, in.(mm)
Displacement, cu. in (liters)
Air inlet heater
Air cleaner
Oil filter
Fuel filter
Fuel tank, gal.(liters)
Cooling
GR800XL-1
Mitsubishi 6D16-TLEE
Direct injection diesel
6
4 cycle, turbo charged and after cooled
4.646 X 4.528 (118X115)
460 (7.545)
24 volt preheat
Dry type, replaceable element
Full flow with replaceable element
Full flow with replaceable element
79.2 (300), right side of carrier
Liquid pressurized, recirculating by-pass
Radiator
Fan, in.(mm)
Starting
Charging
Battery
Compressor, air, CFM(l /min)
Horsepower (kW)
Torque, Max. ft-lb (kgm)
Capacity, gal.(liters)
Cooling water
Lubrication
Fuel
Fin and tube core, thermostat controlled

Suction type, 6-blade, 23.6 (600) dia.
24 volt
24 volt system, negative ground
2-120 amp. Hour
9.2 CFM (260) at 2,800rpm
Gross 223 (166) at 2,700rpm
521 (72) at 1,300rpm
3.4 (13)
3.7 ~ 4.2 (14 ~ 16)
79.2 (300)
STANDARD EQUIPMENT
- Four section full power partially synchronized boom
37.7'~144.4' (11.5 m~44.0 m)
- 32.5'~58.1' (9.9 m~17.7 m) bi-fold lattice jib (tilt type)
with 3.5o, 25o or 45o pinned offsets and self storing pins.
- Auxiliary lifting sheave (single top) stowable
- Variable speed main hoist with grooved drum, cable follower
and 797' of 3/4" cable.
- Variable speed auxiliary hoist with grooved drum, cable
follower and 436' of 3/4" cable.
- Drum rotation indicator (thumper type) main and auxiliary hoist
- Anti-Two block device (overwind cutout)
- Boom angle indicator
- Tadano electronic load moment indicator system (AML-L)
- Outrigger extension length detector
- Electronic crane monitoring system
- Tadano twin swing system and 360o positive swing lock
- Self centering finger control levers with pilot control
- Control pedals for boom hoist and boom telescoping
- 3 way adjustable cloth seat with armrests, high back
and seat belt
- Tilt-telescoping steering wheel
- Tinted safety glass and sun visor
- Front windshield wiper and washer
- Roof window wiper and washer
- Power window (cab door)
- Rear view mirrors (right and left side)
- Mirror for main and auxiliary hoists
- Cigarette lighter and ashtray
- Electric fan in cab
- Cab floor mat
- Pump disconnect in operator's cab
- Hydraulic oil cooler
Independently controlled outriggers

Four outrigger extension positions
Self-storing outrigger pads
Outrigger hose protection
Mitsubishi 6D16-TLEE turbo charged after cooled engine
(223HP) with exhaust brake
- Electronic controlled automatic transmission driven by torque
converter
- 4 X 4 X 4 drive/steer
- Non-spin rear differential
- Automatic rear axle oscillation lockout system
- 29.5-25 22PR (OR) tires
- Disc brakes
- Fenders
- Air dryer
- Water separator with filter
- Engine over-run alarm
- Back-up alarm
- Low oil pressure/high water temp. warning device (visual)
- Rear steer centering light
- Air cleaner dust indicator
- Full instrumentation package
- Complete highway light package
- Flood lights and work lights
- Tool storage compartment
- Tire inflation kit
- 24 volt electric system
- 6.2 ton (5.6 metric ton) hook with swivel
- Towing hooks-Front and rear
- Lifting eyes
- Hook block tie down (front bumper)
- Weighted hook storage compartment
OPTIONAL EQUIPMENT
- 80 ton (72.6 metric ton) - 7 sheave with swivel hook and
safety latch for 3/4"(19 mm) wire rope
- 50 ton (45.4 metric ton) - 4 sheave with swivel hook and
safety latch for 3/4"(19 mm) wire rope
- Hot water cab heater and air conditioner
- Propane heater (less tank)
HOISTING PERFORMANCE
LINE SPEEDS AND PULLS
Main or auxiliary hoist - 15'-3/4" (0.4m) drum
Line pulls
Layer Speed Line speeds2
Available1
Permissible4
F.P.M m/min Lbs.
kgf
Lbs.
kgf
1st
High
378
115 18,200 8,260 15,200 6,880
2nd
High
413
126 16,700 7,570 13,900 6,310
3rd
High
448
136 15,400 6,990 12,800 5,820
4th
High
482
147
14,300 6,490 11,900 5,410
5th
High
502
157 13,400 6,060 11,100 5,050
High
551
168 12,500 5,680 10,400 4,730
6th3
High
585
178 11,800 5,350
9,800 4,460
7th3
DRUM WIRE ROPE CAPACITIES

Main and auxiliary drum grooved lagging
Wire
3/4" (19mm) wire rope
rope
Rope per layer
Total wire rope
layer
Feet
Meters
Feet
Meters
1
123.0
37.5
123.0
37.5
2
134.2
40.9
257.2
78.4
3
145.3
44.3
402.6
122.7
4
156.5
47.7
559.1
170.4
5
167.7
51.1
726.7
221.5
905.5
6
178.8
54.5
276.0
7
190.0
57.9
1,095.5
333.9
DRUM DIMENSIONS
2
3
Developed by machinery with each layer of wire rope, but not based
on rope strength or other limitation in machinery or equipment.
Line speeds based only on hook block, not loaded.
Sixth layer and seventh layer of wire rope are not recommended
for hoisting operations.
Permissible line pull may be affected by wire rope strength.
GR800XL-1
Root diameter
Length
Flange diameter
Inch
15-3/4"
22-3/4"
27-3/8"
mm
400
578
695
GR800XL-1 WORKING RANGE CHART

