CONCRETE COVER = 0.

075 MM (BELOW GROUND)

CONCRETE COVER = 0.05 MM (ABOVE GROUND)
FOR 20-MM DIAMETER
COMPRESSION BAR SPLICE LENGTH = 20D+150 = 20(20)+150 = 550 MM
BEND LENGTH FOR = 5.5D = 5.5(20) = 110 MM
FOR 16-MM DIAMETER
COMPRESSION BAR SPLICE LENGTH = 20D+150 = 20(16)+150 = 470 MM
BEND LENGTH FOR = 5.5D = 5.5(16) = 88 MM

TIE BEAM

STRAIGHT BARS
1B TO 1H: TOP BARS FROM 1B TO MID OF 1C-D
L = 0.11 + 5.04 - 0.075 + 3 + 0.275 = 8.35 M
TOP BARS FROM MID 1C-D TO MID OF 1E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS FROM MID OF 1E-F TO 1H
L = 0.275 + 3 + 6 - 0.075 + 0.11 = 9.31 M
BOTTOM BARS FROM 1B TO 1C-D
L = 5.04 + 0.3 + 1.2 + 0.275 + 0.11 - 0.075 = 6.85 M
BOTTOM BARS FROM 1C-D TO 1E-F
L = 6 + 6 + 1.2 + 0.3 - 1.2 - 0.3 + 0.55 = 12.55 M
BOTTOM BARS FROM 1E-F TO 1H
L = 6 + 6 - 0.3 - 1.2 + 0.275 - 0.075 + 0.11 = 10.81 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
8 PCS. 7.5 M BY 20 MM DIA. REBAR
8 PCS. 9 M BY 20 MM DIA. REBAR
8 PCS. 10.5 M BY 20 MM DIA. REBAR
8 PCS. 12 M BY 20 MM DIA. REBAR
16 PCS. 13.5 M BY 20 MM DIA. REBAR
2B TO 2H SAME SET OF REBARS AS THE FIRST ROW
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
 8 PCS. 7.5 M BY 20 MM DIA. REBAR
8 PCS. 9 M BY 20 MM DIA. REBAR
8 PCS. 10.5 M BY 20 MM DIA. REBAR
8 PCS. 12 M BY 20 MM DIA. REBAR
16 PCS. 13.5 M BY 20 MM DIA. REBAR
3A TO 3H TOP BARS FROM 3A TO 3C-D
L = 0.11 + 6.3 + 0.3 + 3 + 0.325 - 0.075 = 9.91 M
TOP BARS FROM 3C-D TO 3E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS FROM MID 3E-F TO 3H
L = 0.275 + 3 + 6 - 0.075 + 0.11 = 9.31 M
BOTTOM BARS FROM 3A TO 3C-D
L = 0.11 + 6.3 + 0.3 + 0.3 + 1.2 + 0.275 - 0.075 = 8.41 M
BOTTOM BARS FROM 3C-D TO 3E-F
L = 6 + 6 - 0.3 - 1.2 + 0.3 + 1.2 + 0.550 = 12.55 M
BOTTOM BARS FROM 3E-F TO 3H
L = 6 + 6 - 0.3 - 1.2 + 0.275 - 0.075 + 0.11 = 10.81 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
8 PCS. 9 M BY 20 MM DIA. REBARS
16 PCS. 10.5 M BY 20 MM DIA. REBARS
8 PCS. 12 M BY 20 MM DIA. REBARS
16 PCS. 13.5 M BY 20 MM DIA. REBARS
4A TO 4G TOP BARS FROM 4A TO 4C-D
L = 6.3 + 0.3 + 3 + 0.11 + 0.275 - 0.075 = 9.91 M
TOP BARS FROM 4C-D TO 4E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS FROM 4E-F TO 4G
L = 0.275 + 3 + 5.16 + 0.11 - 0.075 = 8.47 M
BOTTOM BARS 4A TO 4C-D
L = 0.11 + 6.3 + 0.3 + 0.3 + 1.2 + 0.275 - 0.075= 8.41 M
BOTTOM BARS FROM 4C-D TO 4E-F
L = 6 + 6 - 0.3 - 1.2 + 0.3 + 1.2 + 0.550 = 12.55 M
BOTTOM BARS FROM 4E-F TO 4G
L = 5.16 + 6 - 0.3 - 1.2 + 0.11 - 0.075 = 9.695 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS. 9 M BY 20 MM DIA. REBARS
16 PCS. 10.5 M BY 20 MM DIA. REBARS
16 PCS. 13.5 M BY 20 MM DIA. REBARS
5A TO 5G SAME SET OF REBARS AS FOURTH ROW
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS. 9 M BY 20 MM DIA. REBARS
16 PCS. 10.5 M BY 20 MM DIA. REBARS
16 PCS. 13.5 M BY 20 MM DIA. REBARS
1B TO 5A TOP BARS FROM 1B TO 2B-3A
L = 4.75 + 0.3 + (5.89/2) + 0.11 + 0.275 - 0.075 = 8.3046 M
TOP BARS FROM 2B-3A TO 3A-4A
L = (5.89/2) + 0.3 + 3 + 0.550 = 6.7946 M
TOP BARS FROM 3A-4A TO 5A
L = 3 + 5 + 0.275 + 0.11 - 0.075 = 8.31 M
 BOTTOM BARS 1B TO 3A-4A
L = 5.05 + 5.89 + 0.6 + 1.2 +0.275 + 0.11-0.075 = 13.0492 M
BOTTOM BARS FROM 3A-4A TO 5A
L = 6 - 0.3 - 1.2 + 5 + 0.275 + 0.11 - 0.075 = 9.81 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
8 PCS. 7.5 M BY 20 MM DIA. REBARS
16 PCS. 9 M BY 20 MM DIA. REBARS
8 PCS. 10.5 M BY 20 MM DIA. REBARS
8 PCS. 13.5 M BY 20 MM DIA. REBARS
2C TO 4C TOP BARS 2C TO 4C
L = 6.23 + 6 + 0.6 + 2(0.11) - 2(0.075) = 12.9 M
BOTTOM BARS 2C TO 4C
L = 6.23 + 6 + 0.6 + 2(0.11) - 2(0.075) = 12.9 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS. 13.5 M BY 20 MM DIA. REBARS
2D TO 4D SAME WITH 2C TO 4C
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS. 13.5 M BY 20 MM DIA. REBARS
2E TO 4E SAME WITH 2C TO 4C
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS.13.5 M BY 20 MM DIA. REBARS
2F TO 4F SAME WITH 2C TO 4C
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS.13.5 M BY 20 MM DIA. REBARS
1H TO 5G TOP BARS FROM 1H TO MID OF (2-3)H
L = 4.75 + (6.23/2) + 0.275 + 0.11 - 0.075 = 8.175M
TOP BARS FROM MID OF (2-3)H TO MID OF 3H-4G
L = (6.23/2) + 0.3 + (5.8892/2) + 0.550 = 6.9096 M
TOP BARS FROM MID OF 3H-4G TO 5G
L = 5 + 0.3 + 2.72875 + 0.275 + 0.11 - 0.075 = 8.33875 M
BOTTOM BARS 1H TO MID OF 3H-4G
L = 10.98 + 0.3 + 0.11 + 1.2 + 0.275 - 0.075 = 12.79 M
BOTTOM BARS 3H-4G TO 5G
L = 5 + 5.4575 - 1.2 + 0.275 + 0.11 - 0.075 = 9.5675 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
16 PCS.9 M BY 20 MM DIA. REBARS
8 PCS.7.5 M BY 20 MM DIA. REBARS
8 PCS.10.5 M BY 20 MM DIA. REBARS
8 PCS.13.5 M BY 20 MM DIA. REBARS
2FB1
STRAIGHT BARS
1B TO 1H TOP BARS 1B TO 1C-D
L = 0.25 + 4.79 + 3 + 0.275 + 0.11 - 0.05 = 8.375 M
TOP BARS 1C-D TO 1E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS 1E-F TO 1H
L = 3 + 6 + 0.275 + 0.11 - 0.05 = 9.335 M
BOTTOM BARS 1B TO 1C-D
L = 5.04 + 0.3 + 1.2 + 0.275 + 0.11 - 0.05 = 6.875 M
BOTTOM BARS FROM 1C-D TO 1E-F
L = 6 + 6 + 1.2 + 0.25 - 1.2 - 0.25 + 0.55 = 12.55 M
BOTTOM BARS FROM 1E-F TO 1H
L = 6 + 6 - 0.25 - 1.2 + 0.275 - 0.05 + 0.11 = 10.885 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
6 PCS. 7.5 M BY 20 MM DIA. REBAR
6 PCS. 9 M BY 20 MM DIA. REBAR
6 PCS. 10.5 M BY 20 MM DIA. REBAR
6 PCS. 12 M BY 20 MM DIA. REBAR
12 PCS. 13.5 M BY 20 MM DIA. REBAR
2B TO 2H SAME SET OF REBARS AS THE FIRST ROW
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
6 PCS. 7.5 M BY 20 MM DIA. REBAR
6 PCS. 9 M BY 20 MM DIA. REBAR
6 PCS. 10.5 M BY 20 MM DIA. REBAR
6 PCS. 12 M BY 20 MM DIA. REBAR
12 PCS. 13.5 M BY 20 MM DIA. REBAR
3A TO 3H TOP BARS 3A TO 3C-D
L = 6.10 + 0.25 + 3 + 0.11 + 0.275 - 0.05 = 9.685

