Confidential

Specifications For Approval

Product: 1.79” QCIF+ TFT LCM

Model No.:
Customer:

Approval
Customer
200 . . . 200 . . . 200 . . . 200 . . .
countersignature countersignature countersignature countersignature

Sign Sign Sign Sign

Status: Revision 0.0 July 16, 2007

Page 1 of 30
The information within this specification is highly confidential and cannot be shared with anyone except those people
covered under NDA who are needed to provide input to the design and production of samples.
 Confidential
Revision 0.0 July 16, 2007

Contents

Revision History ----------------------- (3)

1. General description ----------------------- (4)

2. Module Block Diagram ----------------------- (5)
3. Electrical Requirements ----------------------- (6)
3.1 Absolute Maximum Ratings
3.2 Electrical Characteristics
3.3 Input Pin Connections
3.4 AC Characteristics
3.5 Basic Color and Gray Scales
4. Optical Requirements ----------------------- (11)
4.1 Optical Specifications (Main AMLCD)
5. Qualification ----------------------- (15)
5.1 Inspection condition
5.2 Inspection Method (Sampling)
5.3 Inspection Category
5.4 Visual Inspection
5.5 Electrical Inspection
6. Reliability ----------------------- (23)
8.1 Items of reliability
7. Handling ----------------------- (24)
7.1 Handling
7.2 Handling and cleaning of LCD
7.3 Electrostatic shielding
7.4 Packing
7.5 Layout and How to use
7.6 Safekeeping
7.7 Safety
8. Mechanical Drawings ----------------------- (26)
9. Tray Drawings ----------------------- (27)
10. BOX Drawings ----------------------- (28)
11. FPC Circuit ----------------------- (29)
11. Part list ----------------------- (30)

Page 2 of 30
 Confidential
Revision 0.0 July 16, 2007

REVISION HISTORY

REV REVISION ITEM DATE

0 Initial version July 12, 2007

Page 3 of 30
 Confidential
Revision 0.0 July 16, 2007

1. GENERAL DESCRIPTION:
This product is a single display module, which has the color transmissive AMLCD(Active Matrix
Liquid Crystal Display) as a main display. This model is composed of the TFT-LCD module, driver
circuit and white LED back light unit. The general display module specifications are provided in
Table 1.1.1

Table 1.1.1 : General Display Module Specifications

Category Parameter Specification
Main LCD Display mode a-Si TFT AMLCD
Display type Transmissive
Display colors 65K & 262K
Active area 28.512mm(H) x 35.64mm(V)
Viewing area 32.4mm(H) x 39.82mm(V)
Number of pixels 176(H) x 220(V)
Pixel arrangement RGB stripe
Pixel size 0.054mm(H) x 0.162mm(V)
Display mode Normally White
Viewing Direction 12 O’clock
Panel F108GJ-1TU (CHI MEI)
LCD Driver LGDP4522 (LG)
Mechanical Overall Dimensions 35mm(H) x 59.23(V) x 2.85T
Backlight LED Backlight 3 White LED’s(1way)
Environmental Operating Temperature -20°C ~ 70°C
Operating Humidity 10 ~ 90%, noncondensing

Page 4 of 30
 Confidential
Revision 0.0 July 16, 2007

2. MODULE BLOCK DIAGRAM:

SYSTEM BOARD DISPLAY MODULE

/DISP_CS1,/LCDRESET,RS,
/WR,/RD,D01~D08, D10~D17 LCD Driver
MAIN LCD IC MAIN DISPLAY
INTERFACE TFT-LCD
LGDP4522
VCC, VBAT, IOVCC,
GND

VBAT,GND LED’s

Page 5 of 30
 Confidential
Revision 0.0 July 16, 2007

3. ELECTRICAL REQUIREMENTS:

3.1 Absolute Maximum Ratings:

Table 3.1.1: Absolute Maximum Ratings
Parameter Symbol Condition Rating Unit Remarks
Power supply (digital) VDD Ta=25°C -0.3 ~ + 3.0 V Note 1
Input voltage (digital) VID Ta=25°C -0.3 ~ + 3.3 V Note 1
Operating temperature T opr -- -40 ~ + 85 °C
Storage temperature T stg -55 ~ +125 °C

Note 1: If used beyond the absolute maximum ratings, the LSI may permanentiy be damaged.
It is strongly recommened to use the LSI at a condition within the electrical characteristics
for normal operation.

