========================================================================

*** Basic Information ***

========================================================================
[Create date] 2017/07/18
------------------------------------------------------------------------
[Program Name] Cloud Fax
------------------------------------------------------------------------
[Version] 1.0.3
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D2411464C_forEDC
[File Information]
File Name D2411464C_forEDC.zip
File Type Module for Service
Size 3.26 MB ( 3416711 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D2411464C_forEDC_readme.txt[2017/07/26 9:54:19]
 ========================================================================
[Modifications made:]
Symptom corrected:
1. Scanner auto reset executes while swiping the reception result or
the transmission result screen, and the screen closes even if in operation.
2. If the Energy Saving Recovery for Business Application is set to On
(Energy Saving), the operation panel is turned on, and the device's engine
is off, the device might not automatically receive cloud mail.
3. Automatic reception of CloudFax might not be carried out when the device is
in energy saving mode.

Other changes:
- New Model Supported

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.0.2
Symptom corrected:
- When select the group address that include over than eleven
destinations and send to it, Cloud Fax Connector seems to be send
a data to all addresses of group, but actually a data is sent to
only ten destinations.
- Even if registering over than eleven destinations to "Sender" in the
settings of "Cloud Fax Connector Features", only ten destinations are
displayed in "Sender".

----------------------------------------
Version 1.0.1
Other changes:
- Changes the icon name to "Cloud Fax Connector".

----------------------------------------
Version 1.0.0
Initial release

D2411464C_forEDC_readme.txt[2017/07/26 9:54:19]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/11
------------------------------------------------------------------------
[Program Name] GSNX V2 SmartOperationPanel (for use with Remote Install Manager)
------------------------------------------------------------------------
[Version] 2.4.5.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D4885200E_forEDC
[File Information]
File Name D4885200E_forEDC.zip
File Type Module for Service
Size 11.21 MB ( 11751587 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D4885200E_forEDC_readme.txt[2017/09/13 7:39:35]
 ========================================================================
[Modifications made:]
Others:
- Fax documents received after the year 2000 can be retrieved from
this version.

Fixed:
- It fails to re-retrieve some fax documents when six or more fax
documents are stored, and the left documents are not retrieved
until the next re-retrieve.
- An unexpected error caused by the authentication status mismatch
prevents the project from starting. This occurs by pressing the
project button immediately after logging-in.
- Scanning fails as the result of failing to obtain the scanned
image, which occurs if the system is busy during the scanning
(example: printing is processed in the background).
- Project screen is grayed out and cannot be operated.
- The application is terminated if the search button for the folder
selection is pressed twice.
- It fails to start the application when the device without HDD is
recovered from the sleep mode.
- With the server version, the state of the screen stays as
processing wait until transferring a scan / fax image to the
server is completed.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 2.4.4.0
Fixed:
- Usage of Memory for scanner will not be recovered immediately even if
scan job delivery by GSNX has been finished
- When GSNX delivers a scan job, the "userName" value in the metadata is empty

----------------------------------------
Version 2.4.3.0
Supported
- RICOH Pro 8200EX/Pro 8200S/ Pro 8210S/Pro 8220S have been added
as supported device models.
- MP C307 / MP C407 have been added as supported device models.
- Support for Windows Server 2016 Datacenter / Standard.
- Support for Microsoft SharePoint Server 2016. (Server Edition Only)

Others
- In the case of GSNX SOP Optimized Mode (Hybrid Mode), the design
of the "Back" button icon displayed on the device panel has been improved.
- The Global Scan service starts automatically only if the service is
terminated abnormally. (Server Edition Only)

Fixed
- An error dialog is displayed when displaying the preview screen on
the operation panel in the case of using a 10.1 inch profile converted

D4885200E_forEDC_readme.txt[2017/09/13 7:39:35]
 from WVGA.
- "OCR Scanned PDF" is not displayed on a tab menu in the case of
using a 10.1 inch profile converted from WVGA.
- The GSNX server's CPU load goes up to 99% in the case of receiving
a specific request.
- The wording displayed on the operation panel is cut off in the
middle in the case of using GSNX Optimized mode (Hybrid mode).

----------------------------------------
Version 2.4.2.0
Supported:
- RICOH MP 2555/3055/3555/4055/5055/6055 is added to supported
device models.

Others:
- Added the "Reverse Orientation" feature for 10.1 inch profiles.
- 10.1 inch screen profiles are now emulated like the Smart
Operation Panel if you want to edit or create a profile.
- Additional debug information has been added to the DPL log.
(Server Edition Only)
- Debug log information for the Send To Folder plug-in has been
improved.
- The design of the SOP optimized mode (Hybrid) UI displayed on the
operation panel has been improved.
- Mixed Original Size is now supported on Aficio SP 5200S, 5210SF,
5210SR / MP 402SPF / MP 501SPF / MP 601SPF.
- Reverse Orientation is now supported on MP CW2201 Series / MP
CW1201 Series / MP C6503 SP / MP C8003 SP / Pro C5200S / Pro
C5210S.
- The following functions regarding avoided job data on MFP devices
has been added to the AdminTool.
Display the avoided job count.
Download or delete avoided job data contained on the MFP HDD.
- If the GlobalScan service is stopped due to an "Out Of Memory"
error, a heap dump file will be generated automatically.(Server
Edition Only)

Fixed:
- Security vulnerabilities (CVE-2016-3092) have been fixed.
- Failed to convert profiles created in previous versions to 10.1
inch.
- The AdminTool is not usable when profile data set for a 3rd party
plug-in is restored to a GSNX server that does not have the 3rd
party plug-in module installed.
- The 32-bit version of the GlobalScan service cannot be stopped on
64-bit version operating systems. (Server Edition Only)
- GSNX fails to create a job if a language not supported by GSNX is
selected on the MFP.
- The "GlobalScan NX V2 Additional Enterprise Server" license is not
available in GXNX v2.4.0 and v2.4.1. (Server Edition Only)
- Failure to save a setting in the Monitor Folder setting tool on
Windows 10. (Server Edition Only)
- The same inbound FAX document will be delivered twice if the user

D4885200E_forEDC_readme.txt[2017/09/13 7:39:35]
 tool is selected when GSNX is in the process of delivering the
inbound FAX document.
- Inbound fax document delivery is delayed if the device receives
the inbound fax while a user is editing the device's address book.
- GSNX v2 Smart Operation Panel application fails to install to the
Smart Operation Panel.
- In the "Email Search" function on 10.1 inch profiles, "Display
Name" and "Address Format" are not displayed correctly.
- Jobs stored in the job shelter are not removed from the device
when the GSNX Embedded application is updated. (Serverless Edition
Only)
- The operation panel screen may freeze
if "AutoLogoutAfterScanning"(ConfigUtil) is applied to the MFP.
- In the case of SOP Optimized mode (Hybrid), the device cannot
enter sleep mode if the system auto reset time is set as shorter
than the time set for sleep mode.
- Improved a vulnerability issue. (Apache Commons Collections Java
library insecurely deserializes data.)
- Fixed a vulnerability for clickjacking.

----------------------------------------
Version 2.4.1.0
Supported:
- RICOH MP 402SPF is added to supported device model.
- RICOH MP 6503/7503/9003 is added to supported device model.
- RICOH MP C6503/C8003 is added to supported device model.
- Pro C5200S/C5210S is added to supported device model.
- RICOH MP 501SPF / MP 601SPF
- RICOH MP CW2201SP
- RICOH MP C305
- The GSNX AdminTool now supports Windows 10 Pro / Enterprise /
Education (32-bit/64-bit).

Others:
- The Profile Copy function has been added.
- A function for converting a profile from WVGA to 10.1 inch has
been added.
- The screen size (WVGA / 4.3 inch / 10.1 inch) that a profile is
dedicated to is added in parenthesis after the profile number.
- The Activation Tool now supports the displaying of multiple
languages.
- The GlobalScan service will be restarted automatically if the
service is not in "running" status or the web service cannot
respond. (Server Edition only.)
- 8 1/2 x 13 2/5 Landscape is available as a scan size in 10.1 inch
profiles with GSNX SOP Optimized Mode (Hybrid Mode).
- In the case of GSNX SOP Optimized Mode (Hybrid Mode), the name of
the button for returning to the profile's top screen has been
changed from "Top" to "Back".
- When pressing the "Back" button on the project screen on GSNX
SOP Optimized Mode (Hybrid Mode), the group menu where the
selected project is located will be displayed.
- In the case of GSNX SOP Optimized Mode (Hybrid Mode), the design

D4885200E_forEDC_readme.txt[2017/09/13 7:39:35]
 of the group menu icon has been improved.
- The back key provided by SOP is available in the case of GSNX SOP
Optimized Mode (Hybrid Mode).
- Improved the processing speed when PDF Converter(Enhanced) creates
an unsearchable PDF file.
- Improve security.