TOP BARS 3C-D TO 3E-F

L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS 3E-F TO 3H
L = 0.275 + 3 + 6 - 0.05 + 0.11 = 9.335 M
BOTTOM BARS FROM 3A TO 3C-D
L = 0.11 + 6.10 + 0.5 + 1.2 + 0.275 - 0.05 = 8.135 M
BOTTOM BARS FROM 3C-D TO 3E-F
L = 6 + 6 - 0.25 - 1.2 + 0.25 + 1.2 + 0.550 = 12.55 M
BOTTOM BARS FROM 3E-F TO 3H
L = 6 + 6 - 0.25 - 1.2 + 0.275 - 0.05 + 0.11 = 10.885 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
6 PCS. 9 M BY 20 MM DIA. REBARS
12 PCS. 10.5 M BY 20 MM DIA. REBARS
6 PCS. 12 M BY 20 MM DIA. REBARS
12 PCS. 13.5 M BY 20 MM DIA. REBARS
4A TO 4G TOP BARS 4A TO 4C-D
L = 6.10 + 0.25 + 3 + 0.11 + 0.275 - 0.05 = 9.685 M
TOP BARS 4C-D TO 4E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS 4E-F TO 4H
 L = 0.275 + 3 + 5.16 - 0.05 + 0.11 = 8.495 M
BOTTOM BARS FROM 4A TO 4C-D
L = 0.11 + 6.10 + 0.5 + 1.2 + 0.275 - 0.05 = 8.135 M
BOTTOM BARS FROM 4C-D TO 4E-F
L = 6 + 6 - 0.25 - 1.2 + 0.25 + 1.2 + 0.550 = 12.55 M
BOTTOM BARS FROM 4E-F TO 4H
L = 6 + 5.16 - 0.25 - 1.2 + 0.275 - 0.05 + 0.11 = 10.045 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
12 PCS. 9 M BY 20 MM DIA. REBARS
12 PCS. 10.5 M BY 20 MM DIA. REBARS
12 PCS. 13.5 M BY 20 MM DIA. REBARS
5A TO 5G SAME WITH THE SET OF STEEL REBARS IN ROW 4
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
12 PCS. 9 M BY 20 MM DIA. REBARS
12 PCS. 10.5 M BY 20 MM DIA. REBARS
12 PCS. 13.5 M BY 20 MM DIA. REBARS
3A TO 5A TOP BARS 3A TO 5A
L = 0.25 + 6 + 5 + 1.35 + 2(0.11) - 2(0.05) = 12.72 M
BOTTOM BARS 3A TO 5A
L = 0.25 + 6 + 5 + 1.35 + 2(0.11) - 2(0.05) = 12.72 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
12 PCS. 13.5 M BY 20 MM DIA. REBARS
1B TO 3B TOP BARS 1B TO 3B
L = 4.75 + 6.23 + 0.15 + 2(0.11) - 2(0.05) = 11.25 M
BOTTOM BARS 1B TO 3B
L = 4.75 + 6.23 + 0.15 + 2(0.11) - 2(0.05) = 11.25 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
12 PCS. 12 M BY 20 MM DIA. REBARS
1C TO 5C TOP BARS 1C TO 2C-3C
L = 4.75 + (6.23/2) + 0.275 + 0.11 - 0.05 = 8.2 M
TOP BARS 2C-3C TO 3C-4C
L = (6.23/2) + 3 + 0.55 = 6.665 M
TOP BARS 3C-4C TO 5C
L = 3 + 5 + 1.35 + 0.275 + 0.11 - 0.05 = 9.685 M
BOTTOM BARS 1C TO 3C-4C
L = 10.98 + 0.25 + 1.2 + 0.275 + 0.11 - 0.05 = 12.765 M
BOTTOM BARS 3C-4C TO 5C
L = 11+ 1.35 - 0.25 - 1.2 + 0.275 + 0.11 - 0.05 = 11.235
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
6 PCS. 7.5 M BY 20 MM DIA. REBARS
6 PCS. 9 M BY 20 MM DIA. REBARS
6 PCS. 10.5 M BY 20 MM DIA. REBARS
6 PCS. 12 M BY 20 MM DIA. REBARS
6 PCS. 13.5 M BY 20 MM DIA. REBARS
1D TO 5D SAME WITH THE SET OF REINFORCEMENT IN 1C TO 5C
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
6 PCS. 7.5 M BY 20 MM DIA. REBARS
6 PCS. 9 M BY 20 MM DIA. REBARS
6 PCS. 10.5 M BY 20 MM DIA. REBARS
 6 PCS. 12 M BY 20 MM DIA. REBARS
6 PCS. 13.5 M BY 20 MM DIA. REBARS
1E TO 5E TOP BARS 1E TO 2E-3E
L = 4.75 + (6.23/2) + 0.275 + 0.11 - 0.05 = 8.2 M
TOP BARS 2E-3E TO 3E-4E
L = (6.23/2) + 3 + 0.55 = 6.665 M
TOP BARS 3E-4E TO 5E
L = 3 + 5 + 0.275 + 0.11 - 0.05 = 8.335 M
BOTTOM BARS 1C TO 3C-4C
L = 10.98 + 0.25 + 1.2 + 0.275 + 0.11 - 0.05 = 12.765 M
BOTTOM BARS 3C-4C TO 5C
L = 6 + 5 - 0.25 - 1.2 + 0.275 + 0.11 - 0.05 = 9.885
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
6 PCS. 7.5 M BY 20 MM DIA. REBARS
12 PCS. 9 M BY 20 MM DIA. REBARS
6 PCS. 10.5 M BY 20 MM DIA. REBARS
6 PCS. 13.5 M BY 20 MM DIA. REBARS
1F TO 5F SAME WITH THE SET OF REBARS IN 1E TO 5E
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
6 PCS. 7.5 M BY 20 MM DIA. REBARS
12 PCS. 9 M BY 20 MM DIA. REBARS
6 PCS. 10.5 M BY 20 MM DIA. REBARS
6 PCS. 13.5 M BY 20 MM DIA. REBARS
3G TO 5G TOP BARS 3G TO 5G
L = 6 + 5 + 0.15 + 2(0.11) - 2(0.05) = 11.27 M
BOTTOM BARS 3G TO 5G
L = 6 + 5 + 0.15 + 2(0.11) - 2(0.05) = 11.27 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
12 PCS. 12 M BY 20 MM DIA. REBARS
1H TO 3H TOP BARS
L = 4.75 + 6.23 + 0.25 + 2(0.11) - 2(0.05) = 11.35 M
BOTTOM BARS
L = 4.75 + 6.23 + 0.25 + 2(0.11) - 2(0.05) = 11.35 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
12 PCS. 12 M BY 20 MM DIA. REBARS

BENT UP BARS
1B TOP CUT BARS
L = (¼)(4.79 - 0.5) + 0.11 + 0.11 + 0.5 - 0.05 = 1.7425 M
1B - 1C BOTTOM CUT BARS
L = 4.79 - 0.5 - (⅖)(4.79 - 0.5) + 2(0.11) = 2.794 M
1C TOP CUT BARS
L = (¼)(4.79 - 0.5) + 0.5 + (¼)(6 - 0.5) + 2(0.11) = 3.1675 M
1C - 1D BOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
1D TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
1D - 1E BOTTOM BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
1E TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
1E - 1FBOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
1F TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
1F - 1H BOTTOM CUT BARS
L = 6 - 0.5 - 0.25 - (⅖)(6 - 0.5 - 0.25) + 2(0.11) = 3.37 M
1H TOP CUT BARS
L = (¼)(6 - 0.5 - 0.25) + 0.5 + 0.22 - 0.05 = 1.9825 M
QUANTITY OF REINFORCEMENT
6 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 13.5 M BY 20 MM DIA. REBARS
ROW 2 QUANTITY OF REINFORCEMENT
6 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 13.5 M BY 20 MM DIA. REBARS
3A TOP CUT BARS
L = (¼)(6.1 - 0.5) + 0.5 + 0.11 + 0.11 - 0.05 = 2.07 M
3A - 3C BOTTOM CUT BARS
L = 6.1 - 0.5 - (⅖)(6.1 - 0.5) + 2(0.11) = 3.58 M
3C TOP CUT BARS
L = (¼)(6.1 - 0.5) + 0.5 + (¼)(6 - 0.5) + 2(0.11) = 3.495 M
3C - 3D BOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
3E TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
3E - 3FBOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
3F TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
3F - 3H BOTTOM CUT BARS
L = 6 - 0.5 - 0.25 - (⅖)(6 - 0.5 - 0.25) + 2(0.11) = 3.37 M
3H TOP CUT BARS
L = (¼)(6 - 0.5 - 0.25) + 0.5 + 0.22 - 0.05 = 1.9825 M
QUANTITY OF REINFORCEMENT
5 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 12 M BY 20 MM DIA. REBARS
4A TOP CUT BARS
L = (¼)(6.1 - 0.5) + 0.5 + 0.11 + 0.11 - 0.05 = 2.07 M
4A - 4C BOTTOM CUT BARS
L = 6.1 - 0.5 - (⅖)(6.1 - 0.5) + 2(0.11) = 3.58 M
4C TOP CUT BARS
L = (¼)(6.1 - 0.5) + 0.5 + (¼)(6 - 0.5) + 2(0.11) = 3.495 M
4C - 4D BOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
4E TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
4E - 4FBOTTOM CUT BARS
 L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 3.52 M
4F TOP CUT BARS
L = 2(¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.47 M
4F - 4G BOTTOM CUT BARS
L = 5.16 - 0.25 - 0.5 - (⅖)(5.16 – 0.75) + 0.22 = 2.866 M
4G TOP CUT BARS
L = (¼)(5.16 - 0.75) + 0.22 + 0.5 - 0.05 = 1.7725 M
QUANTITY REINFORCEMENT
1 PC. 6 M BY 20 MM DIA. REBAR
4 PCS. 7.5 M BY 20 MM DIA. REBAR
2 PCS. 12 M BY 20 MM DIA. REBAR
ROW 5 QUANTITY REINFORCEMENT
1 PC. 6 M BY 20 MM DIA. REBAR
4 PCS. 7.5 M BY 20 MM DIA. REBAR
2 PCS. 12 M BY 20 MM DIA. REBAR
COLUMN A
3A TOP CUT BARS
L = (¼)(6 - 0.25 - 0.25) + 0.5 + 0.22 - 0.05 = 2.045 M
QUANTITY REINFORCEMENT
L = 2(2.045) = 4.09 M
1 PC. 6 M BY 20 MM DIA. REBAR
3A-4A, 3B-4B, 3C-4C, 3D-4D, 3E-4E, 3F-4F, & 3G-4G
BOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) +2(0.11) = 3.52 M
4A, 4B, 4C, 4D, 4E, 4F, & 4G
TOP CUT BARS
L = (¼)(6 - 0.5) + 0.5 + (¼)(5 - 0.75) + 2(0.11) = 3.1575 M
4A-5A, 4B-5B, 4C-5C, 4D-5D, 4E-5E, 4F-5F, & 4G-5G
BOTTOM CUT BARS
L = 5 - 0.75 - (⅖)(5 - 0.75) + 2(0.11) = 2.77 M
5A, 5B, 5C, 5D, 5E, 5F, & 5G
TOP CUT BARS
L = (¼)(5 - 0.75) + 0.5 + 2(0.11) - 0.05 + 1.35 = 3.0825 M
QUANTITY REINFORCEMENT
14 PCS. 7.5 M BY 20 MM DIA. REBAR
7 PCS. 12 M BY 20 MM DIA. REBAR
1B, 1C, 1D, 1E, 1F, & 1H
TOP CUT BARS
L = (¼)(4.75 - 0.75) + 0.5 + 2(0.11) - 0.05 = 1.67 M
1B-2B, 1C-2C, 1D-2D, 1E-2E, 1F-2F, & 1H-2H
BOTTOM CUT BARS
L = 4.75 - 0.75 - (⅖)(4.75 - 0.75) + 2(0.11) = 2.62 M
2B, 2C, 2D, 2E, 2F, & 2H
TOP CUT BARS
L = (¼)(4.75 - 0.75)+(¼)(6.23 - 0.5) + 0.22 + 0.5 = 3.1525 M
2B-3B, 2C-3C, 2D-3D, 2E-3E, 2F-3F, & 2H-3H
BOTTOM CUT BARS
L = 6.23 - 0.5 - (⅖)(6.23 - 0.5) + 2(0.11) = 3.658 M
3B TOP CUT BARS
 L = (¼)(6.23 - 0.5) + 0.3 + 2(0.11) - 0.05 = 1.9025 M
3C, 3D, 3E, & 3F
TOP CUT BARS
L = (¼)(6.23 - 0.5) + (¼)(6 - 0.5) + 0.5 + 2(0.11) = 3.5275 M
3H TOP CUT BARS
L = (¼)(6.23 - 0.5) + 0.5 + 0.11 - 0.05 = 1.9925 M
3G TOP CUT BARS
L = (¼)(6 - 0.5) + 0.3 + 2(0.11) - 0.05 = 1.845 M