Telescoping Mode I
45 o
45 o
25 o
3.5o
220'
220'
210'
210'
200'
200'
190'
190'
1 44
80o
.4'
Boo
m
.4'
Boo
m
70o
1 44
+5
8.1
170'
' Jib
2.5
80o
150'
' Jib
140'
60o
o om
.4'
B
130'
55o
Bo
110'
40o
13 1
om
91 '
80'
om
60o
oom
170'
160'
+3
2.5
' Jib
150'
140'
130'
55o
50o
om
120'
45o
oom
110'
40o
100'
90'
Bo
om
80'
70'
64 .
4' B
o om
60'
20
' Bo
180'
+5
30o
70'
30o
om
.7'
B
.4'
B
om
8.1
' Jib
14 4
11 7
.4'
Bo
.4'
Bo
100'
oo m
Bo
70
90'
6 4.
4' B
5 1'
120'
45o
.7'
B
o om
9 1'
144
160'
+3
50o
1 17
144
180'
Lifting Height in feet
1 44
60'
20o
50'
50'
3 7.
7' B
40'
oo m
10
37 .
7' B
o om
40'
10o
30'
0o
20'
30'
40'
50'
60'
70'
80'
90' 100' 110' 120' 130' 140' 150'
Load Radius from Axis of Rotation in Feet
Boom Length in Feet (Telescoping Mode I)
30'
20'
20'
10'
Lifting Height in feet
25 o
3.5o
Telescoping Mode II
10'
0o
10'
20'
30'
40'
50'
60'
70'
80'
10'
90' 100' 110' 120' 130' 140' 150'
Load Radius from Axis of Rotation in Feet
Boom Length in Feet (Telescoping Mode II)
NOTE : 1.Boom and jib geometry shown are for unloaded condition and
machine standing level on firm supporting surface.
Boom deflection and subsequent radius and boom angle change
must be accounted for when applying load to hook.
GR800XL-1
GR800XL-1 RATED LIFTING CAPACITIES (IN POUNDS)

ON OUTRIGGERS FULLY EXTENDED 23' 7-1/2'' (7.2m) SPREAD
o
360 ROTATION
A
B
37.7'
C
10
12
15
20
25
30
35
40
45
50
60
70
80
90
100
110
120
D
(11.5m)
51'
64.4' (19.62m)
C (15.56m) C
91' (27.75m)
68 160,000 75 103,600 78 88,100 78

65 125,000 72 103,600 76 88,100 76
60 108,000 69 103,600 73 88,100 73
50 78,400 63 77,800 69 71,900 69
38 59,400 56 59,000 64 56,100 64
21 45,900 48 44,600 59 42,600 59
39 33,800 53 33,000 53
28 26,300 47 25,500 47
5 20,900 40 20,000 40
32 15,900 32
C
44,000
44,000
44,000
44,000
44,000
44,000
39,900
32,300
26,400
21,900
79
76
73
70
66
63
59
55
46
36
22
117.7' (35.87m)
44,000
44,000
44,000
39,000
34,000
28,700
23,600
19,300
13,200
9,000
6,100
79
76
73
70
66
63
59
56
47
37
24
30,800
30,800
30,800
26,700
23,200
20,400
18,200
16,400
14,500
11,400
9,500
79
77
75
72
70
67
65
59
53
46
38
27
13
30,800
30,800
30,800
28,200
24,700
21,800
19,500
14,800
10,700
7,600
5,300
3,500
2,100
79
77
75
72
70
67
64
59
53
46
38
28
12
131'
144.4'
C (39.93m) C (44.0m)
17,600
17,600
17,600
17,600
17,600
16,400
14,700
11,900
9,900
8,400
7,200
5,900
4,600
0o
79
77
75
73
71
68
63
58
53
46
39
31
19
17,600
17,600
17,600
17,600
17,600
16,200
13,300
11,100
9,000
6,900
5,100
3,600
2,600
18o
80
78
76
74
73
71
66
62
57
51
45
39
32
17,600
17,600
17,600
17,600
17,600
17,100
13,900
10,900
8,200
6,100
4,300
2,900
1,800
32o
Telescoping conditions (%)

Telescoping
mode
I, II
II
II
II
II
I, II
2nd boom
3rd boom
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
100
100
100
100
4th boom
Top boom
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS FULLY EXTENDED

o
23' 7-1/2'' (7.2m) SPREAD
360 ROTATION
A
C
37.7'
B
o
(11.5m)
51'
64.4'
64.4'
31.7 41,600 45.0 20,900 58.3 11,500 58.3 14,900 85.0
Telescoping
mode
I, II
A
B
C
D
91'
91'
117.7'
117.7'
B (15.56m) B (19.62m) B (19.62m) B (27.75m) B (27.75m) B (35.87m) B (35.87m)

I
II
5,200 85.0
I
7,900
II
2,000
111.6
111.6
4,300
II
:Boom length in feet

:Load radius in feet
:Loaded boom angle (deg.)
:Minimum boom angle (deg.) for indicated length (no load)
NOTE: -The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-L) is based on the standard number
of parts of line listed in the chart.

-Standard number of parts of line for outrigger operation should be according to the following table.
37.7'
37.7' to 51'
51' to 64.4'
64.4' to 91' 91' to 144.4'
Single top
Boom Length in Feet
(meters)
(11.5m to 15.56m) (15.56m to 19.62m) (19.62m to 27.75m) (27.75m to 44.0m)
Jib
(11.5m)
Number of parts of line
GR800XL-1
15
10
80o
75o
70o
65o
60o
55o
50o
45o
40o

360o ROTATION
144.4' (44.0m) Boom + 32.5' (9.9m) Jib
144.4' (44.0m) Boom + 58.1' (17.7m) Jib
3.5o Tilt
25o Tilt
45o Tilt
3.5o Tilt
25o Tilt
45o Tilt
C
R
W
R
W
R
W
R
W
R
W
R
W
32.7 9,900 44.5 8,800 52.7 8,100
80o
40.6 5,900 64.3 5,400 73.5 3,400
75o
50.3 9,900 61.2 8,700 67.6 7,300
60.6 5,900 82.5 4,800 89.9 3,400
70o
66.4 9,700 75.9 7,600 81.2 6,600
79.3 5,900 98.7 4,200 105.0 3,400
65o
80.5 7,900 89.3 6,600 93.9 6,000
95.6 4,900 114.0 3,700 118.0 3,100
o
93.7 6,300 102.0 5,700 106.0 5,400
60
111.0 4,100 126.0 3,300 131.0 2,900
106.0 5,100 113.0 4,500 116.0 4,300
55o
124.0 3,100 141.0 2,900 142.0 2,700
50o
117.0 3,500 124.0 3,100 125.0 3,000
137.0 2,100 151.0 1,800 152.0 1,700
45o
127.0 2,200 133.0 2,000 134.0 2,000
149.0 1,200
137.0 1,300 142.0 1,200