3.2 Electrical Characteristics:

Table 3.2.1: Operating Conditions
Parameter Symbol Minimum Typical Maximum Unit Remarks
Supply voltage VDD +2.4 +2.8 +3.3 V
Battery voltage VBATT +9.0 +9.9 +10.5 V
Input voltage - (High) VIH 0.8IOVcc -- IOVCC V
Input voltage - (Low) VIL -0.3 -- 0.2IOVcc V

Table 3.2.2: Current Consumption

Category Parameter Symbol Minimum Typical Maximum Unit Remarks
Stand by ISTB - 1.4 10 uA

Sleep ISLP - - 0.1 mA

Main
display
Still ISTL - 4.0 6.0 mA

Full IF - 8.0 10 mA

Table 3.2.3: Backlight Current consumption

Parameter Symbol Minimum Typical Maximum Unit Remarks
Current IB - 15 mA note 1
Power Consumption PBL - 149 mW note 2

Note 1 : Three LEDs are connected in series

Note 2 : Where IB = 15mA , VB = PBL / IB

Page 6 of 30
 Confidential
Revision 0.0 July 16, 2007

3.3 Input Pin Connections

Pin No. Symbol I/O Function

1 BL_K - Ground
2 BL_A I Battery voltage
3 IOVCC I Supply voltage
4 NC - -
5 RESET I RESET
6 DB17 I/O Data17
7 DB16 I/O Data16
8 DB15 I/O Data15
9 DB14 I/O Data14
10 DB13 I/O Data13
11 DB12 I/O Data12
12 DB11 I/O Data11
13 DB10 I/O Data10
14 NC - -
15 DB08 I/O Data8
16 DB07 I/O Data7
17 DB06 I/O Data6
18 DB05 I/O Data5
19 DB04 I/O Data4
20 DB03 I/O Data3
21 DB02 I/O Data2
22 DB01 I/O Data1
23 NC - -
24 RD I Read
25 WR I Write/read
26 RS I Select Register
27 CS I Chip select
28 VCC I Supply voltage
29 GND I Ground

Page 7 of 30
 Confidential
Revision 0.0 July 16, 2007

3.4 AC Characteristics:

3.4.1 Recommended Signal Timing (Main LCD)

80 - System bus interface operation

Page 8 of 30
 Confidential
Revision 0.0 July 16, 2007

Reset Timing

( Condition : Iovcc = 1.65V to 3.30V, VCC = 1.80V to 3.30V )

Page 9 of 30
 Confidential
Revision 0.0 July 16, 2007

3.4.2 Basic Colors and Gray Scales:

Table 3.4.1 provides a truth table defining the basic display colors and gray scales available in the
main AMLCD. A maximum of 262k colors is possible.

Table 3.4.2: Signals, Basic Display Colors, and Gray Scales – TFT LCD
Colors & Gray Data Signal
Gray scale R R R R R R G G G G G G B B B B B B
Scale Levels 0 1 2 3 4 5 0 1 2 3 4 5 0 1 2 3 4 5
Black -- 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue -- 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Green -- 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Cyan -- 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
Red -- 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Magenta -- 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Yellow -- 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White -- 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
⇑ GS1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Darker GS2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
⇑ ↓ ↓ ↓ ↓
⇓ ↓ ↓ ↓ ↓
Brighter GS29 1 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
⇓ GS30 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Red GS31 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
⇑ GS1 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0
Darker GS2 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0
⇑ ↓ ↓ ↓ ↓
⇓ ↓ ↓ ↓ ↓
Brighter GS61 0 0 0 0 0 0 1 0 1 1 1 1 0 0 0 0 0 0
⇓ GS62 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0
Green GS63 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Black GS0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
⇑ GS1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0
Darker GS2 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0
⇑ ↓ ↓ ↓ ↓
⇓ ↓ ↓ ↓ ↓
Brighter GS29 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1
⇓ GS30 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1
Blue GS31 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Note 1: In Table 3.4: 0 = Logic low, 1 = Logic high.

