Chapter 1

Introduction

1.1 Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
 1-1 DATA COMMUNICATIONS

The term telecommunication means communication at a

distance. The word data refers to information presented
in whatever form is agreed upon by the parties creating
and using the data. Data communications are the
exchange of data between two devices via some form of
transmission medium such as a wire cable.
Fundamental Characteristics:
Delivery, Accuracy, Timeliness, Jitter
Topics discussed in this section:
Components (Message, Sender, Receiver, Transmission Medium,
Protocol).
Data Représentation (Text, Number, Images, Audio, Video)
Data Flow (Simplex, Duplex, Half Duplex)
1.2
 Components
4. Transmission medium. The
1. Message. The message is the transmission medium is the
information (data) to be physical path by which a message
communicated. Popular forms of travels from sender to receiver.
information include text, numbers,
Some examples of transmission
media include twisted-pair wire,
pictures, audio, and video. coaxial cable, fiber-optic cable,
and radio waves.
2. Sender. The sender is the device that
sends the data message. It can be a 5. Protocol. A protocol is a set of
computer, workstation, telephone rules that govern data
handset, video camera, and so on. communications. It represents an
agreement between the
communicating devices. Without a
3. Receiver. The receiver is the device protocol, two devices may be
that receives the message. It can be a connected but not communicating,
computer, workstation, telephone just as a person speaking French
handset, television, and so on. cannot be understood by a person
who speaks only Japanese.

1.3
 Figure 1.1 Five components of data communication

1.4
 Data Representation
 Text (Unicode, American Standard Code for
Information Interchange (ASCII))
 Numbers
 Images ( Divided into pixel with size in bit
patterns, has color scheme of RGB- red,
green, and blue or YCM- yellow, cyan, and
magenta.
 Audio
 Video
1.5
 Data Flow
 Simplex
 Duplex
 Half Duplex
 Full Duplex

1.6
 Figure 1.2 Data flow (simplex, half-duplex, and full-duplex)

1.7
 1-2 NETWORKS

A network is a set of devices (often referred to as nodes)

connected by communication links. A node can be a
computer, printer, or any other device capable of sending
and/or receiving data generated by other nodes on the
network.

Topics discussed in this section:

Distributed Processing
Network Criteria (performance, reliability, security)
Physical Structures (Type of Connection: Multipoint, Point to
Point. Topology: Mesh, Star, Bus, Ring, Hybrid)
Network Models (OSI, TCP/IP)
Categories of Networks (PAN, LAN, MAN, WAN)
Interconnection of Networks: Internetwork
1.8
 Figure 1.3 Types of connections: point-to-point and multipoint

1.9
 Figure 1.4 Categories of topology

1.10
1.11
 Figure 1.5 A fully connected mesh topology (five devices)

1.12
 Figure 1.6 A star topology connecting four stations

1.13
 Figure 1.7 A bus topology connecting three stations

Back Bone Cable are connected to Drop line through Taps.

Signal becomes weak as it travels further distance.
Advantages: Ease of Installation. Uses less cables. Less complex.
Disadvantages: Difficult to fault isolation and reconnection. Difficult to add new devices.
Signal reflection at tapes reduces the signal quality. A fault or break in the bus cable stops all transmission.

1.14
 Figure 1.8 A ring topology connecting six stations

Easy to install and reconfigure. Fault isolation is simplified. If one device does not receive a signal within a specified period,
it can issue an alarm. The alarm alerts the network operator to the problem and its location.

The only constraints are media and traffic considerations (maximum ring length and number of devices).
Unidirectional traffic can be a disadvantage. In a simple ring, a break in the ring (such as a disabled station) can disable the
entire network. Solution: Dual Ring.

1.15
 Figure 1.9 A hybrid topology: a star backbone with three bus networks

1.16
 Figure 1.10 An isolated LAN connecting 12 computers to a hub in a closet

1.17
 Figure 1.11 WANs: a switched WAN and a point-to-point WAN

1.18
 Figure 1.12 A heterogeneous network made of four WANs and two LANs

1.19
 1-3 THE INTERNET

The Internet has revolutionized many aspects of our daily

lives. It has affected the way we do business as well as the
way we spend our leisure time. The Internet is a
communication system that has brought a wealth of
information to our fingertips and organized it for our use.

Topics discussed in this section:

A Brief History
The Internet Today (ISPs)

1.20
 Brief History
 Came into existence in 1969 only after Packet Switched Network was invented in 1961 at
MIT by Leonard Kleinrock.
 DoD (Dept of Defense) through ARPA (Advanced Research Projects Agency) represented
ARPANET in ACM (Association of Comuting Machinery) meeting in 1967.
 Introduced IMP (Interface Message Processor).
 In 1969, UCLA – UCSB – SRI – UoU got connected.
 University of California Los Angeles – UCLA
 University of California Santa Barbara – UCSB
 University of Utah – UoU
 Sanford Research Institute (SRI)
 Software Support by NCP – Network Control Protocol.
 1972, Vint Cerf and Bob Kahn came up with paper on TCP with networking concepts of
encapsulation, datagram, gateways, end to end delivery of packets.
 Soon TCP was split into TCP and IP.
 In 1981, UC Berkeley modified the UNIX operating system to include TCP/IP which
popularized Internetworking.
 Then came creation of CSNET in 1981. Computer Science Network (CSNET) was a
network sponsored by the National Science Foundation (NSF).
 In 1983, ARPANET split into two networks: Military Network (MILNET) for military
users and ARPANET for nonmilitary users.
1.21
 Today, it is managed by ISP – Internet Service Providers.
 Figure 1.13 Hierarchical organization of the Internet

ISP – Internet Service Provider

NAP – Network Access Point

ISP Communicate with each

others network through NAP

1.22
 Standards Organization
 ISO – International Organization of Standardization
 ITU-T – International Telecommunication Union
Telecommunication Standards formed CCITT in 1993
for research.
 CCITT – Consultative Committee for International
Telegraphy and Telephony.
 ANSI – American National Standards Institutions.
 IEEE – Institute of Electric and Electronics Engineers
 EIA – Electronic Industries Association
 FCC – Federal Communication Commission
 RFC – Request for Comment
 How about Controlling body in India?

1.23
 Standards Organization in INDIA
 Press Council of India (PCI),
 News Broadcasting Standards Authority (NBSA),
 Central Board of Film Certification (CBFC),
 Telecom Regulatory Authority of India (TRAI),
 Indian Broadcasters Federation (IBF),
 News Broadcasters Association (NBA),
 Indian Media Group (IMG),
 Indian Society of Advertisers (ISA),
 The Advertising Standards Council of India (ASCI),
 Advertising Agencies Association of India (AAAI),
 Media Research Users Council (MRUC),
 Audit Bureau of Circulations (ABC),
 Press Trust of India (PTI),
 Confederation of Indian Industry (CII),
 the Associated Chambers of Commerce and Industry of India
(ASSOCHAM),
 Federation of Indian Chambers of Commerce and Industry (FICCI),
 United News of India (UNI)
1.24
1.25