Fixed:
- Send To Folder delivery is delayed when performing Kerberos
authentication.
- The destination path for the Send To Folder or Send To WebDAV
services seem to be unselected on the operation panel when the
startpoint path had been selected with some operation.
- The destination path for the Send To Folder or Send To WebDAV
services seem to be unselected on operation panel although a
destination path is preset via the GSNX AdminTool. (Serverless
Edition only.)
- GSNX fails to create a searchable PDF file via PDF Converter when
the delivery flow contains Send To Email with the Email Divide
function. (Server Edition only.)
- Displays the hidden scan paper sizes on uWVGA operation panels.
- Fails to deliver stored inbound Fax documents when the GlobalScan
SDK application starts running. (Serverless Edition only.)
- SSL setting is disable when performing an overwrite installation
of GSNX Admin Tool with SSL settings.
- The profile icon is not displayed in the case of GSNX SOP
Optimized Mode (Hybrid Mode).
- GSNX may rotate scanned documents to an unexpected orientation
when Color or Gray Scale is selected for the Scan Type setting.
(Server Edition only.)
- GSNX may rotate scanned documents to an unexpected orientation
when Color or Gray scale is selected for the Scan Type setting and
PDF Converter is set. (Serverless Edition only.)
- An error message is displayed on device operation panel when using
the Secondary server and the Error Notification function is
enabled. (Server Edition only.)
- When user logs in to a device, a "You do not have the privileges
to use this function" message is displayed for a moment before
GSNX is displayed.
- The GSNX application is not useable when the "Continue" button is
selected right before the timer count for waiting additions become
zero.
- It may not be possible to close dialog boxes when using the Send
To RightFax service plug-in and Required Manual Entry Confirmation
is enabled. (Server Edition only.)
- An illegal screen may be displayed when displaying the destination
list for the Send To RightFax service plug-in and Required Manual
Entry Confirmation is enabled. (Server Edition only.)
- When using the "Image Correction" plug-in, delivery will be
successful but some page data may be deleted and not sent.

----------------------------------------
Version 2.4.0.0

D4885200E_forEDC_readme.txt[2017/09/13 7:39:35]
 Supported:
- RICOH MP C306Z/C406Z
- RICOH MP C3004/C3504/C4504/C5504/C6004/C2004/C2094SPJ/C2504/C2594SPJ

Fixed:
- The remarks in the system log are not added to the error
notification emails.
- When importing project data from an older version, the tab order
is changed in the filter menu.
- When updating the GlobalScan NX server, the isapi log size becomes
large.
- When configuring Passwordless authentication(Active Directory) and
Kerberos authentication for the Send To Home Folder function, NTLM
authentication is used.
- Simplified Chinese text cannot be recognized in searchable PDFs
created by the PDF Converter(Enhanced) filter. (Server Edition
only.)
- The PDF Converter(Enhanced) filter fails to create searchable PDFs
that include some tables. (Server Edition only.)
- The PDF Converter(Enhanced) filter fails to create searchable PDFs
that include over 150 pages. (Server Edition only.)
- The PDF Converter(Enhanced) filter creates PDF files that are not
compliant with PDF/A-1a or PDF/A-1b when either is selected.
- When a double-sided document is scanned, the back side is rotated
to unexpected orientations. This fix is dependent on specific Java
VM versions. Please be sure to update Java VM accordingly.

Others:
- The UI for the Smart Operation Panel is now supported.
- The manual displayed via the GlobalScan NX AdminTool has been
changed to PDF format.
- The activation system for the GlobalScan NX Server application has
been changed.
- The Logjam vulnerability has been fixed.

D4885200E_forEDC_readme.txt[2017/09/13 7:39:35]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/05/09
------------------------------------------------------------------------
[Program Name] FlexRelease CX Embedded (Remote Install Manager)
------------------------------------------------------------------------
[Version] 1.5.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D7425000H_forEDC
[File Information]
File Name D7425000H_forEDC.zip
File Type Module for Service
Size 2.05 MB ( 2149530 byte )
------------------------------------------------------------------------
[Production reflection] 2017/05
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D7425000H_forEDC_readme.txt[2017/05/15 14:33:26]
 [Modifications made:]
Support:
Support for the following 15S models (Compatibility mode) have been added:
- Met-C2.1 a,b,c,d,e,y,z

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.5.0
Support:
Support for the following 16S models (Compatibility mode) have been added:
- GR-C3 a,b
- Cor-C1.5 c,d,e,f,g,h

----------------------------------------
Version 1.5.0
Support:
Support for the following 15A models (Compatibility mode) have been added:
- MET-P2 c,e

Support for the following 16S models (Compatibility mode) have been added:
- CH-C2 (Office) a,b

----------------------------------------
Version 1.5.0
Support:
Support for the following 16S models (Compatibility mode) have been added:
- Gim-MF1.5dM

----------------------------------------
Version 1.5.0
Changed:
Support for Port Monitor installation via PDP-NX has been added.
PDP-NX v1.1.9 or later is required.

----------------------------------------
Version 1.3.0.0
Support for the following 16S models (Compatibility mode) have been added:
- MT-C6 a/c/e

----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S models (Compatibility mode) have been added:
- MET-C2 y/z
- Brz-MF1 a/b
- LE-C1 b

D7425000H_forEDC_readme.txt[2017/05/15 14:33:26]
 ----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S models (Compatibility mode) have been added:
- MET-C2 a/b/c/d/e

----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S has been added:
- GR-C2 a/b

----------------------------------------
Version 1.3.0.0
Support:
Support for the following Smart Operation Panel models
(Compatibility mode) have been added:
- MET-C1a, b, c, d, e, y, z
- Z-C2b
- Cor-C1c, d, e, f, g, h

---
Support:
Support for the following 14S Standard Operation Panel model has been added:
- Cor-C1 c,d,e

---
Support:
1. Support for the following 14S models have been added:
- Cor-C1 f,g,h

Changed:
1. In the case of 12A or later models (except for TI-P1), FlexRelease CX
Embedded can be informed of printer errors from the printer application.
If the printer application encounters an error when a user attempts
to print, printing will not be started and the print job will not
be deleted from the FlexRelease CX Server.

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.2.1.0
Fixed:
The following bugs have been fixed:
1. If the "Apply" button in the FlexRelease CX Administration Tool's
Device Activation screen is selected multiple times, the "Update
has completed successfully" screen cannot be displayed.
2. If the "Reset" button in the FlexRelease CX Administration Tool's
Device Activation screen is selected multiple times, the initial

D7425000H_forEDC_readme.txt[2017/05/15 14:33:26]
 settings screen cannot be displayed correctly.

Changed:
1. Windows 8.1 for port monitor/IE 11 for web browser are now supported.
2. "Check print" and "Delete after printing" functions have been added.
3. User code authentication is now supported.
4. A connection test is performed if the "Apply" button in the
FlexRelease CX Administration Tool's Network Settings is selected.
5. Device activation is performed in FlexRelease CX Administration
Tool's Device Activation.
6. "Default Job Selection" can be specified.

Support:
Support for the following 12A models has been added:
- MET-C1yz
- Z-C2

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.1.5
Fixed:
1. A printing error may occur due to a failure to control the
device's Auto Logout function.

Support:
1. Support for the following 12A model has been added:
- OR-C2

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.1.4.0
Fixed:
The following bugs have been fixed:
1. The device may not switch to energy saver mode correctly.
2. Null pointer exception may occur during card login on a device
with CAP v2 installed.
3. If log downloading is canceled, the User Tools/Counter button may
not work.