Page 10 of 30
 Confidential
Revision 0.0 July 16, 2007

4. OPTICAL REQUIREMENTS:

4.1 Optical Specifications (Main LCD):

Table 4.1 : Optical Characteristics (Main LCD)

Ta = 25°C , VDD=VBAT=3.3V, IBKL=15mA
Item Symbol Condition Min. Typ. Max. Unit Note

Contrast ratio C/R 150 250 - Note 4

Luminance of white YL - 200 - cd/m2 Note 5

Rising:Tr Tr+Tf - 15 -30

Response msec Note 6
time Falling:Tf Tf - 35 -50

Rx 0.604 0.634 0.664

Ry 0.298 0.328 0.358

Note1
Gx 0.266 0.296 0.326

Color Gy 0.545 0.575 0.605

Note 7
chromaticity
Bx 0.103 0.133 0.163
(CIE 1931)
By 0.083 0.113 0.143

Wx 0.281 0.311 0.341

Wy 0.317 0.347 0.377

θL 40 45 -
Hor.
θR 40 45 -
Viewing CR>10 Degrees Note 3
angle
θH 30 35 -
Ver.
θL 10 15 -

Page 11 of 30
 Confidential
Revision 0.0 July 16, 2007

Note 1
Measurement should be executed in a stable, windless, and dark room. 30 min after lighting the
Back-light. This should be measured on the center of screen.
Environment condition: Ta = 25 ± 2 ℃

Back-light ON condition

Back-light OFF condition

Page 12 of 30
 Confidential
Revision 0.0 July 16, 2007

Note 2
Definition of Reflectance: The reflectance is relative quantity to the standard white
BaSO4 or MgO plate that the reflectance of the standard white plate is the 100%

Light int ensity of the reflected light on LCD

Input intensity of the reflected light on BaSO4 plate
Reflectance =
Output intensity of the reflected light on BaSO4 plate
× 100%
Input intesity of the reflected light on BaSO4 plate

Note 3
Definition of Viewing Angle: Viewing angle range (CR≥10)
Normal Line
φ = 0 o, θ = 0 o

θ L

θ R

φ H 12 o’clock
φ L
θ L =90o x y direction
φ H = 90 o

x'
6 o’clock y'
direction θ R =90 o
φ L= 90 o

Note 4
Definition of Contrast Ratio (C/R): Ratio of gray max (Gmax) & gray min (Gmin) at the center
point of the panel. If front light is on state, it is the light source and the BM-5A will be used to
measure.

* Gmax : Luminance with all pixels white

G MAX
CR = * Gmin : Luminance with all pixels black
G MIN

Note 5
Definition of Luminance of White: Luminance of white at center point.

Page 13 of 30
 Confidential
Revision 0.0 July 16, 2007

Note 6
Definition of Response time: Sum of Tr, Tf

Note 7
Definition of Color Chromaticity (CIE 1931)
Color coordinate of white& red, green, blue at center point.

Page 14 of 30
 Confidential
Revision 0.0 July 16, 2007

5. QUALIFICATION

5.1 Inspection condition.

① Temperature • Humidity
- Room Temperature : 23±3°C
- Humidity : 60±20%
② Inspection distance and degree
- Keep distance over 30cm from LCD surface under the 20W lighting source from the
lamp.

Inspects from Z to X and Y within Φ(Φ=30°)

The distance should be kept over 30cm.

- LCD surface and light source has to be perpendicular and inspection should be done
within 30° from the inspection position (Z-axis) .

Display surface

Light source and LCD surface must

be aligned perpendicular.

Page 15 of 30
 Confidential
Revision 0.0 July 16, 2007

5.2 Inspection method (Sampling)

- General inspection.

1) Fail 1 (Heavy defect) : Unable to use product, cannot use product up to it’s expectation
and can not perform the standard of it’s purpose.

2) Fail 2 (Light defect) : Unstable and degraded product but still can be use.

3) Defect applied area : Active Area

4) Criterion : AQL of Fail 1 : 0.65, AQL of Fail 2 : 1.5

5.3 Inspection category

- Sampling procedures for each item’s acceptance level

Defect type Sampling procedures AQL

MIL-STD-105D Inspection level Ⅰ

Major defect normal inspection 0.65
single sample inspection

MIL-STD-105D Inspection level Ⅰ

Minor defect normal inspection 1.5
single sample inspection

- Definition of Black / Spot or Line

Item Criterion for defects

Spots or lines appear dark or white in display patterns

Black / White spots (Ⅰ)
and remain unvaried in terms of size or shade with varying the LCD
Black / White lines (Ⅰ) operating voltage.