360o ROTATION
117.7' (35.87m) Boom (telescoping mode I)
+ 32.5' (9.9m) Jib
+ 58.1' (17.7m) Jib
C
3.5o Tilt
25o Tilt
45o Tilt
3.5o Tilt
25o Tilt
45o Tilt
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
30o
25o
R
W
R
W
R
26.1 12,300 37.7 11,000 44.8
40.1 12,300 50.7 10,000 57.0
53.6 12,100 62.9 8,800 68.5
65.7 9,900 74.6 7,700 79.0
76.9 8,400 85.2 6,800 88.9
87.6 7,000 95.4 6,000 98.2
97.5 5,800 104.0 5,200 106.0
106.0 4,300 113.0 4,000 114.0
115.0 3,200 120.0 3,000
122.0 2,400 126.0 2,300
128.0 1,700 132.0 1,700
134.0 1,200 137.0 1,200
W
8,400
8,000
7,400
6,700
6,200
6,000
5,400
4,200
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
R
33.6
50.4
65.9
80.2
93.5
106.0
117.0
127.0
136.0
145.0
W
7,900
7,900
7,100
6,000
5,100
4,500
3,900
2,900
2,000
1,300
R
55.1
70.3
84.4
97.2
109.0
120.0
130.0
138.0
146.0
153.0
W
5,700
5,200
4,700
4,200
3,800
3,500
3,200
2,600
1,800
1,200
R
67.0
80.7
93.1
104.0
114.0
124.0
132.0
140.0
W
3,700
3,700
3,600
3,500
3,300
3,100
3,000
2,600

360o ROTATION
117.7' (35.87m) Boom (telescoping mode II)
+ 32.5' (9.9m) Jib
+ 58.1' (17.7m) Jib
C
o
o
o
3.5 Tilt
25 Tilt
45 Tilt
3.5o Tilt
25o Tilt
45o Tilt
C
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
30o
25o
o
20
o
15
R
W
R
W
R
26.8 11,000 39.1 10,300 46.6
41.0 11,000 52.3 9,300 58.8
54.5 10,600 64.5 8,000 70.1
66.3 8,600 75.9 7,000 80.4
77.6 7,100 86.6 6,200 90.2
88.4 5,900 96.5 5,300 98.9
98.2 5,000 105.0 4,600 107.0
107.0 4,300 113.0 4,100 114.0
115.0 3,800 120.0 3,600
122.0 3,400 127.0 3,300
129.0 3,100 132.0 3,000
134.0 2,800 137.0 2,800
139.0 2,650
142.0 2,500
W
8,300
7,700
6,900
6,200
5,700
5,200
4,500
4,000
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
30o
25o
o
20
o
15
R
34.2
51.0
67.0
80.9
94.2
106.0
118.0
128.0
137.0
145.0
153.0
159.0
164.0
168.0
W
6,300
6,300
6,300
5,300
4,500
3,900
3,300
2,800
2,400
2,100
1,900
1,700
1,550
1,450
R
56.8
71.7
85.4
98.4
110.0
121.0
131.0
139.0
147.0
153.0
159.0
163.0
W
5,700
5,100
4,400
3,900
3,500
3,100
2,800
2,600
2,300
2,000
1,800
1,700
R
67.7
81.4
93.8
105.0
115.0
124.0
132.0
140.0
W
3,700
3,700
3,600
3,300
3,000
2,800
2,700
2,500
C :Loaded boom angle (deg.)

R :Load radius in feet
W :Rated lifting capacity in pounds
GR800XL-1

ON OUTRIGGERS MID EXTENDED 21' 11-3/4'' (6.7m) SPREAD
360o ROTATION
A
B
37.7'
C
10
12
15
20
25
30
35
40
45
50
60
70
80
90
100
110
D
51'
(11.5m)
64.4' (19.62m)
C (15.56m) C
68 160,000 75 103,600 78
65 125,000 72 103,600 76
60 108,000 69 103,600 73
50 78,400 63 77,800 69
38 59,400 56 56,100 64
21 40,300 48 39,200 59
39 29,000 53
28 22,200 47
5 17,000 40
32
91' (27.75m)
C
88,100
88,100
88,100
71,900
55,200
38,400
28,200
21,400
16,500
12,800
78
76
73
69
64
59
53
47
40
32
C
44,000
44,000
44,000
44,000
44,000
44,000
35,200
27,600
22,200
18,000
79
76
73
70
66
63
59
55
46
36
22
117.7' (35.87m)
44,000
44,000
44,000
39,000
32,000
24,900
19,800
15,900
10,500
6,800
4,200
79
76
73
70
66
63
59
56
47
37
24
30,800
30,800
30,800
26,700
23,200
20,400
18,200
16,400
14,500
9,900
7,100
0o
79
77
75
72
70
67
64
59
52
45
37
27
30,800
30,800
30,800
28,200
24,700
21,800
17,800
11,900
8,000
5,200
3,200
1,600
79
77
75
72
70
67
64
59
53
46
38
28
13
27o
131'
144.4'
C (39.93m) C
17,600
17,600
17,600
17,600
17,600
16,400
14,700
11,900
9,900
7,800
5,700
4,100
2,800
0o
79
77
75
73
71
68
63
58
52
46
39
30
17,600
17,600
17,600
17,600
17,600
16,200
13,300
9,600
6,800
4,700
3,100
1,900
30o
80
78
76
74
73
71
66
61
56
51
45
39
(44.0m)
17,600
17,600
17,600
17,600
17,600
17,100
12,800
8,900
6,100
4,000
2,400
1,200
39o

Telescoping
mode
I, II
II
II
II
II
I, II
2nd boom
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
100
100
100
100
3rd boom
4th boom
Top boom
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS MID EXTENDED

21' 11-3/4'' (6.7m) SPREAD
360o ROTATION
A
C
37.7'
B
0o
(11.5m)
51'
31.7 36,400 45.0 17,000 58.3
Telescoping
mode
I, II
A
B
C
D
64.4'
64.4'
91'
91'
117.7'
B (15.56m) B (19.62m) B (19.62m) B (27.75m) B (27.75m)

