2.

4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

M450
VERSION
NUMBER：V1.0.0

PRODUCT MANUAL
Please read the manual before use

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

REMOTE CONTROL FUNCTION ANALYSIS

Fixed Speed Switch PWM2

Emergency switch
Activate Cessation
Pusher1 PWM1

Pusher2 Headlights

Menu key / OK key Previous one

Rocker Rocker

Exit button Next

Power switch Key locking

Type-c charging port

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

REMOTE CONTROL SPECIFICATIONS AND PARAMETERS

Model M450

Color Orange-black

Display color Black and white 128*64 px

Language Chinese/English

Applications Lawn mower

Number of channels 10

Channel Resolution PCM1024

Radio band 2401MHz - 2478MHz

Transmitting power ≤100mw

Control distance >800m

Low voltage alarm Yes

Charging port Type-c

Support receivers Standard with R850,

compatible with R860, R830

Size(length, width, height) 261*131*155mm

Weight 1035g

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

STANDARD RECEIVER FUNCTION ANALYSIS

R850

Antennae

Motor 2 Motor 1
M4 (connected to DC brush motor) DC+24V Input (connected to DC brush motor)

Cathode Anodal Cathode Anodal Cathode Anodal

24V Putter motor wiring

Anodal Anodal

Cathode Cathode

Anodal Anodal

Cathode Cathode
Antenna Interface

M3 Power/signal transceiver lamps

System operation light

Cathode +5V Signal

FM button
Servo Wiring

PWM1

PWM2

Cathode +5V Signal

Rear Crash Front Crash Level Connection Grounding Right rear Left rear Right turn Before right After left Before left
Sensor Line 2 Sensor Line 1 12V wire headlight headlight Right headlight Left headlight signal after turning light turn signal turn light

Grounding Grounding Connect the Connecting the Grounding wire Grounding wire Grounding wire Grounding wire Grounding wire Grounding wire Grounding wire Grounding wire
wire wire engine start wire engine off wire

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

RECEIVER SPECIFICATIONS AND PARAMETERS

Model R850

Color Ferrous

Applications Lawn mower

Channel output 2 PWM signals,1 external voltage input

Control range >800m

Frequency range 2401MHz-2478MHz

Receiver power supply requirements DC:12-48V

Voltage return Support

PWM signal Support

SBUS signal No

Frequency pairing mode One-button pairing

Remote control support M450

Antenna type External antenna

Antenna length /mm

Size(length, width, height) 131*110*3（

6 mm）

Weight 455g

www.microzone.cn
DIGITAL PROPORTIONAL R/C
SYSTEM
详细说明 2.4GHz
FHSS

DETAILED DESCRIPTION
Charging:
Use the Type-c cable + charger to connect the remote control for charging, as shown below, the.

Type-c charging port

www.microzone.cn
DIGITAL PROPORTIONAL R/C
SYSTEM
详细说明 2.4GHz
FHSS

First time use:

The first time you unpack the use of the remote control machine and receiver for frequency pairing,
frequency pairing after the success of the remote control and receiver for a short distance distance test,
hand holding the remote control from the receiver 10 to 15 meters away, in the remote control rocker, to
observe whether the equipment is controlled by the remote control, if controlled that the remote control and
the receiver is working properly.

Frequency pairing:
After the remote control is turned off and the receiver is powered on, the power/signal transceiver lamp is on.
Press the frequency pairing button on the receiver, the power/signal transceiver lamp and the system
operation lamp flash alternately to indicate that the receiver is in the frequency pairing mode, then turn on
the remote control, the power/signal transceiver lamp on the receiver blinks slowly and the system operation
lamp blinks fast to indicate that the frequency pairing has been successful.

Power/signal transceiver lamps System operation light FM button

Safe Shutdown Recommendation:

To ensure the safety of your equipment and yourself, turn off the power to the equipment first and then to the
remote control after the equipment motor has stopped running.