Spots or lines appear dark or white in display patterns

Black / White spots (Ⅱ)
and they are variable in terms of size or shade with varying the LCD
Black / White lines (Ⅱ) operating voltage.

Page 16 of 30
 Confidential
Revision 0.0 July 16, 2007

5.4 Visual inspection

ITEM Criterion for defects Defect type

1) Non display • No non display is allowed Major
2) Irregular operation • No irregular operation is allowed Major
3) Short • No shorts are allowed Major

• Any segments or common patterns that don’t activate

4) Open Major
are rejectable.

Size Ø (mm) Acceptable number

5) Black / White Ø ≤ 0.15 Ignore
0.15 < Ø ≤ 0.20 3 Minor
spot (Ⅰ)
0.20 < Ø ≤ 0.30 2
0.30 < Ø 0

Length (mm) Width (mm) Acceptable number

6) Black / White 10 < L 0.03 < W≤ 0.04 5
5.0 < L ≤ 10 0.04 < W≤ 0.06 3 Minor
line (Ⅰ)
10 < L ≤ 5.0 0.06 < W≤ 0.07 2
L ≤ 1.0 0.07< W≤ 0.09 1

Size Ø (mm) Acceptable number

7) Black / White Ø ≤ 0.30 Ignore
0.30 < Ø ≤ 0.50 5 Minor
spot (Ⅱ)
0.50 < Ø ≤ 1.20 3
1.20 < Ø 0

Length (mm) Width (mm) Acceptable number

8) Black / White 20 < L 0.05 < W≤ 0.07 5
10 < L ≤ 20 0.07 < W≤ 0.09 3 Minor
line (Ⅱ)
5.0 < L ≤ 10 0.09 < W≤ 0.10 2
L ≤ 5.0 0.10< W≤ 0.15 1
1) No Lighting is reject able
2) Flickering and abnormal lighting are rejectable
9) Back Light
※ In case of the model with back light
(E/L, LED or CCFT type)

Page 17 of 30
 Confidential
Revision 0.0 July 16, 2007

ITEM Criterion for defects Defect type

10) Display pattern Minor

[Unit: mm]
A+B ≤ 0.30 D+E ≤ 0.25 F+G ≤ 0.25
0<C
2 2 2

Note : 1) Acceptable up to 3 damages

2) NG if there’re two or more pinholes per dot
11) Blemish &
Foreign matters Size Ø (mm) Acceptable number
Ø ≤ 0.15 Ignore
Size: Ø=(A+B)/ 2 Minor
0.15 < Ø ≤ 0.20 3
A 0.20 < Ø ≤ 0.30 2
0.30 < Ø 0
B

Length (mm) Width (mm) Acceptable number

Ignore W≤ 0.03 Ignore
L < 2.0 0.03 < W≤ 0.05 Ignore
12) Scratch on L > 2.0 1
L > 1.0 0.05 < W≤ 0.08 1 Minor
Polarizer
L ≤ 1.0 Ignore
Note (1) 0.08< W Note (1)

Note (1) Regard as a blemish

Size Ø (mm) Acceptable number

13) Bubble in Ø ≤ 0.20 Ignore

0.20 < Ø ≤ 0.50 3 Minor
Polarizer
0.50 < Ø ≤ 0.80 2
0.80 < Ø 0

14) Stains on LCD Stains which cannot be removed even when wiped lightly with
Minor
panel surface a soft cloth or similar cleaning too are rejectable.