I
9,000 58.3 14,300 85.0

I
II
3,200 85.0
I
B (35.87m)
6,000
111.6
II
2,500
II


37.7'
37.7' to 51'
51' to 64.4'
64.4' to 91'
91' to 144.4'
Single top
Boom Length in Feet
(meters)
(11.5m)
Jib
GR800XL-1
15
10
80o
75o
70o
65o
60o
55o
50o

360o ROTATION
144.4' (44.0m) Boom + 32.5' (9.9m) Jib
144.4' (44.0m) Boom + 58.1' (17.7m) Jib
o
o
o
o
o
o
3.5 Tilt
25 Tilt
45 Tilt
3.5 Tilt
25 Tilt
45 Tilt
C
R
W
R
W
R
W
R
W
R
W
R
W
32.7 9,900 44.5 8,800 52.7 8,100
80o
40.6 5,900 64.3 5,400 73.5 3,400
o
75
50.3 9,900 61.2 8,700 67.6 7,300
60.6 5,900 82.5 4,800 89.9 3,400
66.4 9,700 75.9 7,600 81.2 6,600
70o
79.3 5,900 98.7 4,200 105.0 3,400
80.0 7,200 89.3 6,600 93.9 6,000
65o
95.6 4,900 114.0 3,700 118.0 3,100
o
60
92.4 4,700 101.0 4,400 105.0 4,100
110.0 3,400 127.0 2,800 130.0 2,500
55o
104.0 2,900 112.0 2,700 115.0 2,600
123.0 1,800 138.0 1,500 141.0 1,400
115.0 1,600 122.0 1,500 124.0 1,500

360o ROTATION
+ 32.5' (9.9m) Jib
+ 58.1' (17.7m) Jib
C
o
o
o
o
o
o
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
45o
40o
25 Tilt
45 Tilt
R
W
R
W
R
26.1 12,300 37.7 11,000 44.8
40.1 12,300 50.7 10,000 57.0
53.6 12,100 62.9 8,800 68.5
65.7 9,900 74.6 7,700 79.0
76.9 8,100 85.2 6,800 88.9
87.2 5,700 94.8 5,100 97.7
96.8 3,900 104.0 3,500 106.0
106.0 2,600 112.0 2,300 113.0
114.0 1,600 119.0 1,400
W
8,400
8,000
7,400
6,700
6,200
4,700
3,400
2,300
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
45o
R
33.6
50.4
65.9
80.2
93.5
105.0
116.0
126.0
W
7,900
7,900
7,100
6,000
5,100
3,800
2,500
1,400
25 Tilt
R
55.1
70.3
84.4
97.2
109.0
120.0
129.0
138.0
W
5,700
5,200
4,700
4,200
3,800
3,300
2,100
1,300
45 Tilt
R
67.0
80.7
93.1
104.0
114.0
124.0
132.0
139.0
W
3,700
3,700
3,600
3,500
3,300
3,000
2,000
1,200

360o ROTATION
+ 32.5' (9.9m) Jib
+ 58.1' (17.7m) Jib
C
o
o
o
o
o
o
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
30o
25o
o
20
o
15
25 Tilt
45 Tilt
R
W
R
W
R
26.8 11,000 39.1 10,300 46.6
41.0 11,000 52.3 9,300 58.8
54.5 10,600 64.5 8,000 70.1
66.3 8,600 75.9 7,000 80.4
77.6 7,100 86.6 6,200 90.2
88.4 5,900 96.5 5,300 98.9
98.2 5,000 105.0 4,600 107.0
107.0 4,300 113.0 4,100 114.0
115.0 3,400 120.0 3,300
122.0 2,700 126.0 2,600
128.0 2,100 132.0 2,100
134.0 1,700 137.0 1,700
138.0 1,400
142.0 1,200
W
8,300
7,700
6,900
6,200
5,700
5,200
4,500
4,000
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
30o
R
34.2
51.0
67.0
80.9
94.2
106.0
118.0
128.0
137.0
145.0
152.0
W
6,300
6,300
6,300
5,300
4,500
3,900
3,300
2,800
2,100
1,500
1,100
25 Tilt
R
56.8
71.7
85.4
98.4
110.0
121.0
131.0
139.0
146.0
153.0
W
5,700
5,100
4,400
3,900
3,500
3,100
2,800
2,600
2,000
1,400
45 Tilt
R
67.7
81.4
93.8
105.0
115.0
124.0
132.0
140.0
W
3,700
3,700
3,600
3,300
3,000
2,800
2,700
2,500

GR800XL-1

ON OUTRIGGERS MID EXTENDED 18' 1/2'' (5.5m) SPREAD
360o ROTATION
A
B
37.7'
C
10
12
15
20
25
30
35
40
45
50
60
70
80
90
100
110
D
51'
(11.5m)
64.4' (19.62m)
C (15.56m) C
68 160,000 75 103,600 78
65 125,000 72 103,600 76
60 108,000 69 103,600 73
50 64,600 62 62,400 69
38 42,600 56 41,400 64
21 29,100 48 30,300 59
39 21,100 53
28 15,700 47
5 11,600 40
32
C
88,100
88,100
88,100
61,500
40,600
28,200
20,300
15,000
11,000
8,000
78
76
73
69
64
59
53
47
40
32
91' (27.75m)
C
44,000
44,000
44,000
44,000
44,000
34,200
26,100
20,500
16,300
13,100
79
76
73
70
66
62
59
55
46
36
21
117.7' (35.87m)
44,000
44,000
43,500
31,600
23,700
18,200
14,200
11,100
6,600
3,500
1,400
79
76
73
70
66
63
59
55
46
36
23
30,800
30,800
30,800
26,700
23,200
20,400
18,000
14,700
10,000
6,800
4,600
0o
79
77
75
72
70
67
64
58
52
45
30,800
30,800
30,800
26,100
20,300
16,100
12,800
8,100
4,900
2,700
41o
79
77
75
72
70
67
64
59
52
45
37
27
12
17,600
17,600
17,600
17,600
17,600
16,400
14,700
10,900
7,600
5,300
3,500
2,200
1,100
12o
131'
144.4'
C (39.93m) C
(44.0m)
79
77
75
73
71
68
63
57
52
45
38
17,600
17,600
17,600
17,600
16,900
13,600
8,900
5,700
3,500
1,800
17,600
17,600
17,600
17,600
17,600
14,700
9,900
6,700
4,300
2,600
1,200
80
78
76
74
73
70
66
61
56
50
38o
50o

