SRM INSTITUTE OF SCIENCE AND TECHNOLOGY

FACULTY OF SCIENCE AND HUMANITIES

DEPARTMENT OF COMPUTER SCIENCE

PRACTICAL RECORD NOTE

STUDENT NAME :
REGISTER NUMBER :
CLASS : B.COM (ISM)
YEAR & SEMESTER : II SEMESTER
SUBJECT CODE : UIS20202J
SUBJECT TITLE : MANAGEMENT OF
INFORMATION SYSTEM

MAY, 2024
 BONAFIDE CERTIFICATE

Certified that this record book is a bonafide practical work

done by

Register No. of B.COM (ISM) Degree course

for – UIS20202J MANAGEMENT OF INFORMATION SYSTEM in
the Computer Science lab in SRM Institute of Science and Technology
during the academic year 2023 – 2024.

Head of the Department Staff In Charge

Submitted for Semester Practical Examination held on

Internal Examiner External Examiner

 CONTENT

EX.NO. DATE TITLE SIGN

1 Construction Of Frequency
Table
2 Graphical Representation Of
Data
3 Distribution Of Skewness
And Kurtosis
4 Subdivided Bar Graph
(Cluster Analysis)
5 Calculation Of Correlation
Coefficient
6 Calculate Method Of
Dispresion
7
Non Parametric Test
8
Test Of Significance for
Single Or Two Samples
9
One way ANOVA
10 Two way ANOVA
Ex.No:01 Construction of Frequency Table
Date:

Aim:
To construct frequency table for updated fields in dataset.
Procedure:
Step 1: Go to start menu  All programIBM SPSS statistics and select
IBM SPSS statistics 20
Step 2: The software opens out of the two viewsdata and variable,
choose variable view.
Step 3: In the variable view, enter the field you will have in your
frequency table and define their type and size.
Step 4: After entering the field in the variable view, shift to data view
and you can see your fields are ready to take inputs, so enter inputs for
the field.
Step 5: Go to analyze in the menu bardescriptive statisticschoose
frequencies. Frequencies dialog box will open. Select the fields you
want in your output opens, click OK and output opens.
INPUT:

Output:
RESULT:
Thus, the program has been completed successfully.
Ex.No:02 Graphical representation of data
Date:

Aim:
To represent the data graphically, bar chart pie chart and histogram multi
pie chart. subdivided bar diagram

Procedure:
Step 1: Go to start menu  All programIBM SPSS statistics and select
IBM SPSS statistics 20
Step 2: The software opens out of the two viewsdata and variable,
choose variable view.
Step 3: In the variable view, enter the field you will have in your
frequency table and define their type and size.
Step 4: After entering the field in the, variable view, shift to data view
and you can see your fields are ready to take inputs, so enter inputs
for the field.
Step 5: Go to analyze in the menu bardescriptive statisticschoose
frequencies. Frequencies dialog box will open. Select the fields you
want in your output opens, click OK and output opens.
Step 6: on the right side, you can see option, choose chart from the
options. Chart dialog box opens. Select the type of chartbar, pie or
histogram, you want and click OK.
Input:

Output:
 RESULT:
Thus, the program has been completed successfully.
Ex.No:03 Distribution of Skewness and Kurtosis
Date:

Aim:

To Calculate Measures of Distribution-Skewness and Kurtosis

Procedure:
Step 1: Start homeclick All programs  IBM SPSS Statistics
20
Step 2: Go to variable view and defines the field you want
Step 3: Go to data view and give input for the fields you want to
define
Step 4: Go to AnalyzeDescriptive
StatisticsFrequenciesStatisticsSkewness,
KurtosisContinueSelect the Variables and click Ok
Step5: The output has been displayed in output screen.
Input:

Output:
RESULT:
Thus, the program has been completed successfully.
Ex.No:04 Subdivided Bar Graph (Cluster Analysis)
Date:

Aim:
To represent the data graphically, generating subdivided bar Graph
diagram by cluster analysis.

