Scribd
Upload
15 views7 pages

Working With SP Flash Tool

The document provides a guide on using the SP Flash Tool to download or update firmware for MediaTek Android phones, including steps to revive a dead or bricked device. It outlines the necessary requirements and detailed steps for flashing the phone, emphasizing the importance of using the correct firmware. Users are advised to back up their devices before starting the process.

Uploaded by

JamesWachira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
15 views7 pages

Working With SP Flash Tool

The document provides a guide on using the SP Flash Tool to download or update firmware for MediaTek Android phones, including steps to revive a dead or bricked device. It outlines the necessary requirements and detailed steps for flashing the phone, emphasizing the importance of using the correct firmware. Users are advised to back up their devices before starting the process.

Uploaded by

JamesWachira
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

Working with SP Flash Tool

Last Updated : 18 Sep, 2020



SP flash tools are widely used to download/update the firmware of


MediaTek android phones. Using this one can revive a dead android
phone, resetting, fixing a bricked device. It can also be used for
testing memory.
Note: backup your android device before beginning this process.

Requirements

1. The latest version of the SP flash tool. Click here To Download.


2. Working USB cable.
3. MediaTek android phone.
4. MediaTek USB driver. Click here To Download.
5. Scatter file (for flashing android).
6. Working internet connection.
Note: Every particular android phones have a particular firmware,
use the one which is for your android else it can be bricked or even
dead.

Steps To Flash The Phone

Step 1: Install the drivers and update them.


Step 2: Unzip the downloaded SP Flash tool and
launch flash_tool.exe.
After extraction open the extracted folder and launch flash_tool.exe
It should look like this
Step 3: You can see the different options, now locate the Scatter-
loading File and choose the Android_scatter.txt from the firmware
folder.

Click “choose” in Scatter-loading File


Choose the Android_Scatter.txt file

Step 4: Choose Download Only and begin the download.


Step 5: After downloading it connect your phone through the USB
to the computer/laptop. (NOTE: your phone should be switched off)
Step 6: The phone will start flashing immediately after connecting
it to your computer/laptop.
Step 7: Wait for a while the downloading will be done and a green
tick will appear on the screen.
Bingo!!

Step 8: Disconnect the USB and turn your phone on, it should work
fine.
If the process stops automatically then choose the Format All +
Download option and follow the above steps carefully

You might also like