Support:
Support for the following 12A models has been added:
- CH-C1
- MET-C1

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.1.3.0

D7425000H_forEDC_readme.txt[2017/05/15 14:33:26]
 Fixed:
Under some rare conditions, an error dialog would appear after
opening and then canceling the print confirmation screen from the
Condition Print Settings screen. In that situation,
the Close button on that error dialog does not work.

Changed:
1. Support for printing via the local printer driver has been added
via the Port Monitor module.
2. Support for IC Card Authentication via CAP V2 has been added.
3. Support for registering and managing User Information via a
CSV file has been added.

Support:
Support for the following models has been added:
MT-C5
V-C3
SH-MF1

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.0.2.0
Other changes:
1. The German, French, Spanish, Dutch, and Italian end-user UI and
notification emails are now available.

----------------------------------------
Version 1.0.0.0
Initial Release

D7425000H_forEDC_readme.txt[2017/05/15 14:33:26]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/05/09
------------------------------------------------------------------------
[Program Name] FlexRelease CX Embedded for EUDC(Remote Install Manager)
------------------------------------------------------------------------
[Version] 1.5.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) EUR(all)
[Firmware No.] D7425701B_forEDC
[File Information]
File Name D7425701B_forEDC.zip
File Type Module for Service
Size 2.05 MB ( 2149451 byte )
------------------------------------------------------------------------
[Production reflection] 2017/05
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D7425701B_forEDC_readme.txt[2017/05/15 14:33:26]
 [Modifications made:]
Support:
Support for the following 15S models (Compatibility mode) have been added:
- Met-C2.1 a,b,c,d,e,y,z

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.5.0
Support:
Support for the following 16S models (Compatibility mode) have been added:
- GR-C3 a,b
- Cor-C1.5 c,d,e,f,g,h

----------------------------------------
Version 1.5.0
Support:
Support for the following 15A models (Compatibility mode) have been added:
- MET-P2 c,e

Support for the following 16S models (Compatibility mode) have been added:
- CH-C2 (Office) a,b

----------------------------------------
Version 1.5.0
Support:
Support for the following 16S models (Compatibility mode) have been added:
- Gim-MF1.5dM

----------------------------------------
Version 1.5.0
Changed:
Support for Port Monitor installation via PDP-NX has been added.
PDP-NX v1.1.9 or later is required.

----------------------------------------
Version 1.3.0.0
Support for the following 16S models (Compatibility mode) have been added:
- MT-C6 a/c/e

----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S models (Compatibility mode) have been added:
- MET-C2 y/z
- Brz-MF1 a/b
- LE-C1 b

D7425701B_forEDC_readme.txt[2017/05/15 14:33:26]
 ----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S models (Compatibility mode) have been added:
- MET-C2 a/b/c/d/e

----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S model has been added:
- GR-C2 a/b

----------------------------------------
Version 1.3.0.0
Support:
Support for the following Smart Operation Panel models
(Compatibility mode) have been added:
- MET-C1a, b, c, d, e, y, z
- Z-C2b
- Cor-C1c, d, e, f, g, h

---
Support:
Support for the following 14S Standard Operation Panel model has been added:
- Cor-C1 c,d,e

---
Support:
1. Support for the following 14S models have been added:
- Cor-C1 f,g,h

Changed:
1. In the case of 12A or later models (except for TI-P1), FlexRelease CX
Embedded can be informed of printer errors from the printer application.
If the printer application encounters an error when a user attempts
to print, printing will not be started and the print job will not
be deleted from the FlexRelease CX Server.

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.2.1.0
Support:
1. Support for the following 12S model has been added:
- Z-C2

----------------------------------------
Version 1.2.1.0
Initial Release for RE.

D7425701B_forEDC_readme.txt[2017/05/15 14:33:26]
D7425701B_forEDC_readme.txt[2017/05/15 14:33:26]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/05/31
------------------------------------------------------------------------
[Program Name] FlexRelease CX Embedded SP31 (Remote Install Manager)
------------------------------------------------------------------------
[Version] 1.5.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D7425010D_forEDC
[File Information]
File Name D7425010D_forEDC.zip
File Type Module for Service
Size 2.05 MB ( 2151755 byte )
------------------------------------------------------------------------
[Production reflection] 2017/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D7425010D_forEDC_readme.txt[2017/06/05 13:51:37]
 [Modifications made:]
Support:
Support for the following 15S models (Compatibility mode) have been added:
- VE-P1 d

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.5.0
Changed:
Support for Port Monitor installation via PDP-NX has been added.
PDP-NX v1.1.9 or later is required.

----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S models have been added:
- MD-P3 d

----------------------------------------
Version 1.3.0.0
Support:
Support for the following model has been added:

- Gim-MF1d/MF1dM, Gim-P1dM

----------------------------------------
Version 1.3.0.0
Changed:
1. In the case of 12A or later models (except for TI-P1), FlexRelease CX
Embedded can be informed of printer errors from the printer application.
If the printer application encounters an error when a user attempts
to print, printing will not be started and the print job will not
be deleted from the FlexRelease CX Server.

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.2.1.0
Fixed:
The following bugs have been fixed:
1. If the "Apply" button in the FlexRelease CX Administration Tool's
Device Activation screen is selected multiple times, the "Update
has completed successfully" screen cannot be displayed.
2. If the "Reset" button in the FlexRelease CX Administration Tool's
Device Activation screen is selected multiple times, the initial
settings screen cannot be displayed correctly.
3. When a user logs in, the job list for the user who was previously
logged in may be displayed.

D7425010D_forEDC_readme.txt[2017/06/05 13:51:37]
 Changed:
1. Windows 8.1 for port monitor/IE 11 for web browser are now supported.
2. "Check print" and "Delete after printing" functions have been added.
3. User code authentication is now supported.
4. A connection test is performed if the "Apply" button in the
FlexRelease CX Administration Tool's Network Settings is selected.
5. Device activation is performed in FlexRelease CX Administration Tool's
Device Activation.
6. "Default Job Selection" can be specified.Update the Java VM to
the latest version before installing this software.

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.1.4.0
The following bugs have been fixed:
1. The device may not switch to energy saver mode correctly.
2. Null pointer exception may occur during card login on a device
with CAP v2 installed.
3. If log downloading is canceled, the User Tools/Counter button may not work.

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.1.3.0
Initial Release

Update the Java VM to the latest version before installing this software.

D7425010D_forEDC_readme.txt[2017/06/05 13:51:37]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/05/31
------------------------------------------------------------------------
[Program Name] FlexRelease CX Embedded SP31 for EUDC(Remote Install Manager)
------------------------------------------------------------------------
[Version] 1.5.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) EUR(all)
[Firmware No.] D7425711B_forEDC
[File Information]
File Name D7425711B_forEDC.zip
File Type Module for Service
Size 2.05 MB ( 2151680 byte )
------------------------------------------------------------------------
[Production reflection] 2017/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D7425711B_forEDC_readme.txt[2017/06/05 13:51:37]
 [Modifications made:]
Support:
Support for the following 15S models (Compatibility mode) have been added:
- VE-P1 d

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.5.0
Changed:
Support for Port Monitor installation via PDP-NX has been added.
PDP-NX v1.1.9 or later is required.

----------------------------------------
Version 1.3.0.0
Support:
Support for the following 15S models have been added:
- MD-P3 d

----------------------------------------
Version 1.3.0.0
Support:
Support for the following model has been added:

- Gim-MF1d/MF1dM, Gim-P1dM

----------------------------------------
Version 1.3.0.0
Changed:
1. In the case of 12A or later models (except for TI-P1), FlexRelease CX
Embedded can be informed of printer errors from the printer application.
If the printer application encounters an error when a user attempts
to print, printing will not be started and the print job will not
be deleted from the FlexRelease CX Server.

Update the Java VM to the latest version before installing this software.

----------------------------------------
Version 1.2.1.0
Initial Release for RE.