QUANTITY REINFORCEMENT
2 PCS. 6 M BY 20 MM DIA. REBAR
10 PCS. 7.5 M BY 20 MM DIA. REBAR
6 PCS. 9 M BY 20 MM DIA. REBAR
3 PCS. 13.5 M BY 20 MM DIA. REBAR
2FB2

STRAIGHT BARS
BETWEEN ROW 2 AND ROW 3
TOP BARS (4-20 MM DIA.)
B TO C-D L = 0.25 + 4.79 + 3 + 0.275 + 0.11 - 0.05 = 8.375 M
C-D TO E-F L = 0.550 + 3 + 6 + 3 = 12.55 M
E-F TO H L = 3 + 6 + 0.275 + 0.11 - 0.05 = 9.335 M
STIFFENER BARS (1-16 MM DIA.)
B TO C-D L = 0.25 + 4.79 + 3 + 0.235 + 0.088 - 0.05 = 8.078 M
C-D TO E-F L = 0.470 + 3 + 6 + 3 = 12.47 M
E-F TO H L = 3 + 6 + 0.235 + 0.088 - 0.05 = 9.273 M
BOTTOM BARS (4 - 20 MM DIA.)
B TO C-D L = 4.79 + 0.3 + 1.2 + 0.275 + 0.11 - 0.05= 6.625 M
C-D TO E-F L = 6 + 6 + 0.550 = 12.55 M
E-F TO H L = 12 + 0.25 - 0.3 - 1.2 + 0.275 - 0.05 + 0.11 = 11.805 M
STIFFENER BARS (1-16 MM DIA.)
B TO C-D L = 5.04 + 0.3 + 1.2 + 0.275 + 0.088 - 0.05 = 6.875 M
C-D TO E-F L = 6 + 6 + 1.2 + 0.25 - 1.2 - 0.25 + 0.55 = 12.55 M
E-F TO H L = 6 + 6 - 0.25 - 1.2 + 0.275 - 0.05 + 0.088 = 10.885 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
4 PCS. 7.5 M BY 20 MM DIA. REBAR
4 PCS. 9 M BY 20 MM DIA. REBAR
4 PCS. 10.5 M BY 20 MM DIA. REBAR
4 PCS. 12 M BY 20 MM DIA. REBAR
8 PCS. 13.5 M BY 20 MM DIA. REBAR
1 PC. 7.5 M BY 16 MM DIA REBAR
1 PCS. 9 M BY 16 MM DIA. REBAR
1 PCS. 10.5 M BY 16 MM DIA. REBAR
1 PC. 12 M BY 16 MM DIA. REBAR
2 PCS. 13.5 M BY 16 MM DIA. REBAR
BETWEEN ROW 3 AND ROW 4
TOP BARS (4-20 MM DIA.)
A TO C-D L = 6.10 + 0.25 + 3 + 0.11 + 0.275 - 0.05 = 9.685 M
C-D TO E-F L = 0.550 + 3 + 6 + 3 = 12.55 M
E-F TO 3H L = 0.275 + 3 + 6 - 0.05 + 0.11 = 9.335 M
STIFFENER BARS (1-16 MM DIA)
A TO C-D L = 6.10 + 0.25 + 3 + 0.088 + 0.235 - 0.05 = 9.623 M
C-D TO E-F L = 0.470 + 3 + 6 + 3 = 12.47 M
E-F TO 3H L = 0.235 + 3 + 6 - 0.05 + 0.088 = 9.273 M
BOTTOM BARS (4-20 MM DIA.)
A TO 3C-D L = 0.11 + 6.10 + 0.5 + 1.2 + 0.275 - 0.05 = 8.135 M
C-D TO E-F L = 6 + 6 - 0.25 - 1.2 + 0.25 + 1.2 + 0.550 = 12.55 M
E-F TO H L = 6 + 6 - 0.25 - 1.2 + 0.275 - 0.05 + 0.11 = 10.885 M
STIFFENER BARS (1-16 MM DIA.)
A TO 3C-D L = 0.088 + 6.10 + 0.5 + 1.2 + 0.235 - 0.05 = 8.073 M
C-D TO E-F L = 6 + 6 - 0.25 - 1.2 + 0.25 + 1.2 + 0.470 = 12.47 M
E-F TO H L = 6 + 6 - 0.25 - 1.2 + 0.235 - 0.05 + 0.088 = 10.823 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
4 PCS. 9 M BY 20 MM DIA. REBAR
8 PCS. 10.5 M BY 20 MM DIA. REBAR
4 PCS. 12 M BY 20 MM DIA. REBAR
8 PCS. 13.5 M BY 20 MM DIA. REBAR
1 PCS. 9 M BY 16 MM DIA. REBAR
1 PCS. 10.5 M BY 16 MM DIA. REBAR
1 PC. 12 M BY 16 MM DIA. REBAR
3 PCS. 13.5 M BY 16 MM DIA. REBAR
BETWEEN COLUMN D AND COLUMN E
TOP BARS (4-20 MM DIA.)
L = 5 - 0.5 + 0.3 + 0.3 + 2(0.11) - 2(0.05) = 5.22 M
STIFFENER BARS (1-16MM DIA.)
L = 5 - 0.5 + 0.3 + 0.3 + 2(0.088) - 2(0.05) = 5.176 M
BOTTOM BARS (4-20 MM DIA)
L = 5 - 0.5 + 0.3 + 0.3 + 2(0.11) - 2(0.05) = 5.22 M
STIFFENER BARS (1-16 MM DIA.)
L = 5 - 0.5 + 0.3 + 0.3 + 2(0.088) - 2(0.05) = 5.176 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
8 PCS. 6 M BY 20 MM DIA. REBARS
 2 PCS. 6 M BY 16 MM DIA. REBARS

