Scribd
Upload
10 views1 page

Steel Bars

The document outlines the design specifications for reinforced-concrete structural members, including nominal weights and dimensions for deformed bars. It provides tables detailing the designation numbers, deformation requirements, and physical properties of various types of reinforcing bars according to ASTM standards. Additionally, it discusses the use and delivery methods of welded-wire fabric in construction applications.

Uploaded by

Bun Kun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
10 views1 page

Steel Bars

The document outlines the design specifications for reinforced-concrete structural members, including nominal weights and dimensions for deformed bars. It provides tables detailing the designation numbers, deformation requirements, and physical properties of various types of reinforcing bars according to ASTM standards. Additionally, it discusses the use and delivery methods of welded-wire fabric in construction applications.

Uploaded by

Bun Kun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 1
12-2 Design of Reinforced-Concrete Structural Members , Nominal Weights, Nominal Dimension: TABLE 1 Deformed Bar Designation Number and Deformation Requirements Nominal dimensions? Deformation requirements, in Max gap (chord Bar Nominal Cross. Max Max Min of 12b% of designation weight, Diameter, sectional Perimeter, OD, average average nominal Not Tw in| areain? in in’ spacing height perimeter) 36 0376 0375 Ol Tis 0262 0S. 4 0668 = 0500-020 571 %e = 0.850 0.020 O18 5 10430625) O31 L883 the 043700280 6 1502 0750 (442.356 ® 0525 00380286, 7 2044 «0875060 27H 0612 00440334 8 267 1.000079 Bh 0.700 0050 (0.388, 8 3400-1128 1.00 BBA 0790 © 00560431 10 4303 «12701973000 he 0889 ©0064 087 ul 5313 1410564400 0987 00710540 4 765 «1693225052 Ve 11850085648 18 1360-2957 400709 158 0.102 0.864 Sizes 14 and 18 are large bars generally not carried in regular stock, They are available by arrangement with the supplier. "The nominal dimensions of a deformed bar are equivalent to those ofa plain round bar having the ‘sume weight per foot as the deformed bar. ‘Bar numbers are based on the number of eighths of an inch in the nominal diameter ofthe bars. {The maximum outside diameter including deformations may be important as when punching holes in structural-steel members to accommodate bars or in fitting couplings, or in nesting or bundling bars. Enact dimensions vary among manufacturers. Tabulated values allow for deformations, longitudinal ribs, and out of round, While No, 3 bars are used for stirups, column ties, et, itis suggested that slab bars, in general, be No. 4 or larger. tagged and delivered, ready for placement. In certain areas, the bars are delivered cut to length and are bent at the job site. Sometimes they are delivered in stock lengths of appropriate sizes and are cut and bent at the job site. When bars are prefabricated, the various shapes are designated by type numbers (Fig. 1). Welded-wire fabrie consists of sheets or rolls of mesh made by welding each intersec- tion of crossing layers of the same or different gage wires at equal spacings each way (square mesh) or different spacings (rectangular mesh). Sheets or rolls may have a maxi- mum width of 12 or 13 ft (depending upon the width of welding equipment available) by whatever length can be handled. Welded-wire fabric is designated by two numbers and two letter-number combinations, TABLE 2 Physical Requirements for ASTM Reinforcing Bars Yield Tensile Elongation ‘Type of steel and Size nos. strength strength ASTM specification inclusive Grade min, psi___ min, psi Billet steel A615 3-6 40 40,000 70,000 11-12 3.5d-5d 3-18 60 60,000 90.000 79 3.5d-8d 11-18 75 75,000 100,000 6 Td-9d Rail steel A616 3-11 50 50,000 80.000 5-7 6d-8d 3-11 60 60,000 90,000 4.5-6 6d-8d Axle steel A617 3-6 40 40,000 70,000 11-12 4d-5d 3-11 60 60,000 90.000 7-8 4d-8d Weldable steel A706. 3-18-60 60,000 80.0008 10-14 3d-Sd Max Min 78,000 1.25 actual yield “See ASTM specification for details. Depends on bar size. Plain round bars with diameters up to 2 in may also be furnished meeting ASTM A615, A616, and A617 requirements. fd = bar nominal diameter. 178,000 max. $1.35 X actual yield min.

You might also like