D7425711B_forEDC_readme.txt[2017/06/05 13:51:37]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/08/29
------------------------------------------------------------------------
[Program Name] RICOH Scan CX Embedded for EUDC (for use with Remote Install Manager)
------------------------------------------------------------------------
[Version] 1.2.2.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) EUR(all)
[Firmware No.] D7691731D_forEDC
[File Information]
File Name D7691731D_forEDC.zip
File Type Module for Service
Size 7.03 MB ( 7373749 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/09
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D7691731D_forEDC_readme.txt[2017/09/01 10:17:14]
 ========================================================================
[Modifications made:]
Fixed:
Fixed an issue that caused v1.2.1 to not install correctly.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.2.1.0
Fixed:
RICOH Scan CX may send a scanned document that is rotated to an
unexpected direction when the following conditions are met.
- Condition 1: Auto Color Select, Color or Gray Scale is selected
for the Scan Type setting as well as Storage Service or Email is
selected for Destination setting.
- Condition 2: Auto Color Select, Color or Gray Scale is selected
for the Scan Type setting as well as SMB or FTP is selected for
Destination setting and PDF is also selected for File Format.

----------------------------------------
Version 1.2.0.0
Supported:
- Metis-C2.1 a,b,c,d,e,y,z

----------------------------------------
Version 1.2.0.0
Supported:
- GR-C3 a,b,c,d,e,f,g,h

----------------------------------------
Version 1.2.0.0
Supported:
- CH-C2(Office) a,b

----------------------------------------
Version 1.2.0.0
Supported:
- Gim-MF1.5dM

----------------------------------------
Version 1.2.0.0
Supported:
- MT-C6 a, c, e

----------------------------------------
Version 1.2.0.0

D7691731D_forEDC_readme.txt[2017/09/01 10:17:14]
 Supported:
- MET-C2 y,z
- Brz-MF1 a,b
- LE-C1 b

----------------------------------------
Version 1.2.0.0
Support for the following 15S model has been added:
- MET-C2 a,b,c,d,e

----------------------------------------
Support for the following 15S model has been added:
- GR-C2 a,b

----------------------------------------
Support for the following Smart Operation Panel models
(Compatibility mode) have been added:
- MET-C1a, b, c, d, e, y, z
- Z-C2b
- Cor-C1c, d, e, f, g, h

Support for the following model has been added:

- Gim-MF1d,MF1dM, Gim-P1dM

---
Supported:
Support for the following 14S Standard Operation Panel model has been added:
- Cor-C1 c,d,e

---
Supported:
1. Support for the following models have been added:
- Cor-C1 f,g,h

Other:
- If a password inputted on the authentication screen includes a
blank value, the login button cannot be selected.
- The auto-logout dialog remains after a device is resumed from
energy saving mode.
- If a "start.ricoh" login user and scan user are the same after
CAP V2, ELP-NX V2 is uninstalled, the mask setting for the job log
needs to be set as "OFF".

Fixed:
- Despite the screen indicating that logging out was successful, the
user cannot logout.
- If the authentication mode is changed, users cannot log in to RICOH Scan CX.
- When dialog is cumulative, the screen freezes.

D7691731D_forEDC_readme.txt[2017/09/01 10:17:14]
 - Although the "Authentication has failed. The account may be invalid,
password expired, or lockout has been set. Please contact the
system administrator." dialog is displayed after selecting the
RICOH Scan CX icon, the RICOH Scan CX screen appears.
- When a job delivered via SMB delivery is redirected, the job
encounters an error because it fails to get the delivery folder
information.
- If HTTP is invalid in the MFP web service, an error will occur
when downloading logs in Embedded Manager.
- If the authentication mode is changed on the project select screen,
the change is not reflected after updating the profile.

----------------------------------------
Version 1.1.2.0
Supported:
1. Support for the following models have been added:
- AT-C2.5, AP-C2.5, OR-C1,V-C3, DI-C1.5, Z-C2, SH-MF1

----------------------------------------
Version 1.1.1.0
Initial Release for RE.

D7691731D_forEDC_readme.txt[2017/09/01 10:17:14]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/06/22
------------------------------------------------------------------------
[Program Name] GSNX SmartOperationPanel SSO Option(for use with Remote Install Manager)
------------------------------------------------------------------------
[Version] 1.1.0.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D4885300A_forEDC
[File Information]
File Name D4885300A_forEDC.zip
File Type Module for Service
Size 0.02 MB ( 17701 byte )
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

D4885300A_forEDC_readme.txt[2017/07/10 11:47:51]
 [Modifications made:]
Others:
- SSO (Single Sign On) between the GlobalScan SOP optimized
application and PaperCut v2 has been supported.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.0.0.0
Others:
- SSO (Single Sign On) between the GlobalScan SOP optimized
application and PCC v5 for SOP has been supported.

D4885300A_forEDC_readme.txt[2017/07/10 11:47:51]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/01
------------------------------------------------------------------------
[Program Name] ID Card Scan and Copy
------------------------------------------------------------------------
[Version] 1.2.7
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5500G_forEDC
[File Information]
File Name D3CM5500G_forEDC.zip
File Type Module for Service
Size 1.92 MB ( 2008086 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5500G_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Change:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.2.5
Symptom corrected:
- When the mail server is set to Outlook for Office365 and "SSL for
encrypted communication" is set to "On", the sending test fails.

Other changes:
- When a user logs in to the device and scans to folder using the
"ID Card Scan and Copy" application, the user authentication dialog
is displayed.

----------------------------------------
Version 1.2.3
Symptom corrected:
- When configuring the settings of ID Card Scan and Copy > SMTP Settings >
Emailing Authentication to "Off", email might not be able to be sent.

----------------------------------------
Version 1.2.2
New model supported.

Symptom corrected:
A sent file becomes corrupt when the file format is set to PDF and
the display language is set to one of the following 18 languages:
- German
- French
- Italian
- Dutch
- Spanish
- Russian
- Brazilian Portuguese
- Swedish
- Danish
- Portuguese
- Norwegian
- Czech
- Hungarian
- Turkish
- Polish
- Finnish
- Catalan
- Greek

D3CM5500G_forEDC_readme.txt[2017/09/11 9:46:52]
 ----------------------------------------
Version 1.2.0
Additional model information:
Support for the Model Lef-C1b.

Symptom corrected:
The destination folder setting cannot be configured if:
- The network environment is using NTLMv1.
- "Select items not from list." is chosen on the "Select destination"
screen shown during startup.

----------------------------------------
Version 1.1.1
Other changes:
The application name has been changed from "ID Card Scan & Copy"
to "ID Card Scan and Copy".

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5500G_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/06/29
------------------------------------------------------------------------
[Program Name] Scan to Cloud Services
------------------------------------------------------------------------
[Version] 1.03
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5511C_forEDC
[File Information]
File Name D3CM5511C_forEDC.zip
File Type Module for Service
Size 5.43 MB ( 5697041 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5511C_forEDC_readme.txt[2017/07/10 11:47:42]
 ========================================================================
[Modifications made:]
Other changes:
Application usage data can be obtained via @Remote.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.02
Symptom corrected:
1. When logging in with an account that is not the global administrator
for Office 365, login fails and the application cannot be used.
2. When logging in with an account other than "onmicrosoft.com", a
connection failed error message is displayed, but the user does
not know that the account cannot be used.
3. When logging in with an account other than "onmicrosoft.com", the
application might be forcibly terminated.
4. The following wording has been changed:
Before: "Remember User name and Password"
After: "Stay logged in"

----------------------------------------
Version 1.01
Symptom Corrected:
Minor bug correction.

----------------------------------------
Version 1.00
Other changes:
- 1st mass production

D3CM5511C_forEDC_readme.txt[2017/07/10 11:47:42]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/01
------------------------------------------------------------------------
[Program Name] Book Copy Helper
------------------------------------------------------------------------
[Version] 1.2.3
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5502E_forEDC
[File Information]
File Name D3CM5502E_forEDC.zip
File Type Module for Service
Size 6.15 MB ( 6445436 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5502E_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Change:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.2.2
Symptom corrected:
- When an application is used on the Model CH-C2 with a cover feeder
or inserter option, the application might not start up unexpectedly.

----------------------------------------
Version 1.2.1
Symptom Corrected:
The message "Invalid accesses have been received." is displayed in
the banner of the Smart Operation Panel when all of the following
conditions are met:
- The Book Copy Helper application is running in the background.
- The engine has not recovered after the Smart Operation Panel
starts up-for example, when the home screen is set as a priority application.
- The "Energy Saving Recovery for Business Application" setting is
set to "On (Energy Saving)".

