Section Guide

Introduction
About Wood Auto and PSH

Bulbs
Bulbs· Osram Bulbs· Bulb Holders

Vehicle Warning & Hazard Lighting

Beacons· Lightbars· Directional Warning

Commercial Vehicle Lighting

Marker Lamps· Combination Lamps· Individual Lamps· Driving Lamps

Work & Scene Lighting

Work Lamps· Exterior Lamps

Interior Lighting
Interior Lamps

Other Lighting
Lighting Accessories

Cable
Cable· Sleeving· Ties· Fixings· Battery Leads· Connectors and Terminals

Circuit Protection
Fuses· Fuse Holders· Fuse Boxes

Circuit Control
Relays

Switches
Solenoids· Battery Isolator Switches· Ignition Switches· Rocker Switches
Toggle Switches· Push/Pull Switches· Telemecanique Switches

Towing
Plugs and Sockets· Coils· Intelligent Towing Controllers

Reversing & Safety

Horns· Reverse Alarms· Seatbelt Safety· Vehicle Camera Equipment

Power Conversion
Voltage Droppers· Inverters· Battery-to-Battery

Workshop & Test Equipment

Batteries· Tape· Soldering· Tools

Index
Index· Product Index

1
Bulbs
Bulb PSH V W ECE Cap Notes Section Figure
BLBOD1R 080.000.516.430 12/85 35 D1R PK32d-3 HID Gas Discharge 24
BLBOD1S 080.000.517.430 12/85 35 D1S PK32d-2 HID Gas Discharge 25
BLBOD2R 080.000.518.430 12/85 35 D2R P32d-3 HID Gas Discharge 26
BLBOD2S 080.000.519.430 12/85 35 D2S P32d-2 HID Gas Discharge 27
BLBOD3S 080.000.520.430 12/42 35 D3S PK32d-5 HID Gas Discharge 28
BLBH08 080.000.438.430 12 35 H8 PGJ19-1 Halogen Headlamps 7
BLBH09 080.000.439.430 12 65 H9 PGJ19-5 Halogen Headlamps 8
BLBH10 080.000.440.430 12 42 H10 PY20d Halogen Headlamps 10
BLBH11 080.000.441.430 12 55 H11 PGJ19-2 Halogen Headlamps 11
BLBH11A 080.000.442.430 24 70 H11 PGJ19-2 Halogen Headlamps 11
BLBHB12 080.000.445.430 12 60/55 H4 P45t Halogen Headlamps 5
BLBHB24 080.000.446.430 24 75/70 H4 P45t Halogen Headlamps 5
BLB27 080.000.189.430 12 48 BA15d (SBC) Asymmetric & Standard 30
BLB123 080.000.129.430 12 36 BA15d (SBC) Asymmetric & Standard 30
BLB149 080.000.131.430 24 5 BA15s (SCC) Side, Tail, Marker 53
BLB150 080.000.134.430 24 5 BA15d (SBC) Side, Tail, Marker 52
BLB171 080.000.136.430 12 36/36 BA15d (SBC) Asymmetric & Standard 31
BLB207 080.000.141.430 12 5 BA15s (SCC) Side, Tail, Marker 53
BLB209 080.000.144.430 12 5 BA15d (SBC) Side, Tail, Marker 52
BLB212 080.000.149.430 24 15 BA15s (SCC) 23x43mm Stop, Flasher, Rear Fog, Reverse 40
BLB217 080.000.151.430 12 45/40 BA21d (OSP) 3-pin Bus 75
BLB233 080.000.154.430 12 4 T4W BA9s (MCC) Side, Tail, Marker 51
BLB239 080.000.158.430 12 5 C5W SV8.5-8 Festoon 72
BLB239A 080.000.158.430 12 5 C5W SV8.5-8 Festoon 73
BLB241 080.000.160.430 24 21 BA15s (SCC) Stop, Flasher, Rear Fog, Reverse 40
BLB241B 080.000.161.430 24 25 BA15s (SCC) Stop, Flasher, Rear Fog, Reverse 40
BLB242 080.000.162.430 24 5 C5W SV8.5-8 Festoon 72
BLB245 080.000.166.430 12 10 BA15s (SCC) Side, Tail, Marker 53
BLB245D 080.000.167.430 12 10 BA15d (SBC) Side, Tail, Marker 52
BLB246 080.000.169.430 24 10 BA15s (SCC) Side, Tail, Marker 53
BLB246D 080.000.170.430 24 10 BA15d (SBC) Side, Tail, Marker 52
BLB249 080.000.174.430 24 4 T4W BA9s (MCC) Side, Tail, Marker 51
BLB256 080.000.176.430 12 3 C5W S7d Festoon 70
BLB256A 080.000.177.430 12 3 C5W S6d Festoon 69
BLB256B ??? 24 3 C5W S7d Festoon 70
BLB256C 080.000.178.430 24 3 C5W S7d Festoon 68
BLB257 080.000.179.430 12 3 C5W S7d Festoon 68
BLB260 080.000.081.431 24 5 C5W SV8.5-8 Festoon 73
BLB261 080.000.182.430 12 5 C5W S7d Festoon 67
BLB265 080.000.191.430 12 10 C5W SV8.5-8 Festoon 73
BLB265A 080.000.184.430 12 10 C5W SV8.5-8 Festoon 74
BLB269 080.000.187.430 12 10 C5W SV8.5-8 Festoon 71
BLB269A 080.000.188.430 24 10 C5W SV8.5-8 Festoon 71
BLB270 080.000.190.430 12 18 C5W SV8.5-8 Festoon 74
BLB272 080.000.191.430 12 10 C5W SV8.5-8 Festoon 72
BLB273 080.000.192.430 12 21 C5W SV8.5-8 Festoon 74
BLB274 080.000.391.430 24 10 C5W SV8.5-8 Festoon 73
BLB274A 080.000.194.430 24 10 C5W SV8.5-8 Festoon 72
BLB275 080.000.195.430 24 21 C5W SV8.5-8 Festoon 74
BLB276 080.000.196.430 24 15 C5W SV8.5-8 Festoon 74
BLB281 080.000.199.430 12 2 BA7s (two lug) Panel, Indicator 60
BLB283 080.000.201.430 24 3 BA7s (two lug) Panel, Indicator 60
BLB286 080.000.203.430 12 1.2 W2x4.6d Wedge Base Panel 59
BLB286A 080.000.204.430 12 1.2 W2x4.6d Amber Wedge Base Panel 59
BLB286B 080.000.205.430 12 1.2 W2x4.6d Blue Wedge Base Panel 59
BLB286G 080.000.206.430 12 1.2 W2x4.6d Green Wedge Base Panel 59
BLB286R 080.000.207.430 12 1.2 W2x4.6d Red Wedge Base Panel 59
PCB286T 080.000.525.430 12 1.2 B8.5d Black PCB 78
PCB286T8W 080.000.527.430 12 2.0 BX8.3d White PCB 77
PCB286TB 080.000.528.430 12 1.5 B8.5d Beige PCB 78

2
 Bulbs
Bulb V W ECE Cap Notes Section Figure
PCB286TF 080.000.529.430 12 1.2 BX8.3d Grey PCB 77
PCB286TFT 080.000.530.430 12 1.2 BG8.5-5.5d Black PCB 79
PCB286THZ 080.000.533.430 12 1.2 SG8.5 5.5d Black PCB 82
PCB286TSL 080.000.540.430 12 1.2 B8.5 S40 Black PCB 80
BLB288 080.000.209.430 12 2 BA9s (MCC) Panel, Indicator 61
BLB289 080.000.210.430 24 2 BA9s (MCC) Panel, Indicator 61
BLB290 080.000.211.430 24 21 BA15s (SCC) Heavy Duty Stop, Flasher, Rear Fog, Reverse 40
BLB297 080.000.214.430 12 2 W2.1x9.5d Side, Tail, Marker 54
BLB326 080.000.223.430 12 38 P36d (BPFdc) Transverse filament British Pre-Focus 37
BLB330 080.000.224.430 24 44 P36d (BPFdc) Transverse filament British Pre-Focus 37
BLB334 080.000.227.430 24 21/5 BAY15d Stop, Tail, Indicator 47
BLB335 080.000.228.430 12 21 BA15d (SBC) Stop, Flasher, Rear Fog, Reverse 39
BLB338 080.000.232.430 24 18 BA15d (SBC) Stop, Flasher, Rear Fog, Reverse 39
BLB339 080.000.233.430 24 24 BA15s (SCC) Stop, Flasher, Rear Fog, Reverse 40
BLB345 080.000.235.430 28 26 BA15s (SCC) Long life Stop, Flasher, Rear Fog, Reverse 40
BLB346 080.000.236.430 24 21 BA15d (SBC) Stop, Flasher, Rear Fog, Reverse 39
BLB380 080.000.241.430 12 21/5 BAY15d 47mm high OSP Stop, Tail, Indicator 47
BLB380R 080.000.244.430 12 21/5 BAY15d Red Stop, Tail, Indicator 47
BLB380W 080.000.245.430 12 21/5 W21/5W W3x16q Stop, Tail, Indicator 49
BLB380Y 080.000.246.430 12 21/5 BAY15d Amber Stop, Tail, Indicator 47
BLB381 080.000.247.430 12 21/5 BAY15d Level pin Stop, Tail, Indicator 47
BLB382 080.000.248.430 12 21 BA15s (SCC) Stop, Flasher, Rear Fog, Reverse 40
BLB382A 080.000.249.430 12 25 BA15s (SCC) Stop, Flasher, Rear Fog, Reverse 40
BLB382R 080.000.256.430 12 21 BA15s (SCC) Red Stop, Flasher, Rear Fog, Reverse 40
BLB382W 080.000.257.430 12 21 W21W W3x16d Stop, Flasher, Rear Fog, Reverse 45
BLB382WA 080.000.258.430 12 21 W21W W3x16d Amber Stop, Flasher, Rear Fog, Reverse 45
BLB382Y 080.000.259.430 12 21 BA15s (SCC) Amber Stop, Flasher, Rear Fog, Reverse 40
BLB385 080.000.261.430 12 21 P21W BAW15s (SCC) Red Stop, Flasher, Rear Fog, Reverse 41
BLB394 080.000.266.430 12 25/25 BA20d (Bosch) Asymmetric & Standard 32
BLB395 080.000.267.430 12 35/35 BA20d (Bosch) Asymmetric & Standard 32
BLB395A 080.000.268.430 12 35 BA20s Asymmetric & Standard 33
BLB395C 080.000.269.430 12 35/35 BA20d (Bosch) Cobalt Asymmetric & Standard 32
BLB396 080.000.272.430 12 45/40 BA20d (Bosch) Asymmetric & Standard 32
BLB397 080.000.273.430 12 45 BA20s Asymmetric & Standard 33
BLB410 080.000.279.430 12 45/40 P45t (UEC) Asymmetric & Standard 35
BLB410H 080.000.280.430 12 45/40 H4 P45t Halogen Headlamps 5
BLB411 080.000.281.430 12 45/40 P45t (UEC) Yellow Asymmetric & Standard 35
BLB414 080.000.283.430 12 38 P36d (BPFdc) Transverse filament British Pre-Focus 38
BLB416 080.000.284.430 12 60/60 P45t (UEC) Asymmetric & Standard 35
BLB429 080.000.286.430 24 55/50 P45t (UEC) Asymmetric & Standard 35
BLB433 080.000.289.430 12 20 BA9s (MCC) Miniature Halogens 55
BLB433A 080.000.290.430 12 5 BA9s (MCC) Miniature Halogens 55
BLB433B 080.000.291.430 12 10 BA9s (MCC) Miniature Halogens 55
BLB433C 080.000.292.430 12 6 H6W BAX9s (MCC) (OSP) Miniature Halogens 57
BLB433D 080.000.293.430 12 21 H21W BAY9s (OSP) Miniature Halogens 56
BLB433E 080.000.294.430 24 21 H21W BAY9s (OSP) Miniature Halogens 56
BLB434 080.000.296.430 12 10 G4 Miniature Halogens 58
BLB434A 080.000.297.430 12 20 G4 Miniature Halogens 58
BLB434F 080.000.301.430 24 10 G4 Miniature Halogens 58
BLB434G 080.000.302.430 24 20 G4 Miniature Halogens 58
BLB437 080.000.303.430 24 44 P36d (BPFdc) Transverse filament British Pre-Focus 38
BLB448 080.000.304.430 12 55 H1 P14.5s Halogen Headlamps 1
BLB453 080.000.308.430 12 55 H3 PK22s Halogen Headlamps 3
BLB460 080.000.314.430 24 70 H3 PK22s Halogen Headlamps 3
BLB466 080.000.317.430 24 70 H1 P14.5s Halogen Headlamps 1
BLB472 080.000.318.430 12 60/55 H4 P43t Halogen Headlamps 4
BLB472B 080.000.319.430 12 35/35 HS1 PX43t Halogen Headlamps 21
BLB475 080.000.327.430 24 75/70 H4 P43t Halogen Headlamps 4
BLB479 080.000.333.430 12 55 H2 X511 Halogen Headlamps 2
BLB480 080.000.334.430 24 70 H2 X511 Halogen Headlamps 2

3
Bulbs
Bulb V W ECE Cap Notes Section Figure
BLB499 080.000.349.430 12 55 H7 PX26d Halogen Headlamps 6
BLB499A 080.000.350.430 24 70 H7 PX26d Halogen Headlamps 6
BLB501 080.000.360.430 12 5 W2.1x9.5d Side, Tail, Marker 54
BLB501A 080.000.361.430 12 5 W2.1x9.5d Amber Side, Tail, Marker 54
BLB504 080.000.365.430 12 3 W2.1x9.5d Side, Tail, Marker 54
BLB505 080.000.366.430 24 3 W2.1x9.5d Side, Tail, Marker 54
BLB507 080.000.367.430 24 5 W2.1x9.5d Side, Tail, Marker 54
BLB508 080.000.368.430 24 1.2 W2x4.6d Wedge Base Panel 59
BLB508A 080.000.369.430 24 1.2 W2x4.6d Amber Wedge Base Panel 59
BLB508B 080.000.370.430 24 1.2 W2x4.6d Blue Wedge Base Panel 59
BLB508G 080.000.371.430 24 1.2 W2x4.6d Green Wedge Base Panel 59
BLB508R 080.000.372.430 24 1.2 W2x4.6d Red Wedge Base Panel 59
PCB508T 080.000.548.430 24 1.2 B8.5d Grey PCB 78
PCB508TV 080.000.550.430 24 1.2 BX8.3d Grey PCB 77
PCB512PCBX 080.000.554.430 12 2.0 B12d White PCB 81
BLB514 080.000.375.430 12 1.1 T4.2 (with tails) 25mm tails Panel, Indicator 64
BLB566 080.000.379.430 12 21/4 P21/4W BAZ15d Fog, Tail 50
BLB566A 080.000.380.430 24 21/4 P21/4W BAZ15d Fog, Tail 50
BLB567 080.000.381.430 12 21/5 PR21/5W BAW15d Red Stop, Flasher, Rear Fog, Reverse 43
BLB581 080.000.384.430 12 21 PY21W BAU15s (OSP) Amber Stop, Flasher, Rear Fog, Reverse 44
BLB581A 080.000.385.430 24 21 PY21W BAU15s (OSP) Amber Stop, Flasher, Rear Fog, Reverse 44
BLB582 080.000.386.430 12 21 PY21W BAU15s (OSP) Stop, Flasher, Rear Fog, Reverse 42
BLB583 080.000.387.430 12 23 BA15s (SCC) Amber Stop, Flasher, Rear Fog, Reverse 40
BLB643 080.000.389.430 12 2.2 BA9s (MCC) Panel, Indicator 62
BLB650 080.000.390.430 24 2.8 E10/13 (MES) Panel, Indicator 63
BLB653 080.000.391.430 24 6 C5W SV8.5-8 Festoon 72
BLB809 080.000.402.430 12 24 B22d (BC) Pearl Bus 76
BLB816 080.000.404.430 24 12 B22d (BC) Pearl Bus 76
BLB821 080.000.405.430 24 20 B22d (BC) Pearl Bus 76
BLB874 080.000.409.430 28 7 BA15s (SCC) Side, Tail, Marker 53
BLB881 080.000.413.430 12 27 H27/2W PGJ13 Halogen Headlamps 15
BLB885 080.000.414.430 12 50 H27/1W PG13 Halogen Headlamps 14
BLB886 080.000.415.430 12 50 H27/2W PGJ13 Halogen Headlamps 16
BLB896 080.000.417.430 12 37.5 H27/2W PGJ13 Halogen Headlamps 16
BLB921 080.000.428.430 12 21 W16W W2.1x9.5d Capless High Level Brake Bulbs 46
BLB921A 080.000.429.430 12 21 W16W W2.1x9.5d Capless Amber High Level Brake Bulbs 46
BLB921B 080.000.430.430 12 16 W16W W2.1x9.5d Capless High Level Brake Bulbs 46
OSR921 080.000.105.431 12 16 W16W W2.1x9.5d Capless OSRAM Original High Level Brake Bulbs 46
OSR921NA 080.000.106.431 12.8 16 W16W W2.1x9.5d Capless OSRAM Original High Level Brake Bulbs 46
BLB987 080.000.435.430 12 2.2 E10/13 (MES) Panel, Indicator 63
OSR2825 080.000.009.431 12 5 W2.1x9.5d OSRAM Original Side, Tail, Marker 54
OSR2845 080.000.014.431 24 5 W2.1x9.5d OSRAM Original Side, Tail, Marker 54
BLB3157 080.000.218.430 12 27/7 P27/7W W2.5x16q PCB Stop, Tail, Indicator 48
OSR3157 080.000.015.431 12 27/7 P27/7W W2.5x16q OSRAM Original Stop, Tail, Indicator 48
OSR3893 080.000.018.431 12 4 T4W BA9s (MCC) OSRAM Original Side, Tail, Marker 51
OSR3930 080.000.019.431 24 4 T4W BA9s (MCC) OSRAM Original Side, Tail, Marker 51
OSR3930TSP 080.000.020.431 24 4 T4W BA9s (MCC) OSRAM Truckstar Pro Side, Tail, Marker 51
OSR5007 080.000.021.431 12 5 BA15s (SCC) OSRAM Original Side, Tail, Marker 53
OSR5627 080.000.023.431 24 5 BA15s (SCC) OSRAM Original Side, Tail, Marker 53
OSR5627TSP 080.000.024.431 24 5 BA15s (SCC) OSRAM Truckstar Pro Side, Tail, Marker 53
BLB5677 080.000.382.430 12 35/35 APF Asymmetric & Standard 36
BLB5679 080.000.383.430 12 45/40 APF Asymmetric & Standard 36
OSR6411 080.000.162.430 12 10 C5W SV8.5-8 OSRAM Original Festoon 73
OSR6413 080.000.053.431 12 5 C5W SV8.5-8 OSRAM Original Festoon 73
OSR6418 080.000.053.431 12 5 C5W SV8.5-8 OSRAM Original Festoon 72
OSR6423 080.000.081.431 24 5 C5W SV8.5-8 OSRAM Original Festoon 72
BLB7025 080.000.394.430 12 35/25 P15d-3 Asymmetric & Standard 34
BLB7027 080.000.395.430 12 35/35 P15d-3 Asymmetric & Standard 34
OSR7504 080.000.090.431 12 21 W21W W3x16d Amber, OSRAM Original Stop, Flasher, Rear Fog, Reverse 45
OSR7505 080.000.091.431 12 21 W21W W3x16d OSRAM Original Stop, Flasher, Rear Fog, Reverse 45

4
 Bulbs
Bulb V W ECE Cap Notes Section Figure
OSR7506 080.000.092.431 12 21 BA15s (SCC) OSRAM Original Stop, Flasher, Rear Fog, Reverse 40
OSR7507 080.000.094.431 12 21 PY21W BAU15s (OSP) OSRAM Original Stop, Flasher, Rear Fog, Reverse 44
OSR7510TSP 080.000.095.431 24 21 PY21W BAU15s (OSP) OSRAM Truckstar Pro Stop, Flasher, Rear Fog, Reverse 44
OSR7511 080.000.096.431 24 21 BA15s (SCC) OSRAM Original Stop, Flasher, Rear Fog, Reverse 40
OSR7515 080.000.098.431 12 21/5 W21/5W W3x16q OSRAM Original Stop, Tail, Indicator 49
OSR7528 080.000.099.431 12 21/5 BAY15d OSRAM Original Stop, Tail, Indicator 47
OSR7537 080.000.100.431 24 21/5 BAY15d OSRAM Original Stop, Tail, Indicator 47
BLB9004 080.000.419.430 12 65/45 HB1 P29t Halogen Headlamps 17
BLB9005 080.000.420.430 12 60 HB3 P20d (90˚) Halogen Headlamps 18
OSR9005 080.000.101.431 12 60 HB3 P20d (90˚) OSRAM Original Halogen Headlamps 18
OSR9005NL... 080.000.103.431 12 60 HB3 P20d (90˚) OSRAM Night Breaker Laser Halogen Headlamps 18
BLB9006 080.000.424.430 12 51 HB4 P22d (90˚) Halogen Headlamps 19
OSR9012 080.000.104.431 12 55 HIR2 PX22d OSRAM Original Halogen Headlamps 20
PHL12085 080.000.109.432 12 19 P519W PG20-1 PHILIPS HiPerVision Daylight Running/Fog 23
PHL12174 080.000.110.432 12 24 PWY24W WP3.3x14.5/4 PHILIPS HiPerVision Indicator 66
PHL12271 080.000.114.432 12 16 PCY16W PU20d/2 PHILIPS HiPerVision Indicator 65
PHL12277 080.000.116.432 12 13 P13W PG18.5d-1 PHILIPS HiPerVision Daylight Running/Fog 22
OSR64132 080.000.034.431 12 6 H6W BAX9s (MCC) (OSP) OSRAM Original Miniature Halogens 57
OSR64150 080.000.037.431 12 55 H1 P14.5s OSRAM Original Halogen Headlamps 1
OSR64150NBS... ??? 12 55 H1 P14.5s OSRAM Night Breaker Silver Halogen Headlamps 1
OSR64150NL... ??? 12 55 H1 P14.5s OSRAM Night Breaker Laser Halogen Headlamps 1
OSR64151 080.000.042.431 12 55 H3 PK22s OSRAM Original Halogen Headlamps 3
OSR64151NL... 080.000.043.431 12 55 H3 PK22s OSRAM Night Breaker Laser Halogen Headlamps 3
OSR64155 080.000.044.431 24 70 H1 P14.5s OSRAM Original Halogen Headlamps 1
OSR64155TSP... ??? 24 70 H1 P14.5s OSRAM Truckstar Pro Halogen Headlamps 1
OSR64156 080.000.047.431 24 70 H3 PK22s OSRAM Original Halogen Headlamps 3
OSR64156TSP... 080.000.048.431 24 70 H3 PK22s OSRAM Truckstar Pro Halogen Headlamps 3
OSR64173 080.000.049.431 12 55 H2 X511 OSRAM Original Halogen Headlamps 2
OSR64176 080.000.050.431 12 55/15 H15 PGJ23t-1 OSRAM Original Halogen Headlamps 13
OSR64177 080.000.051.431 24 60/20 H15 PGJ23t-1 OSRAM Original Halogen Headlamps 13
OSR64178 080.000.052.431 12 60/55 H13 P26.4t OSRAM Original Halogen Headlamps 12
OSR64193 080.000.054.431 12 60/55 H4 P43t OSRAM Original Halogen Headlamps 4
OSR64193NBS... ??? 12 60/55 H4 P43t OSRAM Night Breaker Silver Halogen Headlamps 4
OSR64193NL... 080.000.058.431 12 60/55 H4 P43t OSRAM Night Breaker Laser Halogen Headlamps 4
OSR64193ULT... 080.000.060.431 12 60/55 H4 P43t OSRAM Ultra Life Halogen Headlamps 4
OSR64196 080.000.061.431 24 75/70 H4 P43t OSRAM Original Halogen Headlamps 4
OSR64196TSP... 080.000.062.431 24 75/70 H4 P43t OSRAM Truckstar Pro Halogen Headlamps 4
OSR64210... 080.000.063.431 12 55 H7 PX26d OSRAM Original Halogen Headlamps 6
OSR64210NL... ??? 12 55 H7 PX26d OSRAM Night Breaker Laser Halogen Headlamps 6
OSR64211 080.000.070.431 12 55 H11 PGJ19-2 OSRAM Original Halogen Headlamps 11
OSR64211NL... 080.000.072.431 12 55 H11 PGJ19-2 OSRAM Night Breaker Laser Halogen Headlamps 11
OSR64212... 080.000.073.431 12 35 H8 PGJ19-1 OSRAM Original Halogen Headlamps 7
OSR64212NL... 080.000.074.431 12 35 H8 PGJ19-1 OSRAM Night Breaker Laser Halogen Headlamps 7
OSR64213 080.000.075.431 12 65 H9 PGJ19-5 OSRAM Original Halogen Headlamps 8
OSR64215... 080.000.076.431 24 70 H7 PX26d OSRAM Original Halogen Headlamps 6
OSR64215TSP... ??? 24 70 H7 PX26d OSRAM Truckstar Pro Halogen Headlamps 6
OSR64243 080.000.082.431 12 65 H9B PGJY19-5 OSRAM Original Halogen Headlamps 9
OSR66140 080.000.083.431 12/85 35 D1S PK32d-2 OSRAM Xenarc Original HID Gas Discharge 25
OSR66150 080.000.084.431 12/85 35 D1R PK32d-3 OSRAM Xenarc Original HID Gas Discharge 24
OSR66240 ??? 12/85 35 D2S P32d-2 OSRAM Xenarc Original HID Gas Discharge 27
OSR66250 ???? 12/85 35 D2R P32d-3 OSRAM Xenarc Original HID Gas Discharge 26
OSR66340 080.000.085.431 12/42 35 D3S PK32d-5 OSRAM Xenarc Original HID Gas Discharge 28
OSR66548 080.000.086.431 12/42 25 D8S PK32d-1 OSRAM Xenarc Original HID Gas Discharge 29

5
Bulbs
Halogen Headlamps
1. H1 Cap P14.5s Filament 3. H3 Cap PK22s Filament

10
11.5

25 22.25

42
67.5
10

18.5 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB448 080.000.304.430 12 55 BLB453 080.000.308.430 12 55
OSR64150 080.000.037.431 12 55 OSRAM Original OSR64151 080.000.042.431 12 55 OSRAM Original
OSR64150NBS... ??? 12 55 OSRAM Night Breaker Silver OSR64151NL... 080.000.043.431 12 55 OSRAM Night Breaker Laser
OSR64150NL... ??? 12 55 OSRAM Night Breaker Laser BLB460 080.000.314.430 24 70
BLB466 080.000.317.430 24 70 OSR64156 080.000.047.431 24 70 OSRAM Original
OSR64155 080.000.044.431 24 70 OSRAM Original OSR64156TSP... 080.000.048.431 24 70 OSRAM Truckstar Pro
OSR64155TSP... ??? 24 70 OSRAM Truckstar Pro

2. H2 Cap X511 Filament 4. H4 Cap P43t Filament

17
9

43

21.5 max
31
82

20.5 32

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB479 080.000.333.430 12 55 BLB472 080.000.318.430 12 60/55
OSR64173 080.000.049.431 12 55 OSRAM Original OSR64193 080.000.054.431 12 60/55 OSRAM Original

BLB480 080.000.334.430 24 70 OSR64193NBS... ??? 12 60/55 OSRAM Night Breaker Silver

OSR64193NL... 080.000.058.431 12 60/55 OSRAM Night Breaker Laser
OSR64193ULT... 080.000.060.431 12 60/55 OSRAM Ultra Life
BLB475 080.000.327.430 24 75/70
OSR64196 080.000.061.431 24 75/70 OSRAM Original
OSR64196TSP... 080.000.062.431 24 75/70 OSRAM Truckstar Pro

6
 Bulbs
Halogen Headlamps
5. H4 Cap P45t Filament 7. H8 Cap PGJ19-1 Filament

17
11.6

43
19

82 25
47.4

15 max

32

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB410H 080.000.280.430 12 45/40 BLBH08 080.000.438.430 12 35
BLBHB12 080.000.445.430 12 60/55 OSR64212... 080.000.073.431 12 35 OSRAM Original
BLBHB24 080.000.446.430 24 75/70 OSR64212NL... 080.000.074.431 12 35 OSRAM Night Breaker Laser

6. H7 Cap PX26d Filament 8. H9 Cap PGJ19-5 Filament

11.6
11.6
34

19
41±2
43
25+0.2
25

15 max
16 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB499 080.000.349.430 12 55 BLBH09 080.000.439.430 12 65
OSR64210... 080.000.063.431 12 55 OSRAM Original OSR64213 080.000.075.431 12 65 OSRAM Original
OSR64210NL... ??? 12 55 OSRAM Night Breaker Laser
BLB499A 080.000.350.430 24 70
OSR64215... 080.000.076.431 24 70 OSRAM Original
OSR64215TSP... ??? 24 70 OSRAM Truckstar Pro

7
Bulbs
Halogen Headlamps
9. H9B Cap PGJY19-5 Filament 11. H11 Cap PGJ19-2 Filament

12
11.6

43 19

67
25

15 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

OSR64243 080.000.082.431 12 65 OSRAM Original BLBH11 080.000.441.430 12 55
OSR64211 080.000.070.431 12 55 OSRAM Original
OSR64211NL... 080.000.072.431 12 55 OSRAM Night Breaker Laser
BLBH11A 080.000.442.430 24 70

10. H10 Cap PY20d Filament 12. H13 Cap P26.4t Filament

16 16

55
25.2

31.5 78.5 88

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLBH10 080.000.440.430 12 42 OSR64178 080.000.052.431 12 60/55 OSRAM Original

8
 Bulbs
Halogen Headlamps
13. H15 Cap PGJ23t-1 Filament 15. H27/2W Cap PGJ13 Filament

13

25.4 62.7
max
79

WA Ref PSH V W Notes WA Ref PSH V W Notes

OSR64176 080.000.050.431 12 55/15 OSRAM Original BLB881 080.000.413.430 12 27
OSR64177 080.000.051.431 24 60/20 OSRAM Original

14. H27/1W Cap PG13 Filament 16. H27/2W Cap PGJ13 Filament

9
max

26

24
38.5 25.4 62.7
67 max
max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB885 080.000.414.430 12 50 BLB896 080.000.417.430 12 37.5
BLB886 080.000.415.430 12 50

9
 Bulbs
Halogen Headlamps
17. HB1 Cap P29t Filament 19. HB4 Cap P22d (90°) Filament

33.8 22.3
12

42.5

62.3
25.2
44.5
± 0.3

23.7

22.5
32
22
30

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB9004 080.000.419.430 12 65/45 BLB9006 080.000.424.430 12 51

18. HB3 Cap P20d (90°) Filament 20. HIR2 Cap PX22d Filament

22.3
12

25.2

22.5

20
30

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB9005 080.000.420.430 12 60 OSR9012 080.000.104.431 12 55 OSRAM Original
OSR9005 080.000.101.431 12 60 OSRAM Original
OSR9005NL... 080.000.103.431 12 60 OSRAM Night Breaker Laser

