KIP System Installation Wizard

Operator Guide
 KIP System Installation Wizard

Contents
Home Screen .............................................................................................................................................................................1

Regional Settings.......................................................................................................................................................................2

Supplies and Support ...............................................................................................................................................................5

Network ......................................................................................................................................................................................7

Keycode .....................................................................................................................................................................................9

Toner Setup ..............................................................................................................................................................................11

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-1-
 KIP System Installation Wizard

Home Screen

No. Name Function

1 Regional Settings This will allow the selection and setup of Regional settings
2 Supplies and Initial setup of Dealer information
Support
3 Network Initial setup of the network configuration.
4 KeyCodes Allows the entry of the keycodes for purchased options
5 Toner Setup Initial toner installation in the KIP 700M and 7100 Units only

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-1-
 KIP System Installation Wizard

Regional Settings
The Administrar or Technician doing the initial setup of the KIP Printer will need to go through the KIP
Installation Wizard upon first boot of the system. This will walk them through the proper setup procedures
of the system to ensure that this unit is installed correctly and make it ready to print.

The First Step is to set the Regional settings.

Select the Regional Setting Icon to begin.

Note: Step 2 etc. cannot be done until Step one is completed.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-2-
KIP System Installation Wizard

The First screen to open up will be the language settings screen. Please choose the desired Language
that the KIP Printer will be set up to use.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-3-
KIP System Installation Wizard

Once the language has been select the following window will open. This window will show the selected
language in the upper left corner and allow the correct setting of the Time, Date and Time Zone. Please
set up correctly according to your location before continuing.

Note: the KIP Printer default is the Eastern Time Zone.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-4-
 KIP System Installation Wizard

Supplies and Support

Step Two is setting up the Supplies and Support section. This allows for the entry of Dealer information
making it easier for users to contact their Dealer if necessary.

Selecting the Supplies and Support Icon will advance to the next screen where the information can be
entered.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-5-
KIP System Installation Wizard

Dealer information can be entered for the following:

• Dealer Name

• Supplies #

• Service #

• Website Name

• Website URL

Selecting any of the white boxes will bring up the on screen

Keyboard and allow for the entry of the information.

Once all of the information has been entered select the

Right arrow to continue.

Note: If this information is not available or will be entered at

a later time select the Configure Later check box to
continue.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-6-
 KIP System Installation Wizard

Network
Selecting the Network Icon will allow the installing Technician or Administrator to easily connect the KIP
Printer to the available network.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-7-
KIP System Installation Wizard

Selecting the “Obtain IP Address Automatically (Use

DHCP) will bring up the following window. DHCP is the
Default setting and just selecting the Right Arrow will
continue through the set up steps.

Selecting the Manual Entry button will allow the installing

tech or Admin to enter specific (static) network settings.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-8-
 KIP System Installation Wizard

Keycode
Keycode Entry allows the installing technician or Administrator to enter the keycodes for the purchased
options. Once entered all of the purchased options will be availbe for use on the KIP Printer.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
-9-
KIP System Installation Wizard

The Key Code Options Screen will display all of the

options available to the KIP Printer. All of the purchased
options will display a green check mark next to the
option once the keycodes have been entered.

Selecting the “Enter the New Keycode will open the on

screen keyboard for easy entry.

Once all of the code has been entered the Enter button
will turn green. The code entered will be validated
against the SYSTEM (Image Processing System in the KIP
and if valid will check all available options.

Note: When entering the keycodes there will be more than one code provided depending on what
options were purchased. All of the codes do not need to be entered in order to get the options, just
enter the last code before the code that begins with a $ (Color). This will activate all of the codes
available. Once this is done enter the $ codes to activate the color options.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 10 -
KIP System Installation Wizard

Toner Setup
Toner setup is availabl on the KIP 700M and 7100 KIP printers only. Selecting the the Toner Icon will open
the screen to start this process.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 11 -
KIP System Installation Wizard

Selecting the start button, will top off, and level the toner
within the developer unit. This process will take
approximately 20 minutes.

System will Re-boot when this process is complete.

This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. © 2011 KIP.
- 12 -
 U.S.A. ■ Phone: (800) 252-6793 ■ Email: [email protected] ■ Website: www.kip.com
CaNaDa  ■ Phone: (800) 653-7552 ■ Email: [email protected] ■ Website: www.kip.com
KIP is a registered trademark of the KIP Group. All other product names mentioned herein are trademarks of their respective companies.
All product features and specifications are subject to change without notice. Complete product specifications are available upon request.