The Intelligent Surveillance Solution

Hardware & Software NDVR

Installation Guide

Ver. 4.1.0.130130.00
Intelligent Surveillance Solution
Table of Contents
TABLE OF CONTENTS

TABLE OF CONTENTS .................................................................................................. 1

1000 SERIES; 3000 SERIES ........................................................................................... 2

Product Specification ........................................................................................... 2
System Requirement ............................................................................................. 2
Hardware Installation ............................................................................................ 3
Maximum I/O Cards support for G3-3016 ........................................................ 5

6000S/7000S SERIES .................................................................................................... 8

Product Specification ........................................................................................... 8
System Requirement ............................................................................................. 8
Hardware Installation .......................................................................................... 10
Maximum I/O Cards support for 6000S/7000S ............................................... 12

7100 SERIES ................................................................................................................ 13

Product Specification ......................................................................................... 13
System Requirement ........................................................................................... 13
Hardware Installation .......................................................................................... 14

8000HD SERIES........................................................................................................... 16
Product Specification ......................................................................................... 16
System Requirement ........................................................................................... 16
Hardware Installation .......................................................................................... 17

DRIVER INSTALLATION ............................................................................................. 19

SOFTWARE INSTALLATION ....................................................................................... 21

APPENDIX - MINIMUM HARDWARE REQUIREMENT ............................................ 39

page - 1
Intelligent Surveillance Solution

1000 SERIES; 3000 SERIES

Product Specification
Model 3000 Series 1000 Series
120fps(NTSC); 30fps(NTSC);
Display Rate
100fps (PAL) 25fps (PAL)
120fps(NTSC); 30fps(NTSC);
Recording Rate
100fps (PAL) 25fps (PAL)
Maximum Card 2 4
Video Input 4, 8, 16 4, 8
Audio Input 4 1
NTSC: 704x480 ; 640 x 480 ; 352x240
Video Resolution
PAL: 704x576 ; 640 x 576 ;352x288
Compression Format Software Compression MPEG 4

System Requirement

The system requirement depends on the number of camera connections

and the total bit rate of the IP cameras. Please refer Appendix - Minimum
Hardware Requirement or check NUUO Calculator on
http://support.nuuo.com/calculator/

Caution

 The electronic components within the unit are sensitive to

damage from Electro-Static Discharge (ESD). Please take
precautions at all times when handling the unit or its
sub-assemblies.
 Proper Surge solution is needed for outdoor application. It
provides protection from damaging transient voltage surges and
spikes.

page - 2
Intelligent Surveillance Solution

Hardware Installation

Step1: Insert the card onto an empty PCI slot. Connect the Audio/Video
Cable to the connector in the same color.
Note: You need to power down the PC before you insert the card.

Step 2: Turn on your PC and start Windows.

Step 3: Insert the included Software CD into CD-ROM.

Step 4: Refer the section Driver Installation on page 18 to install driver.

Step 5: After driver is installed, restart your PC.

Connect the Audio/Video Cable

Note: for G3-3000 series, audio channels are located at 1, 2, 3, 4.

Optional I/O Card: refer to the figures on the following pages.

Step 1: Fix the IO card onto your PC.

Step 2: Connect the Capture Card and the I/O Card with an included
ribbon cable (2.54mm IDC cable).
Note: The default configuration of blue slide switch on I/O Card as below.

page - 3
Intelligent Surveillance Solution

G3-3000 Series Capture Card

Connect to IO board
(2.54mm IDC cable)

I/O Card

Note: Please do not connect 2 capture cards in one IO board at the same
time.
page - 4
Intelligent Surveillance Solution

Maximum I/O Cards support for G3-3016

page - 5
Intelligent Surveillance Solution

G3-1000 Series Capture Card

Connect to IO board
(2.54mm IDC cable)

I/O Card

Note: Please do not connect 2 capture cards in one IO board at the same
time.
page - 6
Intelligent Surveillance Solution