10
 Bulbs
Halogen Headlamps Daylight Running / Fog
21. HS1 Cap PX43t Filament 22. P13W Cap PG18.5d-1 Filament

WA Ref PSH V W Notes

BLB472B 080.000.319.430 12 35/35

WA Ref PSH V W Notes

PHL12277 080.000.116.432 12 13 PHILIPS HiPerVision

23. PS19W Cap PG20-1 Filament

WA Ref PSH V W Notes

PHL12085 080.000.109.432 12 19 PHILIPS HiPerVision

11
 Bulbs
HID Gas Discharge
24. D1R Cap PK32d-3 HID 26. D2R Cap P32d-3 HID

50
50
max

25 25
32

32
32
WA Ref PSH V W Notes WA Ref PSH V W Notes
BLBOD1R 080.000.516.430 12/85 35 BLBOD2R 080.000.518.430 12/85 35
OSR66150 080.000.084.431 12/85 35 OSRAM Xenarc Original OSR66250 ??? 12/85 35 OSRAM Xenarc Original

25. D1S Cap PK32d-2 HID 27. D2S Cap P32d-2 HID

50 50
max

25
25
32

32
32

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLBOD1S 080.000.517.430 12/85 35 BLBOD2S 080.000.519.430 12/85 35
OSR66140 080.000.083.431 12/85 35 OSRAM Xenarc Original OSR66240 ??? 12/85 35 OSRAM Xenarc Original

12
 Bulbs
HID Gas Discharge Asymmetric & Standard
28. D3S Cap PK32d-5 HID 30. Cap BA15d (SBC) Filament
38

50

56
17 max
25
15.3 max

32

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLBOD3S 080.000.520.430 12/42 35 BLB27 080.000.189.430 12 48
OSR66340 080.000.085.431 12/42 35 OSRAM Xenarc Original BLB123 080.000.129.430 12 36

29. D8S Cap PK32d-1 HID 31. Cap BA15d (SBC) Filament
38

56
17 max

15.3 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

OSR66548 080.000.086.431 12/42 25 OSRAM Xenarc Original BLB171 080.000.136.430 12 36/36

13
 Bulbs
Asymmetric & Standard Headlamps
32. Cap BA20d (Bosch) Filament 34. Cap P15d-3 Filament

35 30

54
70 24.5 max

20.1 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB394 080.000.266.430 12 25/25 BLB7025 080.000.394.430 12 35/25
BLB395 080.000.267.430 12 35/35 BLB7027 080.000.395.430 12 35/35
BLB395C 080.000.269.430 12 35/35 Cobalt
BLB396 080.000.272.430 12 45/40

33. Cap BA20s Filament 35. Cap P45t (UEC) Filament

35.5 40

65
24.5 max 82 47.4
20.1 max

32

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB395A 080.000.268.430 12 35 BLB410 080.000.279.430 12 45/40
BLB397 080.000.273.430 12 45 BLB411 080.000.281.430 12 45/40 Yellow
BLB416 080.000.284.430 12 60/60
BLB429 080.000.286.430 24 55/50

14
 Bulbs
British Pre-Focus
36. Cap APF Filament 38. Cap P36d (BPFdc) Filament

30 28

54
64 36

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB5677 080.000.382.430 12 35/35 BLB414 080.000.283.430 12 38 Transverse filament
BLB5679 080.000.383.430 12 45/40 BLB437 080.000.303.430 24 44 Transverse filament

37. Cap P36d (BPFdc) Filament

28

64
36

WA Ref PSH V W Notes

BLB326 080.000.223.430 12 38 Transverse filament
BLB330 080.000.224.430 24 44 Transverse filament

15
 Bulbs
Stop, Flasher, Rear Fog, Reverse Bulbs
39. Cap BA15d (SBC) Filament 40. Cap BA15s (SCC) Filament

25 25

17 max
47 17 max 47
15.3 max
15.3 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB335 080.000.228.430 12 21 BLB382 080.000.248.430 12 21
BLB338 080.000.232.430 24 18 OSR7506 080.000.092.431 12 21 OSRAM Original
BLB346 080.000.236.430 24 21 BLB382Y 080.000.259.430 12 21 Amber 
BLB382R 080.000.256.430 12 21 Red 
BLB583 080.000.387.430 12 23 Amber 
BLB382A 080.000.249.430 12 25
BLB241 080.000.160.430 24 21
OSR7511 080.000.096.431 24 21 OSRAM Original
BLB339 080.000.233.430 24 24
BLB212 080.000.149.430 24 15 23x43mm
BLB290 080.000.211.430 24 21 Heavy Duty
BLB241B 080.000.161.430 24 25
BLB345 080.000.235.430 28 26 Long life

16
 Bulbs
Stop, Flasher, Rear Fog, Reverse Bulbs
41. P21W BAW15s (SCC) Filament 43. PR21/5W Cap BAW15d Filament

25 25

17 max 47
47 17 max
15.3 max
15.3 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB385 080.000.261.430 12 21 Red  BLB567 080.000.381.430 12 21/5 Red 

42. PY21W Cap BAU15s (OSP) Filament 44. PY21W Cap BAU15s (OSP) Filament

25 25

17 max
16 17 max
16
47 47
15.3
14 max 15.3
14 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB582 080.000.386.430 12 21 BLB581 080.000.384.430 12 21 Amber 
OSR7507 080.000.094.431 12 21 OSRAM Original 
BLB581A 080.000.385.430 24 21 Amber 
OSR7510TSP 080.000.095.431 24 21 OSRAM Truckstar Pro 

17
 Bulbs
Stop, Flasher, Reverse High Level Brake Bulbs
45. W21W Cap W3x16d Filament 46. W16W Cap W2.1x9.5d Capless Filament

20.5 15.7
max
7.5

31.8
43 max

29
16
4.6 9.5
10.29
53 max 6.1
max

4.5 7.75
9.5 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB382W 080.000.257.430 12 21  BLB921 080.000.428.430 12 21
OSR7505 080.000.091.431 12 21 OSRAM Original  BLB921A 080.000.429.430 12 21 Amber 
BLB382WA 080.000.258.430 12 21 Amber  BLB921B 080.000.430.430 12 16
OSR7504 080.000.090.431 12 21 OSRAM Original  OSR921 080.000.105.431 12 16 OSRAM Original
OSR921NA 080.000.106.431 12.8 16 OSRAM Original

18
 Bulbs
Stop/Tail/Indicator Bulbs
47. Cap BAY15d Filament 49. W21/5W Cap W3x16q Filament

25 20.5
7.5

2.8 39

47 17 max
25
15.3 max 16

53
8.5

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB381 080.000.247.430 12 21/5 Level pin BLB380W 080.000.245.430 12 21/5
BLB380 080.000.241.430 12 21/5 47mm high OSP OSR7515 080.000.098.431 12 21/5 OSRAM Original
OSR7528 080.000.099.431 12 21/5 OSRAM Original
BLB380R 080.000.244.430 12 21/5 Red 
BLB380Y 080.000.246.430 12 21/5 Amber 
BLB334 080.000.227.430 24 21/5
OSR7537 080.000.100.431 24 21/5 OSRAM Original

48. P27/7W Cap W2.5x16q Filament

25.5

44
33.01
16

2.5
5

WA Ref PSH V W Notes

BLB3157 080.000.218.430 12 27/7 PCB
OSR3157 080.000.015.431 12 27/7 OSRAM Original

19
 Bulbs
Fog/Tail Bulbs Side/Tail/Marker Bulbs
50. P21/4W Cap BAZ15d Filament 51. T4W Cap BA9s (MCC) Filament

25
8.5

11

47 26 9.2
17 max

15.3 max
19.25

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB566 080.000.379.430 12 21/4 BLB233 080.000.154.430 12 4
BLB566A 080.000.380.430 24 21/4 OSR3893 080.000.018.431 12 4 OSRAM Original
BLB249 080.000.174.430 24 4
OSR3930 080.000.019.431 24 4 OSRAM Original
OSR3930TSP 080.000.020.431 24 4 OSRAM Truckstar Pro

52. Cap BA15d (SBC) Filament

18

35 17 max

15.3 max

WA Ref PSH V W Notes

BLB209 080.000.144.430 12 5
BLB245D 080.000.167.430 12 10
BLB150 080.000.134.430 24 5
BLB246D 080.000.170.430 24 10

20
 Bulbs
Side/Tail/Marker Bulbs Miniature Halogens
53. Cap BA15s (SCC) Filament 55. Cap BA9s (MCC) Filament

18 9

11
30
35 17 max 9.2
15.3 max

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB207 080.000.141.430 12 5 BLB433A 080.000.290.430 12 5
OSR5007 080.000.021.431 12 5 OSRAM Original BLB433B 080.000.291.430 12 10
BLB245 080.000.166.430 12 10 BLB433 080.000.289.430 12 20
BLB149 080.000.131.430 24 5
OSR5627 080.000.023.431 24 5 OSRAM Original
OSR5627TSP 080.000.024.431 24 5 OSRAM Truckstar Pro
BLB246 080.000.169.430 24 10
BLB874 080.000.409.430 28 7

54. Wedge Base W2.1x9.5d Filament 56. H21W Cap BAY9s (OSP) Filament

10 9

20.7 11
26.8 40
9.2
9.5
10.29

7.75

WA Ref PSH V W Notes

WA Ref PSH V W Notes
BLB297 080.000.214.430 12 2
BLB433D 080.000.293.430 12 21
BLB504 080.000.365.430 12 3
BLB433E 080.000.294.430 24 21
BLB501 080.000.360.430 12 5
OSR2825 080.000.009.431 12 5 OSRAM Original
BLB501A 080.000.361.430 12 5 Amber 
BLB505 080.000.366.430 24 3
BLB507 080.000.367.430 24 5
OSR2845 080.000.014.431 24 5 OSRAM Original

21
 Bulbs
Miniature Halogens Wedge Base Panel Bulbs
57. H6W Cap BAX9s (MCC) (OSP) Filament 59. Wedge Base W2x4.6d Filament

9
5

11

9.2 14.5
31 20 4.6

7.15

WA Ref PSH V W Notes

BLB433C 080.000.292.430 12 6
OSR64132 080.000.034.431 12 6 OSRAM Original

BLB286A BLB508A BLB286B BLB508B

BLB286G BLB508G BLB286R BLB508R

58. Cap G4 Filament
9
max WA Ref PSH V W Notes
BLB286 080.000.203.430 12 1.2
BLB286A 080.000.204.430 12 1.2 Amber 
BLB286B 080.000.205.430 12 1.2 Blue 
BLB286G 080.000.206.430 12 1.2 Green 
31 BLB286R 080.000.207.430 12 1.2 Red 
max BLB508 080.000.368.430 24 1.2
19.5 ± 0.6
BLB508A 080.000.369.430 24 1.2 Amber 
8 ± 0.5
BLB508B 080.000.370.430 24 1.2 Blue 
4
BLB508G 080.000.371.430 24 1.2 Green 
BLB508R 080.000.372.430 24 1.2 Red 

WA Ref PSH V W Notes

BLB434 080.000.296.430 12 10
BLB434A 080.000.297.430 12 20
BLB434F 080.000.301.430 24 10
BLB434G 080.000.302.430 24 20

22
 Bulbs
Panel and Indicator Bulbs
60. Cap BA7s (two lug) Filament 62. Cap BA9s (MCC) Filament

6.9 11

8.85 11

7.05 9.2
21 23.5

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB281 080.000.199.430 12 2 BLB643 080.000.389.430 12 2.2
BLB283 080.000.201.430 24 3

61. Cap BA9s (MCC) Filament 63. Cap E10/13 (MES) Filament

11
8.8
11

9.2 9.4
23
18
13.8

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB288 080.000.209.430 12 2 BLB987 080.000.435.430 12 2.2
BLB289 080.000.210.430 24 2 BLB650 080.000.390.430 24 2.8

23
 Bulbs
Panel and Indicator Bulbs Indicator Bulbs
64. Cap T4.2 (with tails) Filament 65. PCY16W Cap PU20d/2 Filament

4.2

11.7

WA Ref PSH V W Notes

BLB514 080.000.375.430 12 1.1 25mm tails

WA Ref PSH V W Notes

PHL12271 080.000.114.432 12 16 PHILIPS HiPerVision

66. PWY24W Cap WP3.3x14.5/4 Filament

WA Ref PSH V W Notes

PHL12174 080.000.110.432 12 24 PHILIPS HiPerVision

24
 Bulbs
Festoon
67. C5W Cap S7d Filament 69. C5W Cap S6d Filament

6.6
8

26 36
6
7

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB261 080.000.182.430 12 5 BLB256A 080.000.177.430 12 3

68. C5W Cap S7d Filament 70. C5W Cap S7d Filament

8 8

30 38
7 7

WA Ref PSH V W Notes WA Ref PSH V W Notes

BLB257 080.000.179.430 12 3 BLB256 080.000.176.430 12 3
BLB256C 080.000.178.430 24 3 BLB256B ??? 24 3

25
 Bulbs
Festoon
71. C5W Cap SV8.5-8 Filament 73. C5W Cap SV8.5-8 Filament

11
11

43
30 8.5 8.5

WA Ref PSH V W Notes

WA Ref PSH V W Notes
BLB269 080.000.187.430 12 10
BLB239A 080.000.158.430 12 5
BLB269A 080.000.188.430 24 10
OSR6413 080.000.053.431 12 5 OSRAM Original
BLB265 080.000.191.430 12 10
OSR6411 080.000.162.430 12 10 OSRAM Original
BLB260 080.000.081.431 24 5
BLB274 080.000.391.430 24 10

72. C5W Cap SV8.5-8 Filament 74. C5W Cap SV8.5-8 Filament

11 15

38 43
8.5 8.5

WA Ref PSH V W Notes

WA Ref PSH V W Notes
BLB265A 080.000.184.430 12 10
BLB239 080.000.158.430 12 5
BLB270 080.000.190.430 12 18
OSR6418 080.000.053.431 12 5 OSRAM Original
BLB273 080.000.192.430 12 21
BLB272 080.000.191.430 12 10
BLB276 080.000.196.430 24 15
BLB242 080.000.162.430 24 5
BLB275 080.000.195.430 24 21
OSR6423 080.000.081.431 24 5 OSRAM Original
BLB653 080.000.391.430 24 6
BLB274A 080.000.194.430 24 10

26
 Bulbs
Bus Bulbs PCB Bulbs
75. Cap BA21d (OSP) Filament 77. Cap BX8.3d Filament

41

PCB286TF PCB286T8W PCB508TV

60

WA Ref PSH V W Size (mm) Base Colour

WA Ref PSH V W Notes
PCB286TF 080.000.529.430 12 1.2 2.00 Grey
BLB217 080.000.151.430 12 45/40 3-pin
PCB286T8W 080.000.527.430 12 2.0 2.00 White
PCB508TV 080.000.550.430 24 1.2 2.00 Grey

76. Cap B22d (BC) Filament 78. Cap B8.5d Filament

38

53 PCB286T PCB286TB PCB508T

1.6
20

8 12.5

WA Ref PSH V W Notes

BLB809 080.000.402.430 12 24 Pearl WA Ref PSH V W Size (mm) Base Colour
BLB816 080.000.404.430 24 12 Pearl PCB286T 080.000.525.430 12 1.2 2.00 Black
BLB821 080.000.405.430 24 20 Pearl PCB286TB 080.000.528.430 12 1.5 2.00 Beige
PCB508T 080.000.548.430 24 1.2 2.00 Grey

27
 Bulbs
PCB Bulbs
79. Cap BG8.5-5.5d Filament 81. Cap B12d Filament

44
22

PCB512PCBX
14

4.8

34 16

WA Ref PSH V W Size (mm) Base Colour WA Ref PSH V W Size (mm) Base Colour
PCB286TFT 080.000.530.430 12 1.2 1.50 Black PCB512PCBX 080.000.554.430 12 2.0 2.00 White

80. Cap B8.5 S40 Filament 82. Cap SG8.5 5.5d Filament

PCB286TSL PCB286THZ

4.8
4.8

45
37.8

WA Ref PSH V W Size (mm) Base Colour WA Ref PSH V W Size (mm) Base Colour
PCB286TSL 080.000.540.430 12 1.2 1.50 Black PCB286THZ 080.000.533.430 12 1.2 1.50 Black

28
 Bulbs
Osram Original Halogen Headlight Bulbs
OSRAM ORIGINAL LINE halogen lamps offer convincing performance for standard requirements,
are robust and cost effective. They have already been successfully used in millions of new cars from
renowned manufacturers, whether as standard initial equipment or original spare parts.

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR64150 BLB448 080.000.037.431 12V 55W H1 P14.5s 1 Box
OSR64173 BLB479 080.000.049.431 12V 55W H2 X511 1 Box
OSR64151 BLB453 080.000.042.431 12V 55W H3 PK22s 1 Box
OSR64193 BLB472 080.000.054.431 12V 60/55W H4 P43t 1 Box
OSR64210 BLB499 080.000.063.431 12V 55W H7 PX26d 1 Box
OSR64212 BLBH08 080.000.073.431 12V 35W H8 PGJ19-1 1 Box
OSR64213 BLBH09 080.000.075.431 12V 65W H9 PGJ19-5 1 Box
OSR64243 - 080.000.082.431 12V 65W H9B PGJY19-5 1 Box
OSR64211 BLBH11 080.000.070.431 12V 55W H11 PGJ19-2 1 Box
OSR64178 - 080.000.052.431 12V 60/55W H13 P26.4t 1 Box
OSR64176 - 080.000.050.431 12V 55/15W H15 PGJ23t-1 1 Box
OSR64219 - 080.000.080.431 12V 19W H16 PGJ19-3 1 Box
OSR9005 BLB9005 080.000.101.431 12V 60W HB3 P20d 1 Box
OSR9012 - 080.000.104.431 12V 55W HIR2 PX22d 1 Box
OSR64155 BLB466 080.000.044.431 24V 70W H1 P14.5s 1 Box
OSR64156 BLB460 080.000.047.431 24V 70W H3 PK22s 1 Box
OSR64196 BLB475 080.000.061.431 24V 75/70W H4 P43t 1 Box
OSR64215 BLB499A 080.000.076.431 24V 70W H7 PX26d 1 Box
OSR64177 - 080.000.051.431 24V 60/20W H15 PGJ23t-1 1 Box

Osram Night Breaker Laser

The most powerful halogen light from OSRAM
Discover the next generation of NIGHT BREAKER LASER - the brightest halogen automotive light
from OSRAM! Using an innovative laser ablation technology these headlight lamps shine up to 150%
brighter compared to the minimum legal standard. The highly engineered filament ensures an extra
light output. Thus, the lamps provide an up to 150 metre long beam and up to 20% whiter light
compared to the minimum legal standard. More light and improved visibility can help drivers identify
and react to traffic hazards more quickly.

Up to 150% more brightness Up to 20% whiter light Up to 150m long beam

To see further and therefore react sooner Compared to the minimum legal standard For better visibility
compared to the minimum legal standard. (modern look)

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR64150NL-HCB BLB448 080.000.041.431 12V 55W H1 P14.5s 2 Hard Cover Box
OSR64151NL-HCB BLB453 080.000.043.431 12V 55W H3 PK22s 2 Hard Cover Box
OSR64193NL-HCB BLB472 080.000.058.431 12V 60/55W H4 P43t 2 Hard Cover Box
OSR64210NL-HCB BLB499 080.000.068.431 12V 55W H7 PX26d 2 Hard Cover Box
OSR64212NL-HCB BLBH08 080.000.074.431 12V 35W H8 PGJ19-1 2 Hard Cover Box
OSR64211NL-HCB BLBH11 080.000.072.431 12V 55W H11 PGJ19-2 2 Hard Cover Box
OSR9005NL-HCB BLB9005 080.000.103.431 12V 60W HB3 P20d 2 Hard Cover Box

29
 Bulbs
Osram Truckstar Pro Bulbs
The most powerful halogen truck light from OSRAM
Discover TRUCKSTAR PRO signal lamps - the brightest truck light from OSRAM with excellent
value for money. With up to 100% more light than standard lamps, extremely long life and very high
vibration resistance these 24 volt lamps are ideal for professional drivers while reducing downtime
and fleet costs. Thanks to the high vibration resistance, TRUCKSTAR PRO lamps are suitable even
for heavy duty applications. Due to their impressive brightness and more than double the service life
compared to standard lamps, the lamps improve your safety while driving on the road.

Up to 100% more brightness More than double the service life Very high vibration resistance
To see further and therefore react sooner Reduced downtime and fleet costs Suitable for heavy duty applications
compared to the minimum legal standard. compared to standard lamps

TRUCKSTAR PRO HALOGEN HEADLAMPS

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR64155TSP-HCB BLB466 080.000.046.431 24V 70W H1 P14.5s 2 Hard Cover Box
OSR64156TSP-HCB BLB460 080.000.048.431 24V 70W H3 PK22s 2 Hard Cover Box
OSR64215TSP-HCB BLB499A 080.000.078.431 24V 70W H7 PX26d 2 Hard Cover Box

TRUCKSTAR PRO AUXILIARY LAMPS

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR7511TSP BLB241 080.000.097.431 24V 21W P21W BA15s 10 Box
OSR7510TSP BLB581A 080.000.095.431 24V 21W PY21W BAU15s 10 Box
OSR5637TSP BLB246 080.000.026.431 24V 10W R10W BA15s 10 Box
OSR5627TSP BLB149 080.000.024.431 24V 5W R5W BA15s 10 Box
OSR3930TSP BLB249 080.000.020.431 24V 4W T4W BA9s 10 Box

Osram Original Bulbs with Metal Bases

ORIGINAL signal lamps with metal bases feature - like all ORIGINAL products from OSRAM - a
reliable OEM quality. Due to the wide product range, the lamps can be used as original spare lamps for
different applications.

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR64132 BLB433C 080.000.034.431 12V 6W H6W BAX9s
OSR7528 BLB380 080.000.099.431 12V 21/5W P21/5W BAY15d
OSR7506 BLB382 080.000.092.431 12V 21W P21W BA15s
OSR7507 BLB581 080.000.094.431 12V 21W PY21W BAU15s
OSR5007 BLB207 080.000.021.431 12V 5W R5W BA15s
OSR3893 BLB233 080.000.018.431 12V 4W T4W BA9s
OSR3796 - 080.000.017.431 12V 2W - BA9s
OSR64138 BLB433E 080.000.036.431 24V 21W H21W BAY9s
OSR7537 BLB334 080.000.100.431 24V 21/5W P21/5W BAY15d
OSR7511 BLB241 080.000.096.431 24V 21W P21W BA15s
OSR5637 BLB246 080.000.025.431 24V 10W R10W BA15s
OSR5627 BLB149 080.000.023.431 24V 5W R5W BA15s
OSR3930 BLB249 080.000.019.431 24V 4W T4W BA9s

30
 Bulbs
Osram Original Bulbs with Glass Bases
The ORIGINAL signal lamps with glass wedge bases are available as original spare parts for different
lamp types. Discover these reliable lamps and OSRAM´s proven high quality.

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR921 BLB921B 080.000.105.431 12V 16W W16W W2.1x9.5d
OSR921NA - 080.000.106.431 12.8V 16W WY16W W2.1x9.5d
OSR7515 BLB380W 080.000.098.431 12V 21/5W W21/5W W3x16q
OSR7505 BLB382W 080.000.091.431 12V 21W W21W W3x16d
OSR2821 BLB504 080.000.008.431 12V 3W W3W W2.1x9.5d
OSR2825 BLB501 080.000.009.431 12V 5W W5W W2.1x9.5d
OSR7504 BLB382WA 080.000.090.431 12V 21W WY21W W3x16d
OSR2721 BLB286 080.000.003.431 12V 1.2W - W2x4.6d
OSR2820 BLB297 080.000.007.431 12V 2W - W2.1x9.5d
OSR2827NA BLB501A 080.000.012.431 12V 5W WY5W W2.1x9.5d
OSR2845 BLB507 080.000.014.431 24V 5W W5W W2.1x9.5d
OSR2741 BLB508 080.000.005.431 24V 1.2W - W2x4.6d
OSR2840 BLB513 080.000.013.431 24V 2W - W2.1x9.5d

Osram Xenarc Original

The original spare parts with four-year guarantee
XENARC ORIGINAL lamps impress with a wide product range and the reliable OEM quality.
Successfully used in millions of new automobiles from renowned manufacturers, whether as standard
initial equipment or original spare parts. With up to 4,500 Kelvin color temperature, their light is closer
to natural daylight than conventional halogen light with 3,200 Kelvin – and is thus more pleasant for
the eyes. Thanks to the impressive intensity of the light, the lamps provide better visibility on the road.
The durable lamps function as original spare parts of your vehicle and convince with their long lifetime.
OSRAM provides a 4-year-guarantee for XENARC ORIGINAL lamps. Please note that XENARC lamp
changes are recommended to be carried out by a professional.

WA Ref Wood Auto PSH Voltage (V) Wattage (W) ECE Cap Type Qty Packaging
OSR66140 BLBOD1S 080.000.083.431 85V 35W D1S PK32d-2
OSR66150 BLBOD1R 080.000.084.431 85V 35W D1R PK32d-3
OSR66240 BLBOD2S ??? 85V 35W D2S P32d-2
OSR66250 BLBOD2R ??? 85V 35W D2R P32d-3
OSR66340 BLBOD3S 080.000.085.431 42V 35W D3S PK32d-5
OSR66548 - 080.000.086.431 42V 25W D8S PK32d-1

31
 Bulb Holders
Bulb Holders

TER2000 TER2001 TER2002 TER2003

H4 H7 W2.1x9.5d Capless Wedge W2.1x9.5d Capless Wedge

TER2020 TER2021 TER2022 TER2023

BA15d BA15s BA9s BAY15d

TER2004 TER2005 TER2006 TER2007

2-pin 3-pin MES E10/13

WA Ref PSH Bulb Fitment Notes

TER2000 080.100.003.430 H4 3 wires with 200mm leads. Main beam/dipped/earth.
TER2001 080.100.004.430 H7 2 wires with 130mm leads.
TER2002 080.100.005.430 W2.1x9.5d Capless Wedge T10. Sidelamps and markers.
TER2003 080.100.006.430 W2.1x9.5d Capless Wedge JP connector. Sidelamps and markers.
TER2020 080.100.021.430 BA15d 2 wires with 130mm leads.
TER2021 080.100.022.430 BA15s 1 wire with 130mm lead.
TER2022 080.100.023.430 BA9s 1 wire with 130mm lead.
TER2023 080.100.024.430 BAY5d 3 wires with 130mm leads.
TER2004 080.100.007.430 Click cover for PRS connector
TER2005 080.100.008.430 2 Pin Plug/Bulb Holder for Land Rover Tail Lamps with Econoseal Socket
TER2006 080.100.009.430 3 Pin Plug/Bulb Holder for Land Rover Tail Lamps with Econoseal Socket
TER2007 080.100.010.430 MES E10/13 Lucas CAB302

32
 Bulb Holders
Ceramic Bulb Holders

TER2010 TER2011 TER2012 TER2013

H1/H3 H1/H3 H4 H4

TER2014 TER2015 TER2016 TER2017

H7 H7 H11 9004/9007

TER2018 TER2019
9005 9006

WA Ref PSH Bulb Fitment Cable Size Working Length (mm) Cable Exit
TER2010 080.100.011.430 H1/H3 14/0.30mm 130mm Straight
TER2011 080.100.012.430 H1/H3 14/0.30mm 130mm Angled
TER2012 080.100.013.430 H4 14/0.30mm 130mm Straight
TER2013 080.100.014.430 H4 14/0.30mm 130mm Angled
TER2014 080.100.015.430 H7 14/0.30mm 130mm Straight
TER2015 080.100.016.430 H7 14/0.30mm 130mm Angled
TER2016 080.100.017.430 H11 14/0.30mm 130mm Straight
TER2017 080.100.018.430 9004/9007 14/0.30mm 130mm Straight
TER2018 080.100.019.430 9005 14/0.30mm 130mm Straight
TER2019 080.100.020.430 9006 14/0.30mm 130mm Straight

33
 Beacons
209-Series LED Beacons
N ECE
R10

Multi Voltage (9-30V) Polycarbonate lens and housing.

60 LEDs IP65 rating.
Available in amber and green lens. R10 approval.

BEA1390 BEA1391 BEA1393 BEA1394

Amber · 1 bolt Amber · 3 bolt Amber · Magnetic Amber · Flexi DIN

BEA1390G BEA1391G BEA1393G BEA1394G

Green · 1 bolt Green · 3 bolt Green · Magnetic Green · Flexi DIN

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

Ø x H mm
BEA1390 080.300.079.430 9-30V 3 patterns Amber  Ø127 x 196mm 1 bolt R10
BEA1391 ??? 9-30V 3 patterns Amber  Ø140 x 175mm 3 bolt R10
BEA1393 ??? 9-30V 3 patterns Amber  Ø127 x 171mm Magnetic R10
BEA1394 080.300.083.430 9-30V 3 patterns Amber  Ø127 x 241mm Flexi DIN R10
BEA1390G 080.300.079.430 9-30V 3 patterns Green  Ø127 x 196mm 1 bolt R10
BEA1391G ??? 9-30V 3 patterns Green  Ø140 x 175mm 3 bolt R10
BEA1393G ??? 9-30V 3 patterns Green  Ø127 x 171mm Magnetic R10
BEA1394G 080.300.084.430 9-30V 3 patterns Green  Ø127 x 241mm Flexi DIN R10

34
 Beacons
210-Series LED Beacons
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and housing.

16 LEDs IP67 rating.
Available in amber lens. R10 and R65 approval.

BEA1370 BEA1371 BEA1372 BEA1374

Amber · 1 bolt Amber · 3 bolt Amber · Magnetic Amber · Flexi DIN

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

Ø x H mm
BEA1370 ??? 9-30V 4 patterns Amber  Ø130 x 150mm 1 bolt R10, R65
BEA1371 ??? 9-30V 4 patterns Amber  Ø154 x 144mm 3 bolt R10, R65
BEA1372 ??? 9-30V 4 patterns Amber  Ø154 x 158mm Magnetic R10, R65
BEA1374 ??? 9-30V 4 patterns Amber  Ø130 x 235mm Flexi DIN R10, R65

35
 Beacons
231-Series LED Beacons
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

18 LEDs IP67 rating.
Available in amber and green lens. R10 and R65 approval (amber only).

BEA1395 BEA1398 BEA1396 BEA1397

Amber · 1 bolt Amber · 3 bolt Amber · Magnetic Amber · Flexi DIN

BEA1395G BEA1398G BEA1396G BEA1397G

Green · 1 bolt Green · 3 bolt Green · Magnetic Green · Flexi DIN

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

Ø x H mm
BEA1390 080.300.079.430 9-30V 3 patterns Amber  Ø127 x 196mm 1 bolt R10
BEA1391 ??? 9-30V 3 patterns Amber  Ø140 x 175mm 3 bolt R10
BEA1393 ??? 9-30V 3 patterns Amber  Ø127 x 171mm Magnetic R10
BEA1394 080.300.083.430 9-30V 3 patterns Amber  Ø127 x 241mm Flexi DIN R10
BEA1390G 080.300.079.430 9-30V 3 patterns Green  Ø127 x 196mm 1 bolt R10
BEA1391G ??? 9-30V 3 patterns Green  Ø140 x 175mm 3 bolt R10
BEA1393G ??? 9-30V 3 patterns Green  Ø127 x 171mm Magnetic R10
BEA1394G 080.300.084.430 9-30V 3 patterns Green  Ø127 x 241mm Flexi DIN R10

36
 Beacons
241-Series LED Beacon
N ECE
R10

Multi Voltage (10-110V) Polycarbonate lens and housing.

