Scribd
Upload
13 views5 pages

Square Pen Stand

This document provides a step-by-step guide for designing a 3D printable pen stand using Tinkercad. It includes detailed instructions on creating and aligning boxes, converting shapes into holes, and preparing the design for 3D printing. The final steps involve exporting the design in .STL format and using slicing software for printing.

Uploaded by

prajaktakdm93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
13 views5 pages

Square Pen Stand

This document provides a step-by-step guide for designing a 3D printable pen stand using Tinkercad. It includes detailed instructions on creating and aligning boxes, converting shapes into holes, and preparing the design for 3D printing. The final steps involve exporting the design in .STL format and using slicing software for printing.

Uploaded by

prajaktakdm93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Square PEN Stand

This worksheet is a detailed guide towards designing a Spirograph that can be 3D


printed for use as an object of utility.

1) To make a pen stand, first add a box from basic shapes as shown in fig.1

Fig 1

LYDNOW EDUTECH PVT. LTD


502, Fortune House, Baner pashan Link Road, Pune-411021
www.lydnow.com​ |+91 9763163833 | 9607404630/31 ​ Page 1
● Set the dimensions as, ​length (l) =50mm, width (w) =50mm, height (h) =70mm​(in
millimeter). As shown in Fig (2).

Fig (2)

● Take another box and set the dimensions as, l​ength=47mm (to maintain thickness
3mm), width=47mm and height =80​as shown in fig (3).

Fig (3)

● Now do the center alignment of both the boxes. Raise the inner box ​3mm above the
work plane ​(To maintain thickness 3mm). Now convert the inner box into a hole by

LYDNOW EDUTECH PVT. LTD


502, Fortune House, Baner pashan Link Road, Pune-411021
www.lydnow.com​ |+91 9763163833 | 9607404630/31 ​ Page 2
clicking on the ‘hole’ icon then select both boxes together and click on ‘Group‘ icon
for grouping it as shown in Fig (4).

Fig (4)

● Take another block make its ​radius 2​, l​ ength=25mm width=55mm and
Height=37mm​as shown in fig. 5

Fig 5

● Lift the box ​35mm above the work plane, now select the whole object and ‘align’ it as
shown in fig 6. convert the box into a hole by clicking on the ‘hole’ button.

LYDNOW EDUTECH PVT. LTD


502, Fortune House, Baner pashan Link Road, Pune-411021
www.lydnow.com​ |+91 9763163833 | 9607404630/31 ​ Page 3
Fig 6

● Now move the hole box outward by 2mm(keep snap grid to 1mm and press the down
arrow key 2 times on keyboard. )

Fig 7

● Select the whole object and ‘Group’ it So that hole part will disappear and cut the
cylinder as shown in fig 8.

LYDNOW EDUTECH PVT. LTD


502, Fortune House, Baner pashan Link Road, Pune-411021
www.lydnow.com​ |+91 9763163833 | 9607404630/31 ​ Page 4
Fig 8

To 3D Print​: Export and save the file from tinkercad in .STL format. If you have a 3D
printer at home, use a slicing software like CURA to extract your gcode file needed!
Recommended print quality is Normal(Standard) i.e 0.12mm. Alternatively, you can
order your 3D print by contacting us.

LYDNOW EDUTECH PVT. LTD


502, Fortune House, Baner pashan Link Road, Pune-411021
www.lydnow.com​ |+91 9763163833 | 9607404630/31 ​ Page 5

You might also like