Scribd
Upload
8 views2 pages

Schottky Barrier Rectifier MBR30100PT: Features

The MBR30100PT is a Schottky Barrier Rectifier designed for low voltage, high frequency applications, featuring low power loss and high efficiency. It has a peak repetitive reverse voltage of 100V and an average rectified forward current of 30A, with robust thermal and electrical characteristics. The product is not intended for specialized or hazardous applications and ISC disclaims any liability for its use in such contexts.

Uploaded by

Tayane Oliveira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views2 pages

Schottky Barrier Rectifier MBR30100PT: Features

The MBR30100PT is a Schottky Barrier Rectifier designed for low voltage, high frequency applications, featuring low power loss and high efficiency. It has a peak repetitive reverse voltage of 100V and an average rectified forward current of 30A, with robust thermal and electrical characteristics. The product is not intended for specialized or hazardous applications and ISC disclaims any liability for its use in such contexts.

Uploaded by

Tayane Oliveira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Schottky Barrier Rectifier MBR30100PT

FEATURES
·Plastic material used carriers Unerwriter Laboratory
·Metal silicon rectifier, majonty carrier conduction
·Low Power Loss,High Efficiency
·Guard ring for transient protection
·High Surge Capability,High Current Capability
·Minimum Lot-to-Lot variations for robust device
performance and reliable operation

APPLICATIONS
·For use in low voltage ,high frequency inverters,free wheeling and
polarity protection applications.

ABSOLUTE MAXIMUM RATINGS(Ta=25℃)

SYMBOL PARAMETER VALUE UNIT

VRRM Peak Repetitive Reverse Voltage


VRWM Working Peak Reverse Voltage 100 V
VR DC Blocking Voltage

VR(RMS) RMS Reverse Voltag 70 V

IF(AV) Average Rectified Forward Current 30 A

Nonrepetitive Peak Surge Current


IFSM 8.3ms single half sine-wave superimposed 250 A
on rated load conditions
Peak Repetitive Reverse Surge Current
IRRM 1.0 A
(20μs, 1.0kHz)

TJ Junction Temperature 150 ℃

Tstg Storage Temperature Range -65~175 ℃

dv/dt Voltage Rate of Change (Rated VR) 1000 V/μs

isc website：www.iscsemi.com 1 isc & iscsemi is registered trademark


Schottky Barrier Rectifier MBR30100PT

THERMAL CHARACTERISTICS

SYMBOL PARAMETER MAX UNIT

Rth j-c Thermal Resistance,Junction to Case 1.4 ℃/W

ELECTRICAL CHARACTERISTICS (Pulse Test: Pulse Width=300μs,Duty Cycle≤1%)

SYMBOL PARAMETER CONDITIONS MAX UNIT

IF= 15A ; Tc= 25℃ 0.85


VF Maximum Instantaneous Forward Voltage V
IF= 15A ; Tc= 125℃ 0.75

VR= VRWM;Tc= 25℃ 0.5


IR Maximum Instantaneous Reverse Current mA
VR= VRWM;Tc= 125℃ 10

NOTICE：
ISC reserves the rights to make changes of the content herein the datasheet at any time without
notification. The information contained herein is presented only as a guide for the applications of
our products.
ISC products are intended for usage in general electronic equipment. The products are not
designed for use in equipment which require specialized quality and/or reliability, or in equipment
which could have applications in hazardous environments, aerospace industry, or medical
field. Please contact us if you intend our products to be used in these special applications.
ISC makes no warranty or guarantee regarding the suitability of its products for any particular
purpose, nor does ISC assume any liability arising from the application or use of any products, and
specifically disclaims any and all liability, including without limitation special, consequential or
incidental damages.

isc website：www.iscsemi.com 2 isc & iscsemi is registered trademark

You might also like