G3-card Watchdog wire Installation

page - 7
Intelligent Surveillance Solution

6000S/7000S SERIES
Product Specification
Model 6016S 6008S 6004S
480fps(NTSC); 240fps(NTSC); 120fps(NTSC);
Display Rate
400fps (PAL) 200fps (PAL) 100fps (PAL)
Recording Rate 480fps(NTSC); 240fps(NTSC); 120fps(NTSC);
(CIF) 400fps (PAL) 200fps (PAL) 100fps (PAL)
Maximum Card 4 4 4
Video Input 16 8 4
Audio Input 16 8 4
NTSC: 176x120; 352x240; 704x480
Video Resolution
PAL: 176x144; 352x288; 704x576
Compression Format Hardware Compression H.264
7016S 7008S 7004S
480fps(NTSC); 240fps(NTSC); 120fps(NTSC);
Display Rate
400fps (PAL) 200fps (PAL) 100fps (PAL)
480fps(NTSC); 240fps(NTSC); 120fps(NTSC);
Recording Rate (D1)
400fps (PAL) 200fps (PAL) 100fps (PAL)
Maximum Card 4 4 4
Video Input 16 8 4
Audio Input 16 8 4
NTSC: 176x120; 352x240; 704x480
Video Resolution
PAL: 176x144; 352x288; 704x576
Compression Format Hardware Compression H.264

System Requirement

The system requirement depends on the number of camera connections

and the total bit rate of the IP cameras. Please refer Appendix - Minimum
Hardware Requirement or check NUUO Calculator on
http://support.nuuo.com/calculator/

page - 8
Intelligent Surveillance Solution

Caution

 The electronic components within the unit are sensitive to

damage from Electro-Static Discharge (ESD). Please take
precautions at all times when handling the unit or its
sub-assemblies.
 Proper Surge solution is needed for outdoor application. It
provides protection from damaging transient voltage surges and
spikes.

page - 9
Intelligent Surveillance Solution

Hardware Installation

Step1: Insert the card onto an empty PCI-e slot. Connect the Audio/Video
Cable to the connector.
Note 1: The audio input connectors are with red wires and marked of “A”
on them (such as “A1/9”); the video input connectors are with black wires
and marked of “V” (such as “V8/16”).
Note 2: You need to power down the PC before you insert the card.

Step 2: Connect the Watchdog wire to the reset connector on the main
board.
Note: With the Watchdog Wire connected, the system will be restarted if
any abnormal conditions.

Step 3: Turn on your PC and start Windows.

Step 3: Insert the included Software CD into CD-ROM.

Step 4: Refer the section Driver Installation on page 18 to install driver.

Step 5: After driver is installed, restart your PC.

Optional I/O Card: refer to the figures on the following pages.

Step 1: Fix the IO card onto your PC.

Step 2: Connect the Capture Card and the I/O Card with an included
ribbon cable (2.00mm IDC cable).
Note 1: The default configuration of blue slide switch on I/O Card as
below.
Note 2: If you only use one I/O card to connect with one of 6000S/7000S
cards, please make sure the configuration of the black slide switch as
below.

Maximum optional I/O Card support:

6000S/7000S can support maximum 4 I/O cards. Please refer to figures on
the following pages.
page - 10
Intelligent Surveillance Solution

6000S/7000S Series Capture Card

Connect to IO board
(2.00mm IDC cable)

I/O card

Note: Please do not connect 2 capture cards in one IO board at the same
time.
page - 11
Intelligent Surveillance Solution

Maximum I/O Cards support for 6000S/7000S

Note: If you use more than one IO card, please make sure the
configuration of each black switch as above.

page - 12
Intelligent Surveillance Solution

7100 SERIES
Product Specification

7116 7108
480fps(NTSC); 240fps(NTSC);
Display Rate
400fps (PAL) 200fps (PAL)
480fps(NTSC); 240fps(NTSC);
Recording Rate (D1)
400fps (PAL) 200fps (PAL)
Maximum Card 1 1
Video Input 16 8
Audio Input 16 8
NTSC: 176x120; 352x240; 704x480
Video Resolution
PAL: 176x144; 352x288; 704x576
w/ HDMI: RCA & HDMI: 10fps
TV Output Rate w/o HDMI: RCA: 25fps
Only HDMI: HDMI: 14fps
Compression Format Hardware Compression H.264

System Requirement

The system requirement is depend on the number of camera connections

and the total bit rate of the IP cameras. Please refer Appendix - Minimum
Hardware Requirement or check NUUO Calculator on
http://support.nuuo.com/calculator/

Caution

 The electronic components within the unit are sensitive to

damage from Electro-Static Discharge (ESD). Please take
precautions at all times when handling the unit or its
sub-assemblies.
 Proper Surge solution is needed for outdoor application. It
provides protection from damaging transient voltage surges and
spikes.

page -13
Intelligent Surveillance Solution

Hardware Installation

Step1: Insert the card onto an empty PCI-e slot. Connect the Audio/Video
Cable to the connector.
Note 1: The audio input connectors are with red wires and marked of “A”
on them (such as “A1/9”); the video input connectors are with black wires
and marked of “V” (such as “V8/16”).
Note 2: You need to power down the PC before you insert the card.