Page 18 of 30
 Confidential
Revision 0.0 July 16, 2007

ITEM Criterion for defects Defect type

15) Rust in Bezel Rust which is visible in the bezel is rejectable. Minor

16) Defect of land

surface contact (Poor Evident crevices which is visible are rejectable. Minor
soldering)

(1) Failure to mount parts Major

17) Parts mounting (2) Parts not in the specifications are mounted Major
(3) Polarity, for example, is reversed Major

(1) LSI, IC lead width is more than 50% beyond pad outline. Minor
18) Parts alignment
(2) Chip component is off center and more Minor

(1) 0.45 < Ø , N≥1

Major
19) Conductive (2) 0.30 < Ø ≤ 0.45 , N≥1
Minor
foreign matter(Solder Ø: Average diameter of solder ball (unit: mm)
ball, solder chips) (3) 0.50 < L , N≥1
Minor
L: Average length of solder chip (unit: mm)

Page 19 of 30
 Confidential
Revision 0.0 July 16, 2007

5.5 Electrical inspection

Defect Type Accept Reject

Bright dot (Fig 1)

N <= 7 N>7
Random

N <= 3 N>3
Two adjacent

Dark dot (Fig 2)

N <= 7 N>7
Random N <= 4 N>4
Two adjacent N <= 2 N>2
Three adjacent

Four or more adjacent Not allowed

Maximum allowable number of dot defect N <= 14 N > 14

Minimum distance between defects (Fig 3) L => 4mm L => 4mm

bright dot – to – bright dot Don’t’ care Don’t’ care
dark dot – to – dark dot Don’t’ care Don’t’ care
bright dot – to – dark dot

[ L : length, N : count ]

Inspection pattern for electrical defect should be pure R,G,B Black and White.

Light leakage not allowed

Image sticking image sticking pattern shall not be to persist longer than 10 seconds in
the next pattern

Glue / stain / dirt glue, non-removable stain and dirt which are visible in the inspection area
are not acceptable.

Page 20 of 30
 Confidential
Revision 0.0 July 16, 2007

Fig 1. Bright dot defect description

(Good) (N.G)

* adjacent two dots in horizontal direction will be considered as one dot

Fig 2. Dark dot defect description

[ two adjacent ]

(Good) (N.G)

* adjacent two dots in horizontal direction will be considered as one dot

Page 21 of 30
 Confidential
Revision 0.0 July 16, 2007

Fig 2. Dark dot defect description – continued

[ three adjacent ]

(Good) (N.G)

Fig 3. Minimum distance between dot defects

[ Bright dot - to - Bright ]

4mm 3.9mm

(Good) (N.G)

Page 22 of 30
 Confidential
Revision 0.0 July 16, 2007

6. RELIABILITY

6.1 Items of reliability

All test result of items should be judged in 1 hour recovery time at room temperature.

ITEM Condition Criterion

1) high temperature
Ta = +70°C,96hrs
operating

2) Low temperature
Ta = -20°C,96hrs
operating
• After testing, cosmetic defects
should not happen.
3) Humidity Ta = +60°C,90%RH, 96hrs
• Contrast ratio should not happen
lower than 10% of initial value.
4) High temperature
Ta = +80°C,96hrs
storage • Total current consumption should
not be over 10% of initial value.
5) Low temperature
Ta = -20°C,96hrs
storage

6) Temperature -30°C(0.5hr) 80°C(0.5hr),

humidity cycle 200cycles

• Not allowed cosmetic and electrical

1.Sine, 1.5G, 2~200Hz, 1hr/X,Y,Z defects.
direction
7) Vibration (Note1)
2.Random, 1.5Grms, 5~200Hz,
15min/X,Y,Z direction test will be performed at state of
carton box, not each of the modules
• After testing, cosmetic and electrical
200pF 0Ω ±200V defects should not happen.
8) Static Electricity
• Total current consumption should be
below double of initial value.

Note
All tests above are practiced at module type
There is no display function NG issue occurred, all the cosmetic specification is judged before the
reliability stress

Page 23 of 30
 Confidential
Revision 0.0 July 16, 2007

7. HANDLING

7.1 Handling

- LCD module is composed of the fragile glass attached weak polarizer film. Thus it can
be damaged easily. Everyone needs to handle very carefully without shock by
dropping and damage or dust on the surface.

7.2 Handling and cleaning of LCD

- While cleaning LCD module (see below) take soft cloth and wipe it carefully with
cleaning solvent.
◎ Isopropyl alcohol
◎ Ethyl alcohol
◎ Trichloroethylene

- To prevent damage to module, do not wipe with hard fabric.

