A

<Minor/Major> Project Report

On

__________________________________________________
Submitted to

CHHATTISGARH SWAMI VIVEKANAND TECHNICAL UNIVERSITY,

BHILAI

in partial fulfillment of requirement for the award of degree of

Bachelor of Technology
In

Department of Computer Science & Engineering

< SEMESTER 3rd / 4th / 5th /6th /7th/ 8th >
By
< Student Name 1, CSVTU Roll No. 1, Enrollment No. 1 >

< Student Name 2, CSVTU Roll No. 2, Enrollment No. 2 >

< Student Name 3, CSVTU Roll No. 3, Enrollment No. 3 >

< Student Name 4, CSVTU Roll No. 4, Enrollment No. 4 >

< Student Name 5, CSVTU Roll No. 5, Enrollment No. 5 >

Under the Guidance of

<Name of Guide>
<Designation>

DEPARTMENT OF < NAME OF THE DEPARTMENT >,

RUNGTA COLLEGE OF ENGINEERING & TECHNOLOGY,
KOHKA-KURUD ROAD, BHILAI, CHHATTISGARH, INDIA

Session : 202x-202x
 DECLARATION

< I / We>, the undersigned, solemnly declare that this report on the
project work entitled “____________________________________________”,
is based on < my / our> own work carried out during the course of < my / our>
study under the guidance of <Guide’s Name>.

< I / We> assert that the statements made and conclusions drawn are an
outcome of the project work. < I / We> further declare that to the best of
<my/our> knowledge and belief the report does not contain any part of any
work which has been submitted for the award of any other degree/diploma/
certificate in this University or any other University.

Signature<s>

< Student Name 1 >

< CSVTU Roll No. 1 >
< Enrollment No. 1 >

< Student Name 2 >

< CSVTU Roll No. 2 >
< Enrollment No. 2 >

< Student Name 3 >

< CSVTU Roll No. 3 >
< Enrollment No. 3 >

< Student Name 4 >

< CSVTU Roll No. 4 >
< Enrollment No. 4 >

< Student Name 5 >

< CSVTU Roll No. 5 >
< Enrollment No. 5 >
 CERTIFICATE

This is to certify that this report on the project submitted is an outcome of the
project work entitled
“-----------------------------------------------------------------------------------------------
”, carried out by the students in the DECLARATION, is carried out under my
guidance and supervision for the award of Degree in Bachelor of Technology
in < Name of the Department > of Chhattisgarh Swami Vivekanand
Technical University, Bhilai(C.G.), India.

To the best of my knowledge the report...

i) Embodies the work of the student(s) themselves,

ii) Has duly been completed,

iii) Fulfills the requirement of the Ordinance relating to the B.Tech. degree
of the University, and

iv) Is up to the desired standard for the purpose for which it is submitted.

< Signature >

< Name of Guide >
< Designation >

This project work as mentioned above is hereby being recommended and

forwarded for examination and evaluation by the University,

< Signature >

Dr.Tripti Sharma
Head & Professor
Department of Computer Science & Engineering
Rungta College of Engineering & Technology,
Kohka - Kurud Road, Bhilai(C.G.), India
 CERTIFICATE BY THE EXAMINERS

This is to certify that this project work entitled

“-----------------------------------------------------------------------------------------------
”,

submitted by…

< Student Name 1, CSVTU Roll No. 1, Enrollment No. 1 >

< Student Name 2, CSVTU Roll No. 2, Enrollment No. 2 >

< Student Name 3, CSVTU Roll No. 3, Enrollment No. 3 >

< Student Name 4, CSVTU Roll No. 4, Enrollment No. 4 >

< Student Name 5, CSVTU Roll No. 5, Enrollment No. 5 >

is duly examined by the undersigned as a part of the examination for the award
of Bachelor of Technology degree in < Name Of The Department> of
Chhattisgarh Swami Vivekanand Technical University, Bhilai.

Internal Examiner External Examiner

Name & Signature Name & Signature

Date: Date:
 ACKNOWLEDGEMENT

It is a matter of profound privilege and pleasure to extend < my / our > sense of respect and
deepest gratitude to < my /our > project guide ------------------------ , Department of < Name
of The Department> under whose precise guidance and gracious encouragement < I / we >
had the privilege to work.

< I / we > avail this opportunity to thank respected Dr. Tripti Sharma, Head of the
Department of Computer Science and Engineering for facilitating such a pleasant
environment in the department and also for providing everlasting encouragement and support
throughout.

< I / we > acknowledge with the deep sense of responsibility and gratitude the help rendered
by respected Dr. Y. M Gupta, Principal, Rungta College of Engineering and Technology,
Bhilai for infusing endless enthusiasm & instilling a spirit of dynamism.