Step 2: Connect the Watchdog wire to the reset connector on the main
board.
Note: With the Watchdog Wire connected, the system will be restarted if
any abnormal conditions.

Step 3: Turn on your PC and start Windows.

Step 3: Insert the included Software CD into CD-ROM.

Step 4: Refer the section Driver Installation on page 18 to install driver.

Step 5: After driver is installed, restart your PC.

Optional I/O Card: refer to the figures on the following pages.

Step 1: Fix the IO card onto your PC.

Step 2: Connect the Capture Card and the I/O Card with an included
ribbon cable (2.54mm IDC cable).
Note 1: The default configuration of blue slide switch on I/O Card as
below.

Note 2: Before install SCB-7100 Series cards, please connect HDMI cable
first then it would be easier to fix the card onto the PCI-e slot.

Note 3: Some chassis may not be suitable for installing SCB-7100 series due
to the original design, please check the dimension of the chassis before
installing.

page - 14
Intelligent Surveillance Solution

7100 Series Capture Card

I/O card

Maximum I/O Cards support for 7116

Please refer to page 5 Maximum I/O Cards support for G3-3016

page - 15
Intelligent Surveillance Solution

8000HD SERIES
Product Specification
8004HD
120fps(NTSC);
Display Rate
100fps(PAL)
1080P@120(NTSC)
Recording Rate
1080P@100(PAL)
Maximum Card 4
Video Input 4
Audio Input 0
1080P30/25
Video Resolution
720P60/50/30/25
Compression Format Hardware Compression H.264

System Requirement

The system requirement is depend on the number of camera connections

and the total bit rate of the IP cameras. Please refer Appendix - Minimum
Hardware Requirement or check NUUO Calculator on
http://support.nuuo.com/calculator/

Caution

 The electronic components within the unit are sensitive to

damage from Electro-Static Discharge (ESD). Please take
precautions at all times when handling the unit or its
sub-assemblies.
 Proper Surge solution is needed for outdoor application. It
provides protection from damaging transient voltage surges and
spikes.

page - 16
Intelligent Surveillance Solution

Hardware Installation

Step1: Insert the card onto an empty PCI-e slot. Connect the BNC Cable
(not in product content) to the connector.
Note: You need to power down the PC before you insert the card.

Step 2: Connect the Watchdog wire to the reset connector on the main
board.
Note: With the Watchdog Wire connected, the system will be restarted if
any abnormal conditions.

Step 3: Turn on your PC and start Windows.

Step 3: Insert the included Software CD into CD-ROM.

Step 4: Refer the section Driver Installation on page 18 to install driver.

Step 5: After driver is installed, restart your PC.

Optional I/O Card: refer to the figures on the following pages.

Step 1: Fix the IO card onto your PC.

Step 2: Connect the Capture Card and the I/O Card with an included
ribbon cable (2.00mm IDC cable).
Note 1: The default configuration of blue slide switch on I/O Card as
below.
Note 2: If you only use one I/O card to connect with an 8004HD card,
please make sure the configuration of the black slide switch as below.

Maximum optional I/O Card support:

Please refer to page 11 Maximum I/O Cards support for 6000S/7000S

page -17
Intelligent Surveillance Solution

8004HD Card

Note: The default configuration of the black switch on 8004HD card is as

above. Do not adjust it.

I/O card

page - 18
Intelligent Surveillance Solution

DRIVER INSTALLATION

Step 1: Insert the Installation CD. Run autostartup.exe from the

CD-ROM directly to start the installation.

Step 2: Select “DVR Driver Installation” then click on it.

Step 3: In the NUUODriver Setup Wizard dialog box, click Next to

continuous.

Step 4: Check the “License agreement”. Click “I Agree” to continuous.

page - 19
Intelligent Surveillance Solution

Step 5: Installing NUUODriver.

Step 6: Click “Finish” after installing the system completely, and then
choose to reboot now or later.

page - 20
Intelligent Surveillance Solution

SOFTWARE INSTALLATION

Step 1: Insert the Installation CD. Run Autorun Tool from the CD-ROM
directly to start the installation.

