SPREADER OPTION

LED INDICATOR LAMPS

APPLICATION DESCRIPTION

Revision date: 2016-12-20

PRODUCT INFORMATION

DESCRIPTION
Bromma telescopic spreaders can, as an option, be It is common to add two lamp brackets on the spreader
equipped with LED Indicator Lamps. The lamps indicate mainframe, in order to indicate the status of the
to the crane driver and other personnel if the spreader twistlocks in each endbeam. As an alternative, the LED
has landed (standard colour white), is unlocked Indicator Lamps may also be supplied as loose items
(standard colour green), or has locked on a container from Bromma, to be installed on the headblock.
(standard colour red).
The Bromma LED Indicator Lamps are available in
For twinlift spreaders, a fourth lamp is used to indicate different colours and each lamp can be ordered sep-
twinboxes down (standard colour blue). For mobile har- arately. The mounting bracket assembly consists of a
bour crane spreaders, the fourth lamp indicates tower coated steel bottom plate for 2-4 LED lamps and two
in mid-position (standard colour yellow). gable plates.

The LED Indicator Lamp design extends the lifetime The tilt angle for the multi-lamp bracket assemblies are
of the lamp system considerably and at the same time adjustable through discrete fixing holes in the gable
increases the visibility in daylight. end while the mounting bracket for the single lamp is
fixed. The bracket assembly also includes attachment
The LED Indicator Lamps are vibration and shock resist- screws, washers and nuts in stainless steel quality.
ant and can be mounted directly on the main frame
without dampers. The LED lamps are available as 24 VDC and 100-250 VAC
versions. The lamps are made of polycarbonate and
The new mounting brackets allows lamp adjustment in equipped with a M12 connector for the 24 VDC version
seven different angles from -90º to 90º to increase and an ½-20 UNF-28 connector for the 100-250 VAC
visibility. The LED Indicator Lamps can easily be version.
mounted on all existing spreaders.

LED lamp
APPLICATION
The Bromma LED Lamp assembly can be used with:

All Bromma spreaders; or

Bracket
Other spreader brands,
for both new orders and upgrades.

2
SPECIFIC BRACKET
Bracket No. of lamps Part No. Remarks
1 BR1123884 Angle not adjustable.
Fastening screws, nuts and washers in stainless
steel quality included.

2 BR1123482 Angle adjustable in seven different positions.

Fastening screws, nuts and washers in stainless
steel quality included.

3 BR1122860 Angle adjustable in seven different positions.

Fastening screws, nuts and washers in stainless
steel quality included.

4 BR1123771 Angle adjustable in seven different positions.

Fastening screws, nuts and washers in stainless
steel quality included.

5 BR1123483 Only for spare parts.

Fastening screws, nuts and washers in stainless
steel quality included.

SPECIFIC LAMP
Lamps Colour Part No.
24 VDC Version 100-250 VAC Version
Green BR1701085 BR1702584

Red BR1701086 BR1702585

Yellow BR1701088 BR1702587

White BR1701089 BR1702588

Blue BR1701087 BR1702586

3
SPECIFIC CABLE
24 VDC Version
Cable / Cable Head Length Part No. Remarks
2m BR76498 24 VDC Cable for 1-2 LED set

5m BR70395 24 VDC Cable for 1-2 LED set

10 m BR70396 24 VDC Cable for 1-2 LED set

7.3 m BR1701780 24 VDC Cable for 3-4 LED set

100-250 VAC Version

Cable / Cable Head Length Part No. Remarks
7m BR1702590 100-250 VAC Cable for 1 LED set

7m BR1702589 100-250 VAC Cable for 2 LED set

7m BR1702590 & 1 piece of BR1702590 & 1 piece of

BR1702589 BR1702589 to be used for 3 LED set

7m BR1702589 2 pieces of BR1702589 to be used for 4

LED set

4
DIMENSIONAL DRAWINGS – LED INDICATOR
LAMPS
24 VDC Version 100-250 VAC Version

M30x1.5
(mounting nut included) M30x1.5
Max. torque 4.5Nm Max. torque 4.5Nm
M12 1/2-20 UNF-28

Bracket Versions 168

B
86

7357
102

ø8,5
B 120 120
A

Type A mm
2 lamp 275

3 lamp 420
130

4 lamp 420
A A
4 lamp sparep. 565
2-4 lamps bracket

1 lamp bracket
102
73

120
2-4 lamps bracket
Type A mm
2 lamp 275

3 lamp 420

4 lamp 420
A
4 lamp sparep. 565

Dimensional drawings of LED Indicator Lamps. We reserve the right to change the design and technical data without prior notice.
© 2016 Bromma – All rights reserved.

5
TECHNICAL DATA - LED INDICATOR LAMPS

Model 24 VDC Version: 100-250 VAC Version:

Power consumption per lamp 160 mA max 12 VDC 16mA 100-250 VAC 50/60Hz
80 mA max at 30VDC

Supply protection circuitry Protected against reverse polarity and transient voltages.

Environment Rating Rated IEC IP67 and IP69K, per DIN40050

Construction Base and covers, polycarbonate.

Operating conditions -40º to +50ºC ( -40º to 122ºF )

90% at 50ºC max relative humidity (non-condensing)

Connections M12 A-code 4-pin male Micro male 3-pole

Tilting angles (2-4 Lamp -90º , -50º , -25º , 0 , 25º , 50º , 90º
brackets)

Corrosion protection Bromma standard

brackets

Surface conditioning Sand-blasted SA 2.5

painted parts EPZn(R) zinc epoxy primer 50-90 µm
EP epoxy can be MIO pigmented 100 µm
PUR polyurethane 70 μm
Total: 220 μm

Finishing colour RAL 7021 (Black Grey)

Fastening material M8 stainless quantity

Warranty 1 year

6
 ISH HERI T
ED
AG
SW

QU
AL ED
IT Y ASSUR

We reser ve the r ight to change the design and technical data without pr ior notice.
© 2016 Bromma – All r ights reser ved.

[email protected]
www.bromma.com