BENT UP BARS
BETWEEN ROW 2 AND 3
B TOP CUT BARS
L = (¼)(4.79 - 0.3) + 0.3 + 0.22- 0.05 = 1.5925 M
B - C BOTTOM CUT BARS
L = 4.79 - 0.3 - (⅖)(4.79 - 0.3) + 2(0.11) = 2.914 M
C TOP CUT BARS
L = (¼)(4.79 - 0.3) + 0.3 + (¼)(6.5. - 0.6) + 0.22 = 3.118 M
C-D&E-F
BOTTOM CUT BARS
L = 6 + 0.5 - 0.6 - (⅖)(6 + 0.5 - 0.6) + 2(0.11) = 3.76 M
D & E TOP CUT BARS
L = (¼)(6 + 0.50 - 0.6) + 0.3 + (¼)(6 - 0.5) + 0.22 = 3.37 M
D - E BOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 2.05 M
F TOP CUT BARS
L = (¼)(6 + 0.50 - 0.6) + 0.3 + (¼)(6 - 0.3) + 0.22 = 2.82 M
F - H BOTTOM CUT BARS
L = 6 - 0.3 - (⅖)(6 - 0.3) + 2(0.11) = 3.64 M
H TOP CUT BARS
L = (¼)(6 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.895 M
QUANTITY REINFORCEMENT
2 PCS. 9 M BY 20 MM DIA. REBAR
2 PCS. 10.5 M BY 20 MM DIA. REBAR
2 PCS. 13.5 M BY 20 MM DIA. REBAR
BETWEEN ROW 3 AND 4
A TOP CUT BARS
L = (¼)(6.1 + 0.25 - 0.3 - 0.25) + 0.3 + 0.22- 0.05 = 1.92 M
A - C BOTTOM CUT BARS
L = 6.1 - 0.3 - (⅖)(6.1 + 0.25 - 0.3 - 0.25) + 0.22 = 3.7 M
C TOP CUT BARS
L = (¼)(6.1 - 0.3) + 0.3 + (¼)(6.5 - 0.6) + 0.22 = 3.445 M
C-D&E-F
BOTTOM CUT BARS
L = 6 + 0.5 - 0.6 - (⅖)(6 + 0.5 - 0.6) + 2(0.11) = 3.76 M
D & E TOP CUT BARS
L = (¼)(6.5 - 0.6) + 0.3 + (¼)(6 - 0.5) + 0.22 = 3.37 M
D - E BOTTOM CUT BARS
L = 6 - 0.5 - (⅖)(6 - 0.5) + 2(0.11) = 2.05 M
F TOP CUT BARS
L = (¼)(6.5 - 0.6) + 0.3 + (¼)(6 - 0.3) + 0.22 = 2.82 M
F - H BOTTOM CUT BARS
L = 6 - 0.3 - (⅖)(6 - 0.3) + 2(0.11) = 3.64 M
H TOP CUT BARS
L = (¼)(6 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.895 M
QUANTITY REINFORCEMENT
 5 PCS. 7.5 M BY 20 MM DIA. REBAR
1 PC. 10.5 M BY 20 MM DIA. REBAR
2 PCS. 12 M BY 20 MM DIA. REBAR
BETWEEN COLUMN D AND COLUMN E
TOP CUT BARS
L = (¼)(5 - 0.25 + 0.25 - 0.3) + 0.3 + 0.22 - 0.05 = 1.645 M
BOTTOM CUT BARS
L = 5 - 0.3 - (⅖)(5 - 0.3) + 2(0.11) = 3.04 M
QUANTITY REINFORCEMENT
L = 4(1.645) + 2(3.04) = 12.66 M
1 PC. 13.5 M BY 20 MM DIA. REBAR
EB1

STRAIGHT BARS
FIRE EXIT TOP BARS (2-20 MM DIA.)
L = 2.13 - 2(0.05) + 2(0.11) = 2.25 M
BOTTOM BARS (2-20 MM DIA.)
L = 2.13 - 2(0.05) + 2(0.11) = 2.25 M
STIFFENER BARS (2-16 MM DIA.)
L = 2.13 - 2(0.05) + 2(0.088) = 2.206 M
QUANTITY OF REINFORCEMENT
L1 = 4(2.25) = 9 M
L2 = 2(2.206) = 4.412 M
TOTAL: 1 PC. 9 M BY 20 MM DIA. REBAR
1 PC. 6 M BY 20 MM DIA.REBAR
FRONT TOP BARS (2-20 MM DIA.)
L = 6.1 + 6 + 0.25 + 0.25 + 2(0.11) - 2(0.05) = 12.72 M
BOTTOM BARS (2-20 MM DIA.)
L = 6.1 + 6 + 0.25 + 0.25 + 2(0.11) - 2(0.05) = 12.72 M
STIFFENER BARS (2-16 MM DIA.)
L = 6.1 + 6 + 0.25 + 0.25 + 2(0.088) - 2(0.05) = 12.324 M
QUANTITY OF REINFORCEMENT
 4 PCS. 13.5 M BY 20 MM DIA. REBARS
2 PCS. 13.5 M BY 16 MM DIA. REBARS
FRONT STAIRS TOP BARS (2-20 MM DIA.)
L = 3.25 + 2(0.11) - 2(0.05) = 3.37 M
BOTTOM BARS (2-20 MM DIA.)
L = 3.25 + 2(0.11) - 2(0.05) = 3.37 M
STIFFENER BARS (2-16 MM DIA.)
L = 3.25 + 2(0.088) - 2(0.05) = 3.326 M
QUANTITY OF REINFORCEMENT
L1 = 4(3.37) = 13.48 M
L2 = 2(3.326) = 6.652 M
TOTAL: 1 PC. 13.5 M BY 20 MM DIA. REBAR
1 PC. 7.5 M BY 16 MM DIA. REBAR
COLUMN H TOP BARS (2-20 MM DIA.)
L = 3.25 + 0.15 + 2(0.11) - 2(0.05) = 3.52 M
BOTTOM BARS (2-20 MM DIA.)
L = 3.25 + 0.15 + 2(0.11) - 2(0.05) = 3.52 M
STIFFENER BARS (2-16 MM DIA.)
L = 3.25 + 0.15 + 2(0.088) - 2(0.05) = 3.476 M
QUANTITY OF REINFORCEMENT
L1 = 4(3.52) = 14.08 M
L2 = 2(3.476) = 6.952 M
TOTAL: 2 PCS. 7.5 M BY 20 MM DIA. REBAR
1 PC. 7.5 M BY 16 MM DIA. EBAR
FIRE EXIT TOP CUT BARS
L = (¼)(2.13 - 2(0.2)) + 0.20 + 2(0.11) - 0.05 = 0.8025 M
BOTTOM CUT BARS
L = 2.13 - 2(0.20) - (⅖)(2.13 - 2(0.20)) + 2(0.11) = 1.258 M
QUANTITY OF REINFORCEMENT
L1 = 4(0.8025) + 2(1.258) = 5.726 M
1 PC. 6 M BY 20 MM DIA. REBAR
FRONT
A TOP CUT BARS
L = (¼)(6.1 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.92 M
A - C BOTTOM CUT BARS
L = 6.1 - 0.3 - (⅖)(6.1 - 0.3) + 2(0.11) = 3.7 M
C TOP CUT BARS
L = (¼)(6.1 - 0.3) + 0.3 +(¼)(6.5 - 0.6) + 0.22 = 3.445 M
C - D BOTTOM CUT BARS
L = 6 + 0.5 - 0.6 - (⅖)(6 + 0.5 - 0.6) + 2(0.11) = 3.76 M
D TOP CUT BARS
L = (¼)(6 + 0.5 - 0.6) + 0.3 + 2(0.11) - 0.05 = 1.945 M
QUANTITY OF REINFORCEMENT
2 PCS. 7.5 M BY 20 MM DIA. REBARS
FRONT STAIRS
TOP CUT BARS
L = (¼)(3.25 - 2(0.20)) + 2(0.11) + 0.20 - 0.05 = 1.0825 M
BOTTOM CUT BARS
L = 3.25 - 2(0.20) - (⅖)(3.25 - 2(0.20)) +2(0.11) = 1.93 M
 QUANTITY OF REINFORCEMENT
L = 2(1.0825) + 1.93 = 4.095 M
1 PC. 6 M BY 20 MM DIA. REBAR
COLUMN H TOP CUT BARS
L = (¼)(3.25 - 0.25 - 0.15) + 0.5 + 2(0.11) - 0.05 = 1.3825 M
BOTTOM CUT BARS
L = 3 - 0.15 - (⅖)(3 - 0.15) + 2(0.11) = 1.93 M
QUANTITY OF REINFORCEMENT
L = 2(1.3825) + 1.93 = 4.695 M
1 PC. 6 M BY 20 MM DIA. REBAR
CB1

STRAIGHT BARS
FIRE EXIT TOP BARS (5-20 MM DIA.)
L1 = 2 + 0.3 + 2(0.11) - 2(0.05) = 2.42 M
L2 = 2 + 0.5 + 2(0.11) - 2(0.05) = 2.62 M
STIFFENER BARS (2-16 MM DIA.)
L1 = 2 + 0.3 + 2(0.088) - 2(0.05) = 2.376 M
L2 = 2 + 0.5 + 2(0.088) - 2(0.05) = 2.576 M
BOTTOM BARS (4-20 MM DIA.)
L1 = 2 + 0.3 + 2(0.11) - 2(0.05) = 2.42 M
L2 = 2 + 0.5 + 2(0.11) - 2(0.05) = 2.62 M
QUANTITY OF REINFORCEMENT
1 PC. 10.5 M BY 16 MM DIA. REBAR
2 PCS. 13.5 M BY 20 MM DIA. REBAR
2 PCS. 10.5 M BY 20 MM DIA. REBAR
FRONT STAIRS TOP BARS (5-20 MM DIA.)
L1 = 1.8 + 0.5 + 2(0.11) - 2(0.05) = 2.42 M
L2 = 1.8 + 0.3 + 2(0.11) - 2(0.05) = 2.22 M
STIFFENER BARS (2-16 MM DIA.)
L1 = 1.8 + 0.5 + 2(0.088) - 2(0.05) = 2.376 M
L2 = 2 + 0.3 + 2(0.088) - 2(0.05) = 2.176 M
BOTTOM BARS (4-20 MM DIA.)
L1 = 1.8 + 0.5 + 2(0.11) - 2(0.05) = 2.42 M
L2 = 1.8 + 0.3 + 2(0.11) - 2(0.05) = 2.22 M
QUANTITY OF REINFORCEMENT
1 PC. 10.5 M BY 16 MM DIA. REBAR
2 PCS. 10.5 M BY 20 MM DIA. REBARS
2 PCS. 13.5 M BY 20 MM DIA. REBARS
3FB1