Telescoping
mode
I, II
II
II
II
II
I, II
2nd boom
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
100
100
100
100
3rd boom
4th boom
Top boom

18' 1/2'' (5.5m) SPREAD
360o ROTATION
A
C
37.7'
B
0o
(11.5m)
51'
31.7 26,400 45.0 11,600 58.3
Telescoping
mode
I, II
A
B
C
D
64.4'
64.4'
91'
91'
B (15.56m) B (19.62m) B (19.62m) B (27.75m) B (27.75m)

I
5,000 58.3
I
9,700 85.0
II
1,100 85.0
I
3,700
II


37.7'
37.7' to 51'
51' to 64.4'
64.4' to 91'
91' to 144.4'
Single top
Boom Length in Feet
(meters)
(11.5m)
Jib
GR800XL-1
15
10
10
80o
75o
70o
65o
60o
55o

360o ROTATION
144.4' (44.0m) Boom + 32.5' (9.9m) Jib
144.4' (44.0m) Boom + 58.1' (17.7m) Jib
o
o
o
o
o
o
3.5 Tilt
25 Tilt
45 Tilt
3.5 Tilt
25 Tilt
45 Tilt
C
R
W
R
W
R
W
R
W
R
W
R
W
32.7 9,900 44.5 8,800 52.7 8,100
80o
40.6 5,900 64.3 5,400 73.5 3,400
50.3 9,900 61.2 8,700 67.6 7,300
75o
60.6 5,900 82.5 4,800 89.9 3,400
65.3 8,000 75.0 6,700 80.9 6,300
70o
78.6 5,400 98.7 4,200 105.0 3,400
78.3 5,000 87.5 4,100 92.5 4,000
65o
93.2 3,100 112.0 2,000 117.0 2,400
90.9 2,800 99.2 2,300 103.0 2,300
60o 107.0 1,500 125.0 1,300 129.0 1,100
102.0 1,300 111.0 1,100 114.0 1,100

360o ROTATION
+ 32.5' (9.9m) Jib
+ 58.1' (17.7m) Jib
C
o
o
o
o
o
o
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
25 Tilt
45 Tilt
R
W
R
W
R
26.1 12,300 37.7 11,000 44.8
40.1 12,300 50.7 10,000 57.0
53.1 11,000 62.9 8,800 68.5
65.0 8,100 74.4 7,300 78.9
75.6 5,300 84.4 4,800 88.4
86.2 3,300 94.0 3,000 97.2
95.8 1,800 103.0 1,700 105.0
W
8,400
8,000
7,400
6,200
4,200
2,700
1,600
3.5 Tilt
80o
75o
70o
65o
60o
55o
R
33.6
50.4
65.9
79.9
92.0
104.0
25 Tilt
W
R
7,900 55.1
7,900 70.3
7,100 84.4
5,700 97.2
3,500 108.0
1,900 119.0
45 Tilt
W
R
5,700 67.0
5,200 80.7
4,700 93.1
4,200 104.0
3,000 114.0
1,700 123.0
W
3,700
3,700
3,600
3,500
2,600
1,500

360o ROTATION
+ 32.5' (9.9m) Jib
+ 58.1' (17.7m) Jib
C
o
o
o
o
o
o
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
45o
40o
35o
25 Tilt
45 Tilt
R
W
R
W
R
26.8 11,000 39.1 10,300 46.6
41.0 11,000 52.3 9,300 58.8
54.5 10,600 64.5 8,000 70.1
66.3 8,600 75.9 7,000 80.4
77.5 7,000 86.6 6,200 90.2
87.8 5,000 96.0 4,700 98.5
97.4 3,600 104.0 3,400 106.0
106.0 2,500 112.0 2,500 114.0
114.0 1,700 119.0 1,700
121.0 1,200 126.0 1,100
W
8,300
7,700
6,900
6,200
5,700
4,300
3,200
2,300
3.5 Tilt
80o
75o
70o
65o
60o
55o
50o
45o
R
34.2
51.0
67.0
80.9
94.2
106.0
117.0
127.0
W
6,300
6,300
6,300
5,300
4,500
3,500
2,300
1,500
25 Tilt
R
56.8
71.7
85.4
98.4
110.0
121.0
130.0
138.0
W
5,700
5,100
4,400
3,900
3,500
3,000
2,000
1,300
45 Tilt
R
67.7
81.4
93.8
105.0
115.0
124.0
132.0
139.0
W
3,700
3,700
3,600
3,300
3,000
2,700
1,800
1,200

GR800XL-1
11

ON OUTRIGGERS MIN EXTENDED 9' 2-1/2'' (2.8m) SPREAD
360o ROTATION
A
B
10
12
15
20
25
30
35
40
45
50
60
70
37.7'
51'
(11.5m)
68
65
60
50
38
21
84,100
62,000
42,400
25,700
16,800
11,000
C (15.56m)
75 77,900
72 58,200
68 40,000
62 23,900
55 15,300
48 9,900
39 6,200
28 3,400
5 1,300
64.4' (19.62m)
C
78
76
73
69
64
59
53
47
0o
C
76,000
56,800
39,000
23,200
14,600
9,200
5,500
2,800
78
76
73
69
64
58
53
47
40
32
44o
91' (27.75m)
C
44,000
44,000
43,800
28,700
19,900
14,300
10,400
7,400
5,200
3,400
0o
79
76
72
69
65
62
58
54
41,700
26,600
17,800
12,400
8,600
5,600
3,400
1,700
54o
79
76
72
69
66
62
58
54
45
117.7' (35.87m)
30,800
30,500
21,600
15,900
11,900
8,900
6,700
4,900
2,300
43o
131'
144.4'
C (39.93m) C
79 28,400 79 17,600
77 19,500 77 17,600 79
74 13,900 75 16,600 77
72 9,900 72 12,700 74
69 6,900 69 9,600 72
66 4,700 66 7,300 69
63 2,900 64 5,600 67
58 3,000 62
51 1,200
61o
51o
17,600
15,700
11,800
8,700
6,400
4,700
2,100
(44.0m)
80 17,600
78 14,900
76 11,000
74 7,900
71 5,700
69 3,900
65 1,300
61o
65o

