Code No. D-2204/AICTE FACULTY OF ENGINEERING B.E. (CSE) VI Semester (AICTE) (Backlog) Examination, March / April 2022 Subject: Computer Networks Time: 3 hours Max. Marks: 70 (Missing data, if any, may be suitably assumed) PART-A Note: Answer all questions (10 x 2 = 20 Marks) 1 Define the five components of Data Communication. 2 State the difference between Synchronous and Asynchronous Transmission 3. Compare the two types of errors with example. 4 State two difference between Pure ALOHA and Slotted ALOHA. 5 Identify the IPv4 class, netid and the hostid of the following IP addresses. a) 132. 56.8.6 b) 208 . 34. 54. 12 6 Compare circuit switching and packet switching. 7. State the services offered by TCP to application layer 8 Define choke packet and what does is it indicate. 9 State the two types of DNS messages and their purpose. 10 Define the purpose of firewall and list the types of firewall PART=B Note: Answer any five questions 11 a) Summarize the differences between ISO-OSI and TCP/IP reference model b) Explain about the different transmission media (5 x 10 = 50 Marks) 12 a) Illustrate the CRC error detection method for the given dataword 1010011110 and the divisor 10144/by,computing the codeword. b) Demonstrate Go-Back*N ARQ protocol with an example. 13 a) Compare Virtual Circuit network and Datagram network. b) =a Classful Addressing. 14 a) the different scenarios of connection establishment in TCP with pe picbessiariats illustrations. b) Dis¢Uss about the various open-loop congestion control 15 a) Distinguish between the two DNS name resolution mechanism with an example. b) Explain the functions of network management system 16 a) Compare the different topologies for interconnecting devices. b) Explain the CSMA/CD multiple channel access protocol 17 a) Discuss about ARP protocol. b) Write notes on Digital Signatures. teensCode No: D-2204/M/BLIAICTE FACULTY OF ENGINEERING a B.E. (CSE) VI Semester (AICTE) (Main& Backlog) Examination September! October - 2022 Subject: Computer Networks Time: 3 Hours Max. Marks: 70 (Missing data, if any, may be suitably assumed) PART-A i Note: Answer all the questions. (10 x 2 = 20 Marks) 4. What are the two types of line configuration? 2. In what situation multiplexing is used? 3. Classify the responsibilities of data link layer. 4. Define single bit error and burst bit error. 5. What is meant by piggybacking? 6. How errors are detected using CRC? 7. What are the fields on which the UDP checksum is calculated? Why? 8. List the services provided by end-to-end services 9. Define the two types of user agents in the electronic mail system. 10. Distinguish active and passive attack with example PART-B Note: Answer any five questions. (5 x10 = 50 Marks) 44. (a) Compare and contrast OSI model with TCP/IP model. (b) Distinguish between TDM and FDM. 12. (a) Explain in detail the error detection and error corrections. (b) Demonstrate sliding window protocol for data link layer. 43. (a) Write ashort notes on packet switching and circuit switching. (b) Is the ‘format of a RARP request packet is same as that of ARP request packet? Justify. 44. (a) Explain the TCP transmission policy with the help of a neat diagram. (b) Describe about congestion control in frame relay. 15. (a) Discuss how simple mail transfer protocol (SMTP) works? Can multimedia messages be transmitted using SMTP? (b) Identify the possible threats for RSA algorithm and list their counter measures. 16. (a) Mention the strengths and weakness of Data Encryption Standard (DES) algorithm (b) Explain the transport layer connection management. 17. Write short notes on: (a) Bluetooth (b) DHCP (c) SubnettingCode No: 14710/CBCS FACULTY OF ENGINEERING BE VI - Semester (CSE) (CBCS) (Backlog) Examination, March / April 2021 Subject: Computer Networks & Programming Time: 2 Hours Max Marks: 70 Note: Missing data, if any, may be suitably assumed PART-A Answer any five questions. (5x2=10 Marks) 1 Define Socket. 2. Differentiate between TCP and UDP. 3. What are the services of Transport layer? - 4 Whatis an IP address? OM 5 List the applications of UDP. & What do you mean by DNS? f 7 What common software problems lead to network defects? 8 Whatis a Gateway? 9 How many layers are there in the OSI model? Name them 10 Differentiate between static IP addressing and dynamic IP gddressing. PART -, ‘Answer any four questions. (4x15= 60 Marks) 11 (a) What are the functions of the network la tthe design issues in it (b) Explain about the key design issues in networkayer 12 Explain the different IP address class€Sjin detail 13 (a) Discuss the TCP service m «: (b) Draw the UDP segment hi at and explain its various fields 14 (a) Discuss the DNS name's} (b) Explain the SMTP es MIME 45 (a) Explain the socket address? (b) Discuss the%agynghronous 1/0? 46 (a) What i stion control? Discuss the general principles? (b) Discuss té congestion control in virtual circuit? 17 Write notes on: (a) Quality of Service (QOS) (b) Load sheddingCode No. 15220/AICTE FACULTY OF ENGINEERING B.E. VI- Semester (AICTE) (CSE) (Main) Examination, October 2024 Subject: Computer Networks Time: 2 Hours Max marks: 70 Miseing data, if any, may be suitably assumed PART-A Note: Answer any five questions. (5x2=10 Marks) State the difference between Protocol and Service List the different addresses in TCP/IP protocol and the layers they correspond fo on Define Hamming distance. Compute the Hamming distance between the words 40101 and 11011 4. State the differences between 1-persistent, non-persistent “and p-persistent CSMA protocols, 5, Translate the following IPv4 addresses into Dotted Decimal notation and tell thelPv4 class to which they belong. a) 01111111 11110000 01100111 01111104 b) 11101444 11140111 11000111 00011101 6. State the purpose of Tunnelling 7. Whatare the elements of transport layer? 8. Define the four flow characteristics 9. Define the purpose of MIME 40. State the five services provided by Network Security PART -B Note: Answer any, four questions. (4x15=60Marks) 411.2) Explain the ISOS! reference model layer functions with a neat diagram 5) Compare the fwo TDM multiplexing techniques with example 42 2) Use thé’CHECKSUM method for error detection to calculate the checksum for the following for the following five 4-bit datawords (7,11,12,0,6) sent by a sender to receiver b) Distinguish between Go-Back-N and Selective — Repeat ARQ protocols, 43.2) Explain the IPv4 Header with the help of a neat diagram, State two differences \Pv6 has in comparison to |Pv4 b)Explain Distance Vector Routing algorithm with a suitable example 14, 2) Discuss the purpose of various fields of the TCP segment header )) Explain the Leaky Bucket mechanism used for traffic shapiry from token bucket. aan ee hryaes <. Code No. 15220 ja) Write short note on DNS. ublic key encryption algorithm with a suitable example b) Explain RSApI 46.a) Compare the different XDSL types b) Discuss CSMACD multiple channel access protocol 47. a) Write about Ope Shortest Path First gateway protocol b) Differentiate between SMTP, POP3 and IMAP protocols. QO no