STRAIGHT BARS
1B TO 1H
TOP BARS 1B TO 1C-D
L = 5.04 + 3 + 0.275 + 0.11 - 0.05 = 8.375 M
TOP BARS 1C-D TO 1E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP
BARS 1E-F TO 1H
L = 3 + 6 + 0.275 + 0.11 - 0.05 = 9.335 M
BOTTOM BARS 1B TO 1C-D
L = 5.04 + 0.2 + 1.1 + 0.275 + 0.11 - 0.05 = 6.675 M
BOTTOM BARS FROM 1C-D TO 1E-F
L = 6 + 6 + 1.1 + 0.20 - 1.1 - 0.20 + 0.55 = 12.55 M
BOTTOM BARS FROM 1E-F TO 1H
L = 6 + 6 - 0.20 - 1.1 + 0.275 - 0.05 + 0.11 = 11.035 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
5 PCS. 7.5 M BY 20 MM DIA. REBAR
5 PCS. 9 M BY 20 MM DIA. REBAR
5 PCS. 10.5 M BY 20 MM DIA. REBAR
5 PCS. 12 M BY 20 MM DIA. REBAR
10 PCS. 13.5 M BY 20 MM DIA. REBAR
2B TO 2H SAME SET OF REBARS AS THE FIRST ROW
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
5 PCS. 7.5 M BY 20 MM DIA. REBAR
5 PCS. 9 M BY 20 MM DIA. REBAR
5 PCS. 10.5 M BY 20 MM DIA. REBAR
5 PCS. 12 M BY 20 MM DIA. REBAR
10 PCS. 13.5 M BY 20 MM DIA. REBAR
3A TO 3H TOP BARS 3A TO 3C-D
L = 6.10 + 0.20 + 3 + 0.11 + 0.275 - 0.05 = 9.635 M
TOP BARS 3C-D TO 3E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS 3E-F TO 3H
L = 0.275 + 3 + 6 - 0.05 + 0.11 = 9.335 M
BOTTOM BARS FROM 3A TO 3C-D
L = 0.11 + 6.10 + 0.4 + 1.1 + 0.275 - 0.05 = 7.935 M
BOTTOM BARS FROM 3C-D TO 3E-F
L = 6 + 6 - 0.20 - 1.1 + 0.20 + 1.1 + 0.550 = 12.55 M
 BOTTOM BARS FROM 3E-F TO 3H
L = 6 + 6 - 0.20 - 1.1 + 0.275 - 0.05 + 0.11 = 11.035 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
5 PCS. 9 M BY 20 MM DIA. REBARS
10 PCS. 10.5 M BY 20 MM DIA. REBARS
5 PCS. 12 M BY 20 MM DIA. REBARS
10 PCS. 13.5 M BY 20 MM DIA. REBARS
4A TO 4G TOP BARS 4A TO 4C-D
L = 6.10 + 0.20 + 3 + 0.11 + 0.275 - 0.05 = 9.635 M
TOP BARS 4C-D TO 4E-F
L = 0.550 + 3 + 6 + 3 = 12.55 M
TOP BARS 4E-F TO 4H
L = 0.275 + 3 + 5.16 - 0.05 + 0.11 = 8.495 M
BOTTOM BARS FROM 4A TO 4C-D
L = 0.11 + 6.10 + 0.4 + 1.1 + 0.275 - 0.05 = 7.935 M
BOTTOM BARS FROM 4C-D TO 4E-F
L = 6 + 6 - 0.20 - 1.1 + 0.20 + 1.1 + 0.550 = 12.55 M
BOTTOM BARS FROM 4E-F TO 4H
L = 6 + 5.16 - 0.20 - 1.1 + 0.275 - 0.05 + 0.11 = 10.195 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
10 PCS. 9 M BY 20 MM DIA. REBARS
10 PCS. 10.5 M BY 20 MM DIA. REBARS
10 PCS. 13.5 M BY 20 MM DIA. REBARS
5A TO 5G SAME WITH THE SET OF STEEL REBARS IN ROW 4
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
10 PCS. 9 M BY 20 MM DIA. REBARS
10 PCS. 10.5 M BY 20 MM DIA. REBARS
10 PCS. 13.5 M BY 20 MM DIA. REBARS
3A TO 5A TOP BARS 3A TO 5A
L = 0.20 + 6 + 5 + 1.35 + 2(0.11) - 2(0.05) = 12.67 M
BOTTOM BARS 3A TO 5A
L = 0.20 + 6 + 5 + 1.35 + 2(0.11) - 2(0.05) = 12.67 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
10 PCS. 13.5 M BY 20 MM DIA. REBARS
1B TO 3B TOP BARS 1B TO 3B
L = 4.75 + 6.23 + 0.15 + 2(0.11) - 2(0.05) = 11.25 M
BOTTOM BARS 1B TO 3B
L = 4.75 + 6.23 + 0.15 + 2(0.11) - 2(0.05) = 11.25 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
10 PCS. 12 M BY 20 MM DIA. REBARS
1C TO 5C TOP BARS 1C TO 2C-3C
L = 4.75 + (6.23/2) + 0.275 + 0.11 - 0.05 = 8.2 M
TOP BARS 2C-3C TO 3C-4C
L = (6.23/2) + 3 + 0.55 = 6.665 M
TOP BARS 3C-4C TO 5C
L = 3 + 5 + 1.35 + 0.275 + 0.11 - 0.05 = 9.685 M
BOTTOM BARS 1C TO 3C-4C
L = 10.98 + 0.20 + 1.1 + 0.275 + 0.11 - 0.05 = 12.615 M
BOTTOM BARS 3C-4C TO 5C
 L = 11 + 1.35 - 0.20 - 1.1 + 0.275 + 0.11 - 0.05 = 11.385 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
5 PCS. 7.5 M BY 20 MM DIA. REBARS
5 PCS. 9 M BY 20 MM DIA. REBARS
5 PCS. 10.5 M BY 20 MM DIA. REBARS
5 PCS. 12 M BY 20 MM DIA. REBARS
5 PCS. 13.5 M BY 20 MM DIA. REBARS
1D TO 5D SAME WITH THE SET OF REINFORCEMENT IN 1C TO 5C
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
5 PCS. 7.5 M BY 20 MM DIA. REBARS
5 PCS. 9 M BY 20 MM DIA. REBARS
5 PCS. 10.5 M BY 20 MM DIA. REBARS
5 PCS. 12 M BY 20 MM DIA. REBARS
5 PCS. 13.5 M BY 20 MM DIA. REBARS
1E TO 5E TOP BARS 1E TO 2E-3E
L = 4.75 + (6.23/2) + 0.275 + 0.11 - 0.05 = 8.2 M
TOP BARS 2E-3E TO 3E-4E
L = (6.23/2) + 3 + 0.55 = 6.665 M
TOP BARS 3E-4E TO 5E
L = 3 + 5 + 2 + 0.275 + 0.11 - 0.05 = 10.335 M
BOTTOM BARS 1E TO 3E-4E
L = 10.98 + 0.20 + 1.1 + 0.275 + 0.11 - 0.05 = 12.615 M
BOTTOM BARS 3E-4E TO 5E
L = 6 + 5 +2 - 0.20 - 1.1 + 0.275 + 0.11 - 0.05 = 12.035 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
5 PCS. 7.5 M BY 20 MM DIA. REBARS
5 PCS. 9 M BY 20 MM DIA. REBARS
5 PCS. 10.5 M BY 20 MM DIA. REBARS
10 PCS. 13.5 M BY 20 MM DIA. REBARS
1F TO 5F SAME WITH THE SET OF REBARS IN 1E TO 5E
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
5 PCS. 7.5 M BY 20 MM DIA. REBARS
5 PCS. 9 M BY 20 MM DIA. REBARS
5 PCS. 10.5 M BY 20 MM DIA. REBARS
10 PCS. 13.5 M BY 20 MM DIA. REBARS
3G TO 5G TOP BARS 3G TO 5G
L = 6 + 5 + 2 + 0.15 + 2(0.11) - 2(0.05) = 13.27 M
BOTTOM BARS 3G TO 5G
L = 6 + 5 + 2 + 0.15 + 2(0.11) - 2(0.05) = 13.27 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
10 PCS. 13.5 M BY 20 MM DIA. REBARS
1H TO 3H TOP BARS
L = 4.75 + 6.23 + 0.20 + 2(0.11) - 2(0.05) = 11.30 M
BOTTOM BARS
L = 4.75 + 6.23 + 0.20 + 2(0.11) - 2(0.05) = 11.30 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
10 PCS. 12 M BY 20 MM DIA. REBARS
BENT UP BARS
1B TOP CUT BARS
 L = (¼)(5.04 - 0.6) + 0.11 + 0.11 + 0.5 - 0.05 = 1.88 M
1B - 1C BOTTOM CUT BARS
L = 5.04 - 0.6 - (⅖)(5.04 - 0.6) + 2(0.11) = 2.884 M
1C TOP CUT BARS
L = (¼)(5.04 - 0.6) + 0.4 + (¼)(6 - 0.4) + 2(0.11) = 3.13 M
1C - 1D, 1D - 1E, & 1E - 1F
BOTTOM CUT BARS
L = 6 - 0.4 - (⅖)(6 - 0.4) + 2(0.11) = 3.58 M
1D, 1E, & 1F
TOP CUT BARS
L = 2(¼)(6 - 0.4) + 0.4 + 2(0.11) = 3.42 M
1F - 1H BOTTOM CUT BARS
L = 6 - 0.6 - (⅖)(6 -0.6) + 2(0.11) = 3.46 M
1H TOP CUT BARS
L = (¼)(6 -0.6) + 0.4 + 0.11 + 0.11 - 0.05 = 1.92 M
QUANTITY OF REINFORCEMENT
6 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 10.5 M BY 20 MM DIA. REBAR
2 PCS. 13.5 M BY 20 MM DIA. REBARS