Telescoping
mode
I, II
II
II
II
II
I, II
2nd boom
0
0
0
0
50
0
0
0
100
0
0
0
0
33
33
33
100
33
33
33
0
66
66
66
100
66
66
66
0
100
100
100
50
100
100
100
100
100
100
100
3rd boom
4th boom
Top boom

9' 2-1/2'' (2.8m) SPREAD
360o ROTATION
A
C
37.7'
B
0o
31.7
Telescoping
mode
(11.5m)
64.4'
B (19.62m)
9,400 45.0
I, II
A
B
C
D
51'
B (15.56m)
1,300
58.3
1,700
II


37.7'
37.7' to 51'
51' to 64.4'
64.4' to 91'
91' to 144.4'
Single top
Boom Length in Feet
(meters)
(11.5m)
Jib
GR800XL-1
12
WARNING AND OPERATING INSTRUCTIONS

FOR LIFTING CAPACITIES
GENERAL
1. RATED LIFTING CAPACITIES apply only to the machine as
originally manufactured and normally equipped by TADANO
LTD. Modifications to the machine or use of optional
equipment other than that specified can result in a reduction
of capacity.
2. Construction equipment can be hazardous if improperly
operated or maintained. Operation and maintenance of this
machine must be in compliance with information in the
operation, safety and maintenance manual supplied with
machine. If these manuals are missing, order replacements
through the distributor.
3. The operator and other personnel associated with this
machine shall fully acquaint themselves with the latest
American National Standards Institute (ANSI) safety
standards for cranes.
SET UP
1. Rated lifting capacities on the chart are the maximum
allowable crane capacities and are based on the machine
standing level on firm supporting surface under ideal job
conditions. Depending on the nature of the supporting
surface, it may be necessary to have structural supports
under the outrigger floats or tires to spread the loads to a
larger bearing surface.
2. For outrigger operation, outriggers shall be properly extended
with tires free of supporting surface before operating crane.
OPERATION
1. Rated lifting capacities have been tested to and meet
minimum requirements of SAE J1063-Cantilevered Boom
Crane Structures Method of Test.
2. Rated lifting capacities do not exceed 85 % of the tipping
load on outriggers fully extended as determined by SAE
J765-Crane Stability Test Code.
Rated lifting capacities for partially extended outriggers are
determined from the formula, Rated Lifting Capacities
=(Tipping Load - 0.1 x Tip Reaction)/1.25.
3. Rated lifting capacities above bold lines in the chart are
based on crane strength and those below, on its stability.
They are based on actual load radius increased by boom
deflection.
4. The weight of handling device such as hook blocks, slings,
etc., must be considered as part of the load and must be
deducted from the lifting capacities.
5. Rated lifting capacities are based on freely suspended loads
and make no allowance for such factors as the effect of wind,
sudden stopping of loads, supporting surface conditions,
inflation of tires, operating speeds, side loads, etc. Side pull
on boom or jib is extremely dangerous.
6. Rated lifting capacities do not account for wind on lifted load
or boom. Rated lifting capacities and boom length shall be
appropriately reduced, when wind velocity is above 20 mph
(9 m/sec.).
7. Rated lifting capacities at load radius shall not be exceeded.
Do not tip the crane to determine allowable loads.
8. Do not operate at boom lengths, radii, or boom angle, where
no capacities are shown. Crane may overturn without any
load on the hook.
9. When boom length is between values listed, refer to the
rated lifting capacities of the next longer and next shorter
booms for the same radius. The lesser of the two rated lifting
capacities shall be used.
GR800XL-1
10. When making lifts at a load radius not shown, use the next
longer radius to determine allowable capacity.
11. Load per line should not exceed 12,300 lbs. (5,600kg) for
main winch and auxiliary winch.
12. Check the actual number of parts of line with LOAD MOMENT
INDICATOR (AML-L) before operation. Maximum lifting
capacity is restricted by the number of parts of line of LOAD
MOMENT INDICATOR (AML-L). Limited capacity is as
determined from the formula, Single line pull for main winch
(12,300 lbs.) x number of parts of line.
13. The boom angle before loading should be greater to account
for deflection. For rated lifting capacities, the loaded boom
angle and the load radius is for reference only.
14. The 37.7' (11.5m) boom length capacities are based on boom
fully retracted. If not fully retracted [less than 51'(15.56m)
boom length, use the rated lifting capacities for the 51' (15.56m)
boom length.
15. Extension or retraction of the boom with loads may be
attempted within the limits of the RATED LIFTING CAPACITIES.
The ability to telescope loads is limited by hydraulic pressure,
boom angle, boom length, crane maintenance, etc.
16. For lifting capacity of single top, reduce the rated lifting
capacities of relevant boom according to a weight reductions
for auxiliary load handling equipment. Capacities of single top
shall not exceed 12,300 lbs. (5,600kg) including main hook.
17. When base jib or top jib or both jib removing, jib state switch
select removed.
18. When erecting and stowing jib, be sure to retain it by hand or by
other means to prevent its free movement.
19. Use "ANTI-TWO BLOCK" disable switch when erecting and
stowing jib and when stowing hook block. While the switch is
pushed, the hoist does not stop, even when overwind condition
occurs.
20. For boom length with 32.5' (9.9m) jib, rated lifting capacities are
determined by loaded boom angle only in the column headed
"144.4' (44.0m) boom + 32.5' (9.9m) jib".
For boom length with 58.1' (17.7 m) jib, rated lifting capacities
are determined by loaded boom angle only in the column
headed "144.4' (44.0m) boom + 58.1' (17.7m) jib".
For angles not shown, use the next lower loaded boom angle
to determine allowable capacity.
21. When lifting a load by using jib (aux. winch) and boom (main
winch) simultaneously, do the following:
Enter the operation status as jib operation, not as boom
operation.
Before starting operation, make sure that mass of load is
within rated lifting capacity for jib.
DEFINITIONS
1. Load Radius: Horizontal distance from a projection of the axis
of rotation to supporting surface before loading to the center of
the vertical hoist line or tackle with load applied.
2. Loaded Boom Angle: The angle between the boom base
section and the horizontal, after lifting the rated lifting capacity
at the load radius.
3. Working Area: Area measured in a circular arc about the
centerline of rotation.
4. Freely Suspended Load: Load hanging free with no direct
external force applied except by the hoist line.
5. Side Load: Horizontal side force applied to the lifted load either
on the ground or in the air.
13