20 LEDs IP67 rating.
Available in amber lens. R10 approval.

BEA1375
Amber · 1 bolt

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

Ø x H mm
BEA1375 ??? 10-110V 1 pattern Amber  Ø79 x 55mm 1 bolt R10

280-Series LED Beacon

N ECE
R10

Multi Voltage (10-110V) Polycarbonate lens and housing.

30 LEDs IP65 rating.
Available in amber lens. R10 approval.

BEA1376
Amber · 2 bolt

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

Ø x H mm
BEA1376 ??? 10-110V 1 pattern Amber  Ø100 x 130mm 2 bolts R10

37
 Light Bars
112-Series LED Mini Light Bars
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and housing.

72 LEDs IP65 rating.
Amber LEDs with clear lens. R10 and R65 approval.
Sync wire, cable loom, and switch included.

BEA1480 BEA1482
Amber · 1 bolt Amber · Magnetic

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

L x W x Hmm
BEA1480 ??? 9-30V 8 patterns Amber  310 x 159 x 75mm 1 bolt R10, R65
BEA1482 ??? 9-30V 8 patterns Amber  310 x 159 x 75mm Magnetic R10, R65

139-Series LED Mini Light Bars

N ECE
R10
ECE
R65

Dual Voltage (12/24V) Polycarbonate lens and housing.

72 LEDs IP67 rating.
Amber LEDs with clear lens. R10 and R65 approval.
Black polycarbonate lid.

BEA1520 BEA1521
Amber · 1 bolt Amber · Magnetic

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

L x W x Hmm
BEA1520 080.900.030.430 12/24V 26 patterns Amber  363 x 171 x 37mm 1 bolt R10, R65
BEA1521 ??? 12/24V 26 patterns Amber  363 x 171 x 59mm Magnetic R10, R65

38
 Light Bars
156-Series LED Mini Light Bar
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and housing.

200 LEDs IP67 rating.
Amber LEDs with clear lens. R10 and R65 approval.

BEA1455
Amber · 4 bolt

WA Ref PSH Voltage Action Colours Dimensions Mounting Approvals

L x W x Hmm
BEA1455 080.900.024.430 9-30V 26 patterns Amber  585 x 295 x 100mm 4 bolts R10, R65

770-Series LED Light Bars

N ECE
R10
ECE
R65

Dual Voltage (12/24V) Polycarbonate lens and housing.

200 LEDs IP67 rating.
Amber LEDs with clear lens. ECE R10, R65 Class1/2 and CAP168 approval.

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
VSWD-771-A ??? 12/24V 108 27 patterns Amber  600 x 100 x 45mm Bracket R10, R65
BEA1457 ??? 12/24V 156 27 patterns Amber  900 x 100 x 45mm Bracket R10, R65
BEA1459 080.900.018.600 12/24V 204 27 patterns Amber  1200 x 100 x 45mm Bracket R10, R65
VSWD-775-A ??? 12/24V 252 27 patterns Amber  1500 x 100 x 45mm Bracket R10, R65

39
 Beacon Accessories
Beacon DIN Mounts

BEA2010 BEA2011 BEA2012 BEA2013 BEA2019

Singular Vertical Horizontal Side Twin DIN

WA Ref PSH Mount Placement Mount Type

BEA2010 080.300.092.430 Singular Bolt
BEA2011 080.300.093.430 Vertical Bracket
BEA2012 080.300.094.430 Horizontal Bracket
BEA2013 080.300.095.430 Side Bracket
BEA2019 080.300.096.430 Twin DIN Bracket

Mini Light Bar Riser Bracket 

N

BEA2020
Minibar Riser Bracket
240 x 100 x 100mm

WA Ref PSH Description Dimensions

BEA2020 ??? Minibar riser bracket 240 x 100 x 100mm

40
 Warning Lights
707-Series LED Warning Lights
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

3/4/6 LEDs IP67 rating.
Coloured LEDs with clear lens. R10 and R65 approval (amber).
With sync wire. Bolt or self-adhesive mounting.

LAM1930
3 LEDs · 82mm

LAM1930
4 LEDs · 98mm

LAM1930
6 LEDs · 131mm

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
LAM1930 ??? 9-30V 3 26 patterns Amber  82 x 31 x 6.6mm Bolt/adhesive R10, R65
LAM1930R ??? 9-30V 3 26 patterns Red  82 x 31 x 6.6mm Bolt/adhesive R10
LAM1930W ??? 9-30V 3 26 patterns White  82 x 31 x 6.6mm Bolt/adhesive R10
LAM1940 ??? 9-30V 4 26 patterns Amber  98 x 31 x 6.6mm Bolt/adhesive R10, R65
LAM1940R ??? 9-30V 4 26 patterns Red  98 x 31 x 6.6mm Bolt/adhesive R10
LAM1940W ??? 9-30V 4 26 patterns White  98 x 31 x 6.6mm Bolt/adhesive R10
LAM1960 081.500.110.430 9-30V 6 26 patterns Amber  131 x 31 x 6.6mm Bolt/adhesive R10, R65
LAM1960R ??? 9-30V 6 26 patterns Red  131 x 31 x 6.6mm Bolt/adhesive R10
LAM1960W 081.500.111.430 9-30V 6 26 patterns White  131 x 31 x 6.6mm Bolt/adhesive R10

41
 Warning Lights
708-Series LED Warning Lights
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

3/4/6 LEDs IP67 rating.
Coloured LEDs with clear lens. R10 and R65 approval (amber).
With sync wire.

LAM1895
3 LEDs · 76mm

LAM1896
4 LEDs · 96mm

LAM1897
6 LEDs · 120mm

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
LAM1895 081.500.086.430 9-30V 3 26 patterns Amber  76 x 29 x 8.8mm Bolt R10, R65
LAM1895R ??? 9-30V 3 26 patterns Red  76 x 29 x 8.8mm Bolt R10
LAM1895W ??? 9-30V 3 26 patterns White  76 x 29 x 8.8mm Bolt R10
LAM1896 081.500.087.430 9-30V 4 26 patterns Amber  96 x 29 x 8.8mm Bolt R10, R65
LAM1896R ??? 9-30V 4 26 patterns Red  96 x 29 x 8.8mm Bolt R10
LAM1896W ??? 9-30V 4 26 patterns White  96 x 29 x 8.8mm Bolt R10
LAM1897 081.500.088.430 9-30V 6 26 patterns Amber  120 x 29 x 8.8mm Bolt R10, R65
LAM1897R ??? 9-30V 6 26 patterns Red  120 x 29 x 8.8mm Bolt R10
LAM1897W ??? 9-30V 6 26 patterns White  120 x 29 x 8.8mm Bolt R10

42
 Warning Lights
709-Series LED Warning Lights
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

6/12 LEDs IP69k rating.
Coloured LEDs with clear lens. R10 and R65 approval (amber).
With sync wire. SAE J595 approval (amber).

LAM1901
6 LEDs · 113mm

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
LAM1901 081.500.089.430 9-30V 6 26 patterns Amber  113 x 29 x 10mm Bolt R10, R65
LAM1901R ??? 9-30V 6 26 patterns Red  113 x 29 x 10mm Bolt R10
LAM1901W ??? 9-30V 6 26 patterns White  113 x 29 x 10mm Bolt R10

706-Series LED Marker and Warning Lights

N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

6/12 LEDs IP67 rating.
Combined marker and amber warning light. R10, R65 XAI, and R148 approval.
With sync wire.

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
LAM1915 ??? 9-30V 6+18 21 patterns Amber/Red  132 x 51 x 19mm Bolt R10, R65, R148
LAM1916 ??? 9-30V 6+18 21 patterns Amber/Amber  132 x 51 x 19mm Bolt R10, R65, R148
LAM1917 ??? 9-30V 6+18 21 patterns Amber/White  132 x 51 x 19mm Bolt R10, R65, R148

43
 Warning Lights
4H75-Series LED Warning Light 
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

4 LEDs IP67 rating.
Amber LEDs with clear lens. R10 and R65 approval.
With sync wire.

LAM1918
Amber · 1 bolt

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

H x W x Dmm
LAM1918 ??? 9-30V 4 26 patterns Amber  74 x 74 x 32mm Bolt / Bracket R10, R65

C704-Series LED Curved Warning Light

N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and housing.

4 LEDs IP67 rating.
Amber LEDs with clear lens. R10 and R65 approval.
With sync wire.

LAM1919
Amber · Curved

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
LAM1919 ??? 9-30V 12 26 patterns Amber  170 x 80 x 30mm Bolt / Bracket R10, R65

44
 Warning Lights
HL300-Series LED Warning Lights
N ECE
R10
ECE
R65

Multi Voltage (9-30V) Polycarbonate lens and aluminium housing.

4 LEDs IP69k rating.
Amber LEDs with clear lens. R10 and R65 approval (amber).
With sync wire.

LAM1919
Amber

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

L x W x Hmm
LAM1919 ??? 9-30V 4 21 patterns Amber  54 x 37 x 17mm Screws R10, R65
VSWD-HL300-R ??? 9-30V 4 21 patterns Red  54 x 37 x 17mm Screws R10, R65
VSWD-HL300-W ??? 9-30V 4 21 patterns White  54 x 37 x 17mm Screws R10, R65

HIL308-Series LED Warning Lights

N ECE
R10
ECE
R65

Dual Voltage (12/24V) Polycarbonate lens and aluminium housing.

4 LEDs IP67 rating.
Coloured LEDs with clear lens. R10 and R65 approval (amber)
With sync wire.

LAM1921
Amber

WA Ref PSH Voltage LEDs Action Colours Dimensions Mounting Approvals

Ø x D x Hmm
LAM1921 ??? 12/24V 4 21 patterns Amber  Ø27 x 39 x 24mm Bracket R10, R65
VSWD-HIL308-R ??? 12/24V 4 21 patterns Red  Ø27 x 39 x 24mm Bracket R10
VSWD-HIL308-W ??? 12/24V 4 21 patterns White  Ø27 x 39 x 24mm Bracket R10

45
 Marker Lamps
25mm LED Button Markers
Available in both 12V and 24V versions. 24.41 x 27.27 x 9.27mm
3 LEDs. Cut-out 20mm
Waterproof with fixed grommet. Flange diameter 28mm

LAM9580 (12V) LAM9581 (12V) LAM9582 (12V)

LAM9585 (24V) LAM9586 (24V) LAM9587 (24V)
Amber Red White

WA Ref PSH Voltage Colour Notes

LAM9580 081.100.140.430 12V Amber ECE approved
LAM9585 081.100.144.430 24V Amber ECE approved
LAM9581 081.100.142.430 12V Red
LAM9586 081.100.145.430 24V Red
LAM9582 ??? 12V White ECE approved
LAM9587 081.100.146.430 24V White ECE approved

28mm 181-Series Round Markers

Dual Voltage (12/24V) and 12V only versions Fully waterproof.
28mm diameter with 200mm cable Cut out size: 20mm
ECE approved.

LED181AME LED181RME LED181WME LED181GME

12/24V · Amber 12/24V · Red 12/24V · White 12/24V · Green

WA Ref PSH Voltage (V) Colour Notes

LED181AME 081.100.029.435 12/24V Amber Side marker
LED181RME 081.100.032.435 12/24V Red Rear marker
LED181WME 081.100.033.435 12/24V White Front marker
LED181GME 081.100.031.435 12/24V Green ABS marker

46
 Marker Lamps
58mm 35-Series Markers
Dimensions (W x H x D mm): 58 x 35 x 19mm Outline markers.
Mounting points: 28.5mm Dual voltage (12/24V).
Sealed electronics. 4 LEDs.
40cm hardwired cable. ECE approved.

LED35RME LED35AME LED35WME LED35GME

Black · Red Black · Amber Black · White Black · Green

WA Ref PSH Voltage (V) Colour Base Colour

LED35RME 081.100.036.435 12/24V Red Black
LED35AME 081.100.034.435 12/24V Amber Black
LED35WME 081.100.037.435 12/24V Clear Black
LED35GME 081.100.035.435 12/24V Green Black

58mm 58-Series Markers

Dimensions (W x H x D mm): 58 x 35 x 19mm Outline markers.
Mounting points: 28.5mm Dual voltage (12/24V).
Sealed electronics. 2 LEDs. ECE and EMC approved.
40cm hardwired cable.

LED58RME LED58AME LED58WME LED58GME

Black · Red Black · Amber · Cat5 Black · White Black · Green

WA Ref PSH Voltage (V) Description Base Colour

LED58RME 081.100.046.435 12/24V Rear Outline Marker, Red Black
LED58WME 081.100.047.435 12/24V Front Outline Marker, Clear Black
LED58GME ??? 12/24V ABS Marker, Green Black
LED58AME 081.100.045.435 12/24V Category 5 Side Indicator Lamp, Amber * Black
* Suitable for M2-M3, N1 class vehicles less than 6m and all M1 vehicles.

47
 Marker Lamps
65mm LED Markers
Dual Voltage (12/24V) Dimensions (W x H x D mm): 65 x 27 x 19mm
For off-road use only. Not ECE approved.

LAM9570 LAM9571 LAM9572

Amber Red Clear lens · White

LAM9573 LAM9574
Blue Green

WA Ref PSH Voltage Colour

LAM9570 081.100.049.435 12/24V Amber
LAM9571 081.100.055.435 12/24V Red
LAM9572 081.100.057.435 12/24V White
LAM9573 081.100.051.435 12/24V Blue
LAM9574 081.100.133.430 12/24V Green

7922-Series Marker Lamps

Dual voltage (12/24V) Recess mounted marker lamp
Fully waterproof to IP67. Dimensions (W x H x D mm): 79 x 22 x 18mm
Screw mounted - fixings and gasket included. Cut out size: 45 x 17mm
Cable length: 20cm Fixing centres: 58mm
ECE approved. Bezel thickness: 3mm

LED7922AMB LED7922RMB LED7922WMB

LED7922AM2 LED7922RM2 LED7922WM2
Amber Red White

LED7922GMB LED7922BMB
LED7922GM2 LED7922BM2
Green Blue

WA Ref PSH Voltage (V) Colour Pack WA Ref PSH Voltage (V) Colour Pack
LED7922AMB 081.100.049.435 12/24V Amber Single LED7922AM2 081.100.048.435 12/24V Amber Twin
LED7922RMB 081.100.055.435 12/24V Red Single LED7922RM2 081.100.054.435 12/24V Red Twin
LED7922WMB 081.100.057.435 12/24V White Single LED7922WM2 081.100.056.435 12/24V White Twin
LED7922GMB 081.100.053.435 12/24V Green Single LED7922GM2 081.100.052.435 12/24V Green Twin
LED7922BMB 081.100.051.435 12/24V Blue Single LED7922BM2 081.100.050.435 12/24V Blue Twin

48
 Marker Lamps
83mm LED Markers
Frequently fitted to chrome spotlight bars fitted to trucks and vans.
Multivoltage (12-32V) Clear lens.
Dimensions (W x H x D mm): 82 x 26 x 20mm Mounting centres: 57.6mm
IP67 ingress protection. ECE approved.

LAM9610 LAM9612 LAM9613

Amber White Blue

WA Ref PSH Voltage Colour

LAM9610 081.100.049.435 12-32V Amber
LAM9612 081.100.057.435 12-32V White
LAM9613 081.100.051.435 12-32V Blue

49
Marker Lamps
100mm 44-Series Low Profile Markers
Dimensions (W x H x D mm): 100 x 44 x 12mm Outline Markers.
Mounting points: 84mm Dual voltage (12/24V).
Sealed electronics. 3 LEDs. Reflex reflector in the assembly.
50cm hardwired cable. Available in black and white base colours.
ECE approved.

LED44AME LED44RME LED44WME

Black · Amber Black · Red Black · White

LED44WAME LED44BKT
White · Amber Black · Mounting Bracket

WA Ref PSH Voltage (V) Description Base Colour

LED44AME 081.100.039.435 12/24V Side Marker Black
LED44RME 081.100.042.435 12/24V Rear End Outline Marker Black
LED44WME 081.100.044.435 12/24V Front End Outline Marker Black
LED44WAME 081.100.043.435 12/24V Side Marker White
LED44BKT 081.100.041.435 - Mounting bracket for 44-series Black

50
 Marker Lamps
110mm Markers with Reflex Reflector BULB LED

Dimensions (W x H x D mm): 110 x 91 x 46mm Supplied with mounting bracket.

Available in 24V LED version or bulb version. ECE approved.

LAM9565 LAM9566 TER2003

24V LED 12/24V Bulb (not supplied)

WA Ref PSH Voltage Description

LAM9565 081.100.130.430 24V 3 LED amber side marker with 2 male-pin JP connector
LAM9566 081.100.131.430 12/24V Supplied without bulb (W5W). 12V bulb use BLB501. 24V bulb use BLB507.
TER2003 080.100.006.430 - Replacement bulb holder for LAM9566. W2.1x9.5d with male JP connector

110mm 1490-Series Markers

Dimensions (W x H x D mm): 110 x 40 x 25mm Marker Lamp
Mounting points: 28.5mm Dual voltage (12/24V)
Sealed electronics. 20cm hardwired cable.
ECE approved.

LED1490RM LED1490AM LED1490WM

Red Amber White

WA Ref PSH Voltage (V) Colour Description Base Colour

LED1490RM 081.100.024.435 12/24V Red Rear Outline Marker Black
LED1490AM 081.100.023.435 12/24V Amber Side Outline Marker Black
LED1490WM 081.100.025.435 12/24V White Front Outline Marker Black

51
 Marker Lamps
110mm 1491-Series Markers
Dimensions (W x H x D mm): 110 x 65 x 25mm Marker lamp with bracket
Bracket width: 22mm Dual voltage (12/24V)
Sealed electronics. 20cm hardwired cable.
ECE approved.

LED1491RM LED1491AM LED1491WM

Red Amber White

WA Ref PSH Voltage (V) Colour Description Base Colour

LED1491RM 081.100.027.435 12/24V Red Rear Outline Marker Black
LED1491AM 081.100.026.435 12/24V Amber Side Outline Marker Black
LED1491WM 081.100.028.435 12/24V White Front Outline Marker Black

111mm LED Markers with Reflex Reflector

A range of 12/24V 5 LED side markers. Dimensions (W x H x D mm): 111 x 75 x 23.9mm
Variety of cable lengths. ECE approved.
Supplied with mounting bracket.

LAM9550MV LAM9553MV LAM9558MV

Amber Red White

WA Ref PSH Voltage (V) Colour Description Base Colour

LAM9550MV 081.100.122.430 12/24V Amber Side Outline Marker Black
LAM9553MV 081.100.124.430 12/24V Red Rear Outline Marker Black
LAM9558MV 081.100.127.430 12/24V White Front Outline Marker Black

52
 Marker Lamps
120mm LED Markers with Reflex Reflector
12V/24V LED marker lamps with reflex reflector Dimensions (W x H x D mm): 120 x 45 x 28mm
300mm lead with stripped ends Mounting hole distance: 75mm Reflector depth: 7.5mm
ECE approved.

LAM1300 LAM1302
Amber Red

WA Ref PSH Voltage Colour Description

LAM1300 081.100.111.430 12/24V Amber Side marker with reflex reflector
LAM1302 081.100.113.430 12/24V Red Rear marker with reflex reflector

126mm 129-Series Markers

Dual voltage (12/24V) Fully waterproof.
With reflex reflector. Dimensions (W x H x D mm): 126 x 30 x 12mm
ECE approved.

LED129AM LED129RM LED129WM

Amber Red White

LED129BKT

WA Ref PSH Voltage (V) Colour Description Base Colour

LED129AM 081.100.018.435 12/24V Amber Side Outline Marker Black
LED129RM 081.100.020.435 12/24V Red Rear Outline Marker Black
LED129WM 081.100.021.435 12/24V White Front Outline Marker Black
LED129BKT 081.100.019.435 12/24V - Mounting Bracket Black

53
 Marker Lamps
Rubber LED Stalk Markers with Indicator
24V 9 LED rubber stalk marker lamps (red/white) Horizontal projection: 144.6mm
With amber side marker. Vertical projection: 130.5mm
Supplied with 500mm cable with PRS connector. ECE approved.

LAM9544 LAM9545 TER2004

Left hand Right hand

WA Ref PSH Voltage (V) Description

LAM9544 081.100.018.435 24V Left hand rubber stalk marker lamp with indicator
LAM9545 081.100.020.435 24V Right hand rubber stalk marker lamp with indicator
TER2004 081.100.021.435 - Click cover for PRS connector

Stalk Markers
Overall size: 193 x 166 x 66mm Stalk Marker Lamp.
Stalk Angle: 60° from fitting surface Dual voltage (12/24V).
Base size: 95 x 50mm 40cm hardwired cable.
Sealed electronics. ECE approved.

LED1004RE LED1004LE LED1005RE LED1005LE

Right hand Left hand Right hand with indicator Left hand with indicator

WA Ref PSH Voltage (V) Description Base Colour

LED1004RE 081.100.013.435 12/24V Right hand stalk lamp Black
LED1004LE 081.100.012.435 12/24V Left hand stalk lamp Black
LED1005RE 081.100.016.435 12/24V Right hand stalk lamp with indicator Black
LED1005LE 081.100.015.435 12/24V Left hand stalk lamp with indicator Black

54
 Marker Lamps
M840 LED Stalk Markers
Horizontal mount LED stalk lamps. Dual voltage (12/24V)
Overall size (W x H x D mm): 147 x 148 x 40mm Base size (W x D mm): 100 x 40mm
With amber indicator. ECE approved.

RUB840/01/04 RUB840/01/04
Right hand Left hand

WA Ref PSH Voltage (V) Side Connector Notes

RUB840/01/04 081.100.076.600 12/24V Right Hand CE
RUB840/01/05 081.100.077.600 12/24V Left Hand CE

M841 LED Stalk Markers

Vertical mount LED stalk lamps. Dual voltage (12/24V)
Overall size (W x H x D mm): 134 x 148 x 40mm Base size (W x D mm): 100 x 40mm
With amber indicator. ECE approved.

RUB841/01/04 RUB841/01/05
Right hand Left hand

WA Ref PSH Voltage (V) Side Connector Notes

RUB841/01/04 081.100.079.600 12/24V Right Hand CE
RUB841/01/05 081.100.080.600 12/24V Left Hand CE

55
Marker Lamps
LED End Outline Marker Lamps
Dual voltage (12/24V). LED End Outline Marker Lamp.
50cm hardwired cable with PRS connector. Polycarbonate housing with unique optical design.
Dimensions (W x H x D mm): 182 x 111.3 x 54.8mm Mounted on flexible rubberised base.
Mounting Hole Distance: 76mm ECE R10 approved.

LAM9548 LAM9549
Left hand Right hand

WA Ref PSH Voltage (V) Description Base Colour

LAM9548 081.100.120.430 12/24V Left hand marker lamp Black
LAM9549 081.100.121.430 12/24V Right hand marker lamp Black

Rubber Outline Markers

Dual Voltage (12/24V) Fully waterproof.
Dimensions: 82 x 101 x 66mm ECE approved.

LED1004RWM LED1005RWM

WA Ref PSH Voltage (V) Description Base Colour

LED1004RWM 081.100.014.435 12/24V Front and Rear Marker Black
LED1005RWM 081.100.017.435 12/24V Front and Rear Marker with Integrated Side Marker Black

56
 Combination Lamps
L78 Series LED Rear Lamps
Indicator, Stop, Tail, Reflex Reflector, Reverse, and Fog. ECE and EMC approved.
Dimensions (L x H x W mm): 345 x 126.4 x 39mm Mounting bolt distance: 152mm

BRIL78.01.LDV includes red side marker lamp which is permitted under the requirement of ECE Reg 48 and ECE Reg 91.

BRIL78.00.LDV BRIL78.01.LDV
Includes side-marker

WA Ref PSH Voltage (V) Description

BRIL78.00.LDV 080.400.011.600 12/24V Britax 5 function LED rear lamp
BRIL78.01.LDV 080.400.012.600 12/24V Britax 5 function LED rear lamp and side-marker

Rear Combination Lamp

Amber LEDs at top, red LEDs at bottom. Light appears clear when unlit.
24 LEDs. Meets ECE / ADR requirements for all functions.
Low-profile surface mounting. IP67 ingress protection.
Dual voltage (12/24V). Hard wired terminals and 2m long cabling.
1291 dimensions (L x W x D mm): 222 x 48 x 20mm 193mm mounting centres.

PETPM-2291A-R
24 LEDs · 222 x 48 x 20mm

WA Ref PSH Voltage (V) Dimensions LEDs Functions Notes

PETPM-2291A-R 080.400.074.600 9-32V 224 x 48 x 20mm 24 Stop, Tail, Indicator Amber top and Red bottom, clear when unlit.

57
Combination Lamps
853-Series LED Combination Lamp
N

5 Function Rear Combination lamp with progressive indicator

Dual Voltage (12/24V) ECE R10, R3, R6, R7, R23, R38 approvals.
Stop, tail, turn, reverse, fog functions. Polycarbonate lens and housing.
Surface mount. IP67 rating.
Dimensions 284 x 100 x 35mm

LAM1317
5 Function Rear Combination Lamp with Progressive Indicator

WA Ref PSH Voltage (V) Description

LAM1317 080.400.106.430 12/24V 5 Function Rear Combination Lamp with Progressive Indicator

820-Series LED Combination Lamp

N

Multi Voltage (10-30V) ECE R10, R148 approvals.

Static light for stop, tail, indicator functions Polycarbonate lens and housing.
Surface mount with screws or 3M adhesive. IP67 rating.
Dimensions 131 x 31 x 6.6mm

LAM1922
Red/Amber Compact Rear Combination Lamp

WA Ref PSH Voltage (V) LEDs Description

LAM1922 ??? 10-30V 6 Red/Amber compact rear combination lamp

58
 Combination Lamps
Connix Wireless Combination Lamp Set
Connix is a wireless, rechargeable, and magnetic rear combination lamp set which can be used with any vehicle that uses an EU 7-pin,
12V ‘N’ towing connector (SCT1201/2). Each rear lighting unit provides four functions - stop, tail, indicator, and number plate lighting.

Features:
Multifunctional : Use Connix as rear lighting, indicators, stop lights, or to illuminate the number plate.
Magnetic : The Connix lighting sets can be quickly swapped between vehicles and machinery with no tools.
Rechargeable : Charge for 4 hours for up to 10 hours of lighting.
Wireless : Connix uses a 7-pin transmitter that is fitted into the vehicle 7-pin socket.
Durable : Long lasting and extremely durable.

Specification: Kit Contents:

3.7V 2000mAh lithium-ion battery with 20 hour standby. 1 x LH rechargeable, magnetic, wireless rear light
4 hour charging time. 1 x RH rechargeable, magnetic, wireless rear light
2.4GHz digital wireless connectivity. 1 x 7-pin transmitter unit
20m maximum transmission distance. 1 x USB to cigar lighter charger.
IP65 ingress protection. 1 x USB charging station.
-20ºC to +50ºC operating temperature range.
ECE Reg 10 approval.

Running Time:
Rear Light - 10 hours Number Plate - 10 hours
Indicator - 3 hours Brake - 3 hours

Magnetic, Rechargeable, Wireless

Connix Rear Lights

Wireless Transmitter

LAM2520
Connix Lighting Set

WA Ref PSH Voltage (V) Connector Pole Functions Notes

LAM2520 080.400.133.430 12V CE Double pole Rear, Stop, Tail, Indicator, Reflex With number plate lamp

59
 Combination Lamps
Fully Submersible Combination Lamps
12V only and dual voltage (12/24V) versions available. Mounting studs centres: 70mm
ECE and EMC approved.

LED100ARME LED100BARE2 LED101BAR2

100 x 100 x 22mm · Single 100 x 100 x 22mm · Twin 100 x 100 x 22mm · Twin

WA Ref PSH Voltage (V) Description Pack Quantity

LED100ARME 080.400.017.435 12/24V Stop/Indicator/Reflex Reflector Single
LED100BARE2 080.400.019.435 12V Stop/Indicator/Reflex Reflector Twin
LED101BAR2 080.400.026.435 12V Stop/Indicator/Tail Twin

Fully Submersible Combination Lamps

12V only and dual voltage (12/24V) versions available. Mounting studs centres: 100mm
ECE approved.

LED150ARME LED150BARE2 LED151BAR2

150 x 80 x 24mm 150 x 80 x 24mm 150 x 80 x 24mm

WA Ref PSH Voltage (V) Description Pack Quantity

LED150ARME 080.400.032.435 12/24V Stop/Indicator/Reflex Reflector Single
LED150BARE2 080.400.035.435 12V Stop/Indicator/Reflex Reflector Twin
LED151BAR2 080.400.037.435 12V Stop/Indicator/Tail Twin

60
 Combination Lamps
99 Series Compact Combination Lamps
12V only. Fully waterproof.
500mm cable length. Dimensions (W x H x D mm): 107 x 107 x 23mm
ECE approved.

LED99AR2 LED99ARLL2
Without license plate lamp With license plate lamp

WA Ref PSH Voltage (V) Description Pack Quantity

LED99AR2 080.400.062.435 12V Stop / Tail / Indicator / Reflector Twin
LED99ARLL2 080.400.065.435 12V Stop / Tail / Indicator / Reflector / License Plate Lamp Twin

149 Series Compact Combination Lamps

12V only. 400mm cable length.
Available with optional integrated number plate lamp. Approved for both horizontal and vertical mounting.
ECE approved.

LED149BAR LED149BARLP
150 x 80 x 29mm 150 x 80 x 29mm
Without license plate lamp With license plate lamp

WA Ref PSH Voltage (V) Description Pack Quantity

LED149BAR 080.400.029.435 12V Stop / Tail / Indicator / Reflector Single
LED149BARLP 080.400.030.435 12V Stop / Tail / Indicator / Reflector / License Plate Lamp Single
LED149BARLP2 080.400.031.435 12V Twin Pack: 1x LED149BAR, 1x LED149BARLP Twin

61
 Combination Lamps
80 Series Double Lamps
Lamp size: 80 x 80 x 25mm For small commercial vehicles.
Base size: 188 x 100 x 28mm Dual voltage (12/24V).
Mounting holes: 150mm apart Sealed electronics.
40cm hardwired cable. ECE approved.

LED80BARME

WA Ref PSH Voltage (V) Description Base Colour

LED80BARME 080.400.047.435 12/24V Rear Stop/Tail/Indicator Black

80 Series Triple Lamps

Lamp size: 80 x 80 x 25mm For small commercial vehicles.
Base size: 278 x 100 x 28mm Dual voltage (12/24V).
Mounting holes: 240mm apart Sealed electronics.
40cm hardwired cable. ECE approved.