ROW 2 QUANTITY OF REINFORCEMENT

6 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 10.5 M BY 20 MM DIA. REBAR
2 PCS. 13.5 M BY 20 MM DIA. REBARS
3A TOP CUT BARS
L = (¼)(6.1 - 0.4) + 0.4 + 0.11 + 0.11 - 0.05 = 1.995 M
3A - 3C BOTTOM CUT BARS
L = 6.1 - 0.4 - (⅖)(6.1 - 0.4) + 2(0.11) = 3.64 M
3C TOP CUT BARS
L = (¼)(6.1 - 0.4) + 0.4 + (¼)(6 - 0.4) + 2(0.11) = 3.445 M
3C - 3D, 3D - 3E, & 3E - 3F
BOTTOM CUT BARS
L = 6 - 0.4 - (⅖)(6 - 0.4) + 2(0.11) = 3.58 M
3D, 3E ,& 3F
TOP CUT BARS
L = 2(¼)(6 - 0.4) + 0.4 + 2(0.11) = 3.42 M
3F - 3H BOTTOM CUT BARS
L = 6 - 0.6 - (⅖)(6 - 0.6) + 2(0.11) = 3.46 M
3H TOP CUT BARS
L = (¼)(6 - 0.6) + 0.4 + 0.11 + 0.11 - 0.05 = 1.92 M
QUANTITY OF REINFORCEMENT
3 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 10.5 M BY 20 MM DIA. REBARS
2 PCS. 12 M BY 20 MM DIA. REBARS
ROW 4 QUANTITY OF REINFORCEMENT
3 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 10.5 M BY 20 MM DIA. REBARS
2 PCS. 12 M BY 20 MM DIA. REBARS
ROW 5 QUANTITY REINFORCEMENT
 3 PCS. 7.5 M BY 20 MM DIA. REBARS
2 PCS. 10.5 M BY 20 MM DIA. REBARS
2 PCS. 12 M BY 20 MM DIA. REBARS
COLUMN A
3A TOP CUT BARS
L = (¼)(6 - 0.4) + 0.4 + 0.11 + 0.11 - 0.05 = 1.97 M
3A-4A, 3B-4B, 3C-4C, 3D-4D, 3E-4E, 3F-4F, & 3G-4G
BOTTOM CUT BARS
L = 6 - 0.4 - (⅖)(6 - 0.4) +2(0.11) = 3.58 M
4A, 4B, 4C, 4D, 4E, 4F, & 4G
TOP CUT BARS
L = (¼)(6 - 0.4) + 0.4 + (¼)(5 - 0.6) + 2(0.11) = 3.12 M
4A-5A, 4B-5B, 4C-5C, 4D-5D, 4E-5E, 4F-5F, & 4G-5G
BOTTOM CUT BARS
L = 5 - 0.6 - (⅖)(5 - 0.6) + 2(0.11) = 2.86 M

5A, 5C, & 5D

TOP CUT BARS
L = (¼)(5 - 0.6) + 0.4 + 2(0.11) - 0.05 + 1.35 = 3.02 M
5E, 5F, & 5G
TOP CUT BARS
L = (¼)(5 - 0.6) + 0.4 + 2(0.11) - 0.05 + 2 = 3.67 M
QUANTITY REINFORCEMENT
1 PC. 6 M BY 20 MM DIA. REBAR
14 PCS. 6 M BY 20 MM DIA. REBAR
7 PCS. 7.5 M BY 20 MM DIA. REBAR
3 PCS. 13.5 M BY 20 MM DIA. REBAR
1B, 1C, 1D, 1E, 1F, & 1H
TOP CUT BARS
L = (¼)(4.75 - 0.6) + 0.4 + 2(0.11) - 0.05 = 1.6075 M
1B-2B, 1C-2C, 1D-2D, 1E-2E, 1F-2F, & 1H-2H
BOTTOM CUT BARS
L = 4.75 - 0.6 - (⅖)(4.75 - 0.6) + 2(0.11) = 2.71 M
2B, 2C, 2D, 2E, 2F, & 2H
TOP CUT BARS
L = (¼)(4.75 - 0.6) + (¼)(6.23 - 0.4) + 0.22 + 0.4 = 3.115 M
2B-3B, 2C-3C, 2D-3D, 2E-3E, 2F-3F, & 2H-3H
BOTTOM CUT BARS
L = 6.23 - 0.4 - (⅖)(6.23 - 0.4) + 2(0.11) = 3.69 M
3B TOP CUT BARS
L = (¼)(6.23 - 0.4) + 0.3+ 2(0.11) - 0.05 = 1.9275 M
3C, 3D, 3E, & 3F
TOP CUT BARS
L = (¼)(6.23 - 0.4) + (¼)(6 - 0.4) + 0.4 + 2(0.11) = 3.4775 M
3H TOP CUT BARS
L = (¼)(6.23 - 0.4) + 0.4 + 0.11 - 0.05 = 1.9175 M
3G TOP CUT BARS
L = (¼)(6 - 0.4) + 0.3 + 2(0.11) - 0.05 = 1.87 M
QUANTITY REINFORCEMENT
 6 PCS. 7.5 M BY 20 MM DIA. REBAR
6 PCS. 9 M BY 20 MM DIA. REBAR
1 PC. 12 M BY 20 MM DIA. REBAR
3 PCS. 13.5 M BY 20 MM DIA. REBAR
3FB2

STRAIGHT BARS
BETWEEN ROW 2 AND ROW 3
TOP BARS (3-20 MM DIA.)
B TO C-D L = 5.04 + 3 + 0.275 + 0.11 - 0.05 = 8.375 M
C-D TO E-F L = 0.550 + 3 + 6 + 3 = 12.55 M
E-F TO H L = 3 + 6 + 0.275 + 0.11 - 0.05 = 9.335 M
STIFFENER BARS (1-16 MM DIA.)
B TO C-D L = 5.04 + 3 + 0.235 + 0.088 - 0.05 = 8.078 M
C-D TO E-F L = 0.470 + 3 + 6 + 3 = 12.47 M
E-F TO H L = 3 + 6 + 0.235 + 0.088 - 0.05 = 9.273 M
BOTTOM BARS (3 - 20 MM DIA.)
B TO C-D L = 5.04 - 0.20 + 0.3 + 1 + 0.275 + 0.11 - 0.05= 6.475 M
C-D TO E-F L = 12 + 0.550 = 12.55 M
E-F TO H L = 12 + 0.20 - 0.3 - 1 + 0.275 - 0.05 + 0.11 = 11.235 M
STIFFENER BARS (1-16 MM DIA.)
B TO C-D L = 5.04 + 0.3 + 1 + 0.275 + 0.088 - 0.05 = 6.653 M
C-D TO E-F L = 6 + 6 + 1 + 0.20 - 1 - 0.20 + 0.55 = 12.55 M
E-F TO H L = 6 + 6 - 0.20 - 1 + 0.275 - 0.05 + 0.088 = 11.113 M
QUANTITY OF REINFORCEMENT
4 PCS. 7.5 M BY 20 MM DIA. REBAR
4 PCS. 9 M BY 20 MM DIA. REBAR
4 PCS. 10.5 M BY 20 MM DIA. REBAR
4 PCS. 12 M BY 20 MM DIA. REBAR
8 PCS. 13.5 M BY 20 MM DIA. REBAR
1 PC. 7.5 M BY 16 MM DIA REBAR
1 PCS. 9 M BY 16 MM DIA. REBAR
 1 PCS. 10.5 M BY 16 MM DIA. REBAR
1 PC. 12 M BY 16 MM DIA. REBAR
2 PCS. 13.5 M BY 16 MM DIA. REBAR

BETWEEN ROW 3 AND ROW 4

TOP BARS (4-20 MM DIA.)
A TO C-D L = 6.10 + 0.20 + 3 + 0.11 + 0.275 - 0.05 = 9.635 M
C-D TO E-F L = 0.550 + 3 + 6 + 3 = 12.55 M
E-F TO 3H L = 0.275 + 3 + 6 - 0.05 + 0.11 = 9.335 M
STIFFENER BARS (1-16 MM DIA)
A TO C-D L = 6.10 + 0.20 + 3 + 0.088 + 0.235 - 0.05 = 9.573 M
C-D TO E-F L = 0.470 + 3 + 6 + 3 = 12.47 M
E-F TO 3H L = 0.235 + 3 + 6 - 0.05 + 0.088 = 9.273 M
BOTTOM BARS (4-20 MM DIA.)
A TO 3C-D L = 0.11 + 6.10 + 0.20 + 0.20 + 1 + 0.275 - 0.05 = 7.835 M
C-D TO E-F L = 6 + 6 - 0.20 - 1 + 0.20 + 1 + 0.550 = 12.55 M
E-F TO H L = 6 + 6 - 0.20 - 1 + 0.275 - 0.05 + 0.11 = 11.135 M
STIFFENER BARS (1-16 MM DIA.)
A TO 3C-D L = 0.088 + 6.10 + 0.20 + 0.20 + 1 + 0.235 - 0.05 = 7.773 M
C-D TO E-F L = 6 + 6 - 0.2 - 1 + 0.20 + 1 + 0.470 = 12.47 M
E-F TO H L = 6 + 6 - 0.20 - 1 + 0.235 - 0.05 + 0.088 = 11.073 M
QUANTITY OF REINFORCEMENT
4 PCS. 9 M BY 20 MM DIA. REBAR
8 PCS. 10.5 M BY 20 MM DIA. REBAR
4 PCS. 12 M BY 20 MM DIA. REBAR
8 PCS. 13.5 M BY 20 MM DIA. REBAR
1 PCS. 9 M BY 16 MM DIA. REBAR
1 PCS. 10.5 M BY 16 MM DIA. REBAR
1 PC. 12 M BY 16 MM DIA. REBAR
3 PCS. 13.5 M BY 16 MM DIA. REBAR
BETWEEN COLUMN D AND COLUMN E
TOP BARS (4-20 MM DIA.)
L = 5 - 0.4 + 0.3 + 0.3 + 2(0.11) - 2(0.05) = 5.32 M
STIFFENER BARS (1-16MM DIA.)
L = 5 - 0.4+ 0.3 + 0.3 + 2(0.088) - 2(0.05) = 5.276 M
BOTTOM BARS (4-20 MM DIA)
L = 5 - 0.4 + 0.3 + 0.3 + 2(0.11) - 2(0.05) = 5.32 M
STIFFENER BARS (1-16 MM DIA.)
L = 5 - 0.4 + 0.3 + 0.3 + 2(0.088) - 2(0.05) = 5.276 M
QUANTITY OF REINFORCEMENT
8 PCS. 6 M BY 20 MM DIA. REBARS
2 PCS. 6 M BY 16 MM DIA. REBARS