ON RUBBER
TIRE : 29.5-25 22PR
Stationary
A
OVER FRONT
37.7'
B
10
12
15
20
25
30
35
40
45
50
55
60
65
70
75
80
Creep
o
64.4'
(11.5m)
68
65
59
50
38
21
71,200
62,200
51,600
39,400
28,000
20,300
(19.62m)
69 35,300
64 29,400
59 23,600
53 18,100
47 14,300
40 11,200
32 9,000
21 7,100
0o
OVER FRONT
360 ROTATION
91'
37.7'
(27.75m)
69 22,100
66
62
59
55
50
46
41
36
29
22
19,100
15,300
12,400
10,000
8,200
6,600
5,400
4,300
3,400
2,700
64.4'
(11.5m)
68
65
59
50
38
21
49,500
41,700
29,400
18,000
11,600
7,600
(19.62m)
21,300
14,700
10,600
7,500
5,300
3,600
2,300
1,200
69
64
58
53
47
40
32
21
91'
69
65
62
58
54
50
45
0o
21o
(27.75m)
10,600
7,800
5,800
4,200
3,000
2,100
1,300
37.7'
64.4'
(11.5m)
68
65
59
50
38
21
55,200
47,800
39,200
29,000
22,200
17,200
69
64
59
(19.62m)
53
47
40
32
21
45o
31,900
25,200
20,200
16,500
13,500
11,100
9,000
7,100
0o
91'
69
66
62
59
55
50
46
41
36
29
22
(27.75m)
21,200
17,500
14,600
12,200
10,000
8,200
6,600
5,400
4,300
3,400
2,700
Telescoping
mode
I, II
II
II
I, II
II
II
I, II
II
II
2nd boom
0
0
0
0
0
33
33
33
0
66
66
66
0
0
0
0
0
33
33
33
0
66
66
66
0
0
0
0
0
33
33
33
0
66
66
66
3rd boom
4th boom
Top boom
LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON RUBBER OPERATION
Stationary
A
37.7'
B
o
Creep
360o ROTATION
OVER FRONT
31.7
A
B
C
D
(11.5m)
64.4'
18,600 58.3
(19.62m)
91'
6,000 85.0
(27.75m)
OVER FRONT
37.7'
1,900 31.7
37.7'
(11.5m)
6,600
31.7
(11.5m)
64.4'
16,100 58.3
(19.62m)
91'
6,000 85.0
(27.75m)
1,900

NOTE: -The lifting capacity data stored in the LOAD MOMENT INDICATOR (AML-L)
is based on the standard number of parts of line listed in the chart.

-Standard number of parts of line for rubber operation should be according
to the following table.
37.7'
Boom Length in Feet
(meters)
(11.5m)
37.7' to 91'
(11.5m to 27.75m)
Single top
Jib
1

FOR ON RUBBER LIFTING CAPACITIES
1.Rated lifting capacities on rubber are in pounds and do not exceed 6. Over front operation shall be performed within two degrees in front of
chassis.
75 % of tipping loads as determined by SAE J765-Crane Stability
Test Code.
7. On rubber lifting with "jib" is not permitted. Maximum permissible
boom length is 87 ft. (26.52m).
2.Rated lifting capacities shown in the chart are based on condition
that crane is set on firm level surfaces with axle oscillation lockout
8. When making lift on rubber stationary, set parking brake.
applied. Those above bold lines are based on tire capacity and
9. For creep operation, boom must be centered over front of machine,
those below, on crane stability. They are based on actual load
swing lock engaged, and load restrained from swinging. Travel slowly
radius increased by tire deformation and boom deflection.
and keep the lifted load as close to the ground as possible, and
especially avoid any abrupt steering, accelerating or braking.
3.If the axle oscillation lockout cylinders contain air, the axle will not
be locked completely and rated lifting capacities may not be
10. Do not operate the crane while carrying the load.
11. Creep is motion for crane not to travel more than 200 ft. (60 m) in any
obtainable. Bleed the cylinders according to the operation safety
and maintenance manual.
30 minute period and to travel at the speed of less than 1mph (1.6km/h).
4.Rated lifting capacities are based on proper tire inflation, capacity 12. For creep operation, set Drive select switch to "4-WHEEL (Lo)" and
and condition. Damaged tires are hazardous to safe operation of
set gear shift lever to "1".
crane.
5.Tires shall be inflated to correct air pressure.
Tires
Air Pressure
29.5-25 22PR
60 psi (4.2 kgf/cm2)
GR800XL-1
14

FOR USING THE LOAD MOMENT INDICATOR (AML-L)
1. When operating crane on outriggers:
Set P.T.O. switch to "ON".
Press the outrigger mode select key to register for the
outrigger operation. Press the set key, then the outrigger
mode indicative symbol changes from flickering to lighting.
Press the boom mode select key to register the boom mode,
then the boom mode indicative symbol changes from
lighting to flickering. Each time the boom mode select key is
pressed, the mode changes. Press the set key to select
the status that corresponds to the actual state of the boom,
then the boom mode indicative symbol changes from flickering
to lighting.
When erecting and stowing jib, select the status of jib set
(jib state indicative symbol flicker).
2. When operating crane on rubber:
Set P.T.O. switch to "ON".
Press the outrigger mode select key. The on-tire mode
indicative symbol comes on. Each time the outrigger mode
select key is pressed the mode changes. Select the creep
operation, the on-tire mode indicative symbol flicker.
Press the boom mode select key to register the boom mode.
However, pay attention to the following.
(1) For stationary operation.
The front capacities are attainable only when the over front
position symbol comes on. When the boom is more than
2 degrees from centered over front of chassis, 360o
capacities are in effect.
When a load is lifted in the front position and then swung

