Scribd
Upload
5 views7 pages

Velocity and Pressure Difference Calculations

The document provides calculations related to fluid flow in a pipe, including inputs for pipe diameter, mass flow rate, and fluid density. It presents derived values such as cross-sectional area, volumetric flow rate, fluid velocity, and pressure difference. Sample locations for measurements are also listed, along with corresponding fluid properties and conditions.

Uploaded by

محمد عطا
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
5 views7 pages

Velocity and Pressure Difference Calculations

The document provides calculations related to fluid flow in a pipe, including inputs for pipe diameter, mass flow rate, and fluid density. It presents derived values such as cross-sectional area, volumetric flow rate, fluid velocity, and pressure difference. Sample locations for measurements are also listed, along with corresponding fluid properties and conditions.

Uploaded by

محمد عطا
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 7

enter pipe diameter (m)

enter mass flow rate (kg/s)

enter fluid density (kg/m3)

cross sectional area of the pipe (m2)

fluid volumetric flow rate (m3/s)

fluid velocity (m/s)

fluid velocity (feet/s)

Sample Code Sample location


SP01 After Carbon Filter
SP02 After Softener
SP03 After RO1
SP04 After RO2
SP05 After EDI
SP06 Distribution Loop Return
UP01 At end of powder preparation corridor
UP02 Inside preparation room 2
UP03 Inside of film coating room
UP04 Above the sink of container washing room
0.025

0.5

1000

0.000490873852123405

0.0005

1.01859163578813

3.34183618235913

enter pipe diameter (m) enter mass flow rate (kg/s) enter fluid density (kg/m3)
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
0.025 0.5 1000
velocity & pres

cross sectional area of the pipe (m2) fluid volumetric flow rate (m3/s)
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
0.000490873852123405 0.0005
velocity & pressure drop calculator

pressure difference eq.

fluid velocity (m/s) fluid velocity (feet/s) viscosity of the fluid (kg/m.s)\
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
1.01859163578813 3.34183618235913 0.001
tor

length of the cylindrical pipe (m) slope angle Sin in radians


10 90 1
90 1
90 1
90 1
90 1
90 1
90 1
26.72 0 0
35.48 0 0
90 1
the gravitational acceleration (m/s²) pressure difference (Pa or N/m²)
9.80665 98066.5000000001
9.80665 0
9.80665 0
9.80665 0
9.80665 0
9.80665 0
9.80665 0
9.80665 1393.49854762285
9.80665 1850.34911937346
9.80665 0

You might also like