LED80BARRME LED80BRAWME LED80BFARME

WA Ref PSH Voltage (V) Description Base Colour

LED80BARRME 080.400.048.435 12/24V Rear Stop/Tail/Indicator Black
LED80BRAWME 080.400.050.435 12/24V Rear Stop/Tail/Indicator/Reverse Black
LED80BFARME 080.400.049.435 12/24V Rear Stop/Tail/Indicator/Fog Black

62
 Combination Lamps
100 Series Triple Combination Lamps
Lamp size: 100 x 100 x 28mm For medium sized commercial vehicles.
Base size: 350 x 120 x 31mm Dual voltage (12/24V).
Mounting holes: 290mm apart Sealed electronics.
40cm hardwired cable. ECE approved.

LED100BSTIWFMLE LED100BSTIWFMRE LED100BRAWME LED100BFARME

WA Ref PSH Voltage (V) Description Base Colour

LED100BSTIWFMLE 080.400.023.435 12/24V Rear Stop/Tail/Indicator/Fog/Reverse Black
LED100BSTIWFMRE 080.400.024.435 12/24V Rear Stop/Tail/Indicator/Fog/Reverse Black
LED100BRAWME 080.400.021.435 12/24V Rear Stop/Tail/Indicator/Reverse Black
LED100BFARME 080.400.020.435 12/24V Rear Stop/Tail/Indicator/Fog Black

L12 Series LED Combination Lamps

Dual voltage (12/24V). IP67 rating.
Suitable for horizontal and vertical mounting. Rubber body.
ECE approved. Dimensions (W x H x D mm): 223 x 112 x 57mm
Stylish slim line lamp for all vehicle applications. Mounting Centres: 111mm with 2xM6 studs

BRIL12.01.LDV
Rear/Stop and Indicator

WA Ref PSH Voltage (V) Description Base Colour

BRIL12.01.LDV 080.400.007.600 12/24V Rear/Stop and Indicator Combination Lamp Black

63
 Rear Lamps
Land Rover Style Tail Lamps
74mm diameter. Use BLB380 for 12V stop/tail lamp.
2-pin female connector use TER6212F. Use BLB382 for 12V indicator, fog, and reverse lamps.
3-pin female connector use TER6213F. ECE approved.

LAM2006 LAM2007 LAM2008 LAM2006L LAM2007L LAM2008L

Indicator Reverse Stop/Tail Replacement Amber Lens Replacement Clear Lens Replacement Red Lens

WA Ref PSH Voltage (V) Description Connector Land Rover Reference

LAM2006 080.200.105.430 12V Indicator Wired RTC5013
LAM2007 080.200.107.430 12V Reverse Wired RTC5012
LAM2008 080.200.109.430 12V Stop/Tail Wired RTC5523
LAM2006L 080.200.106.430 - Replacement lens for LAM2006
LAM2007L 080.200.108.430 - Replacement lens for LAM2007
LAM2008L 080.200.110.430 - Replacement lens for LAM2008

95mm LED Lamps

Multivoltage (9-33V). With flying leads.
95mm diameter. 31.5mm depth.
ECE approved. IP67 waterproof.

LAM1770 LAM1771 LAM1772 LAM1773

Indicator Stop/Tail Reverse Fog

WA Ref PSH Voltage (V) Lens Colour Lamp Colour Description

LAM1770 080.200.097.430 9-33V Amber Amber Indicator
LAM1771 080.200.098.430 9-33V Red Red Stop / Tail
LAM1772 080.200.099.430 9-33V Clear Clear Reverse
LAM1773 080.200.100.430 9-33V Red Red Fog

64
 Rear Lamps
95mm Clear LED Lamps
Multivoltage (9-33V). With flying leads.
95mm diameter. 31.5mm depth.
ECE approved. IP67 waterproof.

LAM1775 LAM1776 LAM1779 LAM1753

Clear· Indicator Clear· Stop/Tail Clear· Stop / Tail / Indicator Flush gasket

WA Ref PSH Voltage (V) Lens Colour Lamp Colour Description

LAM1775 080.200.101.430 9-33V Clear Amber Indicator
LAM1776 080.200.102.430 9-33V Clear Red Stop / Tail
LAM1779 080.200.104.430 9-33V Clear Red / Amber / Clear Stop / Tail / Indicator
LAM1753 080.200.095.430 - Flush gasket for 95mm lamps

95mm Land Rover Style Lamps

Overall size (with bracket): 100mm diameter x 31mm Sealed electronics
Dual voltage (12/24V) ECE approved.

LED95AM LED95RM LED95WM LED95FM LED95BKT

Indicator Stop/Tail Reverse Fog Surface mount bracket

WA Ref PSH Voltage (V) Lens Colour Lamp Colour Description

LED95AM 080.200.051.435 12/24V Clear Amber Indicator
LED95RM 080.200.054.435 12/24V Clear Red Stop / Tail
LED95WM 080.200.055.435 12/24V Clear Red / Amber / Clear Reverse
LED95FM 080.200.053.435 12/24V Fog
LED95BKT 080.200.052.435 - 95mm Surface Mounting Bracket

65
Rear Lamps
MaXilamps
Lamp size: Ø125mm x 40mm Dual voltage (12/24V)
Mounting points: 45mm apart Fully submersible.
Sealed electronics. Shock, rust, and dust proof. 40cm hardwired cable.
ECE approved.

LEDMAXILAMP1XRE LEDMAXILAMP1XCE LEDMAXILAMP1XCFE LEDMAXILAMP1XCWE

Stop/Tail/Indicator· Square Reflector Stop/Tail/Indicator· Circular Reflector Fog· Circular Reflector Reverse· Circular Reflector

WA Ref PSH Voltage (V) Description Reflex Reflector

LEDMAXILAMP1XRE 080.400.072.435 12/24V Stop/Tail/Indicator/Reflector Square
LEDMAXILAMP1XCE 080.400.071.435 12/24V Stop/Tail/Indicator/Reflector Circular
LEDMAXILAMP1XCFE 080.200.067.435 12/24V Fog/Reflector Circular
LEDMAXILAMP1XCWE 080.200.068.435 12/24V Reverse/Reflector Circular

80 Series Square Lamps

Lamp size: 80 x 80 x 25mm For small commercial vehicles.
Base size: 100 x 100 x 28mm Dual voltage (12/24V)
Mounting holes: 60mm apart Sealed electronics.
40cm hardwired cable. ECE approved.

LED80AME LED80RME LED80WME LED80FME LED80BSTIME

Indicator Stop/Tail Reverse Fog Stop/Tail/Indicator

WA Ref PSH Voltage (V) Description Base Colour

LED80AME 080.200.031.435 12/24V Rear Indicator Black
LED80RME 080.200.034.435 12/24V Rear Stop/Tail Black
LED80WME 080.200.035.435 12/24V Rear Reverse Black
LED80FME 080.200.033.435 12/24V Rear Fog Black
LED80BSTIME 080.400.051.435 12/24V Rear Stop/Tail/Indicator Black

66
 Rear Lamps
135 Series Lamps with Bracket
Lamp size: 135 x 38 x 24mm Slim-line lamps.
Surface mounted with bracket. Dual voltage (12/24V)
Sealed electronics. 40cm hardwired cable.
ECE approved.

LED135FME LED135RME LED135ARME

Fog Stop/Tail Stop/Tail/Indicator

WA Ref PSH Voltage (V) Description Base Colour

LED135RME 080.200.015.435 12/24V Rear Stop/Tail Black
LED135ARME 080.400.027.435 12/24V Rear Stop/Tail/Indicator Black
LED135FME 080.200.013.435 12/24V Rear Fog Black

Combined Reversing and Work Lamps

Black powder-coated die cast aluminium housing. Polycarbonate lens.
Ingress Protection: IP67 (LED10015BM is IP69K). ADR, ECE R23 approved for reverse.

LED7312BM LED73120BM LED10015BM

73 x 121 x 31mm 100 x 100 x 31mm 129 x 100 x 40mm

WA Ref PSH Voltage (V) Current (A) Dimensions (W x H x D mm) Lumens (Raw/Effective) Cable length
LED7312BM 081.400.035.435 9-30V 0.59A@12V 0.27A@24V 73 x 121 x 31mm 660lm / 489lm 30cm
LED73120BM 081.400.034.435 12/24V 0.46A@12V 0.7A@24V 100 x 100 x 31mm (cutout: 75 x 75mm) 660lm / 489lm 30cm
LED10015BM 081.400.017.435 12/24V 1.1A@12V 0.5A@24V 100 x 129 x 40mm 1710lm / 1210lm 45cm

67
 Rear Strip Lamps
235 Series Strip Lamps
12V or 24V versions. Fully waterproof.
40cm hardwired cable. Vertical or horizontal mounting.
Cut out: 203 x 19mm Dimensions: 237 x 25 x 16mm
ECE approved.

LED235RHM12E (12V) LED235B1B

LED235RHM24E (24V) Black
LED235RHMME (12/24V)

WA Ref PSH Voltage (V) Description

LED235RHM12E 080.200.023.435 12V High Mount Stop (ECE S3 approved)
LED235RHM24E 080.200.024.435 24V High Mount Stop (ECE S3 approved)
LED235RHMME 080.200.025.435 12/24V High Mount Stop (ECE S3 approved)
LED235B1B 080.200.020.435 - 235 Series Black Bracket

380 Series Strip Lamps

12V or 24V versions. Fully waterproof.
40cm hardwired cable. Vertical or horizontal mounting.
Cut out: 348 x 19mm Dimensions: 383 x 25 x 16mm
ECE approved.

LED380R12E (12V) LED380B1B

Black
LED380R24E (24V)
Stop/Tail

WA Ref PSH Voltage (V) Description

LED380R12E 080.200.023.435 12V Red, Stop / Tail
LED380R24E 080.200.024.435 24V Red, Stop / Tail
LED380B1B 080.200.020.435 - 380 Series Black Bracket

68
 Number Plate Lamps
Number Plate Lamps BULB

ECE approved.

LAM2035 LAM2200 LAM2210 LAM2230

WA Ref PSH 12V Bulb 24V Bulb Dimensions Notes

LAM2035 081.200.013.430 2 x BLB233 2 x BLB249 Landrover XFL100550, Lucas 53837. Uses 2 bulbs. Supplied with 12V bulbs.
LAM2200 081.200.014.430 BLB239 BLB242 Black finish. Fits on flat surface. Supplied with 12V bulb.
LAM2210 081.200.015.430 BLB239 BLB242 Chrome finish. Fits on flat surface. Supplied with 12V bulb.
LAM2230 081.200.016.430 BLB245 BLB246 90x46x45mm Supplied without bulb.

LED Number Plate Lamps

ECE approved.
Dual voltage (12/24V).

LAM2245 LAM2255 LAM2260

WA Ref PSH Dimensions (W x H x D mm) Mounting hole distance Notes

LAM2245 081.200.017.430 120 x 42 x 46mm 53mm With 12 LEDs.
LAM2255 081.200.018.430 90.3 x 30.6 x 46.3mm 51.5mm IP67 ingress protection. 50cm cable with PRS connector.
LAM2260 081.200.019.430 87 x 38.3 x 38.5mm 40mm IP67 ingress protection. 45cm cable.

69
 Number Plate Lamps
35 Series Number Plate Lamps
Dual voltage (12/24V) Fully waterproof
Dimensions: 76 x 41.5 x 30mm Mounting hole distance: 64mm
ECE approved.

LED35BLME

WA Ref PSH Voltage (V) Description Base Colour

LED35BLME 080.200.015.435 12/24V Number Plate Lamp Black
LED35BLME1P 080.400.027.435 12/24V Number Plate Lamp with 2-pin accessory connector Black

41 Series Number Plate Lamps

Dual voltage (12/24V) Fully waterproof.
Dimensions (W x H x D mm): 67 x 42 x 40mm ECE approved.

LED41BLM

WA Ref PSH Voltage (V) Description Cable Length

LED41BLM 080.200.015.435 12/24V Number Plate Lamp 20cm
LED41BLME1P 080.400.027.435 12/24V Number Plate Lamp with 2-pin accessory connector 1m

70
 Driving Lamps
Oval LED Driving Lamp
Dual Voltage (12/24V) Driving Beam: 2 x 10W LEDs
Dimensions (H x W x D mm): 178 x 245 x 109mm Position: 18 x 0.5W LEDs
ECE R112, R7, R10 approvals. Ingress Protection: IP67
Current @ 12V (beam / side): 1.25A / 0.15A Cable length: 30cm
Current @ 24V (beam / side): 0.6A / 0.15A Stainless steel bracket and protective cover.

Inactive Side Light Driving Beam

LEDDL245

WA Ref PSH Voltage (V) Description

LEDDL245 080.500.001.435 12/24V 245mm Oval LED Driving Lamp with integrated front position lamp

71
 Work Lamps
Square LED Spot Work Lamp
N

Multivoltage (12-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: PMMA
Dimensions: 110 x 73 x 42mm Housing material: Aluminium
4 LEDs 1,080 lumens

LAM2335
W: 73mm H:110mm D: 42mm
4 LEDs · Spot beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2335 ??? 12-80V 1080lm Spot 73 x 110 x 42mm 4 R10

Square LED Flood Work Lamp

N

Multivoltage (12-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: PMMA
Dimensions: 125 x 108 x 45mm Housing material: Aluminium
9 LEDs 1,400 lumens

LAM2333
W: 108mm H:125mm D: 45mm
9 LEDs · Flood beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2333 ??? 12-80V 1400lm Flood 108 x 125 x 45mm 9 R10

72
 Work Lamps
Square LED Flood Work Lamp
N

Multivoltage (9-32V) ECE R10 and R23 approval.

IP68 ingress protection. Lens material: Polycarbonate
Dimensions: 71.7 x 85.6 x 37mm Housing material: Aluminium
4 LEDs 1,400 lumens
With AMP connector.

LAM2336
W: 72mm H: 86mm D: 37mm
4 LEDs · Flood beam · AMP connector

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Notes
LAM2336 ??? 9-32V 820lm Flood 71.7 x 85.6 x 37mm 4 With AMP connector

Square LED 15W Flood Work Lamp

N

Multivoltage (10-36V) ECE R10 approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 85 x 112 x 38mm Housing material: Aluminium
12 LEDs 1,800 lumens

LAM2366
W: 85mm H: 112mm D: 38mm
20 LEDs · Flood beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2366 081.400.064.430 10-30V 1800lm Flood 85 x 112 x 38mm 12 R10

73
 Work Lamps
Square LED 75W Flood Work Lamp
N

Multivoltage (10-36V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 108 x 135 x 55mm Housing material: Aluminium
25 LEDs 5,625 lumens

LAM2338
W: 108mm H:135mm D: 55mm
25 LEDs · Flood beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2338 ??? 10-36V 8625lm Flood 108 x 135 x 55mm 25 R10

Combi Beam LED Work Lamp

N

Multivoltage (10-30V) ECE R10 approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 85 x 112 x 38mm Housing material: Aluminium
42 LEDs 3,500 lumens

LAM2367
W: 108mm H: 140mm D: 67mm
42 LEDs · Combi beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2367 081.400.065.430 10-30V 3500lm Combi 108 x 140 x 67mm 43 R10

74
 Work Lamps
Wide Angle 54W LED Work Lamp
N

Multivoltage (10-36V) ECE R10 approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 85 x 112 x 38mm Housing material: Aluminium
18 LEDs 4,000 lumens
240° wide angle flood beam.

LAM2369
W: 145mm H: 84mm D: 48mm
18 LEDs · 240° wide angle flood beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2369 081.400.080.430 10-36V 4000lm 240° Flood 145 x 84 x 48mm 18 R10

Rectangular Spot LED Work Lamp

N

Multivoltage (12-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 160 x 47 x 56mm Housing material: Aluminium
6 LEDs 1,260 lumens

LAM2334
W: 160mm H: 47mm D: 56mm
6 LEDs · Spot beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2334 ??? 12-80V 1260lm Spot 160 x 47 x 56mm 6 R10

75
 Work Lamps
Round LED Flood Work Lamp
N

Multivoltage (12-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: PMMA
Dimensions: 115 x 126 x 50mm Housing material: Aluminium
9 LEDs 1,400 lumens

LAM2328
W: 115mm H: 126mm D: 50mm
9 LEDs · Flood beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2328 081.400.056.430 12-80V 1400lm Flood 115 x 126 x 50mm 9 R10

Oval LED 75W Flood Work Lamp

N

Multivoltage (10-36V) ECE R10 approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 115 x 126 x 50mm Housing material: Aluminium
15 LEDs 5,250 lumens

LAM2337
W: 170mm H: 112mm D: 58mm
15 LEDs · Flood beam

WA Ref PSH Voltage Lumen (lm) Beam Pattern Dimensions (W x H x D mm) LEDs Notes
LAM2337 ??? 10-36V 5250lm Flood 170 x 112 x 58mm 15 R10

76
 Forklift Safety Lamps
Arrow Forklift Safety Lamps 
N

Multivoltage (10-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 160 x 47 x 56mm Housing material: Aluminium
3 LEDs 250 lumens

LAM2385 LAM2387
W: 90mm H: 123mm D: 80mm W: 90mm H: 123mm D: 80mm
3 LEDs · Blue Arrow 3 LEDs · Red Arrow

WA Ref PSH Voltage Lumen (lm) Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2385 ??? 10-80V 250lm Blue Arrow  90 x 123 x 80mm 3 R10
LAM2387 ??? 10-80V 250lm Red Arrow  90 x 123 x 80mm 3 R10

Line Forklift Safety Lamps 

N

Multivoltage (10-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 76 x 79 x 46mm Housing material: Aluminium
2 LEDs 200 lumens

LAM2384 LAM2386
W: 76mm H: 79mm D: 46mm W: 76mm H: 79mm D: 46mm
2 LEDs · Blue Safety Line 2 LEDs · Red Safety Line

WA Ref PSH Voltage Lumen (lm) Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2384 ??? 10-80V 200lm Blue Safety Line  76 x 79 x 46mm 2 R10
LAM2386 ??? 10-80V 200lm Red Safety Line  76 x 79 x 46mm 2 R10

77
 Forklift Safety Lamps
Arc Forklift Safety Lamps 
N

Multivoltage (10-80V) ECE R10 and UKCA approval.

IP67 ingress protection. Lens material: Polycarbonate
Dimensions: 65 x 97 x 41mm Housing material: Aluminium
1 LED 47 lumens

LAM2382 LAM2383
W: 65mm H: 97mm D: 41mm W: 65mm H: 97mm D: 41mm
1 LED · Blue Arc 1 LED · Red Arc

WA Ref PSH Voltage Lumen (lm) Pattern Dimensions (W x H x D mm) LEDs Approval
LAM2382 ??? 9-80V 47lm Blue Arc  65 x 97 x 41mm 1 R10
LAM2383 ??? 9-80V 47lm Red Arc  65 x 97 x 41mm 1 R10

Work Lamp Brackets 

N

A range of mounting bracket accessories.

BEA2021 BEA2022
L-Shaped Bracket for LED Strobe Lights L-Shaped Bracket for LED Strobe Lights
L: 115mm L: 142mm

WA Ref PSH Description Dimensions

BEA2021 ??? L-shaped bracket for LED warning lights 115 x 63 x 20mm
BEA2022 ??? L-shaped bracket for LED warning lights 142 x 63 x 20mm

78
 Interior Lamps
LED Megalux (PD1)
Multivoltage (10-32V) and low power consumption (5W). Uses 4 CREE LEDs.
Easy to install low-profile unit - just 14mm deep. Operating temperature: –30ºC to +40ºC.
Waterproof to IP66. White casing.
Choice of three lighting levels - 480lm, 708lm, and 1248lm. ECE approved.

0
6.2

132
13.5

LBCPD1_4-3MV

WA Ref PSH Voltage (V) Current (A) LED Wattage Luminance Weight
LBCPD1_4-3MV 080.800.013.600 10-32V 0.9A@12V 0.54A@24V 10W 1248lm 0.15kg

Large Round Interior Lamps

Dual voltage (12V/24V). 51 x 0.5W LEDs.
Overall size: Ø130mm x 18.5mm IP67 ingress protection.
Colour temperature: 4500K ECE R10 approval.
Lumens (raw/effective): 1500lm / 750lm Diffused polycarbonate lens

LED13026WM LED13026WM-SW LED13026WM-PIR

Non-Switch Touch Switch PIR Sensor
Direct Connection 3 brightness settings 30 second activation

WA Ref PSH Voltage (V) LEDs Lumens (raw/effective) Dimensions Features

LED13026WM 080.800.026.435 12/24V 51 1500lm / 750lm Ø130mm x 18.5mm Non-Switch Direct Connection
LED13026WM-SW 080.800.028.435 12/24V 51 1500lm / 750lm Ø130mm x 18.5mm Touch Switch, 3 brightness settings
LED13026WM-PIR 080.800.027.435 12/24V 51 1500lm / 750lm Ø130mm x 18.5mm PIR Sensor, 30 second activation

79
 Interior Lamps
148 Series Rectangular Interior Lamps
Dimensions (L x W x D mm): 71 x 148 x 19.5mm Equivalent to 10W light output.
12V only. Low profile compact design.
Current draw [email protected].

LED148GW12 LED148WW12 LED148BW12

Grey · 12V White · 12V Black · 12V

WA Ref PSH Voltage (V) Description Base Colour

LED148GW12 080.800.032.435 12V Rectangular Interior Lamp Grey
LED148WW12 080.800.033.435 12V Rectangular Interior Lamp White
LED148BW12 080.800.030.435 12V Rectangular Interior Lamp Black

White Interior Strip Lamps

Overall size: 10mm depth and 25mm width Cool white LEDs colour simulate fluorescent tube.
Voltage Specific (12V or 24V). With white base and clear lens.

LED1016-12 (12V) LED1031-12 (12V) LED1061-12 (12V) LED10121-12 (12V)

LED1016-24 (24V) LED1031-24 (24V) LED1061-24 (24V) LED10121-24 (24V)
100mm 150mm 300mm 600mm

WA Ref PSH Voltage (V) LEDs Lumens (effective) Dimensions (L x W x D mm) Current (A) Base Colour Lens
LED1016-12 080.800.020.435 12V 16 46lm 100 x 25 x 10mm 0.11A White Clear
LED1031-12 080.800.022.435 12V 31 90lm 150 x 25 x 10mm 0.17A White Clear
LED1061-12 080.800.024.435 12V 61 340lm 300 x 25 x 10mm 0.31A White Clear
LED10121-12 080.800.019.435 12V 121 670lm 600 x 25 x 10mm 0.58A White Clear
LED1016-24 080.800.021.435 24V 16 46lm 100 x 25 x 10mm 0.05A White Clear
LED1031-24 080.800.023.435 24V 31 90lm 150 x 25 x 10mm 0.07A White Clear
LED1061-24 080.800.025.435 24V 61 340lm 300 x 25 x 10mm 0.17A White Clear
LED10121-24 080.800.018.435 24V 121 670lm 600 x 25 x 10mm 0.31A White Clear

80
 Interior Lamps
LED Interior Strip Lamps
LED interior strip lamps with integrated switch. With 100mm flylead.
Available in 12V and 24V versions.

LAM7093 (12V) · LAM7094 (24V) LAM7095 (12V) · LAM7097 (24V)

LAM7098 (12V) · LAM7099 (24V)

WA Ref PSH Voltage (V) LEDs Dimensions (L x W x H mm) Lumens (lm)

LAM7093 080.800.059.430 12V 9 245 x 25 x 15.5mm 324lm
LAM7094 080.800.060.430 24V 9 245 x 25 x 15.5mm 324lm
LAM7095 080.800.061.430 12V 18 400 x 25 x 15.5mm 648lm
LAM7097 080.800.062.430 24V 18 400 x 25 x 15.5mm 648lm
LAM7098 080.800.063.430 12V 27 555 x 25 x 15.5mm 972lm
LAM7099 080.800.063.430 24V 27 555 x 25 x 15.5mm 972lm

LED Interior Strip Lamps

Aluminium extruded body with moulded plastic ends. With integrated switch.
Multivoltage (10V-33V).

LAM7063 LAM7073

LAM7083

WA Ref PSH Voltage (V) LEDs Dimensions (L x W x D mm)

LAM7063 080.800.056.430 10-30V 21 160 x 39.5 x 21mm
LAM7073 080.800.057.430 10-30V 42 260 x 39.5 x 21mm
LAM7083 080.800.058.430 10-30V 63 360 x 39.5 x 21mm

81
 Interior Lamps
LED Orizon (LEDCW)
Long life high intensity LEDs. Operating temperature: –30ºC to +40ºC.
Ultra-versatile. Simple and easy to install.
Waterproof to IP67. Cool-white.
ECE approved.
11

522/1022
18

Cross Section LBCORIZONCLIP1 LBCORIZONCLIP2

WA Ref PSH Voltage (V) Length (mm) Current (A) LEDs Light Output (lm) Wattage (W)
LBCLEDCW500PV3 080.800.003.600 12V (10-14V) 522mm 0.44A 24 640lm 5.9W
LBCLEDCW500PV3/2 080.800.004.600 24V (20-28V) 522mm 0.22A 24 640lm 5.9W
LBCLEDCW1000PV3 080.800.001.600 12V (10-14V) 1,020mm 0.88A 48 1108lm 12W
LBCLEDCW1000PV3/2 080.800.002.600 24V (20-28V) 1,020mm 0.44A 48 1108lm 12W

WA Ref PSH Material Clip Type Mounting Angle Pack Quantity

LBCORIZONCLIP1 080.800.008.600 Clear Plastic Clip 0º Sold individually
LBCORIZONCLIP2 080.800.009.600 Clear Plastic End Stop 0º Sold individually

LED Nebula (SI5)

Long life high intensity LEDs. Operating temperature: –30ºC to +40ºC.
Tough aluminium housing. Integrated on/off rocker switch.
ECE approved.
5
44

15 604/1103.5
Cross Section 624/1123.5

WA Ref PSH Voltage (V) Current (A) LED Power (W) Light Output Length (mm) LED Colour
LBCSI5CW500S 080.800.016.600 12V (10-15V) 0.44A 5.9W 640lm 624mm Cool
LBCSI5CW500S/2 080.800.017.600 24V (20-32V) 0.22A 5.7W 640lm 624mm Cool

82
 Lighting
Reflex Reflectors
Approved for both vertical and horizontal applications. Sold in twin packs.

LED7030AE LED7030RE
Amber· 70 x 30 x 6mm Red· 70 x 30 x 6mm

LED9020A LED9020R
Amber· 90 x 20 x 6mm Red· 90 x 20 x 6mm

WA Ref PSH Colour Dimensions Pack Size Notes

LED7030AE 081.300.001.435 Amber 70 x 30 x 6mm Twin 3M self-adhesive
LED7030RE 081.300.003.435 Red 70 x 30 x 6mm Twin 3M self-adhesive
LED9020A 081.300.006.435 Amber 90 x 20 x 6mm Twin 3M self-adhesive
LED9020R 081.300.007.435 Red 90 x 20 x 6mm Twin 3M self-adhesive

Dummy Load Resistors

The dummy load resistor is designed to be used on vehicles that have electronic components that are not LED compatible. The use
of an optional load resistor simulates the current draw used by a standard direction indicator bulb and enables the flasher unit to
operate correctly. Dummy load resistors must be mounted on a metal surface. The resistors can reach up to +170°C. Do not mount
on any surface that can melt by the heat of the resistor. This includes plastics, hoses, or painted surfaces.

Indicator Switched +

LAM7212 LAM7212
LAM7224 LAM7224

Left Right
Lamp Lamp

LAM7212· LAM7224

WA Ref PSH Voltage (V) Description

LAM7212 081.000.005.430 12V 50W 6Ω Dummy Load Resistor
LAM7224 081.000.006.430 24V 50W 24Ω Dummy Load Resistor

83
 Lighting
8mm LED Pilot Lights
12V version
Fits 8mm round hole.
With chrome bezel.

WL1020A WL1020B WL1020G WL1020R

WA Ref PSH Voltage (V) Description

WL1020A 081.500.098.430 12V Amber LED warning lamp
WL1020B 081.500.099.430 12V Blue LED warning lamp
WL1020G 081.500.100.430 12V Green LED warning lamp
WL1020R 081.500.101.430 12V Red LED warning lamp

USB Rechargeable Inspection Lamps

A range of handheld rechargeable inspection lamps via USB cable or charging dock.
High/low brightness work light with top position torch. Natural white 6500K light output.
IP65 ingress protection Water, shock, and oil resistant.
With super-strong magnetic base. 4-hour charge time.

LEDHH340 LEDHH190
Inspection wand Inspection lamp
USB cable USB cable

WA Ref PSH Dimensions Lumens Operating time Pivot Charging

(H x W x D mm) (hours) positions
LEDHH340 080.600.003.435 340 x 41.5 x 61mm Low: 300lm High: 600lm Top: 120lm Main: 3.0hrs Top: 7hrs 5 / 120° USB cable
LEDHH190 080.600.001.435 190 x 56 x 34mm Main: 350lm Top: 80lm Main: 3.5hrs Top: 8hrs 7 / 180° USB cable

84
 Lighting
LED Pocket Torch
8 LED pocket torch with magnetic clip. CE approved.
Supplied with 3 x AAA batteries (BAT1010). 120 lm

HAL1132
8 LED pocket torch

WA Ref PSH Dimensions Description

HAL1132 080.600.005.430 160 x 35 x 16mm 8 LED pocket torch with magnetic clip.

85
 Cable
Cable Part Numbers Explained
Many of our cables are available in different colours and reel sizes. To order your required colour and size, please state the part
number, colour (see chart below), and the length you require.

For example:
Single Core Thin Wall Auto Cable
3.0mm2 conductor cross section
Red sheath
50m reel
translates to...

CAB1060R50
Single Core Thin Wall Auto Cable Red 50m
3.0mm2 conductor cross section Sheath Reel

Cable Part Number = Wood Auto Reference + Colour Code + Length (m)

Colour Codes
Black.........................................B Light Green.......................L Red..................................... R

Blue......................................... U Orange............................. O Yellow................................ Y

Brown.....................................N Pink.................................... K Transparent...................... T

Green......................................G Purple.................................P None.................................X

Grey/Slate............................... S White.............................. W

86
 Cable
Single Core Thin Wall Auto Cables
Thin Wall (non-irradiated PVC)
ISO 6722 Part 4:1993 (Class B)
Low voltage cable suitable for use in automotive, marine, and general applications.
Operating range –40°C to +105°C with short excursions up to +120°C.
Lead free and Cadmium free.