Procedure:
Step 1: Go to start menu  All programIBM SPSS statistics and select
IBM SPSS statistics 20
Step 2: The software opens out of the two viewsdata and variable,
choose variable view.
Step 3: In the variable view, enter the field you will have in your
frequency table and define their type and size.
Step 4: After entering the field in the, variable view, shift to data view
and you can see your fields are ready to take inputs, so enter inputs
for the field.
Step 5: Go to graphslegacy dialog and choose bar. Bar dialog box
opens. Select clustered and click define or select stacked and click
define.
Step 6: Stack or clustered dialog box opens select one variable each for
category axis, define stack/cluster by, rows and columns and click OK.
Input:

Output:
RESULT:
Thus, the program has been completed successfully.
Ex.No:05 Calculation of correlation coefficient
Date:

Aim:
Calculation of Correlation Coefficient by
1: Karl’s Pearson’s Correlation
2: Spearman’s Rank Correlation Coefficient

Procedure :
Step 1Go to variable view and define the fields you want.
Step 2Go to data view and give inputs for the fields created by you.
Step 3Go to AnalyzeCorrelateBivariateSelectPearson and Spearman.
Step 4Click options and tick Means and standard deviations and click
continue. Then select the variables and click ok.
Input:

Output:
RESULT:
Thus, the program has been completed successfully.
Ex.No:06 Calculate Methods of Dispersion
Date:

Aim:
To Calculate Methods of Dispersion-Standard Deviation, variance,
range, maximum, minimum

Procedure:
Step 1: Start homeclick All programs  IBM SPSS Statistics 20 Step
2: Go to variable view and defines the field you want
Step 3: Go to data view and give input for the fields you want to define
Step 4: Go to AnalyzeDescriptive
StatisticsFrequenciesStatisticsMark Quartiles, Standard deviation,
variance, range, maximum, minimum ContinueSelect the Variables
and click Ok
Step5: The output has been displayed in output screen.
Input:

Output:
RESULT:
Thus, the program has been completed successfully.
Ex.No:07 Non Parametric Test
Date:

Aim:
To implement Non Parametric Test by doing Wilcoxon type test.
Procedure:
Step 1: To Start Ibm Statistic Go To StartIbm Statistic.
Step 2: Go To Variable View And Enter The Field
Details. Step 3: Go To Data View And Enter The Data.
Step 4: To Perform Non Parametric Test Goto AnalyzeNon
Parametric TestLegacy Dialog2 Related SampleSelect Hmg
And Age And Send Them To Test Pairs.
Step 5: Under Test Type Box Select Wilcoxon Check Box.
Step 6: Click On Options And Select Descriptives And Quartiles
Step 7: Click Continue OK.
Input:

Output:
RESULT:
Thus, the program has been completed successfully.
 Ex.No:08 Test of significance for single and two samples
Date:

Aim:
*Test of significance for single and two samples (1-test for mean and
standard deviation; 2-test for proposition)

Procedure:
Step1: In variable view enter data as machine. Enter in values and select
1=machine a, 2=machine b. Enter field name as quality and count.
Step 2: In data view enter the required values.
TEST FOR MEAN AND STANDARD DEVIATION:
Step 3: Analyze->compare means->independent variable->sample t-test
Step 4: Move machine to grouping variables, quality and count to test
variable.
Step 5: For machine enter into define groups and select group1=1,
group2=2.
TO CREATE WEIGHT BY MACHINE.
Step 6:Data->weight cases ->enable weight cases by, move count -
>frequency variable.
TEST FOR PROPOSITION:
Step 7: Analyze->descriptive statistics->crosstabs.
Step 8: Move machine to rows and quality to columns.
Step 9: Enter into statistics and enable chi square then select continue, press
ok.
Input:

Output:
TEST FOR MEAN AND STANDARED DEVIATION:
Output:

TEST FOR PROPOSITION:

RESULT:
Thus, the program has been completed successfully.
Ex.No:09 One way ANOVA
Date:

Aim:
Test of homogeneity of means for more than two samples.

Procedure:
Step 1: Type normal,diabeties,herb1,herb2 in variable view
Step 2: Then select the data view and type the values.
Step 3: Analyzecompare meansone way ANOVA.
Step 4: Move normal  factor.
Step 5: Move diabeties,herb1,herb2dependent list.
Step 6: Select option and enable descriptive.
Step 7: Then select continue and press OK.
Input:

One way ANOVA

Output:

One way ANOVA

RESULT:
Thus, the program has been completed successfully.
Ex.No:10 Two way ANOVA
Date:

Aim:
Test of homogeneity of means for more than two samples.

Procedure:

Step 1: Select the variable view type the name as family type, schooling,
achievement.
Step 2: Select the data view and type the values.
Step 3: n variable view,family type field assign a value 1=one parent
& 2=two parent .
Step 4: schooling1=home,2=school and select OK.
Step 5: Go to Analyzegeneral linear modelunivariant.
Step 6: Move achievementdependent variable. and family type &
schoolingfixed factor.
Step 7: Select option and move all fields Display means for.
Step 8: Enable descriptive statistics and homogeneity test.
Step 9: Press continue and press OK.
Input:

Output:
RESULT:
Thus, the program has been completed successfully.