Do not use below cleaning solvent.
◎ Water
◎ Ketone
◎ Aromatics

- To prevent damage to ITO pad

◎ HCFC
◎ Soldering flux
◎ CI, S
◎ Spittle, Fingerprint

- Products include pad to prevent corrosion to ITO.

Hahotech recommend that all products include pad to it’s products.
If customer damages ITO using chemicals or solvent not recommend by manufacture,
than customer is liable and responsible for the damages caves to product.

7.3 Electrostatic Shielding

- LCD modules uses C-MOS LSI driver, so we recommend our customer as so;
Do not press key or send signals before power on. In order to prevent additional
electrostatic damage, should do earth any operator and tools for the product
manufacturing. When removing the protective film from LCD, electrostatic damage
happens. Therefore we are continuously testing to countermeasure against electrostatic
damage and making sure the shielding method for the product safety.

7.4 Packing

- It is standard to keep LCD modules in package.

Please note below when keeping out of package.
- LCD modules are composed of glass, so be careful not to put pressure, impact or drop
it in anyway.
- To prevent damages do not place it in high temperature/humidity, Also when safe keeping
do not directly place in sun.

Page 24 of 30
 Confidential
Revision 0.0 July 16, 2007

7.5 Layout and How to use

- In case not following normal POWER ON, OFF order, can nausea damages that are not
recoverable.
Also not following normal procedures can cause permanent damages.

- Using under below the normal operating temperature the response time can be delayed
and using under higher operating temperature the color can show darker than normal.
But these conditions do not mean the LCD is a defect.
It will recover back to normal, once using it in a normal operating temperature.

- Color of LCD can change if put to a pressure, and will not operate normal.
So, the layout must show that LCD modules can be protected with think layer of
protection under pressure.

- Do not force or pull the LCD module connector or cables.

TAIL draws a plan not to become TOUCH at the region which the transit does
FOLDER HINGE.

- VDD of LCD MODULE POWER LINE must draw a plan in SET WINDOW.

- Needs to be design up to the EMI standards.

- The design must do SET WINDOW so that it is suitable to VIEWING AREA.

- The mark characteristic except VIEWING AREA can not guarantee.

7.6 Safekeeping

- Do not place under direct fluorescent light or beam of light.

- Do not place near water or where water can reach, can cause erosion and rust.

- We do at a polarizer surface lest the store it should be touched you being due to at
anything.
The encouragement does with the outgoing putting at an inside courage to keep.

7.7 Safety
- Do not open module, can cause damages from sharp objects.

- In case of breaking the LCD, a liquid can leak from it.

If come in contact with liquid, wash off with water immediately.

- Do not touch LCD module with bare hands, can cause static electricity.

Page 25 of 30
Page 26 of 30
Revision 0.0

8. MECHANICAL DRAWINGS

LGDP4522

* NOTE

1. LCD SPEC.
1) LCD: 1.79" 176 x 220 TFT(Hanstar) + TL1769(Tomato)
2) Veiwing Angle: 12 O'clcok
3) Display color: 65K or 260K

2. Back Light Unit

1) White LED 3 chip (Serial / 1 way)

2) 전압 = 9.9V , 전류 = 15mA
July 16, 2007
Confidential
 Confidential
Revision 0.0 July 16, 2007

9. TRAY DRAWINGS

Page 27 of 30
 NO. ITEM CODE Dimension Q'nty Remark

1 Cushion-Sponge - 385*280*5 2EA PE Sheet

Page 28 of 30
1
Revision 0.0

2 Plastic-Tray HTN179000S 384*278*12 32EA PP Tray

3 LCD Module HTN179000S 59.23*35*2.85 640EA

20 EA / PP Tray 4 Dummy Plastic-Tray HTN179000S PP Tray Cap

384*278*12 1EA
2
10. BOX DRAWINGS

5 Box-Inner - 388*282*92 4EA

3 6 Box-Carton - 430*310*430 1EA

4 PP Tray : 8 EA

160 EA / Box-Inner

Box-inner : 4 EA

■
Total Solution For
Flat Panel Displqy Business

6
July 16, 2007
Confidential

( )
 Confidential
Revision 0.0 July 16, 2007

11. FPC Circuit

Page 29 of 30
 Confidential
Revision 0.0 July 16, 2007

12. Part list

Page 30 of 30