WA Ref Conductor Conductor Nominal Maximum Maximum Resistance Lengths Available (m)
Specification Cross section Current Cable Dia. Loading (W) per metre at (Single Colours)
(mm) (mm2) Rating (A) (mm) 12V 24V 20ºC (Ω) 10 30 50 100 250 300 500
CAB1000 16/0.20 0.5 11.0 1.7 132 264 0.0371 · · ·  · · ·
CAB1010 24/0.20 0.75 14.0 1.9 168 336 0.0247 · · ·  · · ·
CAB1020 32/0.20 1.0 16.5 2.1 198 396 0.0185 · · ·  · · ·
CAB1030 21/0.30 1.5 21.0 2.4 252 504 0.0127 · · ·  · · ·
CAB1040 28/0.30 2.0 25.0 2.8 300 600 0.00942 · · ·  · · ·
CAB1050 35/0.30 2.5 29.0 3.0 348 696 0.00760 · · ·  · · ·
CAB1060 44/0.30 3.0 33.0 3.4 396 792 0.00600 ·  ·  · · ·
CAB1070 56/0.30 4.0 39.0 3.8 468 936 0.00471 ·  ·  · · ·
CAB1080 65/0.30 4.5 42.0 4.1 504 1008 0.00406 ·  ·  · · ·
CAB1090 84/0.30 6.0 50.0 4.3 600 1200 0.00314 ·  · · · · ·
CAB1140 97/0.30 7.0 57.0 5.1 684 1368 0.00279 ·  · · · · ·
CAB1100 120/0.30 8.5 63.0 5.6 756 1368 0.00220 ·  · · · · ·
CAB1110 80/0.40 10.0 70.0 6.0 840 1680 0.00182 ·  · · · · ·

Thin Wall Battery and Starter Cables

ISO 6722:2002 (Class B)
Plain Copper Conductors · PVC Insulated 105°C

WA Ref Conductor Conductor Nominal Maximum Maximum Resistance Lengths Available (m)
Specification Cross section Current Cable Dia. Loading (W) per metre at (Single Colours)
(mm) (mm2) Rating (A) (mm) 12V 24V 20ºC (Ω) 10 30 50 100 250 500
CAB1200 126/0.40 16 110 7.9 1320 2640 0.00160   · · · ·
CAB1210 196/0.40 25 170 9.4 2040 4080 0.000757   · · · ·
Grey/Slate (S)

Grey/Slate (S)
Lt Green (L)

Lt Green (L)
Orange (O)

Orange (O)
White (W)

White (W)
Brown (N)

Brown (N)
Green (G)

Green (G)
Yellow (Y)

Yellow (Y)
Purple (P)

Purple (P)
Black (B)

Black (B)
Blue (U)

Blue (U)
Pink (K)

Pink (K)
Red (R)

Red (R)

WA Ref WA Ref
CAB1000        ·     CAB1070  ·  · · · · · · ·  ·
CAB1010      · · · · ·   CAB1080  ·  · · · · · · ·  
CAB1020      ·  ·     CAB1090  ·  · · · · · · ·  ·
CAB1030     · · · ·  ·   CAB1140  · · · · · · · · ·  ·
CAB1040     · · · · ·    CAB1100  ·  · · · · · · ·  ·
CAB1050  ·   · · · ·    · CAB1110  · · · · · · · · ·  ·
CAB1060    · · · · · · ·  · CAB1200  · · · · · · · · ·  ·
CAB1210  · · · · · · · · ·  ·

87
 Cable
Thin Wall 2 Core Auto Cables (Flat Twins)
Sheath Colour Core Colour
Black Black, Red
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB1400 2 x 16/0.20 2 x 0.5 11.0 3.5 x 5.5 ·  ·  · ·
CAB1410 2 x 24/0.20 2 x 0.75 14.0 3.5 x 5.5 ·  ·  · ·
CAB1420 2 x 32/0.20 2 x 1.0 16.5 3.5 x 5.5 ·  ·  · ·
CAB1430 2 x 21/0.30 2 x 1.5 21.0 3.8 x 6.6 ·  ·  · ·
CAB1440 2 x 28/0.30 2 x 2.0 25.0 3.8 x 6.6 ·  ·  · ·
CAB1450 2 x 35/0.30 2 x 2.5 29.0 4.4 x 7.6 ·  · · · ·
CAB1460 2 x 44/0.30 2 x 3.0 33.0 4.4 x 7.6 ·  · · · ·
CAB1470 2 x 65/0.30 2 x 4.5 42.0 5.7 x 9.5 ·  · · · ·

Thin Wall 2 Core Auto Cables (Round Twins)

Sheath Colour Core Colour
Black Black, Red
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB1700 2 x 16/0.20 2 x 0.5 11.0 5.2 ·  ·  · ·
CAB1710 2 x 24/0.20 2 x 0.75 14.0 5.3 ·  ·  · ·
CAB1720 2 x 32/0.20 2 x 1.0 16.5 5.0 ·  ·  · ·
CAB1730 2 x 21/0.30 2 x 1.5 21.0 6.4 ·  · · · ·
CAB1740 2 x 28/0.30 2 x 2.0 25.0 6.8 ·  · · · ·
CAB1750 2 x 35/0.30 2 x 2.5 29.0 6.7 ·  · · · ·

Thin Wall 3 Core Auto Cables

Sheath Colour Core Colour
Black Black, Red, Green
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB1500 3 x 24/0.20 3 x 0.75 14.0 5.6 ·  ·  · ·
CAB1510 3 x 32/0.20 3 x 1.0 16.5 5.6 ·  · · · ·
CAB1520 3 x 21/0.30 3 x 1.5 21.0 6.8 ·  · · · ·

88
 Cable
Thin Wall 4 Core Auto Cables
Sheath Colour Core Colour
Black Brown, Green, Red, White
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB1600 4 x 32/0.20 4 x 1.0 16.5 5.8 ·  ·  · ·
CAB1610 4 x 24/0.20 4 x 0.75 14.0 5.8 ·  ·  · ·
CAB1620 4 x 21/0.30 4 x 1.5 21.0 7.6 ·  · · · ·

Thin Wall 5 Core Auto Cables

Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB1800 5 x 32/0.20 5 x 1.0 16.5 6.3 ·  ·  · ·
CAB1810 5 x 24/0.20 5 x 0.75 14.0 6.3 ·  · · · ·
CAB1820 4 x 32/0.20 4 x 1.0 16.5 7.6 ·  · · · ·
1 x 28/0.30 1 x 2.0 25.0

Thin Wall 7 Core Auto Cables

Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow,
Black, Blue
 

WA Ref Conductor Conductor Nominal Maximum Sheath Lengths Available (m)

Specification Cross section Current Cable Dia. Colour
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB2000 7 x 24/0.20 7 x 0.75 14.0 6.8 Black ·  ·  · ·
CAB2010 6 x 32/0.20 6 x 1.0 16.5 7.8 Black ·  ·  · ·
1 x 28/0.30 1 x 2.0 25.0
CAB2020 7 x 16/0.20 7 x 0.5 11.0 7.0 Black ·  · · · ·
CAB2030 7 x 32/20 7 x 1.0 16.5 7.4 Black ·  ·  · ·
CAB2040 6 x 21/0.30 6 x 1.5 21.0 10.1 Grey ·  · · · ·
1 x 35/0.30 1 x 2.5 29.0

89
 Cable
Thin Wall 8 Core Auto Cables
Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow,
Black, Blue, Purple
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB3500 7 x 32/0.20 7 x 1.0 16.5 8.5 · ·  · · ·
1 x 28/0.30 1 x 2.0 25.0

Thin Wall 10 Core Auto Cables

Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow,
Black, Blue, Purple, Orange, Grey
 
WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)
Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB3700 9 x 32/0.20 9 x 1.0 16.5 9.8 · ·  · · ·
1 x 28/0.30 1 x 2.0 25.0

Thin Wall 13 Core Auto Cables

Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow, Black,
Blue, Purple, Orange, Grey, Red/Black,
Pink, Light Brown
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB3900 12 x 21/0.30 12 x 1.5 21.0 12.3 · ·  · · ·
1 x 35/0.30 1 x 2.5 29.0
CAB3901 8 x 30/0.25 8 x 1.5 21.0  · · · · ·
5 x 50/0.25 5 x 2.5 29.0

90
 Cable
Single Core PVC Auto Cables
Low voltage wiring cables – suitable for automotive, marine,
and general applications.
Resistant to petrol, diesel, lubricating oils, and diluted acids.
Suitable for use at temperatures up to 70°C.
Manufactured in accordance with BS6862 Part 1:1971 where applicable.
Plain copper conductors to BS6360 – PVC insulated.

WA Ref Conductor Conductor Nominal Maximum Maximum Resistance Lengths Available (m)
Specification Cross section Current Cable Dia. Loading (W) Per metre at
(mm) (mm2) Rating (A) (mm) 12V 24V 20ºC (Ω) 10 30 50 100 250 500
CAB2200 9/0.30 0.65 5.75 2.5 69 138 0.0294 · ·  · · ·
CAB2210 14/0.30 1.0 8.75 2.7 105 210 0.0189 · ·  · · ·
CAB2220 21/0.30 1.5 12.75 3.1 153 306 0.0125 · ·  · · ·
CAB2230 28/0.30 2.0 17.5 3.4 210 420 0.0094 · ·  · · ·
CAB2240 35/0.30 2.5 21.75 3.8 261 522 0.0075 · ·  · · ·
CAB2250 44/0.30 3.0 27.5 4.2 330 660 0.0060 · ·  · · ·
CAB2260 65/0.30 4.5 35.0 5.1 420 840 0.0041 ·  · · · ·
CAB2270 84/0.30 6.0 42.0 5.9 504 1008 0.0031 ·  · · · ·
CAB2280 97/0.30 7.0 50.0 6.2 600 1200 0.0027 ·  · · · ·
CAB2290 120/0.30 8.5 60.0 7.0 720 1440 0.0022 ·  · · · ·
CAB2300 80/0.40 10.0 70.0 7.5 840 1680 0.0018 ·  · · · ·
Grey/Slate (S)

Grey/Slate (S)
Lt Green (L)

Lt Green (L)
Orange (O)

Orange (O)
White (W)

White (W)
Brown (N)

Brown (N)
Green (G)

Green (G)
Yellow (Y)

Yellow (Y)
Purple (P)

Purple (P)
Black (B)

Black (B)
Blue (U)

Blue (U)
Pink (K)

Pink (K)
Red (R)

Red (R)
WA Ref WA Ref
CAB2200  · · · · · · · ·    CAB2260  · · · · · · · · ·  ·
CAB2210      ·  ·     CAB2270  ·  · · · · · · ·  ·
CAB2220  · · · · · · · · ·  · CAB2280  · · · · · · · · ·  ·
CAB2230     · · · ·     CAB2290  ·  · · · · · · ·  ·
CAB2240  · · · · · · · · ·  · CAB2300  · · · · · · · · ·  ·
CAB2250  · · · · · · · · ·  ·

91
 Cable
2 Core Auto Cables (Flat Twins)
Sheath Colour Core Colour
Black Black, Red
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB2400 2 x 9/0.30 2 x 0.65 5.75 6.1 x 3.8 ·  ·  · ·
CAB2410 2 x 14/0.30 2 x 1.0 8.75 6.5 x 4.0 ·  ·  · ·
CAB2420 2 x 21/0.30 2 x 1.5 12.75 7.0 x 4.1 ·  · · · ·
CAB2430 2 x 28/0.30 2 x 2.0 17.5 7.9 x 4.8 ·  ·  · ·
CAB2440 2 x 35/0.30 2 x 2.5 21.75 8.8 x 5.2 ·  ·  · ·
CAB2450 2 x 44/0.30 2 x 3.0 27.5 9.5 x 5.7 ·  ·  · ·
CAB2460 2 x 65/0.30 2 x 4.5 35.0 11.9 x 7.0 ·  · · · ·

3 Core Auto Cables

Sheath Colour Core Colour
Black Black, Red, Green
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB2600 3 x 9/0.30 3 x 0.65 5.75 7.0 ·  ·  · ·
CAB2610 3 x 14/0.30 3 x 1.0 8.75 7.5 ·  ·  · ·
CAB2620 3 x 21/0.30 3 x 1.5 12.75 8.0 · · ·  · ·

4 Core Auto Cables

Sheath Colour Core Colour
Black Brown, Green, Red, White
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB2800 4 x 9/0.30 4 x 0.65 5.75 7.5 ·  · · · ·
CAB2810 4 x 14/0.30 4 x 1.0 8.75 8.1 ·  · · · ·
CAB2820 4 x 21/0.30 4 x 1.5 12.75 9.0 ·  · · · ·

92
 Cable
5 Core Auto Cables
Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow
 

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB3000 5 x 9/0.30 5 x 0.65 5.75 8.3 ·  · · · ·
CAB3010 4 x 14/0.30 4 x 1.0 8.75 9.8 ·  · · · ·
1 x 28/0.30 1 x 2.0 17.5

7 Core Auto Cables

Sheath Colour Core Colour
Black Brown, Green, Red, White,Yellow,
Black, Blue
 

WA Ref Conductor Conductor Nominal Maximum Sheath Colour Lengths Available (m)
Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB3200 7 x 16/0.20 7 x 0.5 4.25 8.5 Black ·  ·  · ·
CAB3210 7 x 9/0.30 7 x 0.65 5.75 9.0 Black ·  ·  · ·
CAB3240 6 x 14/0.30 6 x 1.0 6 x 8.75 10.2 Black ·  ·  · ·
1 x 28/0.30 1 x 2.0 1 x 17.5 Black

Earth Braids (Round Config)

Manufactured in accordance with BS6862 Part 1:1971.
Tinned copper conductors.
Sheath Colour
Use ‘X’ when specifying the colour code.

WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB4000 16/16/0.30 19 130 7.2  · · · · ·

93
 Cable
Extra Flexible PVC Battery/Welding Cables
Single insulated extra flexible welding/battery cables.
Designed for use in tough working environments.
Resistant to petrol, lubricating oils, and diluted acids.
Plain copper conductors – PVC insulated
Sheath Colour
Black, Red


WA Ref Conductor Conductor Nominal Maximum Lengths Available (m)

Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) (mm) 10 30 50 100 250 500
CAB4600 206/0.30 16 110 8.3   · · · ·
CAB4610 266/0.30 20 135 9.0   · · · ·
CAB4620 322/0.30 25 170 10.1   · · · ·
CAB4630 451/0.30 35 240 11.8   · · · ·
CAB4640 539/0.30 40 300 12.7  · · · · ·
CAB4650 640/0.30 50 345 13.5   · · · ·
CAB4660 805/0.30 60 415 15.0  · · · · ·
CAB4670 905/0.30 70 485 15.4  · · · · ·
CAB4680 684/0.40 95 500 17.9  · · · · ·

Ignition Cables (High Tension)

Manufactured in accordance with BS6862 Part 1:1971.
Plain copper conductors – PVC insulated and sheathed.
Sheath Colour
Black


WA Ref Conductor Conductor Maximum Lengths Available (m)

Specification Cross section Cable Dia.
(mm) (mm2) (mm) 10 30 50 100 250 500
CAB5000 16/0.30 1.15 7.0 ·  · · · ·

Stereo Speaker Cables

Twin flat figure of 8 cables suitable for
wiring speaker systems in vehicles.
Plain copper conductors – PVC insulated.

WA Ref Conductor Conductor Nominal Maximum Sheath Colour Lengths Available (m)
Specification Cross section Current Cable Dia.
(mm) (mm2) Rating (A) x width (mm) 10 30 50 100 250 500
CAB5200 2 x 12/0.20 2 x 0.38 2 3.6 x 1.7 Black, Black/White ·  · · · ·
CAB5210 2 x 16/0.20 2 x 0.5 3 3.9 x 1.9 Black, Black/White · · ·  · ·
CAB5220 2 x 24/0.20 2 x 0.75 6 4.3 x 2.1 Black, Black/Red · · ·  · ·
CAB5230 2 x 32/0.20 2 x 1.0 10 4.6 x 2.3 Black, Black/Blue ·  · · · ·

94
 Cable Sleeving
Convoluted
Nylon convoluted sleeving suitable for bundling of wires
and protection against abrasion.
Material: Nylon 6.
Continuous operating temperature –40ºC to +120ºC with short excursions up to +155ºC.
Self extinguishing.
Resistant to petrol, oil, and water.

WA Ref PSH Colour Internal External Length (m)

Diameter (mm) Diameter (mm)
SLV1000 083.500.037.430 Black 6.9 10 25
SLV1001 083.500.038.430 Black 6.9 10 100
SLV1002 083.500.040.430 Black 10.1 13 25
SLV1003 083.500.041.430 Black 10.1 13 100
SLV1004 083.500.042.430 Black 11.8 16 25
SLV1005 083.500.044.430 Black 11.8 16 100
SLV1006 083.500.045.430 Black 14.5 18.5 25
SLV1007 083.500.046.430 Black 14.5 18.5 100
SLV1008 083.500.047.430 Black 16.9 21.2 25
SLV1009 083.500.048.430 Black 16.9 21.2 100
SLV1010 083.500.049.430 Black 20.1 24.5 25
SLV1011 083.500.050.430 Black 20.1 24.5 100
SLV1012 083.500.051.430 Black 23.5 28.3 25
SLV1013 083.500.052.430 Black 23.5 28.3 100

Split Convoluted
Nylon convoluted sleeving suitable for bundling of wires
and protection against abrasion.
Material: Nylon 6.
Continuous operating temperature –40ºC to +120ºC with short excursions up to +155ºC.
Self extinguishing.
Resistant to petrol, oil, and water.
Continuous split running along its length for easy application.

WA Ref PSH Colour Internal External Length (m)

Diameter (mm) Diameter (mm)
SLV1100 083.500.053.430 Black 6.9 10 25
SLV1101 083.500.054.430 Black 6.9 10 100
SLV1102 083.500.055.430 Black 10.1 13 25
SLV1103 083.500.056.430 Black 10.1 13 100
SLV1104 083.500.057.430 Black 11.8 16 25
SLV1105 083.500.058.430 Black 11.8 16 100
SLV1106 083.500.059.430 Black 14.5 18.5 25
SLV1107 083.500.060.430 Black 14.5 18.5 100
SLV1108 083.500.061.430 Black 16.9 21.2 25
SLV1109 083.500.062.430 Black 16.9 21.2 100
SLV1110 083.500.063.430 Black 20.1 24.5 25
SLV1111 083.500.064.430 Black 20.1 24.5 100
SLV1112 083.500.065.430 Black 23.5 28.3 25
SLV1113 083.500.066.430 Black 23.5 28.3 100

95
 Cable Sleeving
Adhesive Lined Heat Shrink
Flexible polyethylene heat shrink sleeving with an adhesive lining.
Designed to provide a permanent encapsulation for protection against
moisture in a wide variety of applications once heated.
Continuous operating temperature of –55ºC to +85ºC.
Self extinguishing.
Shrink temperature from +95ºC to +200ºC.
Shrink ratio of 3 to 1.

WA Ref PSH Colour Internal Diameter Internal Diameter Thickness Length (m)
Before Heating (mm) After Heating (mm) After Heating (mm)
SLV1200 083.500.067.430 Black 3.0 1.0 1.0 1.20
SLV1201 083.500.069.430 Black 4.0 1.3 1.0 1.20
SLV1202 083.500.070.430 Black 6.0 2.0 1.2 1.20
SLV1203 083.500.071.430 Black 9.0 3.0 1.4 1.20
SLV1204 083.500.072.430 Black 12.0 4.0 1.7 1.20
SLV1205 083.500.073.430 Black 19.0 6.0 2.1 1.20
SLV1206 083.500.075.430 Black 24.0 8.0 2.54 1.20
SLV1207 083.500.076.430 Black 39.0 13.0 2.54 1.20

Heat Shrink
Commercial grade flexible polyolefin heat shrink sleeving.
Suitable for a wide range of applications including marking, colour coding,
insulating, bundling of wires, and protection against abrasion.
Continuous operating temperature of –40ºC to +135ºC.
Flame retardant to UL224.
Shrink temperature from +120ºC.
Shrink ratio of 2 to 1.

WA Ref PSH Colour Internal Diameter Internal Diameter Thickness Length (m)
Before Heating (mm) After Heating (mm) After Heating (mm)
SLV1350B 083.500.077.430 Black 2.4 1.2 0.5 5
SLV1350R 083.500.079.430 Red 2.4 1.2 0.5 5
SLV1355B 083.500.081.430 Black 3.2 1.6 0.5 5
SLV1355R 083.500.083.430 Red 3.2 1.6 0.5 5
SLV1360B 083.500.085.430 Black 4.8 2.4 0.5 5
SLV1360R 083.500.087.430 Red 4.8 2.4 0.5 5
SLV1365B 083.500.089.430 Black 6.4 3.2 0.6 5
SLV1365R 083.500.091.430 Red 6.4 3.2 0.6 5
SLV1370B 083.500.093.430 Black 9.5 4.8 0.6 5
SLV1370R 083.500.095.430 Red 9.5 4.8 0.6 5
SLV1375B 083.500.097.430 Black 12.7 6.4 0.6 5
SLV1375R 083.500.099.430 Red 12.7 6.4 0.6 5
SLV1380B 083.500.101.430 Black 19.1 9.5 0.8 5
SLV1380R 083.500.103.430 Red 19.1 9.5 0.8 5
SLV1385B 083.500.105.430 Black 25.4 12.7 0.9 5
SLV1385R 083.500.107.430 Red 25.4 12.7 0.9 5
SLV1390B 083.500.109.430 Black 38.1 19.1 1.0 5
SLV1390R 083.500.112.430 Red 38.1 19.1 1.0 5
SLV1395B 083.500.114.430 Black 50.8 25.4 1.1 5
SLV1395R 083.500.116.430 Red 50.8 25.4 1.1 5

96
 Cable Sleeving
Adhesive Lined Heat Shrink Assortment Kit
37 pieces of adhesive lined heat shrink sleeving. Individually packed.
100cm x SLV1200, 100cm x SLV1201, 100cm x SLV1202, 100cm x SLV1203, 37cm x SLV1204, 25cm x SLV1205.

SLVKIT01
WA Ref PSH Colour Description
SLVKIT01 083.500.132.430 Black Contains 37 pcs in assorted sizes

PVC
General purpose PVC sleeving suitable for bundling of cables and
protection against abrasion.
Continuous operating temperature of –40ºC to +70ºC.
Self extinguishing in 30 seconds.
Resistant to petrol, oil, and water.

WA Ref PSH Colour Internal Wall Length

Diameter (mm) Thickness (mm) (m)
SLV1400 083.500.118.430 Black 4 0.5 100
SLV1401 083.500.119.430 Black 5 0.5 100
SLV1402 083.500.120.430 Black 6 0.5 100
SLV1403 083.500.121.430 Black 8 0.5 100
SLV1404 083.500.122.430 Black 10 0.5 100
SLV1405 083.500.123.430 Black 12 0.5 100
SLV1406 083.500.124.430 Black 14 0.5 100
SLV1407 083.500.125.430 Black 16 0.5 100
SLV1408 083.500.126.430 Black 20 1.0 50
SLV1409 083.500.127.430 Black 25 1.0 50

Spiral Binding
Spiral binding provides a quick and neat method of protecting harnesses and
wiring looms against abrasion.
Once fitted can be constantly adjusted or reused.
Continuous operating temperature of –30ºC to +80ºC.
Material: Polythene (P.E.)

WA Ref PSH Colour Bundle Diameter (mm) Length (m)

SLV1505 083.500.128.430 Black 5 - 30 25
SLV1506 083.500.129.430 Black 8 - 40 25
SLV1507 083.500.130.430 Black 12 - 50 25

97
 Cable Fixings
Cable Ties
Material: Nylon 6.6.
Pack Quantity: 100.
Non-releasable cable ties.
Black colour only. B: Black
WA Ref PSH Width (mm) Length (mm) Max Bundle Diameter (mm)
CT1000B 083.300.002.430 2.5 100 18
CT1010B 083.300.004.430 2.5 160 40
CT1020B 083.300.006.430 2.5 200 50
CT1030B 083.300.008.430 3.6 140 33
CT1040B 083.300.015.430 3.6 200 50
CT1050B 083.300.017.430 3.6 300 76
CT1060B 083.300.019.430 4.8 160 38
CT1070B 083.300.021.430 4.8 200 50
CT1080B 083.300.024.430 4.8 300 76
CT1090B 083.300.031.430 4.8 370 102
CT1100B 083.300.033.430 7.6 300 76
CT1140B 083.300.041.430 7.6 370 100
CT1110B 083.300.035.430 9.0 430 110
CT1120B 083.300.037.430 9.0 530 140
CT1130B 083.300.039.430 9.0 710 190

Nylon P-Clips
Nylon P-Clips for securing cables, pipes, hoses and components.

CMA1000 CMA1001 CMA1002 CMA1003 CMA1004

3.2mm · 1/8" 4.8mm · 3/16" 6.4mm · 1/4" 7.9mm · 5/16" 9.5mm · 3/8"

CMA1005 CMA1006 CMA1007 CMA1008

12.7mm · 1/2" 15.8mm · 5/8" 19.4mm · 3/4" 25.4mm · 1"

WA Ref PSH Diameter (mm) Diameter (inch) Pack Quantity

CMA1000 083.100.003.430 3.2 1/8 50
CMA1001 083.100.004.430 4.8 3/16 50
CMA1002 083.100.005.430 6.4 1/4 50
CMA1003 083.100.006.430 7.9 5/16 50
CMA1004 083.100.007.430 9.5 3/8 50
CMA1005 083.100.008.430 12.7 1/2 50
CMA1006 083.100.009.430 15.8 5/8 50
CMA1007 083.100.010.430 19.4 3/4 50
CMA1008 083.100.011.430 25.4 1 50

98
 Cable Fixings
Zinc Plated Mild Steel P-Clips
Rubber and mild steel (zinc plated) P-Clips for securing cables, pipes, hoses and components.

CMA1100 CMA1101 CMA1102 CMA1103

4.8mm · 3/16" 6.4mm · 1/4" 7.9mm · 5/16" 9.5mm · 3/8"

CMA1104 CMA1105 CMA1106 CMA1107

11.1mm · 7/16" 12.7mm · 1/2" 14.3mm · 9/16" 15.9mm · 5/8"

CMA1108 CMA1109 CMA1110 CMA1111

17.5mm · 11/16" 19.1mm · 3/4" 22.2mm · 7/8" 25.4mm · 1"

WA Ref PSH Diameter (mm) Diameter (inch) Pack Quantity

CMA1100 083.100.021.430 4.8 3/16 10
CMA1101 083.100.022.430 6.4 1/4 10
CMA1102 083.100.023.430 7.9 5/16 10
CMA1103 083.100.024.430 9.5 3/8 10
CMA1104 083.100.025.430 11.1 7/16 10
CMA1105 083.100.026.430 12.7 1/2 10
CMA1106 083.100.027.430 14.3 9/16 10
CMA1107 083.100.028.430 15.9 5/8 10
CMA1108 083.100.029.430 17.5 11/16 10
CMA1109 083.100.030.430 19.1 3/4 10
CMA1110 083.100.031.430 22.2 7/8 10
CMA1111 083.100.032.430 25.4 1 10

99
 Cable Fixings
Bases and Mounts
With adhesive bases. Recommended for most smooth, dry, clean, and grease-free surfaces.
Recommended operating temperatures -20°C to +60°C.

CMA1500 CMA1501 CMA1502 CMA1503 CMA1504 CMA1505

15 x 15mm · Ø5mm 25 x 25mm · Ø7mm 25 x 25mm · Ø12mm 15 x 15mm · Ø5mm 25 x 25mm · Ø7mm 25 x 25mm · Ø12mm

WA Ref PSH Colour Base Size Diameter Pack WA Ref PSH Colour Base Size Diameter Pack
(mm) (mm) Quantity (mm) (mm) Quantity
CMA1500 083.100.041.430 Black 15x15 5 10 CMA1503 083.100.044.430 Natural 15x15 5 10
CMA1501 083.100.042.430 Black 25x25 7 10 CMA1504 083.100.045.430 Natural 25x25 7 10
CMA1502 083.100.043.430 Black 25x25 12 10 CMA1505 083.100.046.430 Natural 25x25 12 10

Cable Tie Fixings

2 way and 4 way cable tie mounts with a self-adhesive base.
The larger 25x25mm base fixings can also be fixed using a self-tapping screw.

CMA1400 CMA1401
20 x 20mm · 3.6" 25 x 25mm · 4.8"

WA Ref PSH Colour Base Size (mm) Diameter (mm) Pack Quantity
CMA1400 083.100.035.430 Black 20x20 3.6 100
CMA1401 083.100.036.430 Black 25x25 4.8 100

Cable Tie Cradles

Cable tie cradles suitable for larger cable ties.
The cradle is fixed to a firm surface using a self-tapping screw.

CMA1405 CMA1406
Centre mount Eyelet mount

WA Ref PSH Colour Mount Type Base Size (mm) Max Cable Tie Size (mm) Pack Quantity
CMA1405 083.100.039.430 Black Centre 22.0x16.0 9.0 100
CMA1406 083.100.040.430 Black Eyelet 19.0x9.0 5.0 100

100
 Battery Leads
Braided Earth Terminals
Conductor cross section: 19mm2 Terminal hole size: 8mm ring
Pack Quantity: 1

WA Ref PSH Length (mm) WA Ref PSH Length (mm)

BET1000 083.600.144.430 150 BET1004 083.600.148.430 450
BET1001 083.600.145.430 225 BET1005 083.600.149.430 600
BET1002 083.600.146.430 300 BET1006 083.600.150.430 760
BET1003 083.600.147.430 375

Economy Jump Leads

Sheathed with flexible PVC insulation with fully insulated, heavy-duty steel crocodile clips.
Quoted engine sizes are for guidance only. If in doubt, please consult a qualified professional.