Low voltage alarm:

When the voltage of the remote control is lower than 6.8V, it will tick and the battery icon will flash,prompting
you that the power is low, please charge it as soon as possible.

www.microzone.cn
DIGITAL PROPORTIONAL R/C
SYSTEM
详细说明 2.4GHz
FHSS

Remote control calibration:

In the power-on state, and while in the main page, press the <EXIT> key and <Next> key simultaneously for
2 seconds, as follows, the,

When the remote control beeps, enter the joystick calibration status, it will show calibration in progress as
shown in Fig. 1, first pull up, down, left, right and right maximally.Pull up, down, left and right the two
joysticks of the remote control to the maximum extent, as shown in Fig. 2,

Fig. 1 Fig. 2

Then pull the rocker to the center position, as in Figure 1, and finally pull the fixed-speed switch as in Figure
2, the drip stops and the calibration is complete.

Fig. 1 Fig. 2

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

OPERATION PAGE DESCRIPTION

Boot page:

Logo

Model number

Version number

Main page:

Remote control signal

Remote control voltage Receiver signal

quantity of electricity

Counterpart Sticker Counterpart Sticker

Corresponds to the left stick Corresponds to the right stick

Key locking:
Press and hold the <KEY LOCKING> key for 2 seconds to lock the key, When the key is locked, pressing the
<MENU> key, <EXIT> key, <PREVIOUS ONE> key, and < NEXT> key is invalid, and the lock symbol will
appear on the page, and then press and hold the <KEY LOCKING> key for 2 seconds to unlock the key.

Key locking

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

Vehicle Settings:
When there is no option selected on the main page, press <MENU> to select Vehicle Settings, then press
<MENU> to enter Vehicle Settings, you can press <PREVIOUS ONE> or <NEXT> to select the
corresponding option, then press <MENU> to enter.

Headlight settings:
Headlights on: toggle the headlight switch forward and the headlights turn on, then toggle the headlight
switch forward and the headlights turn off; toggle the headlight switch backward and the rear headlights turn
on, then toggle the headlight switch backward and the rear headlights turn off; when the front headlights are
on, then toggle the headlight switch backward and the front and rear headlights turn on at the same time;
when the rear headlights are on, then toggle the headlight switch forward and the front and rear headlights
turn on at the same time;
Headlights off: toggle the headlight switch is invalid;
Turn signal auto: when the vehicle turns, the turn signal will flash; turn on the left and right turn signal
according to the direction of the rocker's left and right swing, and then select the turn signal mode (the
selection of the mode is based on the structure of the vehicle);
Turn signal off: turn signal is invalid when the rocker is swung to the left or right; press <PREVIOUS ONE>
key or <NEXT> key to select the corresponding option, then press <MENU> key to confirm.

Headlights

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

Actuator settings:
Controls putter expansion and contraction;
Putter <FAST>: fast speed; Putter <SLOW>: slow speed;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

Pusher2

Pusher1

Constant speed switch:

On: Toggle the constant speed switch backward to turn constant speed on, then backward again to turn
constant speed off; when constant speed is on, every time you shake the rocker in the forward and backward
direction (depending on the rocker setting to determine which rocker controls forward and backward) as
shown below, it will either increase or decrease the speed, and it will be ticking;
Off: Toggling the fixed speed switch is not effective;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

Fixed Speed Switch

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

Emergency switch:
On: Press the emergency switch, the emergency brake is on, when the emergency brake is on, the remote
control and the mower will pause, the screen will flash and shrink, and it will drip, rotate the emergency
switch to the right to release the emergency brake;
Off: Pressing the emergency switch is not effective;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

Emergency switch

Anti-collision sensing:
Front collision avoidance on: pauses when the front of the model hits an object;
Front anti-collision off: front anti-collision sensing is not effective;
Rear anti-collision on: pauses when the rear of the model hits an object;
Rear anti-collision off: rear anti-collision sensing is disabled;
Press <PREVIOUS ONE> or <NEXT> to select the corresponding option, then press <MENU> to confirm.

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

Wheel steering:
The left motor controls the left wheel forward or reverse, and the right motor controls the right wheel forward
or reverse;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

Remote Control Setting:

When there is no selection option in the main page, press <MENU> key, then press <PREVIOUS ONE> key
or <NEXT> key to select Remote Control Setting, then press <MENU> key to enter Remote Control Setting,
you can press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press
<MENU> key to enter.

