Scribd
Upload
10 views

signal-simulation-and-generation-using-matlab-and-vector-signal-generator

The document presents a simulation and generation of BPSK+BOC (5,2) signals using MATLAB and a Vector Signal Generator, aimed at testing various parameters of the signal. It details the modulation scheme used for the IRNSS satellite navigation system and describes the implementation process for generating the composite signal. The work concludes with successful testing of the generated signal and suggests that the method can be applied to create other complex waveforms.

Uploaded by

Muhammad Usama
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

signal-simulation-and-generation-using-matlab-and-vector-signal-generator

The document presents a simulation and generation of BPSK+BOC (5,2) signals using MATLAB and a Vector Signal Generator, aimed at testing various parameters of the signal. It details the modulation scheme used for the IRNSS satellite navigation system and describes the implementation process for generating the composite signal. The work concludes with successful testing of the generated signal and suggests that the method can be applied to create other complex waveforms.

Uploaded by

Muhammad Usama
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

BPSK+BOC (5,2) SIGNAL SIMULATION AND GENERATION USING

MATLAB AND VECTOR SIGNAL GENERATOR

Authors: Presenter:
ANSHUMAN SHARMA ANSHUMAN SHARMA
M R RAGHAVENDRA
V RAJU SAGI

Date : 10TH July, 2014


MATLAB EXPO
Presentation Outline

Motivation

Scope and Objective

BPSK+BOC modulation

Implementation

Simulated spectrum

Conclusion & future work

References
Motivation

BPSK+BOC (5,2) signal simulation and generation using MATLAB


and Vector signal generator
Scope and Objective

Scope :
Simulation and generation of BPSK+BOC(5,2) signal at L5 and S
band.
Objective:

 Generation of above signal to test Vector Signal Analyzer for following


parameters:

• Error Vector magnitude EVM


• Carrier Suppression
• Magnitude Error
• Gain Imbalance
• Quadrature Error
• The constellation points
BPSK+BOC modulation

• IRNSS is an autonomous regional satellite navigation system being


developed by ISRO.

• Works at L5 and S band and will provide two types of service--


Standard Positioning Service (SPS)
Restricted Service (RS)

• Modulation scheme : BOC + BPSK modulation

• The SPS @ 25bps is spreaded at ~ 1Mcps and BPSK modulated.

• The RS @ 25bps is spreaded at ~ 2Mcps and BOC modulated.

• BOC(m, n) : where fsc= m*f and fc= n*f. f is the reference frequency.

fsc is square subcarrier frequency and fc is the chipping rate.


Implementation

BASEBAND SIGNAL
RF OUTPUT
SIMULATION LAN I COS
USING MATLAB DEVICE UNDER TEST
AWG LO (VSA)

PC SIN
Q

VECTOR SIGNAL GENERATOR


Implementation contd…

• For BPSK : PN7 sequence at 1 Mbps is generated using


MATLAB.

• For BOC:
 PN9 sequence at 2 Mbps is generated using MATLAB.

 Modulated on to a square wave subcarrier at 5MHz to create the


BOC baseband signal.

S boc(t) = s(t) * sign[sin(2πfsct)]

• The two signals are added to simulate the composite baseband


BPSK+BOC(5,2) signal.
Simulated Spectrum
Simulated Spectrum
Conclusion and future work

 This work was aimed at generation of BPSK+ BOC modulated composite


signal.

 The composite signal was generated using MATLAB and VSG.

 Using this signal, Vector signal analyzer was successfully tested and qualified.

 Same concept can be used for generating any type of Complex waveform.
References
References

[1] R N Mutagi, “Pseudo noise sequences for engineers”, ELECTRONICS & COMMUNICATION
ENGINEERING JOURNAL, APRIL 1996.

[2] Emilie Rebeyrol, et al.,“Interplex Modulation for Navigation Systems at the L1 band" , ION NTM
2006, 18-20 January 2006, Monterey, CA

[3] Vladimir Kharisov, et al., “Optimal aligning of the sums of GNSS Navigation signals”, Jan/Feb
2012, www.insidegnss.com
THANK YOU

You might also like