Step 2: Select “Server Application Installation” then click on it.

Step 3: In the InstallShield Wizard dialog box, select language and click
Next to continuous.

Step 4: There are 2 Installation Mode of options in “Initiation Mode”

window, select one and click Next to start the installshield of Server
package.

page -21
Intelligent Surveillance Solution

Step 3: There are 4 system types of options in “System Setup Tool” window,
select one and click Next to start the installshield of Server
package.
- NUUO IP Surveillance System/Trial System
- NUUO MPEG-4 Hybrid System
- NUUO Full HD/D1 H.264 Hybrid System
Note: The Setup Tool will detect the type of capture cards installs
on PC and enable the options of system types automatically.

page - 22
Intelligent Surveillance Solution

Step 4: In the InstallShield Wizard dialog box, click Next to continuous.

Step 5: Check the option “I accept the terms of the license agreement”.
Click Next to continuous.

Step 6: Please enter your name and the company name for which you
work. Click Next to continuous.

page - 23
Intelligent Surveillance Solution

Step 7: Select “Complete Setup Type” or “Custom Setup Type” to install the
System.

COMPLETE SETUP TYPE

Install all program features into the default directory.
- Check the option “Complete”, and then click “Next”. All
program features will be installed. [Require the most disk
space.]

CUSTOM SETUP TYPE

Install the system to a preferred directory. Or select whichever
program feature(s) to install. This is recommended for advanced
users.
- Check the option “Custom”, and then click “Next”.
- Select appointed folder where setup will install files to. Click
“Change” to modify the installation directory.

page - 24
Intelligent Surveillance Solution

- Select the features setup will install. There are 4 features to

choose in the server setup process: MainConsole, Playback,
LiveView, Backup, and Verification tool. Click “Next” after
confirmation.

Step 8: Click install to start the installation.

Step 9: Click Finish after installing the system completely.

page - 25
Intelligent Surveillance Solution

Step 10: Execute the Main Console

Step 11: Enter the password you like into the edit box and enter again at
the edit of Password Confirm. And then press “OK”. Now enjoy our
Intelligent Surveillance Solution.

page - 26
Intelligent Surveillance Solution

SOFTWARE INSTALLATION – EXPRESS MODE

Step 1: Insert the Installation CD. Run Autorun Tool from the CD-ROM
directly to start the installation.

Step 2: Select “Server Application Installation” then click on it.

Step 3: There are 4 system types of options in “System Setup Tool” window,
select one and click Next to start the installshield of Server
package.
- NUUO IP Surveillance System/Trial System
- NUUO MPEG-4 Hybrid System
- NUUO Full HD/D1 H.264 Hybrid System
Note: The Setup Tool will detect the type of capture cards installs
on PC and enable the options of system types automatically.

page - 27
Intelligent Surveillance Solution

Step 4: In the InstallShield Wizard dialog box, select language and click
Next to continuous.
Step 5: There are 2 Installation Mode of options in “Initiation Mode”
window, select one and click Next to start the installshield of Server
package.

Step 6: Click install to start the installation.

page - 28
Intelligent Surveillance Solution

Step 7: Click Finish after installing the system completely.

Step 8: Execute the Main Console

Step 9: Enter the password you like into the edit box and enter again at the
edit of Password Confirm. And then press “OK”. Now enjoy our Intelligent
Surveillance Solution.

page - 29
Intelligent Surveillance Solution

SOFTWARE INSTALLATION – FAILOVER AGENT (STANDARD MODE)

Step 1: Insert the Installation CD. Run Autorun Tool from the CD-ROM
directly to start the installation.

Step 2: Select “Failover Agent Installation” then click on it.

Step 3: In the InstallShield Wizard dialog box, select language and click
Next to continuous.

Step 4: There are 2 Installation Mode of options in “Initiation Mode”

window, select one and click Next to start the installshield of Server
package.

page - 30
Intelligent Surveillance Solution

Step 5: In the InstallShield Wizard dialog box, click Next to continuous.

Step 6: Check the option “I accept the terms of the license agreement”.
Click Next to continuous.

Step 7: Please enter your name and the company name for which you
work. Click Next to continuous.

page - 31
Intelligent Surveillance Solution

Step 8: Select “Complete Setup Type” or “Custom Setup Type” to install the
System.

