Scribd
Upload
180 views2 pages

CCNA - 200-301 Course Contents

The CCNA 200-301 course at Sina Institute covers essential networking concepts, including the OSI model, TCP/IP layers, and basic router and switch configurations. It also includes advanced topics such as VLANs, static and dynamic routing, network security, and wireless networking. The course consists of nine modules, totaling 40 credit hours, aimed at providing comprehensive knowledge and skills in networking.

Uploaded by

Muhammad Shoaib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
180 views2 pages

CCNA - 200-301 Course Contents

The CCNA 200-301 course at Sina Institute covers essential networking concepts, including the OSI model, TCP/IP layers, and basic router and switch configurations. It also includes advanced topics such as VLANs, static and dynamic routing, network security, and wireless networking. The course consists of nine modules, totaling 40 credit hours, aimed at providing comprehensive knowledge and skills in networking.

Uploaded by

Muhammad Shoaib
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Sina Institute of Networks & Aesthetics

CCNA – 200- 301 - (Course Content) Credit Hours: 40

Content Outline
Module 0.  Identify the components of a computer network and describe their basic characteristics

Networking Fundamentals

• Understand the OSI Reference Model


• Describe LANs and the role of switches within LANs
Module 1. • Describe Ethernet as the network access layer of TCP/IP and describe the operation of
switches
• Describe the TCP/IP Internet layer, IPv4 addressing scheme, and subnetting
• Describe IPv4 and IPv6 main features and addresses
• Describe the TCP/IP Transport layer and Application layer

Cisco Command-Line Interface (CLI) Basics

• Get Started with Cisco Command-Line Interface (CLI)


• Implement basic configuration on a Cisco router
Module 2.
• Perform Basic Switch Configuration
• Implement the Initial Switch Configuration
• Implement an Initial Router Configuration
• Configure an Interface on a Cisco Router

Switching Concepts and Configuration

 Observe How a Switch Operates


 Identify and resolve common switched network issues and problems associated with IPv4
Module 3. addressing
 Describe, implement, and verify Virtual Local Area Networks (VLANs) and trunks
 Configure VLAN and Trunk
 Troubleshoot VLANs and Trunk
 Implement Multiple VLANs and Basic Routing Between the VLANs
 Configure a Router on a Stick

IP Addressing and Subnetting

 Describe the TCP/IP Internet layer, IPv4 addressing scheme, and subnetting (Expanded
Coverage)
 Describe IPv4 and IPv6 main features and addresses (Expanded Coverage)
Module 4  Configure Basic IPv6 Connectivity
 Configure IPv6 Static Routes
 Describe IPv6 main features and addresses, and configure and verify basic IPv6
connectivity

693, Rehman Road, Sector I-8/4 Islamabad, Pakistan-44000


Ph.: 051-4864925-26 | Web: www.sina.com.pk | www.sina.edu.pk | Email: [email protected] | Facebook/sina.edu.pk
Sina Institute of Networks & Aesthetics
Routing Concepts and Configuration

 Explore functions of Routers


 Explain host-to-host communications across switches and routers
 Describe the operation, benefits, and limitations of static routing
 Configure and Verify IPv4 Static Routes
Module 5
 Implement IPv4 Static Routing
 Implement IPv6 Static Routing
 Explain the basics of dynamic routing protocols and describe the components and terms
of Open Shortest Path First (OSPF)
 Configure and Verify Single-Area OSPF

Network Security and Management

 Secure Console and Remote Access


 Enable and Limit Remote Access Connectivity
 Secure Device Administrative Access
Module 6  Configure and Verify NTP
 Configure System Message Logging
 Create the Cisco IOS Image Backup
 Upgrade Cisco IOS Image
 Describe the operation of Access Control Lists (ACLs) and their applications in the network

Advanced Switching Concepts

 Explain how Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) work
 Configure link aggregation using Ether Channel
Module 7  Configure and Verify Ether Channel
 Improve Redundant Switched Topologies with Ether Channel
 Describe the purpose of Layer 3 redundancy protocols
 Describe the application and configuration of inter-VLAN routing

Network Services

 Configure Internet access using Dynamic Host Configuration Protocol (DHCP) clients
Module 8  Explain and configure Network Address Translation (NAT) on Cisco routers
 Configure a DHCP Scope
 Configure a Dynamic (VLAN) Interface

Wireless Networking

 Configure WLAN Using Wi-Fi Protected Access 2 (WPA2) Pre-Shared Key (PSK) Using the
Module 9
GUI
 Configure a WLAN

693, Rehman Road, Sector I-8/4 Islamabad, Pakistan-44000


Ph.: 051-4864925-26 | Web: www.sina.com.pk | www.sina.edu.pk | Email: [email protected] | Facebook/sina.edu.pk

You might also like