----------------------------------------
Version 1.2.0
Other Changes:
The application name has been changed from "Easy Book Copy" to "Book Copy Helper".

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.
- The UI in the startup dialog has been modified.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5502E_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/01
------------------------------------------------------------------------
[Program Name] Scan to SharePoint
------------------------------------------------------------------------
[Version] 1.1.2
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5503C_forEDC
[File Information]
File Name D3CM5503C_forEDC.zip
File Type Module for Service
Size 1.71 MB ( 1795702 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5503C_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Change:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.1.1
Other Changes:
The application name has been changed from "Scan To SharePoint" to
"Scan to Server for SharePoint".

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5503C_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/01
------------------------------------------------------------------------
[Program Name] Easy Size Matching Copy
------------------------------------------------------------------------
[Version] 1.2.3
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5504E_forEDC
[File Information]
File Name D3CM5504E_forEDC.zip
File Type Module for Service
Size 6.20 MB ( 6500303 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5504E_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Change:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.2.2
Symptom corrected:
- When an application is used on the Model CH-C2 with a cover feeder
or inserter option, the application might close unexpectedly.

----------------------------------------
Version 1.2.1
Symptom Corrected:
The message "Invalid accesses have been received." is displayed in
the banner of the Smart Operation Panel when all of the following
conditions are met:
- The Easy Size Matching Copy application is running in the background.
- The engine has not recovered after the Smart Operation Panel
starts up-for example, when the home screen is set as a priority application.
- The "Energy Saving Recovery for Business Application" setting is
set to "On (Energy Saving)".

----------------------------------------
Version 1.2.0
Other changes:
Renamed the application "Easy Copy Size Match" to "Size Match Copy".

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.
- The UI in the startup dialog has been modified.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5504E_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/01
------------------------------------------------------------------------
[Program Name] Easy Size Matching Scan
------------------------------------------------------------------------
[Version] 1.2.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5505C_forEDC
[File Information]
File Name D3CM5505C_forEDC.zip
File Type Module for Service
Size 7.09 MB ( 7435643 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5505C_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Change:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.2.0
Other changes:
Renamed the application "Easy Scan Size Match" to "Size Match Scan".

----------------------------------------
Version 1.1.0
Other changes:
- Support for languages that are available on the device.
- The UI in the startup dialog has been modified.

----------------------------------------
Version 1.0.0
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5505C_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/04
------------------------------------------------------------------------
[Program Name] ID Card Copy
------------------------------------------------------------------------
[Version] 1.10.4
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5506A_forEDC
[File Information]
File Name D3CM5506A_forEDC.zip
File Type Module for Service
Size 4.66 MB ( 4889860 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5506A_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Changes:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.10
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5506A_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/04
------------------------------------------------------------------------
[Program Name] Scan to Folder Helper
------------------------------------------------------------------------
[Version] 1.10.2
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5507A_forEDC
[File Information]
File Name D3CM5507A_forEDC.zip
File Type Module for Service
Size 3.56 MB ( 3731296 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5507A_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Changes:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.10
Specification changes:
1. Added support for including user code authentication when conducting
destination information sheet printing on all applicable devices
except for the MP C306 and C406.
2. Support for Korean.
3. Support for Thai.
4. Added support for the hardware ten-key pad.
5. Removed a Menu key.

Symptom corrected:
- When the back button on the main screen of an application is pressed,
the application is not exited.

Other changes:
- Support for installing from the Application Site.

D3CM5507A_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/01
------------------------------------------------------------------------
[Program Name] Conference Concierge
------------------------------------------------------------------------
[Version] 1.1.1
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D3CM5508B_forEDC
[File Information]
File Name D3CM5508B_forEDC.zip
File Type Module for Service
Size 3.56 MB ( 3732710 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2017/08
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D3CM5508B_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
[Modifications made:]
Other Change:
- Job Counter is implemented.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 1.01
Symptom Corrected:
Minor bug correction.

----------------------------------------
Version 1.00
Other changes:
- 1st mass production
- Initial release via the Application Site.

D3CM5508B_forEDC_readme.txt[2017/09/11 9:46:52]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2017/09/11
------------------------------------------------------------------------
[Program Name] GSNX V2 (for use with Remote Install Manager)
------------------------------------------------------------------------
[Version] 2.4.5.0
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] D4885101O_forEDC
[File Information]
File Name D4885101O_forEDC.zip
File Type Module for Service
Size 7.08 MB ( 7426951 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection]
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 ========================================================================
[Modifications made:]
Fixed:
- With the server version, the state of the screen stays as
processing wait until transferring a scan / fax image to the
server is completed.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 2.4.3.0
Supported
- RICOH Pro 8200EX/Pro 8200S/ Pro 8210S/Pro 8220S have been added
as supported device models.
- MP C307 / MP C407 have been added as supported device models.
- Support for Windows Server 2016 Datacenter / Standard.
- Support for Microsoft SharePoint Server 2016. (Server Edition Only)

Others
- In the case of GSNX SOP Optimized Mode (Hybrid Mode), the design
of the "Back" button icon displayed on the device panel has been improved.
- The Global Scan service starts automatically only if the service is
terminated abnormally. (Server Edition Only)

Fixed
- An error dialog is displayed when displaying the preview screen on
the operation panel in the case of using a 10.1 inch profile converted
from WVGA.
- "OCR Scanned PDF" is not displayed on a tab menu in the case of
using a 10.1 inch profile converted from WVGA.
- The GSNX server's CPU load goes up to 99% in the case of receiving
a specific request.
- The wording displayed on the operation panel is cut off in the
middle in the case of using GSNX Optimized mode (Hybrid mode).

----------------------------------------
Version 2.4.2.0
Supported:
- RICOH MP 2555/3055/3555/4055/5055/6055 is added to supported
device models.

Others:
- Added the "Reverse Orientation" feature for 10.1 inch profiles.
- 10.1 inch screen profiles are now emulated like the Smart
Operation Panel if you want to edit or create a profile.
- Additional debug information has been added to the DPL log.
(Server Edition Only)
- Debug log information for the Send To Folder plug-in has been
improved.
- The design of the SOP optimized mode (Hybrid) UI displayed on the
operation panel has been improved.
- Mixed Original Size is now supported on Aficio SP 5200S, 5210SF,

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 5210SR / MP 402SPF / MP 501SPF / MP 601SPF.
- Reverse Orientation is now supported on MP CW2201 Series / MP
CW1201 Series / MP C6503 SP / MP C8003 SP / Pro C5200S / Pro
C5210S.
- The following functions regarding avoided job data on MFP devices
has been added to the AdminTool.
Display the avoided job count.
Download or delete avoided job data contained on the MFP HDD.
- If the GlobalScan service is stopped due to an "Out Of Memory"
error, a heap dump file will be generated automatically.(Server
Edition Only)

Fixed
- Security vulnerabilities (CVE-2016-3092) have been fixed.
- Failed to convert profiles created in previous versions to 10.1
inch.
- The AdminTool is not usable when profile data set for a 3rd party
plug-in is restored to a GSNX server that does not have the 3rd
party plug-in module installed.
- The 32-bit version of the GlobalScan service cannot be stopped on
64-bit version operating systems. (Server Edition Only)
- GSNX fails to create a job if a language not supported by GSNX is
selected on the MFP.
- The "GlobalScan NX V2 Additional Enterprise Server" license is not
available in GXNX v2.4.0 and v2.4.1. (Server Edition Only)
- Failure to save a setting in the Monitor Folder setting tool on
Windows 10. (Server Edition Only)
- The same inbound FAX document will be delivered twice if the user
tool is selected when GSNX is in the process of delivering the
inbound FAX document.
- Inbound fax document delivery is delayed if the device receives
the inbound fax while a user is editing the device's address book.
- GSNX v2 Smart Operation Panel application fails to install to the
Smart Operation Panel.
- In the "Email Search" function on 10.1 inch profiles, "Display
Name" and "Address Format" are not displayed correctly.
- Jobs stored in the job shelter are not removed from the device
when the GSNX Embedded application is updated. (Serverless Edition
Only)
- The operation panel screen may freeze
if "AutoLogoutAfterScanning"(ConfigUtil) is applied to the MFP.
- In the case of SOP Optimized mode (Hybrid), the device cannot
enter sleep mode if the system auto reset time is set as shorter
than the time set for sleep mode.
- Improved a vulnerability issue. (Apache Commons Collections Java
library insecurely deserializes data.)
- Fixed a vulnerability for clickjacking.