BENT UP BARS
BETWEEN ROW 2 AND 3
B TOP CUT BARS
L = (¼)(4.79 - 0.3) + 0.3 + 0.22 - 0.05 = 1.5925 M
B - C BOTTOM CUT BARS
L = 4.79 - 0.3 - (⅖)(4.79 - 0.3) + 2(0.11) = 2.914 M
C TOP CUT BARS
L = (¼)(4.79 - 0.3) + 0.3 + (¼)(6 - 0.20) + 0.22= 3.0925 M
C-D&E-F
BOTTOM CUT BARS
L = 6 + 0.4 - 0.6 - (⅖)(6 + 0.4 - 0.6) + 2(0.11) = 3.7 M
D & E TOP CUT BARS
L = (¼)(6 + 0.4 - 0.6) + 0.3 + (¼)(6 - 0.4) + 0.22 = 3.37 M
D - E BOTTOM CUT BARS
L = 6 - 0.4 - (⅖)(6 - 0.4) + 2(0.11) = 3.58 M
F TOP CUT BARS
L = (¼)(6 + 0.4 - 0.6) + 0.3 + (¼)(6 - 0.3) + 0.22 = 3.395 M
F - H BOTTOM CUT BARS
L = 6 - 0.3 - (⅖)(6 - 0.3) + 2(0.11) = 3.64 M
H TOP CUT BARS
L = (¼)(6 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.895 M
QUANTITY REINFORCEMENT
4 PCS. 7.5 M BY 20 MM DIA. REBAR
2 PCS. 10.5 M BY 20 MM DIA. REBAR
2 PCS. 13.5 M BY 20 MM DIA. REBAR
BETWEEN ROW 3 AND 4
A TOP CUT BARS
L = (¼)(6.1 + 0.2 - 0.3 - 0.2) + 0.3 + 0.22 - 0.05 = 1.92 M
A - C BOTTOM CUT BARS
L = 6.1 - 0.3 - (⅖)(6.1 + 0.2 - 0.3 - 0.2) + 2(0.11) = 3.7 M
C TOP CUT BARS
L = (¼)(6.1 - 0.3) + 0.3 + (¼)(6 – 0.2) + 0.22 = 3.42 M
C-D & E-F BOTTOM CUT BARS
L = 6 + 0.4 - 0.6 - (⅖)(6 + 0.4 - 0.6) + 2(0.11) = 3.7 M
D & E TOP CUT BARS
L = (¼)(6 + 0.4 - 0.6) + 0.3 + (¼)(6 - 0.4) + 0.22 = 3.37 M
D - E BOTTOM CUT BARS
L = 6 - 0.4 - (⅖)(6 - 0.4) + 2(0.11) = 3.58 M
F TOP CUT BARS
L = (¼)(6 + 0.4 - 0.6) + 0.3 + (¼)(6 - 0.3) + 0.22 = 3.395 M
F - H BOTTOM CUT BARS
L = 6 - 0.3 - (⅖)(6 - 0.3) + 2(0.11) = 3.64 M
H TOP CUT BARS
L = (¼)(6 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.895 M
QUANTITY REINFORCEMENT
5 PCS. 7.5 M BY 20 MM DIA. REBAR
2 PCS. 12 M BY 20 MM DIA. REBAR
1 PC. 13.5 M BY 20 MM DIA. REBAR
BETWEEN COLUMN D AND COLUMN E
TOP CUT BARS
L = (¼)(5 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.645 M
BOTTOM CUT BARS
L = 5 - 0.3 - (⅖)(5 - 0.3) + 2(0.11) = 3.04 M
QUANTITY REINFORCEMENT
 L = 4(1.645) + 2(3.04) = 12.66 M
1 PC. 13.5 M BY 20 MM DIA. REBAR
EB2

STRAIGHT BARS
FRONT TOP BARS (2-20 MM DIA.)
L = 6 + 5.16 + 0.3 + 2(0.11) - 2(0.05) = 11.58 M
BOTTOM BARS (2-20 MM DIA.)
L = 6 + 5.16 + 0.3 + 2(0.11) - 2(0.05) = 11.58 M
STIFFENER BARS (2-16 MM DIA.)
L = 6 + 5.16 + 0.3 + 2(0.088) - 2(0.05) = 11.536 M
QUANTITY OF REINFORCEMENT
2 PCS. 12 M BY 20 MM DIA. REBARS
1 PCS. 12 M BY 16 MM DIA. REBARS

BENT UP BARS
E TOP CUT BARS
L = (¼)(6 + 0.6 - 0.8) + 0.3 + 2(0.11) - 0.05 = 1.92 M
E-F BOTTOM CUT BARS
L = 6 + 0.6 - 0.8 - (⅖)(6 + 0.6 - 0.8) + 2(0.11) = 3.7 M
F TOP CUT BARS
L = (¼)(6 - 0.2) + 0.3 + (¼)(5.16 - 0.5) + 0.22 = 3.135 M
F - G BOTTOM CUT BARS
L = 5.16 - 0.2 - 0.3 - (⅖)(5.16 - 0.5) + 0.22 = 3.016 M
G TOP CUT BARS
L = (¼)(5.16 - 0.2 - 0.3) + 0.3 + 2(0.11) + 0.05 = 1.735 M
QUANTITY OF REINFORCEMENT
1 PC. 7.5 M BY 20 MM DIA. REBARS
1 PC. 10.5 M BY 20 MM DIA. REBARS
1 PC. 12 M BY 20 MM DIA. REBARS
EB1
STRAIGHT BARS
FRONT TOP BARS (2-20 MM DIA.)
L = 6.1 + 6 + 0.25 + 0.25 + 2(0.11) - 2(0.05) = 12.72 M
BOTTOM BARS (2-20 MM DIA.)
L = 6.1 + 6 + 0.25 + 0.25 + 2(0.11) - 2(0.05) = 12.72 M
STIFFENER BARS (2-16 MM DIA.)
L = 6.1 + 6 + 0.25 + 0.25 + 2(0.088) - 2(0.05) = 12.324 M
QUANTITY OF REINFORCEMENT
4 PCS. 13.5 M BY 20 MM DIA. REBARS
2 PCS. 13.5 M BY 16 MM DIA. REBARS
3H TO 5H TOP BARS (2-20 MM DIA.)
L = 0.20 + 6 + 5 + 2(0.11) - 2(0.05) = 11.32 M
BOTTOM BARS (2-20 MM DIA.)
L = 0.20 + 6 + 5 + 2(0.11) - 2(0.05) = 11.32 M
STIFFENER BARS (2-16 MM DIA.)
L = 0.20 + 6 + 5 + 2(0.088) - 2(0.05) = 11.276 M
L = 0.20 + 6 + 5 + 2(0.088) - 2(0.05) = 11.276 M
QUANTITY OF REINFORCEMENT:
4 PCS. 12 M BY 20 MM DIA. REBARS
2 PCS. 12 M BY 16 MM DIA. REBARS

BENT UP BARS
FRONT
A TOP CUT BARS
L = (¼)(6.1 - 0.3) + 0.3 + 2(0.11) - 0.05 = 1.92 M
A - C BOTTOM CUT BARS
L = 6.1 - 0.3 - (⅖)(6.1 - 0.3) + 2(0.11) = 3.7 M
C TOP CUT BARS
L = (¼)(6.1 - 0.3) + 0.3 +(¼)(6 - 0.1) + 0.22 = 3.445 M
C - D BOTTOM CUT BARS
L = 6 + 0.5 - 0.6 - (⅖)(6 + 0.5 - 0.6) + 2(0.11) = 3.76 M
D TOP CUT BARS
L = (¼)(6 + 0.5 - 0.6) + 0.3 + 2(0.11) - 0.05 = 1.945 M
QUANTITY OF REINFORCEMENT
L1 = 1.92 + 3.445 + 1.945 = 7.31 M
L2 = 3.7 + 3.76 = 7.46 M
2 PCS. 7.5 M BY 20 MM DIA. REBARS

