Scribd
Upload
139 views3 pages

Steps To Upgrade Firmware & LPDC For HP MFP

This document outlines the steps to upgrade firmware and LPDC for HP MFP printers, including downloading necessary files to a thumbdrive and configuring settings on the printer. Users are instructed to follow a series of steps involving plugging in the thumbdrive, selecting files, and completing the setup process. The document also explains how to verify the successful installation of LPDC and check printer information through the configuration page.

Uploaded by

workshop
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
139 views3 pages

Steps To Upgrade Firmware & LPDC For HP MFP

This document outlines the steps to upgrade firmware and LPDC for HP MFP printers, including downloading necessary files to a thumbdrive and configuring settings on the printer. Users are instructed to follow a series of steps involving plugging in the thumbdrive, selecting files, and completing the setup process. The document also explains how to verify the successful installation of LPDC and check printer information through the configuration page.

Uploaded by

workshop
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Steps to Upgrade Firmware & LPDC for HP MFP

1. Download firmware from following link and save in the thumbdrive before go onsite for deployment 
https://support.hp.com/us-en/drivers/printers

Download LPDC from following link and save in the thumbdrive before go onsite for deployment 
https://activation.jamanagement.hp.com/redirect?ReturnUrl=%2F

2. Plug in thumbdrive at the printer > Press on button HP logo > enter Administrator and select
Download

3. At the printer screen, select USB Thumbdrive

4. Select file > OK and the file will start transferring


5. After downloading completed, select continue

6. Wait until finish loading

7. Go to Initial Setup and configure setting as below:


Language  English
Location  Malaysia
Date Format  DD MMM, YYYY 24 hours
Auto Send  Disable
Print from USB  Disable
8. The firmware version and printer info can be retrieved from Reports > Configuration Page

9. Once LPDC had been successfully the last 2 digits of the printer model would change based on client’s
requirement 

In Configuration page under LPDC will show Configured (no. of time configured), if license speed yet to
upgrade LPDC will show Not Configured

You might also like