JLD1040

WA Ref PSH Conductor Continuous Peak Rating Suitable for Suitable for Length (m) Pack
Size (mm2) Rating (A) (A) diesel (cc) petrol (cc) Qty
JLD1040 083.400.005.430 50 345 900 over 7,000 over 7,000 4.5 1 pair

101
 Battery Terminals
Screw Fixing Battery Terminals
+ –

BTT1002P BTT1002N
+ve, Brass Terminal, Tin-plated, up to 40mm2 cable , Brass Terminal, Tin-plated, up to 40mm2 cable

BTT1003P BTT1003N
+ve, Brass Terminal, Tin-plated, up to 60mm2 cable -ve, Brass Terminal, Tin-plated, up to 60mm2 cable

BTT1007P BTT1007N
+ve, Brass Terminal, Tin-plated, up to 95mm2 cable -ve, Brass Terminal, Tin-plated, up to 95mm2 cable

Positive Terminals Negative Terminals

WA Ref PSH Polarity Cable Size Cable Entry WA Ref PSH Polarity Cable Size Cable Entry
(mm2) Hole Size (mm) (mm2) Hole Size (mm)
BTT1002P 083.600.157.430 + up to 40mm2 9.5 BTT1002N 083.600.155.430 – up to 40mm2 9.5
BTT1003P 083.600.161.430 + up to 60mm2 11.8 BTT1003N 083.600.159.430 – up to 60mm2 11.8
BTT1007P 083.600.177.430 + up to 95mm2 16.0 BTT1007N 083.600.175.430 – up to 95mm2 16.0

102
 Battery Terminals
Stud and Nut Fixing Battery Terminals
+ –

BTT1004P BTT1004N
+ve, Brass Terminal, Zinc-plated, M8 stud and nut -ve, Brass Terminal, Zinc-plated, M8 stud and nut

BTT1005P BTT1005N
+ve, Brass Terminal, Zinc-plated, M10 stud and nut, 17mm stud length -ve, Brass Terminal, Zinc-plated, M10 stud and nut, 17mm stud length

BTT1008P BTT1008N
+ve, Brass Terminal, Tin-plated, M10 stud and wing nut, 30mm stud length -ve, Brass Terminal, Tin-plated, M10 stud and wing nut, 30mm stud length

BTT1006P BTT1006N
+ve, Brass Terminal, Tin-plated, M8 stud and wing nut -ve, Brass Terminal, Tin-plated, M8 stud and wing nut

Positive Terminals Negative Terminals

WA Ref PSH Polarity Stud Size Stud Length WA Ref PSH Polarity Stud Size Stud Length
(mm) (mm) (mm) (mm)
BTT1004P 083.600.165.430 + M8 16.0 BTT1004N 083.600.165.430 – M8 16.0
BTT1005P 083.600.169.430 + M10 17.0 BTT1005N 083.600.169.430 – M10 17.0
BTT1008P 083.600.180.430 + M10 30.0 BTT1008N 083.600.180.430 – M10 30.0
BTT1006P 083.600.173.430 + M8 16.0 BTT1006N 083.600.173.430 – M8 16.0

103
 Battery Terminals
Solder or Crimp Battery Terminals
+ –

BTT1011P BTT1011N
+ve, Brass Terminal, Tin-plated, 7.2mm -ve, Brass Terminal, Tin-plated, 7.2mm

BTT1012P BTT1012N
+ve, Brass Terminal, Tin-plated, 8.9mm -ve, Brass Terminal, Tin-plated, 8.9mm

BTT1013P BTT1013N
+ve, Brass Terminal, Tin-plated, 11.5mm -ve, Brass Terminal, Tin-plated, 11.5mm

Positive Terminals Negative Terminals

WA Ref PSH Polarity Cable Size Cable Entry WA Ref PSH Polarity Cable Size Cable Entry
(mm2) Hole Size (mm) (mm2) Hole Size (mm)
BTT1011P 083.600.185.430 + 7.2 CAB4620 BTT1011N 083.600.184.430 – 7.2 CAB4620
BTT1012P 083.600.187.430 + 8.9 CAB4630/40/50 BTT1012N 083.600.186.430 – 8.9 CAB4630/40/50
BTT1013P 083.600.189.430 + 11.5 CAB4670 BTT1013N 083.600.188.430 – 11.5 CAB4670

104
 Battery Terminals
Crimp or Ring Battery Terminals
+ –

BTT1009P BTT1009U
+ve, Brass Terminal, Tin-plated -ve, Brass Terminal, Tin-plated

Positive Terminals Negative Terminals

WA Ref PSH Polarity Cable Size Notes WA Ref PSH Polarity Cable Size Notes
(mm2) (mm2)
BTT1009P 083.600.182.430 + 10·20 BTT1009N 083.600.181.430 – 10·20

Quick Release Battery Terminal

Passivated steel quick release battery terminal. Can be fitted and removed without tools.
For use in caravan and leisure applications. 1x Positive (Red) and 1x Negative (Blue).
Supplied as a pair.

BTT1010

WA Ref PSH Description

BTT1010 083.600.183.430 Quick release battery terminal set

105
 Battery Terminals
Disconnect Battery Terminal
Brass battery terminal suitable for use as a simple security device or battery isolator.
The vehicle cannot be started as the battery is isolated once the green top has been unscrewed.
Fits to the negative battery post.

BTT1016

WA Ref PSH Notes

BTT1016 083.600.192.430 Disconnect battery terminal. Fitted to negative battery post.

Battery Terminal Covers

Battery terminal covers suitable for use with a variety of battery terminals.
Internal dimensions: 48mm (L) x 35mm (W) x 25mm (H). Internal barrel diameter 14mm.
Material: PVC. Supplied in packs of 10.

TER7100B TER7101B TER7102B

TER7100R TER7101R TER7102R

WA Ref PSH Colour Polarity Suitable for use with

TER7100B 083.600.647.430 Black – BTT1011N, 1012N, 1014N, 1015N
TER7100R 083.600.648.430 Red + BTT1011P, 1012P, 1014P, 1015P
TER7101B 083.600.649.430 Black – BTT1002N, 1003N
TER7101R 083.600.650.430 Red + BTT1002P, 1003P
TER7102B 083.600.651.430 Black – BTT1002N, 1003N
TER7102R 083.600.652.430 Red + BTT1002P, 1003P

106
 Battery Terminals
Battery Terminal Covers
Internal dimensions: 62mm (L) x 35mm (W) x 28mm (H). Internal barrel diameter 16mm.
Material: PVC. Supplied in packs of 10.

TER7103B TER7103R

WA Ref PSH Colour Polarity Suitable for use with

TER7103B 083.600.653.430 Black – BTT1013N
TER7103R 083.600.654.430 Red + BTT1013P

Battery Terminal Covers

Battery terminal covers suitable for use with stud type battery terminals.
Material: PVC. Supplied in packs of 10.

TER7104B TER7104R

WA Ref PSH Colour Polarity Suitable for use with

TER7104B 083.600.655.430 Black – BTT1005N, 1008N
TER7104R 083.600.656.430 Red + BTT1005P, 1008P

107
 Connectors and Terminals
Connector Type 0.5 to 1.5mm2 1.5 to 2.5mm2 3.0 to 6.0mm2
9 to 21/0.30mm 21 to 35/0.30mm 44 to 84/0.30mm

Male Spade
4.8mm
Packs of 50
TER1048R TER1048U
083.600.336.430 083.600.337.430

Male Spade
6.3mm
Packs of 50
TER1063R TER1063U TER1063Y
083.600.338.430 083.600.339.430 083.600.340.430

Female Spade
2.8mm
Packs of 50
TER1128R
083.600.341.430

Female Spade
4.8mm
Packs of 50
TER1148R TER1148U
083.600.342.430 083.600.343.430

Female Spade
6.3mm
Packs of 50
TER1163R TER1163U TER1163Y
083.600.344.430 083.600.346.430 083.600.347.430

Female Spade
8.0mm
Packs of 50
TER1180U
083.600.348.430

Female Spade
9.5mm
Packs of 50
TER1195Y
083.600.349.430

Fully Insulated
Female Spade
4.8mm
Packs of 50
TER1248R TER1248U
083.600.350.430 083.600.351.430

Fully Insulated
Female Spade
6.3mm
Packs of 50
TER1263R TER1263U TER1263Y
083.600.352.430 083.600.354.430 083.600.356.430

108
 Connectors and Terminals
Connector Type 0.5 to 1.5mm2 1.5 to 2.5mm2 3.0 to 6.0mm2
9 to 21/0.30mm 21 to 35/0.30mm 44 to 84/0.30mm

Fully Insulated
Female Spade
9.5mm
Packs of 50 TER1295Y
083.600.357.430

Piggy Back
6.3mm
Packs of 50
TER1363R TER1363U TER1363Y
083.600.358.430 083.600.359.430 083.600.360.430

Male Bullet
4.0mm
Packs of 50
TER1540R
083.600.361.430

Male Bullet
5.0mm
Packs of 50
TER1550U TER1550Y
083.600.363.430 083.600.364.430

Female Bullet
4.0mm
Packs of 50
TER1640R
083.600.365.430

Female Bullet
5.0mm
Packs of 50
TER1650U TER1650Y
083.600.366.430 083.600.367.430

Ring
3.2mm
Packs of 50
TER1832R TER1832U
083.600.388.430 083.600.389.430

Ring
3.7mm
Packs of 50
TER1837R TER1837U
083.600.390.430 083.600.391.430

Ring
4.3mm
Packs of 50
TER1843R TER1843U TER1843Y
083.600.392.430 083.600.394.430 083.600.395.430

109
 Connectors and Terminals
Connector Type 0.5 to 1.5mm2 1.5 to 2.5mm2 3.0 to 6.0mm2
9 to 21/0.30mm 21 to 35/0.30mm 44 to 84/0.30mm

Ring
5.3mm
Packs of 50
TER1853R TER1853U TER1853Y
083.600.396.430 083.600.397.430 083.600.398.430

Ring
6.4mm
Packs of 50
TER1864R TER1864U TER1864Y
083.600.399.430 083.600.401.430 083.600.402.430

Ring
8.4mm
Packs of 50
TER1884R TER1884U TER1884Y
083.600.403.430 083.600.404.430 083.600.406.430

Ring
10.5mm
Packs of 50
TER18105R TER18105U TER18105Y
083.600.383.430 083.600.384.430 083.600.385.430

Ring
12.0mm
Packs of 50
TER18120U TER18120Y
083.600.386.430 083.600.387.430

Male Pin
1.9mm
Packs of 50
TER2119R TER2119U
083.600.419.430 083.600.420.430

Male Pin
2.9mm
Packs of 50
TER2129Y
083.600.421.430

Butt Splice
Packs of 50
TER1900R TER1901U TER1902Y
083.600.407.430 083.600.408.430 083.600.409.430

Heat Shrink
Butt Splice
Packs of 100
TER1910R TER1911U TER1912Y
083.600.410.430 083.600.411.430 083.600.412.430

110
 Connectors and Terminals
Connector Type 0.5 to 1.5mm2 1.5 to 2.5mm2 3.0 to 6.0mm2
9 to 21/0.30mm 21 to 35/0.30mm 44 to 84/0.30mm

Heat Shrink
Solder Butt Splice
Packs of 10
TER1918R TER1918U TER1918Y
083.600.416.430 083.600.417.430 083.600.418.430

Pre-insulated Terminal Kit

Pre-insulated terminal assortments.
Contains a selection of terminals packed into a plastic box.

25 x TER1853U 25 x TER1263U
25 x TER1864U 15 x TER1263Y
15 x TER1864Y 10 x TER1295Y
15 x TER1884Y 25 x TER1163U
15 x TER18105Y 25 x TER1063U
25 x TER1900R 25 x TER1540R
25 x TER1901U 25 x TER1550U
15 x TER1902Y 25 x TER1640R
25 x TER1263R 25 x TER1650U

TERKIT02
385pcs Red, blue, and yellow terminals

WA Ref PSH Terminal Count Terminal Kit Contents

TERKIT02 083.600.674.430 385pcs Red, blue, and yellow terminals.

111
 Connectors and Terminals
Non-insulated Terminals
Pack Quantity: 50

TER6350 TER6351 TER6352 TER6353 TER6354

6.3mm Male 6.3mm Female 2.8mm Female 4.8mm Female 9.5mm Female

WA Ref PSH Size (mm) Type

TER6350 083.600.589.430 6.3mm Male Spade
TER6351 083.600.590.430 6.3mm Female Connector
TER6352 083.600.591.430 2.8mm Female Connector
TER6353 083.600.592.430 4.8mm Female Connector
TER6354 083.600.593.430 9.5mm Female Connector

Anderson SB50 Connectors

13.3mm2 conductor size. Dimensions (H x W x D mm): 48 x 35.1 x 15.9mm
Mated Length: 81.3mm

TER3010 TER3020 TER3030 TER3040 TER3050 TER3060

Grey Red Blue Orange Yellow Green

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3010 083.600.469.430 13.3 50A Grey SB50 6319
TER3020 083.600.470.430 13.3 50A Red SB50 6331G1
TER3030 083.600.471.430 13.3 50A Blue SB50 6331G5
TER3040 083.600.472.430 13.3 50A Orange SB50 6331G11
TER3050 083.600.473.430 13.3 50A Yellow SB50 6331G7
TER3060 083.600.474.430 13.3 50A Green SB50 6331G9

112
 Connectors and Terminals
Anderson SB120 Connectors
21.1mm2 conductor size. Dimensions (H x W x D mm): 63.5 x 46.4 x 20.6mm
Mated Length: 104.6mm

TER3111 TER3121 TER3131

Grey Red Blue

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Cover Ref Terminal Ref
TER3111 083.600.487.430 21.1 120A Grey SB120 6810G1 1319G4
TER3121 083.600.491.430 21.1 120A Red SB120 6810G3 1319G4
TER3131 083.600.495.430 21.1 120A Blue SB120 6810G2 1319G4

Anderson SB120 Connectors

33.6mm2 conductor size. Dimensions (H x W x D mm): 63.5 x 46.4 x 20.6mm
Mated Length: 104.6mm

TER3116 TER3126 TER3136

Grey Red Blue

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Cover Ref Terminal Ref
TER3116 083.600.489.430 33.6 120A Grey SB120 6810G1 1319
TER3126 083.600.493.430 33.6 120A Red SB120 6810G3 1319
TER3136 083.600.497.430 33.6 120A Blue SB120 6810G2 1319

113
 Connectors and Terminals
Anderson SB175 Connectors
33.6mm2 conductor size. Dimensions (H x W x D mm): 79.6 x 55.6 x 25.4mm
Mated Length: 133.4mm

TER3115 TER3125 TER3135 TER3145 TER3155

Grey Red Blue Orange Yellow

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3115 083.600.488.430 33.6 175A Grey SB175 6325G5
TER3125 083.600.492.430 33.6 175A Red SB175 6329G5
TER3135 083.600.496.430 33.6 175A Blue SB175 6326G5
TER3145 083.600.499.430 33.6 175A Orange SB175 6327G5
TER3155 083.600.501.430 33.6 175A Yellow SB175 6328G5

Anderson SB175 Connectors

53.5mm2 conductor size. Dimensions (H x W x D mm): 79.6 x 55.6 x 25.4mm
Mated Length: 133.4mm

TER3110 TER3120 TER3130 TER3140 TER3150

Grey Red Blue Orange Yellow

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3110 083.600.486.430 53.5 175A Grey SB175 6325G1
TER3120 083.600.490.430 53.5 175A Red SB175 6329G1
TER3130 083.600.494.430 53.5 175A Blue SB175 6326G1
TER3140 083.600.498.430 53.5 175A Orange SB175 6327G1
TER3150 083.600.500.430 53.5 175A Yellow SB175 6328G1

114
 Connectors and Terminals
Anderson SBE160 Connectors
35.0mm2 conductor size. Dimensions (H x W x D mm): 92.1 x 71.2 x 25.4mm
For auxiliary contact set use TER3301. Mated Length: 146.0mm

TER3310 TER3320 TER3350

Grey Red Yellow

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3310 083.600.511.430 35.0 160A Grey SBE160 E6374G2
TER3320 083.600.512.430 35.0 160A Red SBE160 E6379G2
TER3350 083.600.513.430 35.0 160A Yellow SBE160 E6373G2

Anderson SBX175 Connectors

53.5mm2 conductor size. Dimensions (H x W x D mm): 92.1 x 71.2 x 25.4mm
For auxiliary contact set use TER3301. Mated Length: 146.0mm

TER3510
Grey

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3510 083.600.518.430 53.5 175A Grey SBX175 6374G1

115
 Connectors and Terminals
Anderson SBE320 Connectors
67.4mm2 conductor size. Dimensions (H x W x D mm): 125.4 x 83.4 x 33.3mm
For auxiliary contact set use TER3301. Mated Length: 200.0mm

TER3410 TER3420 TER3430 TER3460

Grey Red Blue Green

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3410 083.600.514.430 67.4 320A Grey SBE320 E6345G1
TER3420 083.600.515.430 67.4 320A Red SBE320 E6347G1
TER3430 083.600.516.430 67.4 320A Blue SBE320 E6346G7
TER3460 083.600.517.430 67.4 320A Green SBE320 E6348G1

Anderson SB350 Connectors

67.4mm2 conductor size. Dimensions (H x W x D mm): 107.9 x 69.9 x 33.3mm
Mated Length: 182.6mm

TER3210 TER3220 TER3230 TER3240 TER3250 TER3260

Grey Red Blue Orange Yellow Green

WA Ref PSH Conductor Size (mm2) Amperage(A) Colour Series Anderson Ref
TER3210 083.600.505.430 67.4 350A Grey SB350 6320G1
TER3220 083.600.506.430 67.4 350A Red SB350 6322G1
TER3230 083.600.507.430 67.4 350A Blue SB350 6321G1
TER3240 083.600.508.430 67.4 350A Orange SB350 6400G1
TER3250 ??? 67.4 350A Yellow SB350 6323G1
TER3260 083.600.509.430 67.4 350A Green SB350 6324G1

116
 Connectors and Terminals
Anderson Connector Handles

TER3102 TER3103
175A Connectors 175A Connectors

WA Ref PSH Description Connector Series Anderson Ref

TER3102 083.600.478.430 Grey handle for 175A connectors. Includes fixing hardware. SB175, SBE160 995G1
TER3103 083.600.479.430 Red handle for 175A connectors. Includes fixing hardware. SB175, SBE160 995G3

Anderson Connector Replacement Terminals

Replacement terminals for Anderson Connectors. Sold in pairs.

TER3109 TER3105 TER3104

13.0mm² · SB50 33.6mm² · SB175 53.5mm² · SB175

WA Ref PSH Conductor size (mm2) Connector Series Anderson Ref

TER3109 083.600.485.430 13.0mm2 SB50 5900BK
TER3105 083.600.481.430 33.6mm2 SB175 947
TER3104 083.600.480.430 53.5mm2 SB175 944

117
 Connectors and Terminals
Anderson Connector Accessories

TER3091 TER3101 TER3201 TER3301

Black Terminal Cover for 50A Connectors Red Terminal Cover for 175A Connectors Red Terminal Cover for 350A Connectors Auxiliary Twin Contact Set for SBE160

WA Ref PSH Description Connector Series Anderson Ref

TER3091 083.600.475.430 Black terminal cover for 50A connectors. SB50 134G1
TER3101 083.600.477.430 Red terminal cover for 175A connectors. 2 pole. SB175 134G2
TER3201 083.600.504.430 Red terminal cover for 350A connectors. 2 pole. SB350 134G3
TER3301 083.600.510.430 Auxiliary twin contact kit for SBE160. Includes two cable ties (not shown). SBE160 6344

Brass Bullet Terminals and Connectors

Sold in packs of 100.

TER5010 TER5020 TER5030 TER5040

WA Ref PSH Conductor Size (mm2) Fits Cable Notes Pack Quantity
TER5010 083.600.534.430 1.0 14/0.3mm Crimp Terminals 100
TER5020 083.600.535.430 2.0 28/0.3mm Crimp Terminals 100
TER5030 083.600.536.430 - - Single Connector 100
TER5040 083.600.537.430 - - Double Connector 100

118
 Connectors and Terminals
Flexible Cable Connector
Sold in packs of 10.

WA Ref PSH Fits Cables (mm2) Amperage (A) Size Pack Quantity
TER6103 083.600.542.430 Up to 2.5 3 12-way 10
TER6105 083.600.543.430 Up to 4.0 5 12-way 10
TER6115 083.600.544.430 Up to 10.0 15 12-way 10
TER6130 083.600.545.430 Up to 16.0 30 12-way 10

Superseal Connectors
Includes seals and terminals. Crimp tool: TEM2135
Sold individually.

TER6201M TER6201F TER6202M TER6202F

1-way, Male 1-way, Female 2-way, Male 2-way, Female

TER6203M TER6203F TER6204M TER6204F

3-way, Male 3-way, Female 4-way, Male 4-way, Female

TER6205M TER6205F TER6206M TER6206F

5-way, Male 5-way, Female 6-way, Male 6-way, Female

Male Connectors Female Connectors

WA Ref PSH Size Type WA Ref PSH Size Type
TER6201M 083.600.551.430 1-way Male TER6201F 083.600.550.430 1-way Female
TER6202M 083.600.554.430 2-way Male TER6202F 083.600.552.430 2-way Female
TER6203M 083.600.557.430 3-way Male TER6203F 083.600.556.430 3-way Female
TER6204M 083.600.560.430 4-way Male TER6204F 083.600.558.430 4-way Female
TER6205M 083.600.562.430 5-way Male TER6205F 083.600.561.430 5-way Female
TER6206M 083.600.564.430 6-way Male TER6206F 083.600.563.430 6-way Female

119
 Connectors and Terminals
Econoseal Connectors
Includes seals and terminals. Crimp tool: TEM2135
Sold individually.

TER6212M TER6212F TER6213M TER6213F

2-way, Male 2-way, Female 3-way, Male 3-way, Female

Male Connectors Female Connectors

WA Ref PSH Size Type WA Ref PSH Size Type
TER6212M 083.600.566.430 2-way Male TER6212F 083.600.565.430 2-way Female
TER6213M 083.600.568.430 3-way Male TER6213F 083.600.567.430 3-way Female

Deutsch Connectors
Includes seals and terminals. Crimp tool: TEM2154
Sold individually.

TER6402M TER6402F TER6403M TER6403F

2-way, Male 2-way, Female 3-way, Male 3-way, Female

TER6404M TER6404F TER6406M TER6406F

4-way, Male 4-way, Female 6-way, Male 6-way, Female

Male Connectors Female Connectors

WA Ref PSH Size Type WA Ref PSH Size Type
TER6402M 083.600.598.430 2-way Male TER6402F 083.600.597.430 2-way Female
TER6403M 083.600.600.430 3-way Male TER6403F 083.600.599.430 3-way Female
TER6404M 083.600.602.430 4-way Male TER6404F 083.600.601.430 4-way Female
TER6406M 083.600.604.430 6-way Male TER6406F 083.600.603.430 6-way Female

120
 Connectors and Terminals
Deutsch Connector Adapter
3-pin 1-male to 2-male adapter. Fits TER6403F
Sold individually.

TER6433

WA Ref PSH Description

TER6433 083.600.610.430 3-pin 1-male to 2-male adapter. Connects 3xTER6403F terminals.

Schlemmer Socket Kit

For Volvo and Mercedes combination lamps.

TER6410

WA Ref PSH Terminal Type

TER6410 083.600.607.430 7-pin female socket, right angle or straight cable exit.

121
 Connectors and Terminals
Alternator Harness Plugs

EC5725 EC5758 EC5796

Ford Alternator Plug Denso Alternator Plug Denso Alternator Plug Kit
3 Pin with 300mm lead 4 Pin with 150mm lead 4 Pin

EC5755 EC5801 EC5756

Denso / Mitsubishi Plug Denso / Mitsubishi Plug Kit Hitachi / Mitsubishi Alternator Plug
3 Pin Oval with 150mm lead 3 Pin Oval 2 Pin with lead

EC5802 EC5760 EC5803

Hitachi / Mitsubishi Alternator Plug Kit Denso Alternator Plug Denso Alternator Plug
2 Pin 3 Pin with 150mm lead 4 Pin with 150mm lead

WA Ref PSH Plug / Kit Lead (mm) Pin Count Alternator OE Vehicle Applications
EC5725 021.100.185.800 Plug 300mm 3 Ford Ford
EC5758 021.100.211.802 Plug 150mm 4 Denso Toyota, Honda
EC5796 021.100.223.800 Kit · 4 Denso Toyota, Honda
EC5755 021.100.169.801 Plug 150mm 3 Denso / Mitsubishi Mitsubishi, Landrover, Toyota, Kubota, ...
EC5801 021.100.228.800 Kit · 3 Denso / Mitsubishi Mitsubishi, Landrover, Toyota, Kubota, ...
EC5756 021.100.170.800 Plug 100mm 2 Hitachi / Mitsubishi Mitsubishi, Nissan, Toyota, Mazda PD, ...
EC5802 021.100.229.800 Kit · 2 Hitachi / Mitsubishi Mitsubishi, Nissan, Toyota, Mazda PD, ...
EC5760 021.100.174.800 Plug 150mm 3 Denso Jaguar, Toyota, Suzuki, ...
EC5803 021.100.230.800 Plug 150mm 4 Denso Vauxhall, Isuzu, Honda, Rover, ...

122
 Connectors and Terminals
Alternator Harness Plugs

EC5804 EC5750 EC5759

Hitachi Alternator T-Plug Mitsubishi / Mando Alternator Plug Bosch NCB2 / Mitsubishi 24V Alternator Plug
With lock tab and 150mm lead 2 Pin with 300mm lead 5 Pin with lead

EC5778 EC5753 EC5757

Bosch NCB2 / Mitsubishi 24V Alternator Plug Kit Bosch / Delphi Alternator Plug Hitachi / Mitsubishi Alternator Plug
5 Pin 2 Pin with 150mm lead 4 Pin with 150mm lead

EC5779 EC5781 EC5782

Bosch / Valeo Alternator Plug Bosch / Valeo Alternator Plug Bosch / Valeo Alternator Plug
2 Pin with 300mm lead 1 Pin with 1 lead 2 Pin with 2 leads

WA Ref PSH Plug / Kit Lead (mm) Pin Count Alternator OE Vehicle Applications
EC5804 021.100.231.800 Plug 150mm 2 Hitachi Various
EC5750 021.100.163.800 Plug 300mm 2 Mitsubishi / Mando Daewoo, Mando Plant, Marine applications, ...
EC5759 021.100.173.800 Plug 70mm 5 Bosch / Mitsubishi 24V Commercial applications.
EC5778 021.100.195.800 Kit · 5 Bosch / Mitsubishi 24V Commercial applications.
EC5753 021.100.211.804 Plug 150mm 2 Bosch / Delphi L-RVC type connections and Vauxhall L-DFM.
EC5757 021.100.171.800 Plug 150mm 4 Hitachi / Mitsubishi Hyundai, Mitsubishi application with C terminal.
EC5779 021.100.196.800 Plug 300mm 2 Bosch / Valeo Renault, Peugeot L-DFM type alternators.
EC5781 021.100.198.800 Plug 300mm 1 Bosch / Valeo Ford Transit 2001+ LIN2
EC5782 021.100.199.800 Plug 300mm 2 Bosch / Valeo Audi,VW, Mercedes, Rover, ...

123
 Connectors and Terminals
Alternator Harness Plugs

EC5780 EC5784 EC5783

Bosch / Valeo Alternator Plug Kit Bosch / Valeo Alternator Plug Bosch / Valeo Alternator Plug Kit
2 Pin 2 Pin with 300mm lead 2 Pin

P L I S

EC5786 EC5785 EC5791

Bosch / Valeo Alternator Plug Bosch / Valeo Alternator Plug Kit Delco Alternator Plug
2 Pin with 300mm lead 2 Pin 4 Pin with 4 x 200mm leads

S I L

EC5764 EC5754 EC5795

Bosch / Valeo Alternator Plug Bosch / Valeo Alternator Plug Delco Alternator Plug
2 Pin with 1 x 300mm lead 3 Pin with 3 x 300mm leads 4 Pin with 3 leads

WA Ref PSH Plug / Kit Lead (mm) Pin Count Alternator OE Vehicle Applications
EC5780 021.100.197.800 Kit · 2 Bosch / Valeo Audi,VW, Mercedes, Rover, Ford, ...
EC5784 021.100.212.800 Plug 300mm 2 Bosch / Valeo Landrover, Mercedes, BMW, L-DFM connections.
EC5783 021.100.200.800 Kit · 2 Bosch / Valeo Landrover, Mercedes, BMW, L-DFM connections.
EC5786 021.100.214.800 Plug 300mm 2 Bosch / Valeo Mercedes, BMW, Audi, LIN-COM and COM-DFM.
EC5785 021.100.213.800 Kit · 2 Bosch / Valeo Mercedes, BMW, Audi, LIN-COM and COM-DFM.
EC5791 021.100.218.800 Plug 4 x 200mm 4 Delco Caterpillar, Chevrolet, Daewoo, ...
EC5764 021.100.178.800 Plug 1 x 300mm 2 Bosch / Valeo Renault COM type.
EC5754 021.100.167.800 Plug 3 x 300mm 3 Bosch / Valeo BMW, Range Rover.
EC5795 021.100.222.800 Plug 3 x 300mm 4 Delco Chevrolet, Cummins,Vauxhall, ...

124
 Connectors and Terminals
Alternator Harness Plugs

S I L P
A S I F1 F2

EC5762 EC5797 EC5752

Delco Alternator Plug Ford US D-Type Alternator Plug Chrysler Alternator Plug
4 Pin with 4 leads 3 Pin with 300mm leads 2 Pin with 300mm lead

F1 F2

EC5800 EC5767 EC5798

Bosch / Valeo Alternator Plug Chrysler Alternator Plug Japanese Type Voltage Regulator Connector
2 Pin with 150mm lead 2 Pin with 300mm lead 6 Pin Female Socket with 150mm leads

WA Ref PSH Plug / Kit Lead (mm) Pin Count Alternator OE Vehicle Applications
EC5762 021.100.176.800 Plug 4 x 100mm 4 Delco Chevrolet, Cummins,Vauxhall, ...
EC5797 021.100.224.800 Plug 3 x 300mm 3 Ford US Ford US, Lincoln, ...
EC5752 021.100.165.800 Plug 300mm 2 Chrysler Chrysler US, Jeep Cherokee, Jeep Wrangler, ...
EC5800 021.100.227.800 Plug 150mm 2 Bosch / Valeo Audi, Ford, LDV,VW, ...
EC5767 021.100.181.800 Plug 2 x 300mm 2 Chrysler Chrysler US.
EC5798 021.100.225.800 Plug 6 x 150mm 6 Japanese OE External voltage regulators.

125
 Connectors and Terminals
20 Piece Alternator Plug Set
Ideal addition for alternator test benches or regulator testers.

EC5725 EC5758 EC5755 EC5756 EC5760

EC5803 EC5804 EC5750 EC5753 EC5757

EC5779 EC5786 EC5791 EC5764 EC5754

EC5762 EC5797 EC5752 EC5800 EC5767

WA Ref PSH Description

EC5827 021.100.233.800 20 Piece Alternator Plug Set.

126
 Connectors and Terminals
Alternator Harness Conversion and Extension Leads

EC5768 EC5769 EC5773

Converts early Hitachi T-shaped plug to Converts Denso 3-pin oval to 3-pin round plugs Ford Alternator extension plug
later style rectangular plug 150mm lead Male to female
150mm lead

EC5826
Ford Transit Connect Alternator wiring harness
Replaces Ford 4998243.