RB1
STRAIGHT BARS
1B TO 1F TOP BARS (4-16 MM DIA.)
1B TO 1C-D: L = 4.79 + 3.20 + 0.235 + 0.088 - 0.05 = 8.263 M
1C-D TO 1E-F: L = 0.470 + 3 + 6 + 3 = 12.47 M
1E-F TO 1F: L = 3 + 0.235 + 0.088 - 0.05 = 3.273 M
BOTTOM BARS (4-16 MM DIA.)
1B TO 1C-D L = 4.79 + 0.20 + 1.235 + 0.088 - 0.05 = 6.263 M
1C-D TO 1E-F:L = 6 + 6 + 1 + 0.20 - 1 - 0.20 + 0.47 = 12.47 M
1E-F TO 1F L = 6 - 0.20 - 1 + 0.235 - 0.05 + 0.088 = 5.073 M
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
4 PCS. 9 M BY 16 MM DIA. REBAR
6 PCS. 10.5 M BY 16 MM DIA. REBAR
10 PCS. 13.5 M BY 16 MM DIA. REBAR
3A TO 3H TOP BARS (4-16 MM DIA.)
3A TO 3C-D L = 6.10 + 0.20 + 3 + 0.088 + 0.235 - 0.05 = 9.573 M
3C-D TO 3E-F L = 0.470 + 3 + 6 + 3 = 12.47 M
3E-F TO 3F L = 0.235 + 3 - 0.05 + 0.088 = 3.273 M
BOTTOM BARS (4-16 MM DIA.)
3A TO 3C-D L = 0.088 + 6.5 + 1 + 0.235 - 0.05 = 7.773 M
3C-D TO 3E-F L = 12 - 0.20 - 1 + 0.20 + 1 + 0.470 = 12.47 M
3E-F TO 3F L = 6 - 0.20 - 1 + 0.235 - 0.05 + 0.088 = 5.073 M
QUANTITY OF REINFORCEMENT:
4 PCS. 9 M BY 16 MM DIA. REBAR
6 PCS. 10.5 M BY 16 MM DIA. REBAR
9 PCS. 13.5 M BY 16 MM DIA. REBAR
1B TO 3B TOP BARS (4-16 MM DIA.)
L = 11.23 + 2(0.088) - 2(0.05) = 11.306 M
BOTTOM BARS(4-16 MM DIA.)
L = 11.23 + 2(0.088) - 2(0.05) = 11.306 M
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
8 PCS. 12 M BY 16 MM DIA. REBARS
1F TO 3F SAME WITH THE SET OF STEEL REBARS IN COLUMN B
QUANTITY OF REINFORCEMENT: (INCLUDING THE STIFFENER BARS)
8 PCS. 12 M BY 16 MM DIA. REBARS

BENT UP BARS
QUANTITY OF REINFORCEMENT (INCLUDING THE STIFFENER BARS)
15 PCS. 7.5 M BY 20 MM DIA. REBAR
10 PCS. 9 M BY 20 MM DIA. REBAR
20 PCS. 10.5 M BY 20 MM DIA. REBAR
20 PCS. 12 M BY 20 MM DIA. REBAR
 30 PCS. 13.5 M BY 20 MM DIA. REBAR
RB2

TOP AND
BOTTOM
BARS (2- 16 MM
DIA.)
L1 = 6.55 + 2(0.088) - 2(0.05) = 6.626 M
L2 = 8.19 + 2(0.088) - 2(0.05) = 8.266 M
L3 = 4.05 + 0.20 + 2(0.088) - 2(0.05) = 4.326 M
L4 = 5.59 + 2(0.088) - 2(0.05) = 5.666 M
L5 = 6.57 + 2(0.088) - 2(0.05) = 6.646 M
L6 = 13.28 + 2(0.088) - 2(0.05) = 13.365 M
L7 = 2.67 + 0.20 + 2(0.088) - 2(0.05) = 2.946 M
QUANTITY OF REINFORCEMENT
6 PCS. 6 M BY 16 MM DIA. REBAR
6 PCS. 9 M BY 16 MM DIA. REBAR
8 PCS. 13.5 M BY 16 MM DIA. REBAR
STIRRUPS
LENGTH OF A STIRRUP = 2(A + B) + 2(10D) -3(2D) - 2(3D)
LENGTH OF A STIRRUP = 2(0.30 - 2(0.075) - 0.02 + 0.6 - 2(0.075) - 0.02) + 2(10(0.01)) -
3(2(0.01)) - 2(3(0.01)) = 1.12 M

TIE BEAM
29 - 6 METERS
NUMBER OF STIRRUPS = 36 PCS.
TOTAL NUMBER OF STIRRUPS = 29(36) = 1044 PCS.
TOTAL LENGTH = 1.12(1044) = 1169.28 M
USING 9 M, 10 MM DIA. STEEL BAR
1169.28/9 = 129.2 PCS.
130 PCS. OF 9 M, 10 MM DIA. STEEL BAR

8 - 4.19 METERS
NUMBER OF STIRRUPS = 32 PCS.
TOTAL NUMBER OF STIRRUPS = 8(32) = 256 PCS.
TOTAL LENGTH = 1.12(256) = 286.72 M
USING 9 M, 10 MM DIA. STEEL BAR
286.722/9 = 31.86 PCS.
32 PCS. OF 9 M, 10 MM DIA. STEEL BAR
 3 - 5.5 METERS
NUMBER OF STIRRUPS = 34 PCS.
TOTAL NUMBER OF STIRRUPS = 3(34) = 102 PCS
TOTAL LENGTH = 1.12(102) = 76.16 M
USING 9 M, 10 MM DIA. STEEL BAR
76.16/9 = 8.46 PCS.
9 PCS. OF 9 M, 10 MM DIA. STEEL BAR

2 - 4.26 METERS
NUMBER OF STIRRUPS = 33 PCS.
TOTAL NUMBER OF STIRRUPS = 2(3) = 66 PCS.
TOTAL LENGTH = 1.12(66) = 73.92 M
USING 9 M, 10 MM DIA. STEEL BAR
73.92/9 = 8.21 PCS.
9 PCS. OF 9 M, 10 MM DIA. STEEL BAR

2 - 4.26 METERS
NUMBER OF STIRRUPS = 33 PCS.
TOTAL NUMBER OF STIRRUPS = 2(3) = 66 PCS.
TOTAL LENGTH = 1.12(66) = 73.92 M
USING 9 M, 10 MM DIA. STEEL BAR
73.92/9 = 8.21 PCS.
9 PCS. OF 9 M, 10 MM DIA. STEEL BAR

1ST FLOOR
2FB1
189 PCS. OF 9 M, 10 MM DIA. STEEL BAR
2FB2
8 - 6 METERS
NUMBER OF STIRRUPS = 36 PCS.
TOTAL NUMBER OF STIRRUPS = 8(36) = 288 PCS.
TOTAL LENGTH = 1.12(288) = 322.56 M
USING 9 M, 10 MM DIA. STEEL BAR
322.56/9 = 35.84 PCS.
36 PCS. OF 9 M, 10 MM DIA. STEEL BAR
EB1
2 - 6 METERS
NUMBER OF STIRRUPS = 42 PCS.
TOTAL NUMBER OF STIRRUPS = 2(42) = 84 PCS.
TOTAL LENGTH = 1.12(84) = 94.08 M
USING 9 M, 10 MM DIA. STEEL BAR
94.08/9 = 10.45 PCS.
11 PCS. OF 9 M, 10 MM DIA. STEEL BAR

2 - 3 METERS
NUMBER OF STIRRUPS = 21 PCS.
TOTAL NUMBER OF STIRRUPS = 2(21) = 42 PCS.
TOTAL LENGTH = 1.12(84) = 47.04 M
USING 9 M, 10 MM DIA. STEEL BAR
 47.04/9 = 5.22 PCS.
6 PCS. OF 9 M, 10 MM DIA. STEEL BAR

2ND FLOOR
189 PCS. OF 9 M, 10 MM DIA. STEEL BAR
36 PCS. OF 9 M, 10 MM DIA. STEEL BAR
22 PCS. OF 9 M, 10 MM DIA. STEEL BAR
EB2
NUMBER OF STIRRUPS = 70 PCS.
TOTAL NUMBER OF STIRRUPS = 1(70) = 70 PCS.
TOTAL LENGTH = 1.12(70) = 78.4 M
USING 9 M, 10 MM DIA. STEEL BAR
78.4/9 = 8.71 PCS.
9 PCS. OF 9 M, 10 MM DIA. STEEL BAR

ROOF DECK
103 PCS. OF 9 M, 10 MM DIA. STEEL BAR
ROOF BEAM 1
8-6M
NUMBER OF STIRRUPS = 36 PCS.
TOTAL NUMBER OF STIRRUPS = 8(36) = 288 PCS.
TOTAL LENGTH = 1.12(288) = 322.56 M
USING 9 M, 10 MM DIA. STEEL BAR
322.56/9 = 35.84 PCS.
36 PCS. OF 9 M, 10 MM DIA. STEEL BAR

ROOF BEAM 2
8 PCS. OF 9 M, 10 MM DIA. STEEL BAR

TIE WIRES
1 ROLL = 45 KG = 2385 M
TIE BEAM
NO. OF CONNECTION = 36 X 16 X 45 = 25920
LENGTH = 0.45 X 25920 = 11664 M
ROLLS = 11664/2385 = 4.89 ROLLS ≈ 5 ROLLS
2FB1
NO. OF CONNECTION = 36 X 16 X 49 = 28224
LENGTH = 0.45 X 28224 = 12700.8 M
ROLLS = 12700.8/2385 = 5.325 ROLLS ≈ 6 ROLLS
2FB2
NO. OF CONNECTION = 30 X 16 X 10 = 4800
LENGTH = 0.45 X 3840 = 4800 M
ROLLS = 4800/2385 = 1.56 ROLLS ≈ 2 ROLLS
3FB1
ROLLS = 6
3FB2
ROLLS = 2 ROLLS
RDB1
 NO. OF CONNECTION = 36 X 16 X 39 = 22464
LENGTH = 0.45 X 22464 = 10108.8 M
ROLLS = 10108.8/2385 = 4.24 ROLLS ≈ 5 ROLLS
RDB2
ROLLS = 1 ROLL
EB2
ROLLS = 2 ROLLS
RB1
ROLLS = 3 ROLLS