Joystick settings:
Mode 1: left joystick forward and backward control forward and backward, right joystick left and right control
left and right turn;
Mode 2: left joystick left and right control left turn and right turn, right joystick front and back control forward
and backward;
Mode 3: left joystick is invalid, right joystick controls forward, backward, left turn and right turn;
Mode 4: left joystick controls forward, backward, left turn and right turn, right joystick is invalid;
Mode 5: left joystick controls left wheel forward, backward, right joystick controls right wheel forward,
backward;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

Differential speed fine-tuning:

Fine-tune the speed of the motor, channel 1 is for the left motor, channel 2 is for the right motor, the number
(+) is acceleration, (-) is deceleration;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key,
then press <PREVIOUS ONE> key or <NEXT> key to adjust the value, then press <MENU> key to confirm.

Differential speed setting:

On: 1/2 channel mixing control; Off: no mixing control;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, press <MENU> key to
confirm.

Response Level:
Adjusts the response speed of the joystick, the larger the value, the faster the response speed, the smaller
the value, the slower the response speed;
Press the <MENU> key, then press the <PREVIOUS ONE> key or <NEXT> key to adjust the value, then
press the <MENU> key to confirm.

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

Backlight settings:
Normally on: the screen always turns on the backlight;
Auto: the backlight turns on when the key is pressed and turns off after 11 seconds of not pressing the key;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

Voice selection:
Support Chinese and English;
Press <PREVIOUS ONE> key or <NEXT> key to select the corresponding option, then press <MENU> key to
confirm.

www.microzone.cn
 2.4GHz
DIGITAL PROPORTIONAL R/C
SYSTEM FHSS

STANDARD CONFIGURATION LIST

Packaging box * 1, remote control * 1, receiver * 1;
Standard receiver: R850;
Compatible receivers: R860, R830.

MATTERS NEEDING ATTENTION

Before
starting
to
use
the
remote
control,
carefully
read
the
following
precautions!
1. This product is not a toy and is not suitable for children under the age of 12, Adults should keep this product out of
reach of children and keep it out of reach of children Be careful when operating this product in the field.

2. Please do not use it in harsh weather conditions such as evenings, thunderstorms, snows, low energy levels, etc.

3. Do not use the remote control in snowy or watery places, if rainwater enters the remote control, the circuit will be
short-circuited and cannot be used.
4. Signal interference may cause the remote control to go out of control,places where interference affects more than
others are as follows:
A. Near the mobile phone signal transmission tower
B. Near high-voltage power lines and communication broadcasting antennas
C. Near the Military Radar Launch Tower
D. The complexity of wireless communication and the commercial path of mobile activities
E. Navigation domain

5. Please do not use this product after feeling tired, uncomfortable, drunk, or excited about drugs, otherwise it will
cause serious injury to oneself or others The value of is.

6. 2.4G radio band is completely different from the low-frequency radio band used previously; make sure that the
product is operated within your line of sight when using it, as large obstacles can block the radio signal and cause
loss of control of the remote control and the device.
7. Make sure that the remote control and equipment are installed correctly, and that all servos operate in the same
direction as the controls before use, otherwise serious damage to the equipment may occur.

8. When the remote control distance continues to be long, loss of control may occur, so please shorten the control
distance appropriately; insufficient battery voltage in the remote control may result in loss of control if the transmitter
does not emit a signal, so please recharge the battery as soon as possible when the remote control has a low voltage
alarm.
9. When keeping the remote control off, be sure to turn off the power to the receiver and then turn off the remote
control; if you turn off the power to the remote control first and the receiver is still operating, the equipment may go out
of control or the engine may continue to operate, resulting in a serious accident.

10. Improper use of the remote control may cause serious injury or even death to the operator or others; To ensure
the safety of you, others, and equipment, please be careful Read this guide and follow the instructions.

11. The remote control and receiver required for our company's 2.4G wireless transmission system are used in pairs,
while other company products cannot be connected to our company's products The product is of great value.

www.microzone.cn