WA Ref PSH Lead Type Plug 1 Plug 2 Lead (mm) Notes

EC5768 021.100.186.800 Conversion T-shape Plug Rectangular Socket 150mm
EC5769 021.100.187.800 Conversion 3-pin Oval Socket 3-pin Round Plug 150mm
EC5773 021.100.191.800 Extension Ford Plug Ford Socket 150mm
EC5826 021.100.232.800 Conversion Ford Socket Ford Socket · Replaces Ford 4998243

127
 Connectors and Terminals
Nylon Connector Blocks

TER6301M TER6302M TER6302TM TER6301F TER6302F TER6302TF

1-way, Male 2-way, Male 2-way, T-Male 1-way, Female 2-way, Female 2-way, T-Female

TER6303M TER6304M TER6306M TER6303F TER6304F TER6306F

3-way, Male 4-way, Male 6-way, Male 3-way, Female 4-way, Female 6-way, Female

TER6308M TER6311M TER6308F TER6311F

8-way, Male 11-way, Male 8-way, Female 11-way, Female

Male Female
WA Ref PSH Type Size Pack WA Ref PSH Type Size Pack
TER6301M 083.600.570.430 Male 1-way 10 TER6301F 083.600.569.430 Female 1-way 10
TER6302M 083.600.572.430 Male 2-way 10 TER6302F 083.600.571.430 Female 2-way 10
TER6302TM 083.600.574.430 T-Male 2-way 10 TER6302TF 083.600.573.430 T-Female 2-way 10
TER6303M 083.600.577.430 Male 3-way 10 TER6303F 083.600.575.430 Female 3-way 10
TER6304M 083.600.579.430 Male 4-way 10 TER6304F 083.600.578.430 Female 4-way 10
TER6306M 083.600.582.430 Male 6-way 10 TER6306F 083.600.580.430 Female 6-way 10
TER6308M 083.600.585.430 Male 8-way 10 TER6308F 083.600.584.430 Female 8-way 10
TER6311M 083.600.588.430 Male 11-way 5 TER6311F 083.600.587.430 Female 11-way 5

Terminals for Connector Blocks

TER6350 TER6351

WA Ref PSH Description Pack Quantity

TER6301M 083.600.570.430 6.3mm Male Spade 50
TER6302M 083.600.572.430 6.3mm Female Connector 50

128
 Connectors and Terminals
Mate-N-Lock Connectors

TER6502M TER6503M TER6506M TER6502F TER6503F TER6506F

2-way, Male 3-way, Male 6-way, Male 2-way, Female 3-way, Female 6-way, Female

TER6509M TER6512M TER6515M TER6509F TER6512F TER6515F

9-way, Male 12-way, Male 15-way, Male 9-way, Female 12-way, Female 15-way, Female

Male Female
WA Ref PSH Type Size Pack WA Ref PSH Type Size Pack
TER6502M 083.600.612.430 Male 2-way 10 TER6502F 083.600.611.430 Female 2-way 10
TER6503M 083.600.614.430 Male 3-way 10 TER6503F 083.600.613.430 Female 3-way 10
TER6506M 083.600.616.430 Male 6-way 10 TER6506F 083.600.615.430 Female 6-way 10
TER6509M 083.600.618.430 Male 9-way 10 TER6509F 083.600.617.430 Female 9-way 10
TER6512M 083.600.620.430 Male 12-way 10 TER6512F 083.600.619.430 Female 12-way 10
TER6515M 083.600.622.430 Male 15-way 10 TER6515F 083.600.621.430 Female 15-way 10

Mate-N-Lock Connector Terminals

TER6550 TER6551
Male Female

WA Ref PSH Description Pack Quantity

TER6550 083.600.623.430 Mate-N-Lock Male Terminal 50
TER6551 083.600.624.430 Mate-N-Lock Female Terminal 50

129
 Connectors and Terminals
Copper Tube Terminals
Bell-mouth easy cable entry.
Bright electro-tin plating to BS1872.
Inspection hole to check correct insertion.
Suitable for crimping or soldering.
Pack Quantity: 10

WA Ref PSH Cable Size Max Cable Ø Stud Size WA Ref PSH Cable Size Max Cable Ø Stud Size
(mm2) (mm) (mm) (mm2) (mm) (mm)
CTT0404 083.600.206.430 4.0 3.2 4.0 CTT7006 083.600.292.430 70.0 11.5 6.0
CTT0405 083.600.207.430 4.0 3.2 5.0 CTT3506 083.600.270.430 35.0 8.2 6.0
CTT0406 083.600.208.430 4.0 3.2 6.0 CTT3508 083.600.273.430 35.0 8.2 8.0
CTT3510 083.600.275.430 35.0 8.2 10.0
CTT0604 083.600.209.430 6.0 4.2 4.0 CTT3512 083.600.277.430 35.0 8.2 12.0
CTT0605 083.600.210.430 6.0 4.2 5.0
CTT0606 083.600.211.430 6.0 4.2 6.0 CTT5006 083.600.282.430 50.0 9.5 6.0
CTT0608 083.600.213.430 6.0 4.2 8.0 CTT5008 083.600.284.430 50.0 9.5 8.0
CTT5010 083.600.287.430 50.0 9.5 10.0
CTT1005 083.600.215.430 10.0 4.5 5.0 CTT5012 083.600.289.430 50.0 9.5 12.0
CTT1006 083.600.217.430 10.0 4.5 6.0
CTT1008 083.600.219.430 10.0 4.5 8.0 CTT7008 083.600.293.430 70.0 11.5 8.0
CTT1010 083.600.221.430 10.0 4.5 10.0 CTT7010 083.600.295.430 70.0 11.5 10.0
CTT1012 083.600.223.430 10.0 4.5 12.0 CTT7012 083.600.298.430 70.0 11.5 12.0

CTT1605 083.600.237.430 16.0 5.5 5.0 CTT9508 083.600.303.430 95.0 13.4 8.0
CTT1606 083.600.239.430 16.0 5.5 6.0 CTT9510 083.600.305.430 95.0 13.4 10.0
CTT1608 083.600.241.430 16.0 5.5 8.0 CTT9512 083.600.307.430 95.0 13.4 12.0
CTT1610 083.600.243.430 16.0 5.5 10.0 CTT9514 083.600.309.430 95.0 13.4 14.0
CTT1612 083.600.245.430 16.0 5.5 12.0
CTT12008 083.600.225.430 120.0 15.0 8.0
CTT2505 083.600.256.430 25.0 7.0 5.0 CTT12010 083.600.226.430 120.0 15.0 10.0
CTT2506 083.600.258.430 25.0 7.0 6.0 CTT12012 083.600.228.430 120.0 15.0 12.0
CTT2508 083.600.260.430 25.0 7.0 8.0
CTT2510 083.600.262.430 25.0 7.0 10.0 CTT15010 083.600.232.430 150.0 16.5 10.0
CTT2512 083.600.264.430 25.0 7.0 12.0 CTT15012 083.600.233.430 150.0 16.5 12.0

130
 Connectors and Terminals
Copper Tube Terminals (Long Barrel)
Bell-mouth easy cable entry.
Bright electro-tin plating to BS1872.
Inspection hole to check correct insertion.
Suitable for crimping or soldering.
Pack Quantity: 10

WA Ref PSH Cable Size Max Cable Ø Stud Size WA Ref PSH Cable Size Max Cable Ø Stud Size
(mm2) (mm) (mm) (mm2) (mm) (mm)
CTT0605L ??? 6.0 4.2 5.0 CTT3506L 083.600.272.430 35.0 8.2 6.0
CTT0606L 083.600.212.430 6.0 4.2 6.0 CTT3508L 083.600.274.430 35.0 8.2 8.0
CTT0608L 083.600.214.430 6.0 4.2 8.0 CTT3510L 083.600.276.430 35.0 8.2 10.0
CTT3512L 083.600.278.430 35.0 8.2 12.0
CTT1005L 083.600.216.430 10.0 4.5 5.0
CTT1006L 083.600.218.430 10.0 4.5 6.0 CTT5006L 083.600.283.430 50.0 9.5 6.0
CTT1008L 083.600.220.430 10.0 4.5 8.0 CTT5008L 083.600.286.430 50.0 9.5 8.0
CTT1010L 083.600.222.430 10.0 4.5 10.0 CTT5010L 083.600.288.430 50.0 9.5 10.0
CTT5012L 083.600.290.430 50.0 9.5 12.0
CTT1605L 083.600.238.430 16.0 5.5 5.0
CTT1606L 083.600.240.430 16.0 5.5 6.0 CTT7008L 083.600.294.430 70.0 11.5 8.0
CTT1608L 083.600.242.430 16.0 5.5 8.0 CTT7010L 083.600.297.430 70.0 11.5 10.0
CTT1610L 083.600.244.430 16.0 5.5 10.0 CTT7012L 083.600.300.430 70.0 11.5 12.0

CTT2506L 083.600.259.430 25.0 7.0 6.0 CTT9508L 083.600.304.430 95.0 13.4 8.0
CTT2508L 083.600.261.430 25.0 7.0 8.0 CTT9510L 083.600.306.430 95.0 13.4 10.0
CTT2510L 083.600.263.430 25.0 7.0 10.0 CTT9512L 083.600.308.430 95.0 13.4 12.0
CTT2512L 083.600.265.430 25.0 7.0 12.0

Crimp Tools
See Workshop Tools for our range of copper tube terminal crimp tools.

TEM2131 TEM2132 TEM2133

021.000.211.600 021.000.212.600 021.000.213.600
6.0-50mm² · Hexagonal crimp · Length: 390mm 10-95mm² · Length: 580mm 16-120mm² · Hexagonal crimp

TEM2134
021.000.214.600
16-120mm² · Crimp by hammer or vice

131
 Connectors and Terminals
Copper Tube Terminal Covers A
Push on terminal covers suitable for use with a variety of copper tube terminals. C
Supplied in packs of 10.
B

TER7110B TER7112B

TER7111B TER7111R TER7113B TER7113R

TER7114B TER7114R TER7115B TER7115R

TER7116B TER7116R TER7117B TER7117R

WA Ref PSH Internal Sleeve Internal Cap Internal Cap

Colour Material
Diameter A (mm) Diameter B (mm) Depth C (mm)
TER7110B 083.600.657.430 6.5 10.5 11.5 Black Rubber
TER7112B 083.600.660.430 9 15.5 22.5 Black Rubber
TER7111B 083.600.658.430 8 15.5 17.0 Black Rubber
TER7111R 083.600.659.430 8 15.5 17.0 Red Rubber
TER7113B 083.600.661.430 17 25 x 38 18.5 Black PVC
TER7113R 083.600.662.430 17 25 x 38 18.5 Red PVC
TER7114B 083.600.663.430 4-6 13 18.5 Black PVC
TER7114R 083.600.664.430 4-6 13 18.5 Red PVC
TER7115B 083.600.665.430 8 - 12 19 20.0 Black PVC
TER7115R 083.600.666.430 8 - 12 19 20.0 Red PVC
TER7116B 083.600.667.430 14 - 20 30 33.0 Black PVC
TER7116R 083.600.668.430 14 - 20 30 33.0 Red PVC
TER7117B 083.600.669.430 20 - 26 35 38.0 Black PVC
TER7117R 083.600.670.430 20 - 26 35 38.0 Red PVC

132
 Connectors and Terminals
Butt Splice Terminals Open End Terminals
Bell-mouth easy cable entry. Bell-mouth entry for ease of cable insertion.
Inspection hole to check correct insertion. Suitable for crimping and soldering.
Suitable for crimping. Pack Quantity: 10
Pack Quantity: 10

WA Ref PSH Cable Size Max Cable Ø WA Ref PSH Cable Size Max Cable Ø Ring Size
(mm2) (mm) (mm2) (mm) (mm)
CBC1006 083.600.194.430 6 4.0 OET1006 083.600.321.430 10 4.5 6.0
CBC1010 083.600.195.430 10 4.5 OET1008 083.600.322.430 10 4.5 8.0
CBC1016 083.600.196.430 16 5.5
CBC1025 083.600.197.430 25 6.7 OET1606 083.600.324.430 16 5.5 6.0
CBC1035 083.600.198.430 35 8.4 OET1608 083.600.325.430 16 5.5 8.0
CBC1050 083.600.199.430 40-50 9.5 OET1610 083.600.326.430 16 5.5 10.0
CBC1070 083.600.200.430 60-70 11.5
OET2506 083.600.327.430 25 8.0 6.0
OET2508 083.600.328.430 25 8.0 8.0
OET2510 083.600.329.430 25 8.0 10.0

OET3508 083.600.330.430 35 9.5 8.0

OET5008 083.600.332.430 50 11.7 8.0

OET7008 083.600.334.430 70 13.5 8.0

Crimp Tools
See Workshop Tools for our range of copper tube terminal crimp tools.

TEM2131 TEM2132 TEM2133

021.000.211.600 021.000.212.600 021.000.213.600
6.0-50mm² · Hexagonal crimp · Length: 390mm 10-95mm² · Length: 580mm 16-120mm² · Hexagonal crimp

TEM2134
021.000.214.600
16-120mm² · Crimp by hammer or vice

133
 Connectors and Terminals
Junction Boxes

BRI3540.00 BRIE05.00

WA Ref PSH Description

BRI3540.00 087.200.001.600 8-way Junction Box. Weatherproof. Screw-type fittings.
BRIE05.00 087.200.002.600 10-way Junction Box. Weatherproof with hinged lid. Supplied with various grommets.

M108 Junction Box

8-way junction box.
Four cable entry points adjustable from Ø6mm to Ø13mm. Fixing centres: 47mm
Dimensions (L x W x H): 74 x 102 x 38mm

RUB108/01/00

WA Ref PSH Description

RUB108/01/00 087.200.003.600 8-way Junction Box

134
 Connectors and Terminals
M111 Junction Boxes
Dimensions (L x W x H): 167 x 101 x 47mm Mounting: 2xM5 studs 24mm apart

RUB111/01/00
Single height (47mm)

WA Ref PSH Height Inc Terminal Block Size Notes

RUB111/01/00 087.200.004.600 Single (47mm) No - Box only
RUB111/01/01 087.200.005.600 Single (47mm) Yes 8-way Screw terminals
RUB111/01/02 087.200.006.600 Single (47mm) Yes 16-way (2x8-way) Screw terminals

M120 Junction Boxes

6.3mm spade terminals.

RUB120/01/02 RUB120/07/02
Single height (60mm) Double height (86mm)

WA Ref PSH Height Dimensions (L x W x D mm) Ports Description

RUB120/01/02 087.200.012.600 Single (60mm) 168 x 110 x 60mm 8 8 way junction box, single height
RUB120/07/02 087.200.013.600 Double (86mm) 168 x 110 x 86mm 16 16 way junction box, double height

135
 Connectors and Terminals
Busbars and Covers

TER7000 TER7001 TER7002 TER7003

4x6mm Studs, 100A 4x6mm Studs, 150A 4x8mm Studs, 250A 6x6mm Studs, 150A

TER7010 TER7011 TER7012 TER7013

2x5mm Studs, 5x4mm Screws, 100A 2x5mm Studs, 10x4mm Screws, 150A 2x6mm Studs, 12x4mm Screws, 250A 2x6mm Studs, 20x4mm Screws, 150A

TER7020 TER7021 TER7022 TER7023

Cover for 100A busbars Cover for 150A busbars Cover for 250A busbars Cover for long 150A busbars

WA Ref PSH Description

TER7000 083.600.625.430 4 x 6mm Studs, 100A
TER7001 083.600.626.430 4 x 6mm Studs, 150A
TER7002 083.600.627.430 4 x 8mm Studs, 250A
TER7003 083.600.628.430 6 x 6mm Studs, 150A
TER7010 083.600.629.430 2x5mm Studs, 5 x 4mm Screws, 100A
TER7011 083.600.630.430 2x5mm Studs, 10 x 4mm Screws, 150A
TER7012 083.600.631.430 2x6mm Studs, 12 x 4mm Screws, 250A
TER7013 083.600.632.430 2x6mm Studs, 20 x 4mm Screws, 150A
TER7020 083.600.633.430 Cover for 100A Busbars
TER7021 083.600.634.430 Cover for 150A Busbars
TER7022 083.600.635.430 Cover for 250A Busbars
TER7023 083.600.636.430 Cover for 150A Extra Long Busbars

136
 Connectors and Terminals
Distribution Posts and Jointing Boxes
Glass fibre reinforced nylon base. Stainless steel studs and nickel plated brass nuts.
Stud side: M8 Continuous Rating: 150A

TER7040R TER7040B TER7050 TER7051

8mm Stud, Red 8mm Stud, Black 2x8mm Studs, 120A 3x8mm Studs, 120A

WA Ref PSH Description Dimensions (H x W x D)

TER7040R 083.600.641.430 Distribution Post, 8mm Stud, 150A, Red +ve
TER7040B 083.600.640.430 Distribution Post, 8mm Stud, 150A, Black -ve
TER7050 083.600.642.430 Power Jointing Box, 2 Way 35 x 61 x 40mm
TER7051 083.600.643.430 Power Jointing Box, 3 Way 45 x 70 x 57mm

137
 Connectors and Terminals
Crocodile Clips

CRC1005 CRC1025 CRC1050

5A Crocodile Clip 25A Crocodile Clip 50A Crocodile Clip

CRC1100 CRC1101 CRC1200

180A Red Positive Heavy Duty Crocodile Clip 180A Black Negative Heavy Duty Crocodile Clip 310A Red Positive Heavy Duty Crocodile Clip

CRC1201 CRC1300 CRC1301

310A Black Negative Heavy Duty Crocodile Clip 500A Red Positive Heavy Duty Crocodile Clip 500A Black Negative Heavy Duty Crocodile Clip

WA Ref PSH Max Current (A) Length (mm) Description Pack Qty
CRC1005 083.200.001.430 5A 40mm 5A crocodile clip 10
CRC1025 083.200.002.430 25A 75mm 25A crocodile clip 10
CRC1050 083.200.003.430 50A 95mm 50A crocodile clip 10
CRC1100 083.200.004.430 180A 195mm 180A red positive heavy duty crocodile clip. Fully insulated. 1
CRC1101 083.200.005.430 180A 195mm 180A black negative heavy duty crocodile clip. Fully insulated. 1
CRC1200 083.200.006.430 310A 195mm 310A red positive heavy duty crocodile clip. Fully insulated. 1
CRC1201 083.200.007.430 310A 195mm 310A black negative heavy duty crocodile clip. Fully insulated. 1
CRC1300 083.200.008.430 500A 200mm 500A red positive heavy duty crocodile clip. Fully insulated. Angled jaws. 1
CRC1301 083.200.009.430 500A 200mm 500A black negative heavy duty crocodile clip. Fully insulated. Angled jaws. 1

138
 Fuses
Blade Fuses
Actual size drawings

50

15 15
20
5 30

Low Profile Mini Mini Micro2 Micro3 Standard / ATO Maxi

10.9 x 3.81 x 8.73mm 10.9 x 3.6 x 16.3mm 9.1 x 3.8 x 15.3mm 14.4 x 4.2 x 18.1mm 19.1 x 5.1 x 18.5mm 29.2 x 8.5 x 34.3mm

Low-Profile Mini Blade

Pack Quantity: 10 With inspection openings.
L: 10.9mm W: 3.81mm H: 8.73mm

FUS2602 FUS2603 FUS2604 FUS2605 FUS2607

2A 3A 4A 5A 7.5A

FUS2610 FUS2615 FUS2620 FUS2625 FUS2630

10A 15A 20A 25A 30A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS2602 087.000.143.430 GREY 2 FUS2610 087.000.148.430 RED 10
FUS2603 087.000.144.430 VIOLET 3 FUS2615 087.000.149.430 BLUE 15
FUS2604 087.000.145.430 PINK 4 FUS2620 087.000.150.430 YELLOW 20
FUS2605 087.000.146.430 TAN 5 FUS2625 087.000.151.430 NATURAL 25
FUS2607 087.000.147.430 BROWN 7.5 FUS2630 087.000.152.430 GREEN 30

139
 Fuses
Mini Blade
Pack Quantity: 20 With inspection openings.
L: 10.9mm W: 3.6mm H: 16.3mm

FUS102 FUS103 FUS104 FUS105 FUS107

2A 3A 4A 5A 7.5A

FUS1010 FUS1015 FUS1020 FUS1025 FUS1030

10A 15A 20A 25A 30A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS102 087.000.013.430 GREY 2 FUS1010 087.000.009.430 RED 10
FUS103 087.000.017.430 VIOLET 3 FUS1015 087.000.011.430 BLUE 15
FUS104 087.000.019.430 PINK 4 FUS1020 087.000.014.430 YELLOW 20
FUS105 087.000.020.430 TAN 5 FUS1025 087.000.016.430 NATURAL 25
FUS107 087.000.021.430 BROWN 7.5 FUS1030 087.000.018.430 GREEN 30

Micro2 Blade
Pack Quantity: 10 With inspection openings.
2-pin. L: 9.1mm W: 3.8mm H: 15.3mm

FUS3105 FUS3107 FUS3110 FUS3115

5A 7.5A 10A 15A

FUS3120 FUS3125 FUS3130

20A 25A 30A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS3105 087.000.167.430 TAN 5 FUS3120 087.000.171.430 YELLOW 20
FUS3107 087.000.168.430 BROWN 7.5 FUS3125 087.000.172.430 WHITE 25
FUS3110 087.000.169.430 RED 10 FUS3130 087.000.173.430 GREEN 30
FUS3115 087.000.170.430 BLUE 15

140
 Fuses
Micro3 Blade
Pack Quantity: 10 With inspection openings.
3-pin. L: 14.4mm W: 4.2mm H: 18.1mm

FUS3005 FUS3007 FUS3010 FUS3015

5A 7.5A 10A 15A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS3005 087.000.163.430 TAN 5 FUS3010 087.000.165.430 RED 10
FUS3007 087.000.164.430 BROWN 7.5 FUS3015 087.000.166.430 BLUE 15

Mercedes-Benz MultiOTO Fuse Blade

A specialist multi-element fuse with one input and six outputs terminals. This allows six circuits to be fused in the smallest possible
space. These fuses are currently used in various models from Mercedes-Benz.

Pack Quantity: 1 With inspection openings.

1 input pin and 6 output pins. L: 40mm W: 5mm H: 28.2mm

FUS3205 FUS3207
5A 7.5A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS3205 087.000.174.430 TAN 5A x 6 FUS3207 087.000.175.430 BROWN 7.5A x 6

141
 Fuses
Standard ATO Blade
Pack Quantity: 50 With inspection openings.
L: 19.1mm W: 5.1mm H: 16.3mm

FUS111 FUS112 FUS113 FUS114 FUS115 FUS117

1A 2A 3A 4A 5A 7.5A

FUS1110 FUS1115 FUS1120 FUS1125 FUS1130 FUS1140

10A 15A 20A 25A 30A 40A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS111 087.000.023.430 BLACK 1 FUS1110 087.000.024.430 RED 10
FUS112 087.000.027.430 GREY 2 FUS1115 087.000.026.430 BLUE 15
FUS113 087.000.031.430 VIOLET 3 FUS1120 087.000.028.430 YELLOW 20
FUS114 087.000.034.430 PINK 4 FUS1125 087.000.029.430 NATURAL 25
FUS115 087.000.036.430 TAN 5 FUS1130 087.000.032.430 GREEN 30
FUS117 087.000.037.430 BROWN 7.5 FUS1140 087.000.035.430 ORANGE 40

Circuit Breaker Standard ATO Blade

Pack Quantity: 1 Replaces regular ATO blade fuse.
Thermal

FUS165 FUS168 FUS1610 FUS1615

5A 7.5A 10A 15A

FUS1620 FUS1625 FUS1630

20A 25A 30A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS165 087.000.082.430 TAN 5 FUS1620 087.000.079.430 YELLOW 20
FUS168 087.000.083.430 BROWN 7.5 FUS1625 087.000.080.430 WHITE 25
FUS1610 087.000.077.430 RED 10 FUS1630 087.000.081.430 GREEN 30
FUS1615 087.000.078.430 BLUE 15

142
 Fuses
Maxi Blade
Pack Quantity: 1
L: 29.2mm W: 8.5mm H: 34.3mm

FUS1220 FUS1230 FUS1240 FUS1250

20A 30A 40A 50A

FUS1260 FUS1270 FUS1280 FUS12100

60A 70A 80A 100A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS1220 087.000.041.430 YELLOW 20 FUS1260 087.000.046.430 BLUE 60
FUS1230 087.000.042.430 GREEN 30 FUS1270 087.000.047.430 BROWN 70
FUS1240 087.000.044.430 ORANGE 40 FUS1280 087.000.048.430 NATURAL 80
FUS1250 087.000.045.430 RED 50 FUS12100 087.000.039.430 VIOLET 100

Midi Link (BF1)

Pack Quantity: 1

FUS1330 FUS1340 FUS1350 FUS1360 FUS1370

30A 40A 50A 60A 70A

FUS1380 FUS13100 FUS13125 FUS13150 FUS13200

80A 100A 125A 150A 200A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS1330 087.000.054.430 ORANGE 30 FUS1380 087.000.060.430 WHITE 80
FUS1340 087.000.055.430 GREEN 40 FUS13100 087.000.050.430 BLUE 100
FUS1350 087.000.057.430 RED 50 FUS13125 087.000.051.430 PINK 125
FUS1360 087.000.058.430 YELLOW 60 FUS13150 087.000.052.430 GREY 150
FUS1370 087.000.059.430 BROWN 70 FUS13200 087.000.053.430 VIOLET 200

143
 Fuses
Mega Link (BF2)
Pack Quantity: 1

FUS14100 FUS14125 FUS14150 FUS14175 FUS14200

100A 125A 150A 175A 200A

FUS14225 FUS14250 FUS14300 FUS14400 FUS14500

225A 250A 300A 400A 500A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS14100 087.000.061.430 YELLOW 100 FUS14225 087.000.066.430 TAN 225
FUS14125 087.000.062.430 GREEN 125 FUS14250 087.000.067.430 PINK 250
FUS14150 087.000.063.430 ORANGE 150 FUS14300 087.000.068.430 GREY 300
FUS14175 087.000.064.430 WHITE 175 FUS14400 087.000.069.430 VIOLET 400
FUS14200 087.000.065.430 BLUE 200 FUS14500 087.000.070.430 BROWN 500

PAL Female (PAL-AS)

Pack Quantity: 1

FUS1820 FUS1830 FUS1840 FUS1850

20A 30A 40A 50A

FUS1860 FUS1880 FUS18100 FUS18120

60A 80A 100A 120A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS1820 087.000.094.430 LIGHT BLUE 20 FUS1860 087.000.098.430 YELLOW 60
FUS1830 087.000.095.430 PINK 30 FUS1880 087.000.099.430 BLACK 80
FUS1840 087.000.096.430 GREEN 40 FUS18100 087.000.092.430 BLUE 100
FUS1850 087.000.097.430 RED 50 FUS18120 087.000.093.430 WHITE 120

144
 Fuses
PAL Male (PAL-B)
Pack Quantity: 1

FUS1730 FUS1740 FUS1750 FUS1760

30A 40A 50A 60A

FUS1780 FUS17100 FUS17120

80A 100A 120A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS1730 087.000.087.430 PINK 30 FUS1780 087.000.091.430 BLACK 80
FUS1740 087.000.088.430 GREEN 40 FUS17100 087.000.084.430 BLUE 100
FUS1750 087.000.089.430 RED 50 FUS17120 087.000.085.430 WHITE 120
FUS1760 087.000.090.430 YELLOW 60

PAL-E (Nissan ‘P’)

Pack Quantity: 1

FUS2445 FUS2465 FUS2475

45A 65A 75A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS2445 087.000.138.430 RED 45 FUS2475 087.000.140.430 BLACK 75
FUS2465 087.000.139.430 BLACK 65

145
 Fuses
PAL-F (Toyota ‘MF’)
Pack Quantity: 1

FUS2020 FUS2030 FUS2040 FUS2050

20A 30A 40A 50A

FUS2060 FUS2070 FUS2080 FUS20100

60A 70A 80A 100A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS2020 087.000.107.430 LIGHT BLUE 20 FUS2060 087.000.111.430 YELLOW 60
FUS2030 087.000.108.430 PINK 30 FUS2070 087.000.112.430 BROWN 70
FUS2040 087.000.109.430 GREEN 40 FUS2080 087.000.113.430 BLACK 80
FUS2050 087.000.110.430 RED 50 FUS20100 087.000.106.430 BLUE 100

JCASE Type Female

Pack Quantity: 1 L: 14.1mm W: 12.0mm H: 27.0mm
32V

FUS3420 FUS3430 FUS3440

20A 30A 40A

FUS3450 FUS3460
50A 60A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS3420 087.000.182.430 BLUE 20 FUS3450 087.000.185.430 RED 50
FUS3430 087.000.183.430 PINK 30 FUS3460 087.000.186.430 YELLOW 60
FUS3440 087.000.184.430 GREEN 40

146
 Fuses
Low Profile JCASE Type Female
Pack Quantity: 1 L: 14.5mm W: 12.0mm H: 16.0mm
58V

FUS3320 FUS3325 FUS3330

20A 25A 30A

FUS3340 FUS3350 FUS3360

40A 50A 60A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS3320 087.000.176.430 BLUE 20 FUS3340 087.000.179.430 GREEN 40
FUS3325 087.000.177.430 WHITE 25 FUS3350 087.000.180.430 RED 50
FUS3330 087.000.178.430 PINK 30 FUS3360 087.000.181.430 YELLOW 60

ATS Ceramic
Pack Quantity: 10
Length: 25mm

FUS2305 FUS2308 FUS2316 FUS2325

5A 8A 16A 25A

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS2305 087.000.130.430 YELLOW 5 FUS2316 087.000.134.430 RED 16
FUS2308 087.000.132.430 WHITE 8 FUS2325 087.000.136.430 BLUE 25

147
 Fuses
Glass Cartridge (Auto)
Pack Quantity: 10
Length: 32mm x Ø6.3mm

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS2101 087.000.114.430 - 1 FUS2115 087.000.120.430 - 15
FUS2102 087.000.115.430 - 2 FUS2120 087.000.121.430 - 20
FUS2103 087.000.116.430 - 3 FUS2125 087.000.122.430 - 25
FUS2105 087.000.117.430 - 5 FUS2135 087.000.123.430 - 35
FUS2108 087.000.118.430 - 8 FUS2150 087.000.124.430 - 50
FUS2110 087.000.119.430 - 10

Glass Cartridge (Radio)

Pack Quantity: 10
Length: 20mm x Ø5.0mm

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS2201 087.000.125.430 - 1 FUS2205 087.000.128.430 - 5
FUS2202 087.000.126.430 - 2 FUS2210 087.000.129.430 - 10
FUS2203 087.000.127.430 - 3

Strip Link
Pack Quantity: 10
Length: 41mm

WA Ref PSH Colour Amperage (A) WA Ref PSH Colour Amperage (A)
FUS1530 087.000.072.430 - 30 FUS1560 087.000.075.430 - 60
FUS1540 087.000.073.430 - 40 FUS1580 087.000.076.430 - 80
FUS1550 087.000.074.430 - 50 FUS15100 087.000.071.430 - 100

148
 Fuses
Switchable Surface Mount Circuit Breaker
SAE J1171 (ignition protected) and SAE J1625 compliant. Ingress Protection: IP67
Voltage: 48Vdc Interrupt Rating: 3000A at 30Vdc
Operating Temperature: -32°C to +82°C. Storage Temperature: -34°C to 149°C.
Black UL-rated 94V0 thermoset plastic. Protective stud insulators included.

FUS2850 FUS2860 FUS2880 FUS28100

50A 60A 80A 100A

FUS28150 FUS28200
150A 200A

WA Ref PSH Stud Size Amperage (A) WA Ref PSH Stud Size Amperage (A)
FUS2850 087.000.157.430 1/4” 50 FUS28100 087.000.154.430 1/4” 100
FUS2860 087.000.158.430 1/4” 60 FUS28150 087.000.155.430 1/4” 150
FUS2880 087.000.159.430 1/4” 80 FUS28200 087.000.156.430 3/8” 200

149
 Fuses
Fuse Kits
Contains a selection of fuses packed into a plastic box.

FUSKIT01 FUSKIT02
192pcs mini, standard, and maxi blades. Includes fuse extractor. 302pcs mini, standard, and maxi blades. Includes fuse extractor.

FUSKIT04 FUSKIT05
87pcs Mega, midi, and strip fuses 270pcs Glass auto, radio, and continental fuses

WA Ref PSH Fuse Count Fuse Kit Contents

FUSKIT01 087.000.187.430 192pcs Mini blades, standard blades, and maxi blades. Includes fuse extractor.
FUSKIT02 087.000.188.430 302pcs Mini blades, standard blades, and maxi blades. Includes fuse extractor.
FUSKIT04 087.000.189.430 87pcs Mega, midi, and strip fuses.
FUSKIT05 087.000.190.430 270pcs Glass auto, radio, and continental fuses.