<I /we > would also like to thank many people in < my/our > college, faculty members of
< my/our > department, and the supporting staff for always being helpful over the years.

Last but not least, <I /we > would like to express < my/our > deepest gratitude to < my/our >
parents and the management of Rungta College of Engineering and Technology, Bhilai
respected Shri Santosh Ji Rungta, Chairman, respected Dr. Sourabh Rungta, Director,
Technical, and respected Shri Sonal Rungta, Director, Finance & Administration for their
continuous moral support and encouragement.

<I /we > hope that <I /we > will make everybody proud of < my / our > achievements..

< Student Name 1, CSVTU Roll No. 1, Enrollment No. 1 >

< Student Name 2, CSVTU Roll No. 2, Enrollment No. 2 >

< Student Name 3, CSVTU Roll No. 3, Enrollment No. 3 >

< Student Name 4, CSVTU Roll No. 4, Enrollment No. 4 >

< Student Name 5, CSVTU Roll No. 5, Enrollment No. 5 >

 Table of Contents
Abstract i
List of Tables ii
List of Figures iii
List of Abbreviations iv
Chapter Title Page No.

1 Introduction ()

2 Literature Review ()

3 Problem Identification ()

4 Methodology ()
4.1
4.1.1
4.1.1.1
4.2
4.2.1
4.2.2
4.2.2.1
4.3
4.4

5 Results ()

6 Conclusion ()

7 Shaastrarth Certificate ()

8 Any Other Certificates of Publications ()

Bibliography

[1] Name of author , “Title of paper”, Published in, volume, Page No., Year of
publication.
[2] Name of author, “Name of the Book”, published by, Edition, Year.

Appendix
Programs, Datasheets used for various components, full papers presented in various Journals
and seminars.
 COLOR OF PROJECT REPORT

4th Year Red

3rd Year Green
2nd Year Blue

NUMBER OF COPIES = N+3 (HARD BOUND FOR 8TH SEM, ELSE

SPIRAL BOUND)
‘N’ IS TOTAL NUMBER OF THE STUDENTS IN THE GROUP

1) TWO COPIES HAVING ALL NAMES OF THE GROUP

MEMBERS, TO BE SUBMITTED TO… A) GUIDE,
B) DEPARTMENT, C) COLLEGE LIBRARY.
2) OTHER ‘N’ WILL BE INDIVIDUAL COPIES WITH
INDIVIDUAL STUDENT NAME FIRST.

3) USE JK BOND OR EXECUTIVE BOND PAPER ONLY.

4) NUMBER OF PAGES - BETWEEN 40 TO 50.

 General Formatting Instructions
Tables
Tables should be self-explanatory. Headings and the column/row entries should be clearly
related. Tables less than half a page should be preceded or followed by the text. All tables
should be numbered with Arabic numerals, consecutively throughout the report. The table
numbers should start with the chapter number in which the table has been placed (Example:
Tables in chapter 2 should bear the numbers like: 2.1, 2.2, 2.3, etc.)
Formulae/Equations/Expressions
Mathematical Formulae/Equations/Expressions should be carefully made by computer. They
should not be included in text lines, but should be placed in the proper position with a tab
from left margin and in between lines of text. They must bear a number started with the
number of chapter in which placed (Example: Equation in chapter 5 should bear the numbers
like 5.1, 5.2, 5.3, etc.). The equations numbers should be right aligned and are to be put
within parenthesis.
Illustrations/Figures/Images/Photographs
Illustrations used in the report must appear in all the copies. Illustrative materials may be line
drawings, photographs, graphs, block diagrams, flowcharts, etc. Illustrations may be inserted
wherever needed in the text, numbered in Arabic numerals typed on a project paper below the
illustration. The illustrations must be prepared using computer. The size of illustrations could
be reduced photographically. The figure numbers should start with the chapter number in
which the figure has been placed (Example: Figures in chapter 2 should bear the numbers
like: 2.1, 2.2, 2.3, etc.). In case color of the figure/illustration/image/photograph is important,
color printouts may be added.
Paper to be used
The original project as well as the photocopies should be prepared on a good quality white
bond paper of A4 size. All pages must have 1.3” margin on the left and 1” on the right and on
the top and bottom, with no gutter.
Typing
The general text of the manuscript should be typed in 1.5-space and tables/long
quotations/foot notes/Abstract in single space. The general text should be typed using 12-font
size with Times New Roman. The heading of an article to be typed in font size 14 (Times
New Roman) with all Uppercase Letters whereas sub articles should be in font size 14 (Times
New Roman) in small caps style. Normally the project is to be typed in black ink.