----------------------------------------
Version 2.4.1.0
Supported:
- RICOH MP 402SPF is added to supported device model.
- RICOH MP 6503/7503/9003 is added to supported device model.

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 - RICOH MP C6503/C8003 is added to supported device model.
- Pro C5200S/C5210S is added to supported device model.
- The GSNX AdminTool now supports Windows 10 Pro / Enterprise /
Education (32-bit/64-bit).

Others:
- The Profile Copy function has been added.
- A function for converting a profile from WVGA to 10.1 inch has
been added.
- The screen size (WVGA / 4.3 inch / 10.1 inch) that a profile is
dedicated to is added in parenthesis after the profile number.
- The Activation Tool now supports the displaying of multiple
languages.
- The GlobalScan service will be restarted automatically if the
service is not in "running" status or the web service cannot
respond. (Server Edition only.)
- 8 1/2 x 13 2/5 Landscape is available as a scan size in 10.1 inch
profiles with GSNX SOP Optimized Mode (Hybrid Mode).
- In the case of GSNX SOP Optimized Mode (Hybrid Mode), the name of
the button for returning to the profile's top screen has been
changed from "Top" to "Back".
- When pressing the "Back" button on the project screen on GSNX
SOP Optimized Mode (Hybrid Mode), the group menu where the
selected project is located will be displayed.
- In the case of GSNX SOP Optimized Mode (Hybrid Mode), the design
of the group menu icon has been improved.
- The back key provided by SOP is available in the case of GSNX SOP
Optimized Mode (Hybrid Mode).
- Improved the processing speed when PDF Converter(Enhanced) creates
an unsearchable PDF file.
- Improve security.

Fixed:
- Send To Folder delivery is delayed when performing Kerberos
authentication.
- The destination path for the Send To Folder or Send To WebDAV
services seem to be unselected on the operation panel when the
startpoint path had been selected with some operation.
- The destination path for the Send To Folder or Send To WebDAV
services seem to be unselected on operation panel although a
destination path is preset via the GSNX AdminTool. (Serverless
Edition only.)
- GSNX fails to create a searchable PDF file via PDF Converter when
the delivery flow contains Send To Email with the Email Divide
function. (Server Edition only.)
- Displays the hidden scan paper sizes on uWVGA operation panels.
- Fails to deliver stored inbound Fax documents when the GlobalScan
SDK application starts running. (Serverless Edition only.)
- SSL setting is disable when performing an overwrite installation
of GSNX Admin Tool with SSL settings.
- The profile icon is not displayed in the case of GSNX SOP
Optimized Mode (Hybrid Mode).
- GSNX may rotate scanned documents to an unexpected orientation
when Color or Gray Scale is selected for the Scan Type setting.

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 (Server Edition only.)
- GSNX may rotate scanned documents to an unexpected orientation
when Color or Gray scale is selected for the Scan Type setting and
PDF Converter is set. (Serverless Edition only.)
- An error message is displayed on device operation panel when using
the Secondary server and the Error Notification function is
enabled. (Server Edition only.)
- When user logs in to a device, a "You do not have the privileges
to use this function" message is displayed for a moment before
GSNX is displayed.
- The GSNX application is not useable when the "Continue" button is
selected right before the timer count for waiting additions become
zero.
- It may not be possible to close dialog boxes when using the Send
To RightFax service plug-in and Required Manual Entry Confirmation
is enabled. (Server Edition only.)
- An illegal screen may be displayed when displaying the destination
list for the Send To RightFax service plug-in and Required Manual
Entry Confirmation is enabled. (Server Edition only.)
- When using the "Image Correction" plug-in, delivery will be
successful but some page data may be deleted and not sent

----------------------------------------
Version 2.4.0.0
Supported:
- RICOH MP C306Z/C406Z
- RICOH MP C3004/C3504/C4504/C5504/C6004/C2004/C2094SPJ/C2504/C2594SPJ

Fixed:
- The remarks in the system log are not added to the error
notification emails.
- When importing project data from an older version, the tab order
is changed in the filter menu.
- When updating the GlobalScan NX server, the isapi log size becomes
large.
- When configuring Passwordless authentication(Active Directory) and
Kerberos authentication for the Send To Home Folder function, NTLM
authentication is used.
- Simplified Chinese text cannot be recognized in searchable PDFs
created by the PDF Converter(Enhanced) filter. (Server Edition
only.)
- The PDF Converter(Enhanced) filter fails to create searchable PDFs
that include some tables. (Server Edition only.)
- The PDF Converter(Enhanced) filter fails to create searchable PDFs
that include over 150 pages. (Server Edition only.)
- The PDF Converter(Enhanced) filter creates PDF files that are not
compliant with PDF/A-1a or PDF/A-1b when either is selected.
- When a double-sided document is scanned, the back side is rotated
to unexpected orientations. This fix is dependent on specific Java
VM versions. Please be sure to update Java VM accordingly.

Others:
- The manual displayed via the GlobalScan NX AdminTool has been

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 changed to PDF format.
- The activation system for the GlobalScan NX Server application has
been changed.
- The Logjam vulnerability has been fixed.

----------------------------------------
Version 2.3.3.0
Supported:
- Polish, Swedish, Finnish, Hungarian, and Japanese have been added
as supported OCR languages for Serverless OCR. (Serverless Edition
only.)
- Detailed error information has been added to error notification
emails.

Fixed:
- New entries cannot be registered via "Auto entry" for a
Replacement Table when the "Auto Entry" setting is enabled and the
table contains a large amount of information. (Server Edition
only.)
- When both "Secondary Delivery Server Settings" and "Load Balance
Server Settings" are enabled, administrators and users will
receive two of the same e-mails. (Server Edition only.)
- When enabling Report notifications, administrators will receive
unnecessary e-mails from devices. (Server Edition only.)
- If a project's "Scan Size" item is edited after being moved to
the "Hidden Items", the value selected for "Scan Size" will return
to "Auto Detect".
- Editing a project will fail if the "Divide Email" function on the
Service screen is moved to the "Hidden Items".
- The page order for scanned documents will be swapped if "Mixed
Batch" is selected on the "Scan Settings" tab.

----------------------------------------
Version 2.3.2.0
Supported:
- RICOH Pro C7100S/C7110S/C7100SX/C7110SX has been added to supported
device models.
- Linoprint C7100S/C7110S/C7100SX/C7110SX has been added to supported
device models.
- Korean has been added as a supported language.

Other:
- Rejects SSL v3.0 connection requests as a countermeasure for the
SSLv3 POODLE vulnerability.
- The MIME type for PDF files attached to emails delivered by "Send
to Email" has been changed to "applcation/pdf".
- Korean has been added as an OCR language for the OCR and PDF
Converter filters. (Server Edition only.)

Fixed:
- A temporary file is not removed after the OCR or PDF Converter
filter is processed. (Server Edition only.)

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 - GSNX delivers jobs to the wrong user when performing "Send to Me"
or "Send to Home Folder". (Server Edition only.)
- "Send to Folder" delivery fails if multiple jobs are processed at
the same time. (Server Edition only.)
- "Send to Folder" delivery stalls part way through processing.
(Server Edition only.)