to the side area, make sure the value of the LOAD
MOMENT INDICATOR(AML-L) is below the 360o lifting
capacity.
(2) For creep operation.
The creep capacities are attainable only when boom is
in the straight forward position of chassis and the over
front position symbol is on. If boom is not in the straight
forward position of chassis , never lift load.
3. A swing does not automatically stop even if the crane
becomes overloaded.
4. During crane operation, make sure that the displays on front
panel are in accordance with actual operating conditions.
5. The displayed values of LOAD MOMENT INDICATOR
(AML-L) are based on freely suspended loads and make no
allowance for such factors as the effect of wind, sudden
stopping of loads, supporting surface conditions, inflation of
tire, operating speed, side loads, etc.
For safe operation, it is recommended when extending and
lowering boom or swinging, lifting loads shall be
appropriately reduced.
6. LOAD MOMENT INDICATOR (AML-L) is intended as an aid
to the operator. Under no condition should it be relied upon
to replace use of capacity charts and operating instruction.
Sole
reliance upon LOAD MOMENT INDICATOR (AML-L)
aids in place of good operating practice can cause an
accident. The operator must exercise caution to assure
safety.
GR800XL-1- 4 Axle weight distribution chart

Rear
GVW
Kilograms
Front
Rear
54,437
51,498
48,051
24,692
23,359
-289
-677
-1,832
-110
-17,355
-401
-880
-3,543
-324
7,474
112
203
1,711
214
-24,828
-131
-307
-831
-50
-7,872
-182
-399
-1,607
-147
3,390
51
92
776
97
-11,262
1,817
950
214
3,276
1,713
68
-1,459
-763
146
824
431
97
1,486
777
31
-662
-346
66
GVW
Base machine
Remove: 1.
2.
3.
4.
5.
6.2 ton (5.6 metric ton) hook ball

Top jib (25.6')
Base jib (32.5')
Auxiliary lifting sheave
Removable Counterweight
Options: 1. 80 ton (72.6 metric ton) hook block

2. 50 ton (45.4 metric ton) hook block
3. Hot water cab heater and air conditioner
GR800XL-1
105,934
Pounds
Front
15
GR800XL-1
16
GR800XL-1
17

Tadano Model Gr800Xl-1 - 80 Ton Capacity: Lifting Charts - Rough Terrain Cranes

Uploaded by

Copyright:

Available Formats

Tadano Model Gr800Xl-1 - 80 Ton Capacity: Lifting Charts - Rough Terrain Cranes

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tadano Model Gr800Xl-1 - 80 Ton Capacity: Lifting Charts - Rough Terrain Cranes

Uploaded by

Copyright:

Available Formats

LIFTING CHARTS - Rough Terrain Cranes

TADANO MODEL GR800XL-1 - 80 TON CAPACITY

46' 8-1/4" (14230)

11' 4-1/2" (3470)

12' 5-1/2" (3800)

8' 2-1/2" (2502)

DRUM - Grooved 15-3/4"(0.40m) root diameter x 22-3/4"

DRUM - Grooved 15-3/4"(0.40m) root diameter x 22-3/4"

Dash-mounted engine start/stop, monitor lamps, cigarette lighter

AUXILIARY HOIST - Variable speed type with grooved drum

Instruments - Torque converter oil temperature, engine water

Tadano electronic LOAD MOMENT INDICATOR system

TADANO AML-L monitors outrigger extended length and

SUSPENSION - Front: Rigid mounted to frame. Rear: Pivot

Fin and tube core, thermostat controlled

Independently controlled outriggers

DRUM WIRE ROPE CAPACITIES

GR800XL-1 WORKING RANGE CHART

Lifting Height in feet

90' 100' 110' 120' 130' 140' 150'

Load Radius from Axis of Rotation in Feet

Boom Length in Feet (Telescoping Mode I)

Lifting Height in feet

90' 100' 110' 120' 130' 140' 150'

Load Radius from Axis of Rotation in Feet

Boom Length in Feet (Telescoping Mode II)

GR800XL-1 RATED LIFTING CAPACITIES (IN POUNDS)

68 160,000 75 103,600 78 88,100 78

Telescoping conditions (%)

LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS FULLY EXTENDED

31.7 41,600 45.0 20,900 58.3 11,500 58.3 14,900 85.0

B (15.56m) B (19.62m) B (19.62m) B (27.75m) B (27.75m) B (35.87m) B (35.87m)

:Boom length in feet

of parts of line listed in the chart.

GR800XL-1 RATED LIFTING CAPACITIES (IN POUNDS)

ON OUTRIGGERS FULLY EXTENDED 23' 7-1/2'' (7.2m) SPREAD

ON OUTRIGGERS FULLY EXTENDED 23' 7-1/2'' (7.2m) SPREAD

ON OUTRIGGERS FULLY EXTENDED 23' 7-1/2'' (7.2m) SPREAD

C :Loaded boom angle (deg.)

GR800XL-1 RATED LIFTING CAPACITIES (IN POUNDS)

Telescoping conditions (%)

LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS MID EXTENDED

31.7 36,400 45.0 17,000 58.3

B (15.56m) B (19.62m) B (19.62m) B (27.75m) B (27.75m)

9,000 58.3 14,300 85.0

:Boom length in feet

of parts of line listed in the chart.

GR800XL-1 RATED LIFTING CAPACITIES (IN POUNDS)

ON OUTRIGGERS MID EXTENDED 21' 11-3/4'' (6.7m) SPREAD

ON OUTRIGGERS MID EXTENDED 21' 11-3/4'' (6.7m) SPREAD

ON OUTRIGGERS MID EXTENDED 21' 11-3/4'' (6.7m) SPREAD

C :Loaded boom angle (deg.)

GR800XL-1 RATED LIFTING CAPACITIES (IN POUNDS)

Telescoping conditions (%)

LIFTING CAPACITIES AT ZERO DEGREE BOOM ANGLE ON OUTRIGGERS MID EXTENDED

31.7 26,400 45.0 11,600 58.3

B (15.56m) B (19.62m) B (19.62m) B (27.75m) B (27.75m)

:Boom length in feet

of parts of line listed in the chart.