Scribd
Upload
4 views2 pages

Repeated Control Systems Questions

The document outlines key concepts and questions related to control systems, including definitions of system responses, stability analysis, and transfer functions. It covers topics such as block diagram reduction, PID controller concepts, and comparisons between open-loop and closed-loop systems. Additionally, it includes standard test inputs and derivation techniques for transfer functions from circuits and block diagrams.

Uploaded by

gvvj321
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views2 pages

Repeated Control Systems Questions

The document outlines key concepts and questions related to control systems, including definitions of system responses, stability analysis, and transfer functions. It covers topics such as block diagram reduction, PID controller concepts, and comparisons between open-loop and closed-loop systems. Additionally, it includes standard test inputs and derivation techniques for transfer functions from circuits and block diagrams.

Uploaded by

gvvj321
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Repeated Control Systems Questions (MSBTE 22531)

1. Define important system responses:

- Define transient response and steady state response.

- Define delay time and settling time.

- Define time response and steady state response.

2. System order and poles/zeroes:

- Calculate the order of a given system from its transfer function.

- Find poles and zeros from a given transfer function.

3. Block diagram reduction:

- State any four block diagram reduction rules with neat diagram.

- Apply block diagram reduction technique to simplify given systems.

4. Transfer function concepts:

- Define transfer function.

- Derive transfer function for simple closed-loop systems.

5. Stability analysis (Routh's Criterion):

- Discuss special cases of Routh's Criterion.

- Examine stability of system using Routh's stability criterion.

6. First and second order system responses:

- Sketch and label time response of a second order system.

- Draw response of first order control system showing effect of time constant.
- Define damping, damping ratio, undamped natural frequency, damped frequency.

7. PID Controller concepts:

- Describe PID control action with output equation and response.

- State the mathematical expression and principle of proportional control.

8. Open-loop vs Closed-loop comparison:

- Compare open-loop and closed-loop systems on feedback path, complexity, cost, and accuracy.

- Define marginally stable system with location of poles and sketch response.

9. Standard test inputs:

- Describe four standard test inputs with their mathematical expression and graphical representation.

10. Transfer function derivation from circuits or block diagrams:

- Derive transfer function of electrical circuits.

- Derive transfer function by block diagram simplification.

(Extracted from 22531 MSBTE Winter 2019, Summer 2022, and Summer 2023 Question Papers.)

You might also like