----------------------------------------
Version 2.3.1.0
Fixed
- [RA Only] The Scan To Me or Send To Home Folder process fails when
using the Image Log Capture Plug-in.
(Server Edition only)
- The Image Correction filter process encounters an error instead of
skipping this process when the image file is not supported as an
input file for the Image Correction filter.
(Server Edition only)
- Delivery is delayed because of repeated unnecessary attempts to
access the domain controller by the Send to Folder Service.
- PDF is not displayed in the File Format settings and the PDF
Converter filter is not displayed after installation.
(Server Edition only)
- Compressed TIFF format is converted to an uncompressed MMR format
when using Auto Color Select in the Scan Type settings.
(Server Edition only)
- OCR language for Serverless OCR always uses the language specified
as default in Project screen of Admin Tool.
(Serverless Edition only )
- The Barcode Plug-in process loops when it processes a job after
redirection by the Flow Redirect filter.
(Server Edition only)
- The black belt enters the output data when using the Send to
Printer service.
(Server Edition only)
- GSNX fails to deliver when a file format for Searchable PDF is
input to the Image Converter filter.
(Serverless Edition only)
- File format types are not displayed in the Scan Setting Tab on the
Operation Panel.
(Serverless Edition only)
- Scan Type changes are not reflected when changing to "Black & White:
Text/Photo" from other types.
- Synchronization to MFPs will fail when performed on more than 10
devices at the same time.
- Memory leaking occurs when GSNX fails to write logs to system log files.
- Unable to log in to the GlobalScan NX AdminTool after a scheduled
backup is performed.
- A string with parenthesis ("(" and ")") is redundantly
registered to a Replacement Table when the Auto Entry and Using
Regex option is enabled.
- An unnecessary folder is made in the GSNX install folder when the
GSNX Windows service is restarted.
(Server Edition only)

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 - The "bin\DPL" folder is not deleted when GSNX is uninstalled.
(Server Edition only)
- User will fail to log in to a project with GSNX ACL settings if
the user belongs to a group that has special characters ("@" and
",") in its group name.
- The FTP plugin continuously waits for a reply from FTP Server.
- In environments where GSNX and CAP v2 are installed on an MFP,
Send to Email will fail.
(Serverless Edition only)
- JavaVM crashes when the starting day of summer time is input to
the metadata on a device with the summer time setting configured.
- A beep sound is not made when pressing down the # button on a
device when using "Mixed Batch" setting as the scan method.
- Update installation fails because of a failure to access the
RDPCOMIF.exe file.
(Server Edition only)
- The value of the page count is always set as 1 when creating a PDF
(OCR scanned, multi-page) or High Compression PDF (OCR scanned,
multi-page) file by using a device's OCR function.
(Serveless Edition only)
- Job logs are not displayed on the device panel when a user logs in
to the project via single sign on with CAP v2.
(Server Edition only)
- Unselected devices are imported when using the Export Device List
function.
- Unspecified profiles or projects are imported when using the
Import Device List function.
- It is not possible to select the "OK" button when the selected
profile does not have a one-touch scan project.
- When displaying the edit screen of a registered device from the
Device List, "Yes" is always selected in User Scanner function
regardless of the set value.

Other
- The PDF Stamper filter is supported.
(Server Edition only)
- The OCR and PDF Converter filters support Traditional Chinese as
an OCR language.
(Server Edition only)
- The timeout for the OCR process has been adjusted.
(Server Edition only)
- 3 additional OCR languages (Arabic/Vietnamese/Hebrew) have been
added in Enhanced PDF Converter plug-in by activating this option.
(Server Edition only)
- Traditional Chinese can be added as a supported language.
- A6 Landscape size can be used as a paper scan size.
- Custom Size can be used as a paper scan size.
- It is possible to select if preview is enabled by default.
- "Mixed Original Sizes" is supported by GSNX on MP 301 and MP C305.
- If using Secondary Delivery Server Settings, Administrators can be
informed if the server used for delivery has changed to the
secondary server from the primary server.
- Regarding the number of replacement table entries, the max entries
for 1 table has been changed to 700 entries from 500 entries, and

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 the max entries for the total number of entries for all tables has
been changed to 5000 entries from 2000 entries.
- The PDF Converter (Enhanced) filter supports a deskew function.
(Server Edition only)
- Traditional Chinese was displayed in the OCR language list as a
default in the PDF Converter (Enhanced) filter.
(Server Edition only)
- The compression format has been changed from CITT4 to JBIG2 when
PDF Converter(Enhanced) compresses a black and white type file.
(Server Edition only)
- Required free space on the drive has been changed to 2GB when
installing the GSNX application.
- Activation as Business server or Business server light is
supported when GSNX Server Edition is installed on a client OS
(Windows 7/8/8.1).
(Server Edition only)
- The IIS web service log has been rotated.
- The Send to Folder packet size has been made larger.
- [ConfigUtil Tool] Skip Service-Select view when there is only one
service used in the project after inputting metadata.
- [ConfigUtil Tool] The timeout value between the GSNX AdminTool and
GSNX server can be changed.
- [ConfigUtil Tool] Change the packet size when GSNX performs "Send
To Folder"

----------------------------------------
Version 2.2.1.0
1)Supported:
- RICOH MP C401/C401SR is added to supported device models.
- RICOH MP 2554/3054/3554/4054/5054/6054 is added to supported
device models.

2)Fixed:
1. When trying to direct jobs to another project by using the Flow
Redirector filter in a GlobalScanNX v2.2 environment, the
delivery of scanned documents with the Image Converter filter or
PDF convertor filter process may fail in the branched workflow.
2. When performing a synchronizing process with GlobalScanNX v2.2 on
multiple load balance servers with GlobalScanNX v2.2 installed,
synchronization to the second or later servers will fail.

Others:
None

----------------------------------------
Version 2.2.0.0
1) Supported
- RICOH MP 2553/3053/3353/DSm1525/DSm1530/DSm1533/N405/N406/N407
is added to supported device models.
- RICOH MP Pro 8100S/8110S/8120S is added to supported device
models.
- RICOH MP C2003/C2503/DSc1020/DSc1025 is added to supported device

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 models.
- Windows Server 2012 R2 Datacenter / Standard (64-bit)
- Support for Windows 8.1 Enterprise / Pro (32-bit/64-bit)
(Serverless Edition Only)

2) Fixed
- Memory leak occurs when the image correction filter is used in
32-bit environments (Server Edition only).
- The archiving process may fail when the archiver filter is used
for multiple jobs (Server Edition only).
- "Auto Color Select" configured to be undisplayed via the Admin
Tool is displayed on the device operation panel.
- The paper size may be mistaken as "81/2*11" size if GSNX
delivers a fax document which is A4 size via Send To Printer
(Server Edition only).
- Delivery fails if changing the delivery flow for a project with
Image Converter and PDF Converter (Server Edition only).
- The scanned job is missing pages or has another job's page if a
large document set is handled in a process flow with the Image
Correction filter (Server Edition only).
- JavaVM may crash when any of the following filters are used for a
long time in 64-bit environments (Server Edition Only):
- OCR filter, PDF Converter filter, or Image Converter filter.
- Needless files from old versions will be deleted during an update
installation.
- LDAP authentication fails if a special character such as "=",
"\", or """ is included in the DN.
- Downloading error jobs is unavailable when multiple error jobs are
selected on the Error Queue screen (Serverless Edition only).
- Checkbox number counter values in plug-in configurations cannot be
updated correctly.
- If failover is used, accessing the job log from a device will be
unavailable when the priority server cannot be reached (Server
Edition only).
- The login user cannot be logged out automatically when there are
no operations conducted after scanning.
- When scanning with a large manuscript set including color papers
via "Auto Color Select", color pages will be registered to
unintentional pages.
- If using the Barcode plugin, the PDF Converter filter may not
convert the scanned document to a PDF file (Server Edition only).