COMPLETE SETUP TYPE

Install all program features into the default directory.
- Check the option “Complete”, and then click “Next”. All
program features will be installed. [Require the most disk
space.]

CUSTOM SETUP TYPE

Install the system to a preferred directory. Or select whichever
program feature(s) to install. This is recommended for advanced
users.
- Check the option “Custom”, and then click “Next”.
- Select appointed folder where setup will install files to. Click
“Change” to modify the installation directory.

page - 32
Intelligent Surveillance Solution

- Select the features setup will install. Click “Next” after

confirmation.

Step 8: Click install to start the installation.

Step 9: Click Finish after installing the system completely.

page - 33
Intelligent Surveillance Solution

Step 10: Execute the Failover Agent

Step 9: Enter the password you like into the edit box and enter again at the
edit of Password Confirm. And then press “OK”. Now enjoy our Failover
Agent service.

page - 34
Intelligent Surveillance Solution

SOFTWARE INSTALLATION – FAILOVER AGENT (EXPRESS MODE)

Step 1: Insert the Installation CD. Run Autorun Tool from the CD-ROM
directly to start the installation.

Step 2: Select “Failover Agent Installation” then click on it.

Step 3: In the InstallShield Wizard dialog box, select language and click
Next to continuous.

Step 4: There are 2 Installation Mode of options in “Initiation Mode”

window, select one and click Next to start the installshield of Server
package.

page - 35
Intelligent Surveillance Solution

Step 5: Click install to start the installation.

Step 6: Click Finish after installing the system completely.

Step 7: Execute the Failover Agent

Step 8: Enter the password you like into the edit box and enter again at the
edit of Password Confirm. And then press “OK”. Now enjoy our Failover
Agent service.

page - 36
Intelligent Surveillance Solution

Note: When use Windows 8, please disable Metro function first before start
Mainconsole. For further steps, please refer to:
http://www.youtube.com/watch?v=xERxpbwBt0U

Note: When use Windows Server 2012, please enable desktop experience
first before start Mainconsole. For further steps, please refer to:
http://social.technet.microsoft.com/wiki/contents/articles/10531.windows
-server-8-beta-how-to-enable-desktop-experience-feature-en-us.aspx

the Desktop Experience feature in Windows Server 8 Beta belongs to User

Interfaces and Infrastructure feature. In order to install Desktop Experience
feature, do the following steps:

Open Server Manager > Manage > Add Roles and Features.

Before you begin to install a feature, you can read information in

the Before you begin page. This page is very useful for anyone who has
started learning Windows Server 8. Select Skip this page by default in order
to remove this page for the next times you add roles or features.

In the Select installation type page, you have two options:

1. Role-based or feature-based installation: this option that similar to the

one available in the Windows Server 2008 is used when you want to
add roles, features in single server.
2. Remote Desktop Services scenario-based installation this option allows
you to install, configure and manage RS session Host servers from a
central location.

In the Select destination server page, select the server pool under SERVER
POOL. With flexible server platform, now you can select a virtual hard disk
page - 37
Intelligent Surveillance Solution

as a destination server when deployed roles or features.

Skip the Select server roles page. In the Select features page, you can
select User Interfaces and infrastructure feature. You will be prompted to
install the required components or services “Ink and Handwriting Services”
and “Media Foundation”. Click Add Features.

In the Confirm installation selections page, select Restart the destination

server automatically if required. You must restart computer after installing
completely.

You have another way to add feature by using Powershell:

Add-WindowsFeature Desktop-Experience.

page - 38
Intelligent Surveillance Solution

APPENDIX - MINIMUM HARDWARE REQUIREMENT

This document is to illustrate the hardware requirement for NUUO DVR, NVR, and hybrid
system. The requirement specified in this document is the minimum requirement indicated
for the desire system.

Note:
1. Different chipset for motherboard and display card may have slightly different effect.
2. For detail Hardware Compatibility List, please refer
http://support.nuuo.com/mediawiki/index.php/Hardware_compatibility_list

H.264 Hardware Compression Card (SCB-8004HD/7100/7000S/6000S series)

32 ch 16 ch 8 ch 4 ch
Intel Core 2 DuoE5300(6000S/7000S/8000HD series)
CPU
Intel Core 2 QuadQ8400(7100 series)
RAM 2 GB
Intel P45 or P43 chip or above, MB vendor Asus,
Motherboard
Gigabyte or MSI with Intel Chipset recommended
ATI Radeon HD 4350 or above
Display card
(ATI Driver V11-5 recommended ATI Driver V10 not support)
Ethernet 100 baseT or above, gigabit LAN recommended
Hard Disk 250 GB or above
OS Windows XP (32-bit) / Windows 7 (32 and 64-bit) / Windows 2008 (64-bit)

