Scribd
Upload
24 views3 pages

Foxcom CDWDM SFP v4

The document details the specifications and features of Foxcom's DWDM/CWDM Long Distance SFP, which supports all channels of the CWDM and DWDM ITU grids, operates within a temperature range of -5°C to +70°C, and has low power dissipation. It is a hot-swappable device that supports up to 1 GB data rates and is available in various fiber lengths. The document also includes technical specifications for both optical and electrical parameters, along with ordering information for different versions of the SFP.

Uploaded by

masoodalams
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views3 pages

Foxcom CDWDM SFP v4

The document details the specifications and features of Foxcom's DWDM/CWDM Long Distance SFP, which supports all channels of the CWDM and DWDM ITU grids, operates within a temperature range of -5°C to +70°C, and has low power dissipation. It is a hot-swappable device that supports up to 1 GB data rates and is available in various fiber lengths. The document also includes technical specifications for both optical and electrical parameters, along with ordering information for different versions of the SFP.

Uploaded by

masoodalams
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DWDM/CWDM Long Distance SFP

Features & Benefits


 Available in All 16 Channels of the CWDM ITU Grid
 Available in All 80 Channels of the DWDM ITU Grid
 Cold Start-Up Wavelength Compliance
 Low Power Dissipation <1.3W Maximum
 -5÷C to +70°C Operating Case Temperature
 Extended Link Budget with APD Receiver Technology
 RoHS Compliant and Lead Free

Product Description
Foxcom’s Small Form-Factor Pluggable (SFP) Gigabit Interface Converter is a hot-swappable
input/output device plugs into a Gigabit Ethernet port or slot.

The SFP device supports up to 1 GB of data rate and is available with CWDM/DWDM wavelengths in
single/dual fiber configuration.

The SFP is available in 20, 40, 60 and 120Km fiber versions.

Israel Corporate HQ, 16 Hataasia Street, Har Tov A Ind. Zone, Beit Shemesh 99052. Tel: +972-2-589-9888 Fax: +972-2-589-9898 [email protected]
US Sales Office, 1315 Outlet Center Drive, Smithfield, North Carolina 27577. Tel: 609-514-1800 Fax: 609-514-1881 www.foxcom.com
© Copyright 2017, Foxcom. All rights reserved. Other trademarks referenced are the property of their respective owners.
All specifications are subject to change without notice. Rev 01/June 2017.
Specifications
Absolute Maximum Ratings

Parameter Symbol Min Max Unit


Supply Voltage Vcc -0.3 4.0 V
Storage Temperature Tst -40 85 ÷C

Data AC Voltage TX+-AC - 2.4 V


Data DC Voltage TX+-DC -0.5 2.5 V
Optical Input Received Power PIN - +5 dBm

Operating Conditions

Parameter Symbol Min Typical Max Unit

Supply Voltage Vcc 3.13 3.3 3.47 V


Operating Case temperature Tca -5 - 70 ÷C
Total Current Icc - - 375 mA

Module Power Dissipation Pm - 0.8 1.4 W

Data Rate Multi-rate Mra 100 2500 2700 Mb


p
s

Optical Transmitter Specifications

Parameter Symbol Min Typical Max Unit

Optical Transmit Power Po 0 2 4 dB


PTX_DISABLE m
Optical Transmit Power (disabled) - -40 dB
m
Extinction Ratio ER 8.2 - dB
Channel Spacing ∆f - 100 - GH
z
Jitter Generation TJP-P - - 70 mUI

Spectral Width (20dB) Dl20 - 0.1 0.3 nm

Side Mode Suppression Ratio SMSR 30 - - dB

Electrical Transmitter Specifications

Parameter Symbol Min Typical Max Unit


Supply Voltage VCCTX 3.13 3.3 3.47 V

PECL/CML Input VTXDIFF 500 - 1600 mV

Input Rise/Fall TR / TF - - 160 ps


TxFault_Fault Vf 2 - Vcc V
TxFault_Normal Vn Vee - Vee+0.5 V

TX_DISABLE (asserted) VDH 2 - Vcc V

TX_DISABLE (negated) VDL Vee - Vee+0.8 V

Optical APD Receiver Specifications

Parameter Symbol Min Typical Max Unit


Receiver Sensitivity Rsens-1 - -30 -28 dB
Rsens-2 m
Receiver Sensitivity (OSNR = 20dB) - - -24 dB
m
Maximum Input Power RX-overload - - -7 dB
‫כ‬ m
Input Operating Wavelength 1528 - 15 nm
6
Reflectance Rrx - - -27 dB
4
Loss of Signal Asserted PA -40 - -33 dB
PD m
Loss of Signal –De Asserted - - -31 dB
m
Hysteresis PA PD 0.5 - 4 dB

Electrical APD Receiver Specifications

Parameter Symbol Min Typical Max Unit


Supply Voltage VCCRX 3.13 3.3 3.47 V

Differential Output Swing VOUT P-P 370 - 2000 mV

Rise/Fall Time TR / TF - - 170 ps


Loss of Signal –Asserted VOH 2 - Vcc V
Loss of Signal –Negated VOL Vee - Vee+0.5 V

Ordering Information
CWDM SFP Version:

SFP-YYY-1XXX-1000
XXX specifies CWDM Wavelength (see CWDM ITU Chart)

YYY specifies maximum fiber length support (20, 40, 60, 120Km)

DWDM Version:

SFP-YYY-CHXX-1000

XX specifies DWDM ITU Channel (see DWDM ITU Chart)

YYY specifies maximum fiber length support (20, 40, 60, 120Km)

You might also like