3) Other
- [ConfigUtil Tool] GSNX uses NTLM authentication forcibly when
performing Send To Folder.
- [ConfigUtil Tool] Possible to output detailed JCIFS log data on
Send To Folder.
- GSNX Serverless Edition supports the OCR scanned PDF file format
if using devices with an optional OCR function (Serverless Edition Only).
- Possible to specify multiple LDAP entries for displaying when
searching for an email address on Send To Email or Send To Exchange.
- [ConfigUtil Tool]Possible to display a prompting message for
restarting the GlobalScan service after applying the ConfigUtil

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 tool if restarting the GlobalScan service is required.
- [ConfigUtil Tool]Possible to change the protocol used for Kerberos
authentication from UDP to TCP only.
- [ConfigUtil Tool]Possible to retrieve the backed up job folders
via the Batch Download Logs function).
- GSNX supports creating a self-signed certificate in the "SSL
Setting Tool" if the built-in web server are used.
- Device administrator has been added and it is possible for multiple
device administrators to log in to the "Management Tool" simultaneously.
- Possible to search for registered devices on a devices list screen.
- Possible to save a custom metadata configured with no value in a
data fileld via the Admin Tool.
- [ConfigUtil Tool] Possible to make the login user log out
automatically when a certain of idle time is passed.
- The image compression type is changed from JBIG2 to CCITT4 if the
compression function is enabled in the Enhanced PDF Converter
(Server Edition only).
- [ConfigUtil Tool] Enables RTF, XLS, XLSX, and DOCX selection on
the "Scan Settings" tab via the device operation panel.
- [ConfigUtil Tool]The login process starts immediately after the
user enters a password for 4-line LCD models.
- "xlsx" and "docx" file formats has been added for when the OCR
plugin converts file formats.
- The following languages have been supported:
Danish, Portuguese, Norwegian, Russian

----------------------------------------
Version 2.1.3.0
Fixed:
- Failed to retrieve or deliver the home folder data under the
environment with "/" in OU name.
- Double delivery of documents in some environments with Section
Splitter filter or Barcode Separator filter configured in front
of Send to Folder service. (Server Edition Only)
- Processing for Image Correction takes a long time for the GSNX
64-bit. (Server Edition Only)
- When there is illegal data included in the folder delivery path,
an impertinent log will be recorded in the system log even though
the delivery is successful.
- The creatation of a searchable PDF with Chinese text fails when
tsize division is used for the Send to Email service. (Server
Edition Only)
- When using external authentication, if logout is conducted via the
device logout key, the application stops. (Server Edition Only)
- LDAP servers that only support SSL connections fail to connect via
SSL (StartTLS).
- Login fails when performing AD authentication for a user ID that
is registered to other groups with other domains to a project with
ACL configured.

Other:
- [ConfigUtil Tool] Screen transition to other applications is
available when the logout button in a project screen is pushed.
- [ConfigUtil Tool] When cooperating with Ringdale, the login

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 process starts automatically as long as card-authentication is
successful.
- [ConfigUtil Tool] The process of logging out from project will be
performed automatically after Scanning finishes.
- [ConfigUtil Tool] The maximum pages that can be created for a
multi-page PDF with PDF convertor filter will be 500 (Serverless
Edition only).
- [ConfigUtil Tool] The maximum pages that can be created for a
multi-page Tiff with Image Convertor filter will be 500
(Serverless Edition only).
- [ConfigUtil Tool]SSL connection can be used without a Site
certificate imported.
- [ConfigUtil Tool]Automatic synchronization and automatic
restarting of the GlobalScan service for Secondary or Load Balance
server is enabled (Server Edition Only).
- PDF Convertor (Enhanced) filter has been added (Server Edition
Only).
- Support for Windows Server 2008 R2 Datacenter.
- The following languages can be chosen as the OCR languages used
for OCR filter and PDF convertor filter: Danish, Portuguese,
Norwegian, Russian and Chinese(Server Edition Only).
- Chinese has been added to the supported languages.
- The time taken between when a request for device reboot is sent
and when the rebooting is started via an external application is
shortened.

Update the Java VM to the latest version before installing this update.

----------------------------------------
Version 2.1.2.0
Supported:
- GlobalScan NX now supports the following devices:
MP CW2200
MP 2001 / 2501 / DSm1020 / DSm1025

Fixed:
- NTLM authentication is not performed after a failed Kerberos
authentication when using search for folders if "Use the ticket
received on Kerberos authentication as the priority" is set in
the Kerberos option.
- GSNX does not complete the timeout process correctly when a
destination server does not respond during the Send to Folder
delivery process.
- Two-byte characters may display incorrectly in Report notifications
(Server Edition only).
- Kerberos options cannot be enabled when using GSNX Server Edition
trial version on Windows Server 2008R2 (Server Edition Only).
- If the time on the server has been changed immediately after
performing the Report notification, GSNX does not perform the
Report notification on the following day (Server Edition only).
- The GSNX embedded application does not work on the following devices:
Aficio MP 6001 / 7001 / 8001 / 9001
- Send to Home Folder and Send to Me fail on certain device models

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 if LDAPS is set in the LDAP authentication profile (Serverless Edition only).
- Search for email address fails on certain device models if LDAPS
is set in the Send to Email service (Serverless Edition only).
- Temporary files in the Windows temporary folder (typically,
"C:\Temp\RDPOCR\") on the HDD output by GlobalScan NX
OCR process are automatically deleted.

Other:
- Users can now change their username if they fail to log into a
project with SSO.
- AdminTool support for Windows 7 Ultimate / Enterprise /
Professional Edition (64-bit) (Serverless Edition only).
- Support for Windows Server 2012 Datacenter / Standard (64-bit).
- AdminTool support for Windows 8 Enterprise / Pro (32-bit / 64-bit)
(Serverless Edition only).
- ConfigUtil can allow GSNX to try and fit a non-standard PDF page
size onto a GSNX-supported standard size (Server Edition only)
(ConfigUtil).
- ConfigUtil can allow GSNX to display a "Scan Settings" shortcut
icon at the top of every GSNX screen on the operation panel
(ConfigUtil).
- Built-in Web Server Intermediate Certificate Chain Support.
- The maximum file size for Email Division has been raised from
10000KB to 100000KB.
- ConfigUtil can allow GSNX to perform auto-logout even when the
device is waiting for input or displaying a scan preview
(ConfigUtil).
- ConfigUtil can allow GSNX to start the login process immediately
after the user enters a password (presses the "OK" button on the
Software Keyboard) (ConfigUtil).

----------------------------------------
Version 2.1.1.0
Fixed:
- The Kerberos option is not enabled when using the 64-bit version
of the AdminTool (Serverless Edition Only).
- Creating a subfolder on a Domain-based DFS system causes Send to
Folder delivery to fail.
- Fax delivery sometimes fails for certain device models.
- Enabling an Image Correction plug-in function enables all Image
Correction functions for the GSNX 64-bit version (Server Edition
Only).

Others:
- GSNX now attempts a retry when fax data reception fails.
- A job queue and delivery service status report for administrators
has been added (Server Edition Only).

----------------------------------------
Version 2.1.0.0
Supported:
- GlobalScan NX V2.1.0 now supports the following devices:
Aficio MP 6002 / Aficio MP 7502 / Aficio MP 9002

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 Fixed
- A communication error can occur when using Internet Information
Service (IIS) as GlobalScan NX's webserver.
- Authentication Profiles are not imported correctly when a Profile
is imported to GlobalScan NX.
- The email format used by Send to Email does not conform to certain
RFC standards.
- Scanning output is rotated when the Original Orientation setting
is hidden on the Scan Settings Screen.
- Some PNG files would cause an error in the image processing
library.
- User login may unexpectedly fail if the Authentication Profile
uses LDAPS.
- Barcode output may be garbled if the code includes SJIS characters.
- Users may be unable to log in to a Project after a Profile
is synchronized to multiple devices at the same time.
- The GlobalScan NX HotFolder Plug-in Folder Monitor Setting Tool is
not displayed in Chinese when using a Chinese OS (China Edition
Only).

Others:
- Each GSNX SDK application now supports an independent server
priority in a failover environment (Server Edition Only).
- The sharing of Load Balance Servers is now possible in a failover
environment (Server Edition Only).
- The Section Splitter filter has been added to divide a job into
the configured sections (Server Edition Only).
- A new Auto Color Select feature has been added to the Scan Type
setting.
- The OCR mode can now be selected using the GlobalScan NX AdminTool
(Server Edition Only).
- The Auto Delete Errored Jobs setting has been added to delete
error jobs stored on the device (Serverless Edition Only).
- 1 job may now be redirected up to 10 times using Flow Redirector
filters.
- The destination path is now displayed in the job description when
the job succeeds.
- The GSNX SDK application can now connect to a target GSNX
AdminTool for self-synchronization as long as the SDK application
has no Profile.
- 2048-bit key length SSL certificates are now supported.
- Serverless Edition now can use the scheduled backup function
(Serverless Edition Only).
----------------------------------------
Version 2.0.1.0
Supported:
GlobalScan NX now supports the following devices:
Aficio MP 301
Aficio MPC 305/DSc530

Fixed:
The OCR Filter, PDF Converter, Image Convertor consume more of
GlobalScan NX's memory than is necessary (Server Edition).

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]
 ----------------------------------------
Version 2.0.0.0
Initial Release

D4885101O_forEDC_readme.txt[2017/09/13 7:39:34]