MPEG-4 Software Compression Card (SCB-1000/3000 series)

SCB-3000s x 2 SCB-3000s SCB-1000

CPU Intel Core 2 DuoE5300

RAM 2 GB

Intel P45 or P43 chip or above, MB vendor Asus,

Motherboard
Gigabyte or MSI with Intel Chipset recommended
ATI Radeon HD 4350 or above
Display card
(ATI Driver V11-5 recommended ATI Driver V10 not support)
Ethernet 100 baseT or above, gigabit LAN recommended
Hard Disk 250 GB or above
OS Windows XP (32-bit) / Windows 7 (32 and 64-bit) / Windows 2008 (64-bit)

page -39
Intelligent Surveillance Solution

Pure IP NVR
D C B A
S of all cam.
2200~1400 1400~1050 1050~550 550~
Intel Core 2
Intel Core 2
CPU Intel Core I7 Intel Core I5 Duo
Quad Q9400
E5300
RAM 2 GB 2 GB 2 GB 1 GB
Intel 55 or 57 chip or above, MB Intel 35 or 33 chip or above, MB
Motherboard vendor Asus, Gigabyte or Intel with vendor Asus, Gigabyte or Intel
Intel Chipset recommended with Intel Chipset recommended
ATI Radeon HD 4350 or above
Display card
(ATI Driver V11-5 recommended ATI Driver V10 not support)
Ethernet 100 baseT or above, Gigabit LAN recommended
Hard Disk 250 GB or above
OS Windows XP (32-bit) / Windows 7 (32 and 64-bit) / Windows 2008 (64-bit)

Parameter definitions:
S= M*N
M: parameter of resolution of IP camera
Resolution 5M 3M 2M 1M VGA / D1 CIF
Value of M 37 27 22 14 3 1
N: FPS of Camera

For example: 8 channels system

a) 1 camera at 1 Mega-pixel resolution with 10FPS
b) 2 cameras at D1 resolution with 15FPS
c) 5 cameras at CIF resolution with 30FPS

a) M=14; N=10, S=14*10=140

b) M=3; N=15, S =3*15=45
c) M=1; N=30, S =1*30=30
S of All Cam. = 1*140+2*45+5*30=380
Therefore, the Minimum Hardware Requirement is A level.

page - 40
Intelligent Surveillance Solution

Hybrid System
D C B A
S of all cam.
2200~1400 1400~1050 1050~550 550~
Intel Core 2
Intel Core 2
CPU Intel Core I7 Intel Core I5 Duo
Quad Q9400
E5300
RAM 2 GB 2 GB 2 GB 1 GB
Intel 55 or 57 chip or above, MB Intel 35 or 33 chip or above, MB
Motherboard vendor Asus, Gigabyte or Intel with vendor Asus, Gigabyte or Intel
Intel Chipset recommended with Intel Chipset recommended
ATI Radeon HD 4350 or above
Display card
(ATI Driver V11-5 recommended ATI Driver V10 not support)
Ethernet 100 baseT or above, Gigabit LAN recommended
Hard Disk 250 GB or above
OS Windows XP (32-bit) / Windows 7 (32 and 64-bit) / Windows 2008 (64-bit)

Parameter definitions:
S= M*N + P
M: parameter of resolution of IP camera
Resolution 5M 3M 2M 1M VGA / D1 CIF
Value of M 37 27 22 14 3 1
N: FPS of Camera
P: parameter of NUUO compression card
Card SCB-3000 SCB-1000
Value of P 120 30

Card SCB-7016 SCB-7008 SCB-7004

Value of P 480 240 120

For example: 16 channels system

a) 1 camera at 1 Mega-pixel resolution with 10FPS
b) 2 cameras at D1 resolution with 15FPS
c) 5 cameras at CIF resolution with 30FPS
d) 8 cameras with 2pcs SCB-5004

a) M=14; N=10, S =14*10=140

b) M=3; N=15, S =3*15=45
c) M=1; N=30, S =1*30=30
d) P=60
S of All Cam.=1*140+2*45+5*30+2*60=500
Therefore, the Minimum Hardware Requirement is A level.

page - 41