Scribd
Upload
5 views18 pages

Uni Magadh Part 3 Modulation

The document discusses modulation and demodulation in communication systems, highlighting the importance of modulation for effective signal transmission over long distances. It outlines various challenges in communication, such as signal attenuation, antenna size, noise interference, and costs associated with low-frequency instruments. Additionally, it describes different types of modulation techniques, including amplitude, frequency, and phase modulation, and their applications in electronic communication.

Uploaded by

manishkr6565
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views18 pages

Uni Magadh Part 3 Modulation

The document discusses modulation and demodulation in communication systems, highlighting the importance of modulation for effective signal transmission over long distances. It outlines various challenges in communication, such as signal attenuation, antenna size, noise interference, and costs associated with low-frequency instruments. Additionally, it describes different types of modulation techniques, including amplitude, frequency, and phase modulation, and their applications in electronic communication.

Uploaded by

manishkr6565
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

e-Content for B.

Sc Physics Honours students


of
RAM RATAN SINGH COLLEGE,
A CONSTITUENT UNIT OF PATLIPUTRA UNIVERSITY,
MOKAMA, PATNA

TOPIC: MODULATION AND DEMODULATION

DR. AYAN MUKHERJEE


ASSISTANT PROFESSOR
RAM RATAN SINGH COLLEGE,
A CONSTITUENT UNIT OF PATLIPUTRA UNIVERSITY,
MOKAMA, PATNA
Communication System

The transmission of information from the sender to the recipient through some medium is
called as communication.

What is transmitted?

Mainly Audio, vedio and other data. They are mainly in low frequency range.
Although it is common in our perceptual experience that sending or receiving signals or
data is simple, but it involves quite complex procedures, possibilities and scenarios within
the communication systems.
During communication we face following problems:

1. Long distance transmission:


Low frequency signals get attenuated quickly in space while high frequency do not get
attenuated in space as fast as low frequency and can travel along long distance. This happens as
energy of signal is proportional to frequency. Thus if low frequency are used for some
application then strength will be less, resulting poor reception.

2. Antenna Size:
The antenna size is inversely proportional to the frequency of the radiated signal. The order of
the antenna aperture size is at least 1/10 th ( or ¼ th ) of the wavelength of the signal. Its size is
not practicable if the signal is 5 KHz; therefore, raising frequency by any process is required to
reduce the size of the antenna.
3. Noise to signal ratio:
Electrical noise is one of the principle limiting factors in the performance of communication
systems. The signal-to-noise ratio indicates the relative strengths of the signal and the noise in a
communication system. The stronger the signal and the weaker the noise, the higher the SNR.

4. Interference of different transmitted wave:

In signal transmission, the signals from various sources are transmitted through a common
channel simultaneously by using multiplexers. If these signals are transmitted simultaneously
with certain bandwidth, they cause interference.

5. Cost of Instruments:

Cost of instruments used in low frequency range is very high compared to high frequency based
instruments.
What is Modulation?

Modulation is a process of changing the characteristics of the wave to be transmitted by superimposing


the message signal on the high frequency signal. In this process video, voice and other data signals
modify high frequency signals – also known as carrier wave. This carrier wave can be DC or AC or pulse
chain depending on the application used. Usually high frequency sine wave is used as a carrier wave
signal.

In modulation technique, the message signal frequency is raised to a range so that it is more
useful for transmission.
Why modulation is used in communication?

1. Reduction in the height of antenna


2. Avoids mixing of signals
3. Increases the range of communication
4. Multiplexing is possible
5. Improves quality of reception

The above points describe modulation’s importance in communication system. Modulation is


important to transfer the signals over large distances, since it is not possible to send low-frequency
signals for longer distances. Similarly, modulation is also important to allocate more channels for
users and to increase noise immunity.
Message Signal: It contains the information and in general of low frequency.

Carrier Signal: Used to transmit the message signal and of high frequency.

Modulated Signal: The resultant signal due to modulation.

Message Signal
Analog Modulation:
In this modulation, a continuously varying sine wave is used as a carrier wave that modulates the
message signal or data signal. The Sinusoidal wave’s general function is shown in the figure below,
in which, three parameters can be altered to get modulation – they are amplitude, frequency and
phase, so the types of analog modulation are:
Amplitude Modulation:
Amplitude modulation was the earliest modulation technique used to transmit voice by radio. This type of
modulation technique is used in electronic communication. In this modulation, the amplitude of the carrier
signal varies in accordance with the message signal, and other factors like phase and frequency remain
constant.
The modulated signal is shown in the below figure, and its spectrum consists of the lower frequency band, upper
frequency band and carrier frequency components. This type of modulation requires more power and greater bandwidth;
filtering is very difficult. Amplitude modulation is used in computer modems, VHF aircraft radio, and in portable two-way
radio
Frequency Modulation:
In this type of modulation, the frequency of the carrier signal varies in accordance with the message signal, and other
parameters like amplitude and phase remain constant. Frequency modulation is used in different applications like radar, radio
and telemetry, seismic prospecting and monitoring newborns for seizures via EEG, etc.
This type of modulation is commonly used for broadcasting music and speech, magnetic tape recording systems, two way radio
systems and video transmission systems. When noise occurs naturally in radio systems, frequency modulation with sufficient
bandwidth provides an advantage in cancelling the noise
Phase Modulation:
In this type of modulation, the phase of the carrier signal varies in accordance with the message signal. When the phase of
the signal is changed, then it affects the frequency. So, for this reason, this modulation is also comes under the frequency
modulation.
Generally, phase modulation is used for transmitting waves. It is an essential part of many digital transmission coding
schemes that underlie a wide range of technologies like GSM, WiFi, and satellite television. This type of modulation is used
for signal generation in al synthesizers, such as the Yamaha DX7 to implement FM synthesis.

You might also like