TC0048P
TC0048P
New Fixes/Features:
Updated processor support.
Fixed issue where system hangs during POST with certain USB
optical drives.
Revised the wording in BIOS setup strings.
Added improvements on security fixes.
Fixed security issues by adding SMM callout, Signing override,
and Signing recovery.
Updated VBIOS to version 2120.
New Fixes/Features:
Fixed issue where operating system installation is extremely
slow 12GB memory is installed.
Updated VBIOS to v.2111.
Fixed error beep for thermal trip.
New Fixes/Features:
Fixed issue with Intel ME firmware update.
New Fixes/Features:
Corrected socket type.
Fixed issue where users do not have view access to the bios if
a supervisor password is set and user access is set to no
access but the password is left as NULL.
Updated VBIOS to version 2086.
Updated PXE Option ROM.
Updated ME firmware to version 6.1.20.1059.
New Fixes/Features:
Fixed issue where system hangs with POST code EB.
New Fixes/Features:
Added an option for “Power On – PXE Boot” to setup item “Wake
on LAN from S5”.
Fixed issue with boot password error when using PS/2 keyboard
attached to certain KVMs.
New Fixes/Features:
Updated PCH reference code to the latest label.
Updated MCH reference code to the latest label.
Fixed issue where USB port #1 and #2 do not work in the
operating system Backwards Compatibility Mode is enabled.
Fixed issue where Hard Disk Pre-delay option in BIOS setup
does not work in AHCI mode.
Fixed issue where Intel Display Audio is not disabled when a
PCI Express x16 graphics card is installed.
New Fixes/Features:
Updated PCH reference code to the latest label.
Updated MCH reference code to the latest label.
Updated processor support.
Updated VBIOS to v2017.
New Fixes/Features:
Fixed issue where no video is displayed if both PCI and PCI-e
VGA cards are attached and primary video output is set to
integrated graphics.
Updated ME F/W to 6.1.0.1042.
Updated MEBx to 6.1.0.0005.
Updated processor support.
Updated VBIOS to 2009.
Updated QST payload to fix wrong description of fan-headers in
BIOS setup and Intel® Desktop Utilities.
Fixed issue where memory slot information of SMBIOS is not
correct.
Corrected memory over voltage setting on older boards.
Changed default setting of ASPM support to disable.
Improved primary video detection.
Fixed serial modem S1/S3 wake-up issue.
Fixed issue where system does not boot normally to the
operating system when using external VGA cards.
Added support for processor “Maximum Non-Turbo Ratio” in
Performance Page in BIOS setup menu.
Fixed wrong setting GPIO30.
Fixed issue where Video Configuration loses item Primary Video
Adaptor in BIOS setup menu.
Fixed wrong OEM Table ID for ACPI table.
Improved monitor not staying at sleep state when resuming from
S1/S3.
Reduced BIOS update time when ME F/W revisions are the same.
Improved the primary video detection algorithm to reduce S3
resume time.
Improved memory over voltage setting to fix noise during POST.
Enabled chipset ASPM support.
Removed MCH temperature monitor in setup menu.
Fixed issue where Wake on LAN still works after G3 when set to
stay off.
Fixed issue where some add-on cards not detected when plugged
into PCI-e x1 slot.
Fixed an issue where some PCI-e x1 cards would not work when
plugged into the PCI-e x16 slot.
New Fixes/Features:
Updated processor support.
Extended the lengths of SMBIOS type 1 and type 3 strings
fields.
Improved the function of wake-on-LAN after G3 (AC power
failure).
Improved potential security problems.
Changed Full Test Counter to „0‟ in FITC utility.
Updated VBIOS to version: 1931.
Updated ME F/W to version: 1194.
Fixed issue of wrong boot device priority when AHCI mode is
enabled.
Improved the Memory OC programming.
Fixed Power LED Indicator failure when putting system into
S1/S3 on the second time.
Changed SMBIOS type 10 on-board device name string of IGD.
New Fixes/Features:
Fixed issue with PAVP mode Enable.
Updated PCH/MCH reference code to the latest revision to
include SPEC update.
Updated values of CPU family for SMBIOS type4.
Updated SMBIOS type131.
Removed EDID checking to solve some HDMI receivers not
displaying correctly.
Changed setup options of “Memory Multiplier”.
Changed prompt message after recovery flash completes.
Added Front Fan and Rear Fan Duty Cycle setup option into Fan
Control page.
Fixed issue where Memory Multiplier and Memory Speed not
showing correctly in Performance page.
Fixed issue where user payload update not working.
Fixed issue where RCRB+2120h[16] not setting correctly.
Updated MEBX to version: 0019.
Updated SMBIOS CPU cache information.
Updated PCH reference code to the latest label.
Fixed issue where system cannot boot after changing Host-Clock
Frequency.
Removed supporting of non-reboot flashing method.
Added supporting of adjusting Memory timing for both LFD and
CKD.
Hid setup options of Processor ratio override.
Updated VBIOS to version: 1914.
Updated LFD MRC to version:1.20.
Updated GPIO57 of PCH to GPO(L).
Updated SATA GEN1 register settings.
Updated SMBIOS type4 and type7 data.
Changed detection of Chassis Intrusion to use CASEOPEN# of
SIO.
Changed default setting of “Detect Missing Fans” to “Log
Only”.
Fixed wrong settings of GPIO72 to PCH and GP55 to SIO on
S4/S5.
Added workaround for Display Flicker in FITC utility.
Removed unused microcode.
Changed Lock Mask to unlock Manual Fan Control and Thresholds
for the QST configuration.
New Fixes/Features:
Initial production BIOS release
LEGAL INFORMATION
Information in this document is provided in connection with Intel Products and for the
purpose of supporting Intel developed server/desktop boards and systems.