Scribd
Upload
26 views3 pages

Module4Topic3 Worksheet

This module covers the use of reference points for vehicle navigation on roadways, including stopping, backing, turning, and lane positioning. It details the importance of vehicle reference points for different lane positions and how to align the vehicle correctly in relation to stop lines and curbs. Additionally, it highlights the blind zones around the vehicle that drivers should be aware of.

Uploaded by

George Moore
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
26 views3 pages

Module4Topic3 Worksheet

This module covers the use of reference points for vehicle navigation on roadways, including stopping, backing, turning, and lane positioning. It details the importance of vehicle reference points for different lane positions and how to align the vehicle correctly in relation to stop lines and curbs. Additionally, it highlights the blind zones around the vehicle that drivers should be aware of.

Uploaded by

George Moore
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Module 4: Topic 3

Reference Points and Lane Position


You will learn:
How to use reference points to navigate a
vehicle on a roadway
Reference points for backing, turning,
parking and changing or maintaining lane position

1. It is important to understand the front limitations for standard vehicle reference points.

● As the vehicle approaches the white stop line, the driver loses sight of the line

directly in front of the vehicle.

● The driver should look out the right front window and creep forward until the

white line appears to be under the passenger side mirror.

2. The stop line reference point helps direct the vehicle to a stop, with the nose of the

bumper positioned just over the beginning of the stop line.

3. For standard rear limitations, the driver aligns the rear bumper three to six inches

from a line or curb. The driver stops when the line or curb appears near the middle of

the rear right window when looking over the right shoulder.

4. Vehicle lane positions are also important when driving. Lane position one is used for

most driving and the vehicle is positioned in the center of the lane.

© Virginia Department of Education


5. Lane position two is used for left turns. The vehicle is positioned 3 to 6 inches from the

left line.

6. Lane position three is used for parking or turning right. The vehicle is positioned 3 to 6

inches from the right line or curb.

7. The standard vehicle reference points for lane position one are used to center the

vehicle in the lane. Line of sight should be over the right headlight to the curb.

8. The standard vehicle reference points for lane position two are used:

● for lane position for a left turn; and

● to determine the position for parking on the left side of a one-way street.

● Line of sight should be over the left headlight to the pavement marking or

median.

9. The standard vehicle reference points for lane position three are used

● for preparing to make a right-hand turn; and

● to determine the position for parking on the right side of the street.

● Line of sight to the curb should be over the center of the hood.

10. The vehicle footprint is the blind zone areas around your vehicle. This is the area of

pavement the driver cannot see while in the driver’s seat.

© Virginia Department of Education


© Virginia Department of Education

You might also like