150
 Fuse Holders
Standard ATO Blade Fuse Holders

FUH1200 FUH1201 FUH1203 FUH1204

20A max Splash-proof Splashproof, 20A Splashproof, 30A

FUH1205 FUH1210 FUH1220 FUH1221

Splashproof, 10A Add a circuit MTA-version MTA-version

FUH1225 FUH1230 FUH1240 FUH1245

Fixing plate for FUH1220 and FUH1221 Superseal. 2.5mm2 max Superseal. 6.0mm2 max Fixing plate for FUH1230 and FUH1240

WA Ref Notes Pack Qty

FUH1200 087.100.012.430 Can be clipped together to form multiple fuse box. 2x6.3mm blade terminals. Max rating 20A. 5
FUH1201 087.100.013.430 Can be clipped together to form multiple fuse box. With splash-proof cover. 2x6.3mm blade terminals. 5
FUH1203 087.100.015.430 IP54 ingress protection. Max rating 20A. With 20A fuse. 1
FUH1204 087.100.016.430 IP54 ingress protection. Max rating 30A. 1
FUH1205 087.100.018.430 IP54 ingress protection. Max rating 10A. 1
FUH1210 087.100.019.430 Provides an additional feed in a standard blade fuse box. 2
FUH1220 087.100.020.430 MTA-brand fuse holder. Can be clipped together to form multiple fuse box. 2x6.3mm blade terminals. 10
FUH1221 087.100.021.430 MTA-brand fuse holder. Can be clipped together to form multiple fuse box. With cover. 1
FUH1225 087.100.022.430 Fixing plate and screw for FUH1220 and FUH1221. 10
FUH1230 087.100.023.430 Splashproof fuse holder. Supplied with cover, silicon gasket, terminals to fit cables 1.0-2.5mm2. Can be clipped together. 1
FUH1240 087.100.024.430 Splashproof fuse holder. Supplied with cover, silicon gasket, terminals to fit cables 2.5-6.0mm2. Can be clipped together. 1
FUH1245 087.100.025.430 Fixing plate for FUH1230 and FUH1240. 10

151
 Fuse Holders
Mini Blade Fuse Holders

FUH1300 FUH1310
Splashproof, 30A Add a circuit

WA Ref PSH Notes Pack Qty

FUH1300 087.100.026.430 IP54 ingress protection. Max rating 30A. 1
FUH1310 087.100.027.430 Provides an additional feed in a mini blade fuse box. 2

Maxi Blade Fuse Holders

FUH1330 FUH1340 FUH1350 FUH1360

In-Line, Splashproof, 8.5mm2 cables In-Line, Splashproof, 13.0mm2 cables 1.0-2.5mm2 cables 4-6mm2 cables

FUH1370 FUH1380 FUH1390 FUH1395

8-10mm2 cables Splashproof, 4-6mm2 cables Splashproof, 8-10mm2 cables Splashproof, 16mm2 cables

WA Ref PSH Notes Pack Qty

FUH1330 087.100.028.430 In-line fuseholder. Splashproof. Fits cables 8.5mm2. 60A max. 1
FUH1340 087.100.029.430 In-line fuseholder. Splashproof. Fits cables 13.0mm2. 100A max. 1
FUH1350 087.100.030.430 Can be clipped together to form multiple fuse box. Transparent cover. 2 terminals fit cables 1.0-2.5mm2. 1
FUH1360 087.100.031.430 Can be clipped together to form multiple fuse box. Transparent cover. 2 terminals fit cables 4-6mm2. 1
FUH1370 087.100.032.430 Can be clipped together to form multiple fuse box. Transparent cover. 2 terminals fit cables 8-10mm2. 1
FUH1380 087.100.033.430 Splashproof. Can be clipped together to form multiple fuse box. 2 terminals fit cables 4-6mm2. 1
FUH1390 087.100.034.430 Splashproof. Can be clipped together to form multiple fuse box. 2 terminals fit cables 8-10mm2. 1
FUH1395 087.100.035.430 Splashproof. Can be clipped together to form multiple fuse box. 2 terminals fit cables 16mm2. 1

152
 Fuse Holders
Midi Link BF1 and Strip Link Fuse Holders

FUH1400 FUH1410

WA Ref PSH Notes Pack Qty

FUH1400 087.100.036.430 Side stackable feature. 2xM5 studs for cable connections. Max rating 200A. 1
FUH1410 087.100.037.430 2xM5 studs for cable connections. Maximum cable size is 16mm2. 1

Mega Link BF2 Fuse Holders

FUH1500 FUH1510 FUH1520

10-20mm2 cables 25-35mm2 cables

WA Ref PSH Notes Pack Qty

FUH1500 087.100.038.430 Side stackable feature. 2xM8 studs for cable connections. Max rating 500A. 1
FUH1510 087.100.040.430 2 terminals for crimping onto the cables. Cable size 10-20mm2. 1
FUH1520 087.100.041.430 2 terminals for crimping onto the cables. Cable size 25-35mm2. 1

153
 Fuse Holders
Glass Cartridge Fuse Holders

FUH1120 FUH1130
20mm fuses, panel mounted, 10A max 32mm fuses, panel mounted, 50A max

WA Ref PSH Fuse Notes Pack Qty

FUH1120 087.100.010.430 20mm radio Panel mounted fuse holder. 10A max. 1
FUH1130 087.100.011.430 32mm glass Panel mounted fuse holder. 50A max. 1

154
 Fuse Boxes
Torpedo/Continental/ATS Ceramic Fuse Boxes
Continental fuse boxes with screw terminals.

FUH1600 FUH1601 FUH1602

4-way 6-way 8-way

FUH1603 FUH1604
10-way 12-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1600 087.100.042.430 4-way continental fuse box with screw terminals 26 x 58 x 44mm
FUH1601 087.100.043.430 6-way continental fuse box with screw terminals 26 x 89 x 44mm
FUH1602 087.100.044.430 8-way continental fuse box with screw terminals 26 x 118 x 44mm
FUH1603 087.100.045.430 10-way continental fuse box with screw terminals 26 x 148 x 44mm
FUH1604 087.100.046.430 12-way continental fuse box with screw terminals 26 x 178 x 44mm

Standard ATO Blade Fuse Boxes

Standard blade fuse boxes with side-entry lucar terminals.

FUH1701 FUH1702 FUH1703

4-way 6-way 8-way

FUH1704 FUH1705
10-way 12-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1701 087.100.048.430 4-way blade fuse holder with side entry lucar terminals 42 x 86/65 x 52mm
FUH1702 087.100.050.430 6-way blade fuse holder with side entry lucar terminals 42 x 116/93 x 52mm
FUH1703 087.100.052.430 8-way blade fuse holder with side entry lucar terminals 42 x 153/130 x 52mm
FUH1704 087.100.054.430 10-way blade fuse holder with side entry lucar terminals 42 x 183/158 x 52mm
FUH1705 087.100.055.430 12-way blade fuse holder with side entry lucar terminals 42 x 210/188 x 52mm

155
 Fuse Boxes
Low Profile Standard ATO Blade Fuse Boxes
Side entry lucar terminals. Low Profile.

FUH1701A FUH1702A FUH1703A

4-way 6-way 8-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1701A 087.100.049.430 4-way blade fuse holder 36 x 80 x 29mm
FUH1702A 087.100.051.430 6-way blade fuse holder 36 x 100 x 29mm
FUH1703A 087.100.053.430 8-way blade fuse holder 36 x 120 x 29mm

Underside Connector Standard ATO Blade Fuse Boxes

Standard blade fuse boxes underside connection with 6.3mm male blade terminals.

FUH1710 FUH1720
4-way 6-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1710 087.100.056.430 4-way blade fuse box with underside connection with 6.3mm blade terminals 58 x 65 x 26mm
FUH1720 087.100.057.430 6-way blade fuse box with underside connection with 6.3mm blade terminals 58 x 85 x 26mm

156
 Fuse Boxes
Mini Blade Busbar Fuse Boxes
100A total busbar load. 6.3mm blade terminal connectors.

FUH1740 FUH1741 FUH1742

4-way 6-way 10-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1740 087.100.063.430 4-way Mini Blade Fuse Box 35 x 45 x 85mm
FUH1741 087.100.065.430 6-way Mini Blade Fuse Box 35 x 65 x 85mm
FUH1742 087.100.067.430 10-way Mini Blade Fuse Box 35 x 95 x 85mm

Standard ATO Blade Busbar Fuse Boxes

100A total busbar load. 6.3mm blade terminal connectors.

FUH1730 FUH1731 FUH1732

4-way 6-way 10-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1730 087.100.058.430 4-way Standard Blade Fuse Box 35 x 45 x 85mm
FUH1731 087.100.059.430 6-way Standard Blade Fuse Box 35 x 65 x 85mm
FUH1732 087.100.061.430 10-way Standard Blade Fuse Box 35 x 95 x 85mm

157
 Fuse Boxes
LED Mini Blade Busbar Fuse Boxes
LED illuminates if the fuse has blown. 100A total busbar load.
6.3mm blade terminal connectors.

FUH1740L FUH1741L FUH1742L

4-way 6-way 10-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1740L 087.100.064.430 4-way LED Mini Blade Fuse Box 35 x 45 x 85mm
FUH1741L 087.100.066.430 6-way LED Mini Blade Fuse Box 35 x 65 x 85mm
FUH1742L 087.100.068.430 10-way LED Mini Blade Fuse Box 35 x 95 x 85mm

LED Standard ATO Busbar Blade Fuse Boxes

LED illuminates if the fuse has blown. 100A total busbar load.
6.3mm blade terminal connectors.

FUH1730L FUH1731L FUH1732L

4-way 6-way 10-way

WA Ref PSH Description Dimensions (H x W x D mm)

FUH1730L ??? 4-way LED Standard Blade Fuse Box 35 x 45 x 85mm
FUH1731L 087.100.060.430 6-way LED Standard Blade Fuse Box 35 x 65 x 85mm
FUH1732L 087.100.062.430 10-way LED Standard Blade Fuse Box 35 x 95 x 85mm

158
 Relays
12V 4-Pin Micro Relays
86 87 86 87

86 85 86 85
87 87
30 85 30 30 85 30

RLY1301 RLY1307
12V· 40A· N.O. 12V· 40A· N.O. · Waterproof Seal

86 87 86 87

86 85 86 85
87 87
30 85 30 30 85 30

RLY1303 RLY1305
12V· 40A· N.O.· Diode 12V· 40A· N.O.· Resistor

86 87
86 85

87
30 85 30

RLY1317
12V· 40A· N.O.· Resistor · Pins 87 & 30 are 6.3mm · Pins 85 & 86 are 2.8mm

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1301 086.100.135.430 12V 40A 80A 4 N.O. - -
RLY1307 086.100.141.430 12V 40A 80A 4 N.O. - - Waterproof seal around the base
RLY1303 086.100.137.430 12V 40A 80A 4 N.O. - Diode
RLY1305 086.100.139.430 12V 40A 80A 4 N.O. - Resistor
RLY1317 086.100.152.430 12V 40A 80A 4 N.O. - Resistor Pins 86/85 are 2.8mm. Pins 87/30 are 6.3mm

159
 Relays
24V 4-Pin Micro Relays
86 87 86 87

86 85 86 85
87 87
30 85 30 30 85 30

RLY1302 RLY1308
24V· 20A· N.O. 24V· 20A· N.O.· Waterproof Seal

86 87

86 85
87
30 85 30

RLY1304
24V· 20A· N.O.· Diode

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1302 086.100.136.430 24V 20A 40A 4 N.O. - -
RLY1308 086.100.142.430 24V 20A 40A 4 N.O. - - Waterproof seal around the base
RLY1304 086.100.138.430 24V 20A 40A 4 N.O. - Diode

160
 Relays
12V 5-Pin Micro Relays
86 87a 87 86 87a 87

86 87a 85 86 87a 85
87 87
30 85 30 30 85 30

RLY1309 RLY1315
12V· 30A· Changeover 12V· 30A· Changeover· Waterproof Seal

86 87a 87 86 87a 87

86 87a 85 86 87a 85
87 87
30 85 30 30 85 30

RLY1311 RLY1313
12V· 30A· Changeover · Diode 12V· 30A· Changeover · Resistor

Closed Coil Open Coil

WA Ref PSH Voltage (V) Terminals Contact Bracket Protection Notes
Cont./Peak (A) Cont./Peak (A)
RLY1309 086.100.143.430 12V 30A / 60A 40A / 80A 5 Changeover - -
RLY1315 086.100.149.430 12V 30A / 60A 40A / 80A 5 Changeover - - Waterproof seal around the base
RLY1311 086.100.145.430 12V 30A / 60A 40A / 80A 5 Changeover - Diode
RLY1313 086.100.147.430 12V 30A / 60A 40A / 80A 5 Changeover - Resistor

161
 Relays
24V 5-Pin Micro Relays
86 87a 87 86 87a 87

86 87a 85 86 87a 85
87 87
30 85 30 30 85 30

RLY1310 RLY1316
24V· 15A· Changeover 24V· 15A· Changeover· Waterproof Seal

86 87a 87 86 87a 87

86 87a 85 86 87a 85
87 87
30 85 30 30 85 30

RLY1312 RLY1314
24V· 15A· Changeover · Diode 24V· 15A· Changeover · Resistor

Closed Coil Open Coil

WA Ref PSH Voltage (V) Terminals Contact Bracket Protection Notes
Cont./Peak (A) Cont./Peak (A)
RLY1310 086.100.144.430 24V 15A / 30A 20A / 40A 5 Changeover - -
RLY1316 086.100.150.430 24V 15A / 30A 20A / 40A 5 Changeover - - Waterproof seal around the base
RLY1312 086.100.146.430 24V 15A / 30A 20A / 40A 5 Changeover - Diode
RLY1314 086.100.148.430 24V 15A / 30A 20A / 40A 5 Changeover - Resistor

162
 Relays
12V 4-Pin Mini Relays
87 86 87 87 86 87

86 85 86 85
30 30
85 30 85 30

RLY1025 RLY1001
12V· 30A· N.O. · Integrated blade fuse 12V· 40A· N.O.

87 86 87 87 86 87

86 85 86 85

30 30
85 30 85 30

RLY1015 RLY1015B
12V· 40A· N.O. 12V· 40A· N.O. · Moulded bracket

87 86 87
87 87 86 87

86 85 86 85 30 85
30 30
85 30 86
85 30

RLY1009 RLY1011
12V· 2x40A· N.O. · Twin Relay 12V· 40A· N.O. · Non-standard pin layout (ISO7588)

87 86 87 87 86 87

86 85 86 85

30 30
85 30 85 30

RLY1020 RLY1020B
12V· 40A· N.O.· Diode 12V· 40A· N.O.· Diode · Moulded Bracket

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1025 086.100.092.430 12V 30A 60A 4 N.O. Detachable Blade Fuse
RLY1001 086.100.062.430 12V 40A 80A 4 N.O. Detachable -
RLY1015 086.100.074.430 12V 40A 80A 4 N.O. - -
RLY1015B 086.100.075.430 12V 40A - 4 N.O. Moulded -
RLY1009 086.100.069.430 12V 2x40A 2x40A 8 N.O. Fixed - Twin Relay. Can be used for trailer split charging.
RLY1011 086.100.071.430 12V 40A 80A 4 N.O. Detachable - Non-standard pin layout.
RLY1020 086.100.084.430 12V 40A 80A 4 N.O. - Diode
RLY1020B 086.100.085.430 12V 40A 80A 4 N.O. Moulded Diode

163
 Relays
12V 4-Pin Mini Relays
87 86 87 87 86 87

86 85 86 85

30 30
85 30 85 30

RLY1022 RLY1022B
12V· 40A· N.O.· Resistor 12V· 40A· N.O.· Resistor · Moulded Bracket

87 86 87 86 87
87

30 85 86 85

86 30
85 30 85 30

RLY1068 RLY1067
12V· 40A· N.O.· Resistor· Non-standard pin layout (ISO7588) 12V· 70A· N.O.· Resistor· 87 and 30 pins are 9.5mm terminals

86 87 86 87
87 87

86 85 86 85
30 30
85 30 85 30

RLY1066 RLY1037
12V· 80A· N.O.· 87 and 30 pins are 9.5mm terminals 12V· 100A· N.O.· Resistor· 87 and 30 pins are 9.5mm terminals

86 87 86 87
87

86 85 87 30

30
85 30 85 86 85 30

RLY1056 RLY1077
12V· 150A· N.O.· Resistor· 87 and 30 pins are 9.5mm terminals 12V· 200A· N.O. · 2 screws and 2 blades

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1022 086.100.088.430 12V 40A 80A 4 N.O. - Resistor
RLY1022B 086.100.089.430 12V 40A 80A 4 N.O. Moulded Resistor
RLY1068 086.100.121.430 12V 40A 80A 4 N.O. Detachable Resistor Non-standard pin layout
RLY1067 086.100.120.430 12V 70A 140A 4 N.O. - Resistor 87 and 30 pins are 9.5mm terminals
RLY1066 086.100.119.430 12V 80A 160A 4 N.O. Detachable - 87 and 30 pins are 9.5mm terminals
RLY1037 086.100.099.430 12V 100A 200A 4 N.O. - Resistor 87 and 30 pins are 9.5mm terminals
RLY1056 086.100.113.430 12V 150A 200A 4 N.O. - Resistor 87 and 30 pins are 9.5mm terminals
RLY1077 086.100.126.430 12V 200A - 4 N.O. - - 85+86: 6.3mm terminals. 87+30: M6 studs

164
 Relays
12V 5-Pin Twin/Double Mini Relays
87 86 87 87 87 86 87b 87

87 87b
86 85 30 85

30 86
85 30 85 30

RLY1003 RLY1013
12V· 2x20A· N.O.· Twin Output 12V· 2x20A· N.O.· Double Output · Non-standard pin layout (ISO7588)

87 86 87b 87 87 86 87b 87

87b 87b
86 85 86 85

30 30
85 30 85 30

RLY1017 RLY1017B
12V· 2x25A· N.O. · Double Output 12V· 2x25A· N.O. · Double Output · Moulded Bracket

87 86 87b 87
87b
86 85

30
85 30

RLY1061
12V· 2x25A· Double Output· Resistor

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1003 086.100.064.430 12V 2x20A 2x40A 5 N.O. Detachable - Twin Output
RLY1013 086.100.169.206 12V 2x20A 2x40A 5 N.O. Detachable - Twin Output Non-standard pin layout
RLY1017 086.100.078.430 12V 2x25A 2x50A 5 N.O. - - Double Output
RLY1017B 086.100.079.430 12V 2x25A 2x50A 5 N.O. Moulded - Double Output
RLY1061 086.100.116.430 12V 2x25A 2x50A 5 N.O. Moulded Resistor Double Output

165
 12V 5-Pin Changeover Mini Relays
87 86 87a 87 87 86 87a 87

86 87a 85 86 87a 85

30 30
85 30 85 30

RLY1016 RLY1016B
12V· 40/30A· Changeover 12V· 40/30A· Changeover· Moulded Bracket

87 86 87a 87 87 86 87a 87
87a
86 87a 85 30 85

30 86
85 30 85 30

RLY1007 RLY1014
12V· 40/30A· Changeover 12V· 40/30A· Changeover· Non-standard pin layout (ISO7588)

87 86 87a 87 87 86 87a 87

86 87a 85 86 87a 85

30 30
85 30 85 30

RLY1018 RLY1018B
12V· 40/30A· Changeover · Diode 12V· 40/30A· Changeover · Diode · Moulded Bracket

87 86 87a 87 87 86 87a 87

86 87a 85 86 87a 85

30 30
85 30 85 30

RLY1024 RLY1024B
12V· 40/30A· Changeover· Resistor 12V· 40/30A· Changeover· Resistor · Moulded Bracket

Closed Coil Open Coil

WA Ref PSH Voltage (V) Terminals Contact Bracket Protection Notes
Cont./Peak (A) Cont./Peak (A)
RLY1016 086.100.076.430 12V 30A / 60A 40A / 80A 5 Changeover - -
RLY1016B 086.100.077.430 12V 30A / 60A 40A / 80A 5 Changeover Moulded -
RLY1007 086.100.066.430 12V 30A / 60A 40A / 80A 5 Changeover Detachable -
RLY1014 086.100.073.430 12V 30A / 60A 40A / 80A 5 Changeover Detachable - Non-standard pin layout
RLY1018 086.100.080.430 12V 30A / 60A 40A / 80A 5 Changeover - Diode
RLY1018B 086.100.081.430 12V 30A / 60A 40A / 80A 5 Changeover Moulded Diode
RLY1024 086.100.090.430 12V 30A / 60A 40A / 80A 5 Changeover - Resistor
RLY1024B 086.100.091.430 12V 30A / 60A 40A / 80A 5 Changeover Moulded Resistor

166
 Relays
12V 5-Pin Changeover Mini Relays
87 86 87a 87 87 86 87a 87
87a
86 87a 85 86 85

30 30
85 30 85 30

RLY1070 RLY1071
12V· 40/35A· Changeover· Resistor 12V· 80/60A· Changeover· Resistor · 87, 87a, and 30 pins are 9.5mm terminals

87 86 87a 87 87 86 87a 87
87a 87a
86 85 86 85
30 30
85 30 85 30

RLY1027 RLY1054
12V· 80/60A· Changeover· Diode· 87, 87a, and 30 pins are 9.5mm terminals 12V· 150/60A· Changeover· Resistor· 87, 87a, and 30 pins are 9.5mm terminals

Closed Coil Open Coil

WA Ref PSH Voltage (V) Terminals Contact Bracket Protection Notes
Cont./Peak (A) Cont./Peak (A)
RLY1070 086.100.123.430 12V 35A / 70A 40A / 80A 5 Changeover Detachable Resistor
RLY1071 086.100.124.430 12V 60A / 120A 80A / 160A 5 Changeover - Resistor 87, 87a, and 30 pins are 9.5mm terminals
RLY1027 086.100.094.430 12V 60A / 100A 80A / 120A 5 Changeover - Diode 87, 87a, and 30 pins are 9.5mm terminals
RLY1054 086.100.111.430 12V 60A / 100A 150A / 200A 5 Changeover - Resistor 87, 87a, and 30 pins are 9.5mm terminals

167
 Relays
24V 4-Pin Mini Relays
87 86 87 87 86 87

86 85 86 85
30 30
85 30 85 30

RLY1026 RLY1002
24V· 15A· N.O.· Integrated blade fuse 24V· 20A· N.O.

87 86 87
87 87 86 87

86 85 86 85 86 85
30 30
85 30 30
85 30

RLY1010 RLY1021B
24V· 2x20A· N.O.· Twin Relay 24V· 20A· N.O.· Diode · Moulded Bracket

87 86 87 87 86 87

30 85 86 85

86 30
85 30 85 30

RLY1012 RLY1021
24V· 30A· N.O.· Non-standard pin layout (ISO7588) 24V· 40A· N.O.· Diode

87 86 87 86 87
87

30 85 86 85

86 30
85 30 85 30

RLY1069 RLY1055
24V· 40A· N.O.· Resistor· Non-standard pin layout (ISO7588) 24V· 60A· N.O.· Resistor· 87 and 30 pins are 9.5mm terminals

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1026 086.100.093.430 24V 15A 30A 4 N.O. Detachable Blade Fuse
RLY1002 086.100.063.430 24V 20A - 4 N.O. Detachable -
RLY1010 086.100.070.430 24V 2x20A 2x40A 8 N.O. Detachable - Twin Relay
RLY1021B 086.100.087.430 24V 20A 40A 4 N.O. Moulded Diode
RLY1012 086.100.072.430 24V 30A 60A 4 N.O. Detachable - Non-standard pin layout
RLY1021 086.100.086.430 24V 40A 80A 4 N.O. - Diode
RLY1069 086.100.122.430 24V 40A 80A 4 N.O. Detachable Resistor Non-standard pin layout
RLY1055 086.100.112.430 24V 60A 120A 4 N.O. - Resistor 87 and 30 pins are 9.5mm terminals

168
 Relays
24V 4-Pin Mini Relays
86 87 86 87
87

86 85 87 30

30
85 30 85 86 85 30

RLY1038 RLY1074
24V· 75A· N.O.· Resistor· 87 and 30 pins are 9.5mm terminals 24V· 100A· N.O.· 2 screws and 2 blades

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1038 086.100.100.430 24V 75A 200A 4 N.O. - Resistor 87 and 30 pins are 9.5mm terminals
RLY1074 086.100.125.430 24V 100A - 4 N.O. Moulded - 85+86: 6.3mm terminals. 87+30: M6 studs

24V 5-Pin Twin Mini Relays

87 86 87 87
87
86 85

30
85 30

RLY1004
24V· 2x10A· N.O.· Twin Output

WA Ref PSH Voltage (V) Amperage (A) Peak (A) Terminals Contact Bracket Protection Notes
RLY1004 086.100.065.430 24V 2x10A 2x20A 5 N.O. Detachable - Twin Output

169
 Relays
24V 5-Pin Changeover Mini Relays
87 86 87a 87 87 86 87a 87

87a
86 87a 85 30 85

30 86
85 30 85 30

RLY1008 RLY1031
24V· 20/15A· Changeover 24V· 20/15A· Changeover· Non-standard pin layout (ISO7588)

87 86 87a 87 87 86 87a 87

86 87a 85 86 87a 85
30 30
85 30 85 30

RLY1019 RLY1019B
24V· 20/15A· Changeover· Diode 24V· 20/15A· Changeover· Diode· Moulded bracket

87 86 87a 87 87 86 87a 87
87a
86 87a 85 86 85
30 30
85 30 85 30

RLY1060 RLY1028
24V· 20/15A· Changeover· Resistor 24V· 40/35A· Changeover · Diode· 87, 87a, and 30 pins are 9.5mm terminals

87 86 87a 87 87 86 87a 87
87a 87a
86 85 86 85
30 30
85 30 85 30

RLY1053 RLY1033
24V· 60/30A· Changeover· Resistor· 87, 87a, and 30 pins are 9.5mm terminals 24V· 70/30A· Changeover· Resistor· 87, 87a, and 30 pins are 9.5mm terminals

Closed Coil Open Coil

WA Ref PSH Voltage (V) Terminals Contact Bracket Protection Notes
Cont./Peak (A) Cont./Peak (A)
RLY1008 086.100.068.430 24V 15A / 30A 20A / 40A 5 Changeover Detachable -
RLY1031 086.100.097.430 24V 15A / 30A 20A / 40A 5 Changeover Detachable - Non-standard pin layout
RLY1019 086.100.082.430 24V 15A / 30A 20A / 40A 5 Changeover - Diode
RLY1019B 086.100.083.430 24V 15A / 30A 20A / 40A 5 Changeover Moulded Diode
RLY1060 086.100.115.430 24V 15A / 30A 20A / 40A 5 Changeover - Resistor
RLY1028 086.100.095.430 24V 30A / 100A 40A / 120A 5 Changeover - Diode 87, 87a, and 30 pins are 9.5mm terminals
RLY1053 086.100.110.430 24V 30A / 100A 60A / 120A 5 Changeover - Resistor 87, 87a, and 30 pins are 9.5mm terminals
RLY1033 086.100.098.430 24V 30A / 100A 70A / 200A 5 Changeover - Resistor 87, 87a, and 30 pins are 9.5mm terminals

170
 Relays
Relay Bases and Sockets
A range of micro and mini relay sockets.
Incorporates an interlocking facility where more relay sockets can be attached to form a relay bank.
RLY2002 incorporates the facility to click into a pre-cut circuit board aperture to provide a flush mounting.

RLY2001 RLY2002 RLY2003 RLY2004 RLY2020

Mini Mini · Flush mounting Micro Mini · High current Mini

TER6352 TER6353 TER6351 TER6354

2.8mm Female Connector 4.8mm Female Connector 6.3mm Female Connector 9.5mm Female Connector
Pack of 50 Pack of 50 Pack of 50 Pack of 50

WA Ref PSH Relay Type Pin Configuration Terminals Notes

RLY2001 086.100.158.430 Mini 4, 5, and 9 pin 5x TER6351 (6.3mm) 4x TER6352 (2.8mm)
RLY2002 086.100.159.430 Mini 4 and 5 pin 5x TER6351 (6.3mm) Flush mounting
RLY2003 086.100.160.430 Micro 4 and 5 pin 2x TER6351 (6.3mm) 3x TER6353 (4.8mm)
RLY2004 086.100.161.430 High-current Mini 4, 5, and 9 pin 2x TER6354 (9.5mm) 3x TER6351 (6.3mm) Suitable for high current relays
4x TER6352 (2.8mm)
RLY2020 086.100.164.430 Mini - - - Detachable mini-relay bracket

Relay Socket Box

RLY2010

WA Ref PSH Description

RLY2010 086.100.162.430 4-way Standard Relay Holder

171
 Relays
Voltage Sensitive Relays
Allows the charging of an auxiliary battery when vehicle voltage reaches 13.3V or 26.6V.
When vehicle voltage drops to below 12.8V or 25.6V the relay will disconnect the auxiliary battery.
For modern vehicles with smart charging systems (2012+) voltage sensitive relays may not function correctly.
Please refer to battery-to-battery chargers.

VOLTAGE SENSITIVE RELAY

+VE AUX BAT
SENSE +VE

STR +VE AUX +VE

GROUND

STARTING AUXILIARY
BATTERY BATTERY

RLY1039· 12V, 60A

RLY1040· 12V, 140A GROUND GROUND Positive feed
RLY1064· 24V, 100A to accessories

WA Ref PSH Voltage Amperage Voltage Cut-in Voltage Cut-off

RLY1039 086.100.101.430 12V 60A 13.3V 12.8V
RLY1040 086.100.102.430 12V 140A 13.3V 12.8V
RLY1064 086.100.118.430 24V 100A 26.6V 25.6V

Charge Guard Relays

1
2 MAIN AUX
3

RLY1049 RLY1050
12V· 70A· Cut In: 13.4V· Cut Out: 12.6V 12V· 200A· Cut In: 13.4V· Cut Out: 12.5V
Pin 1 : Starting Battery +ve MAIN : Starting Battery +ve · M8 Stud
Pin 2 : Auxiliary Battery +ve AUX : Auxiliary Battery +ve · M8 Stud
Pin 3 : Ground -ve Fly Lead : Ground -ve

WA Ref PSH Voltage (V) Amperage (A) Terminals Cut In (V) Cut Out (V) Dimensions Notes
RLY1049 086.100.106.430 12V 70A 3 13.4V 12.6V -
RLY1050 086.100.107.430 12V 200A 2 13.4V 12.5V 120 x 80 x 70mm Quiescent current > 1mA

172
 Solenoids
4-terminal Sputnik Solenoids

3 4

1 2

1 3 4 2

Voltage Coil Contacts Switch Contacts Continuous Surge Current

WA Ref PSH Terminals Coil Bracket
(V) (3+4) (1+2) Current (A) (A)
SND12001 054.100.069.157 12V 4 Insulated 2 x M4 2 x M8 150A 300A Flat
SND12002 054.100.068.157 24V 4 Insulated 2 x M4 2 x M8 100A 200A Flat
SND12003 054.100.069.156 12V 4 Insulated 2 x M4 2 x M8 80A 200A Flat
SND12004 054.100.068.156 24V 4 Insulated 2 x M4 2 x M8 60A 100A Flat

6-terminal Sputnik Solenoids

3 4 5 6

1 2
5 6

1 3 4 2

3 4 5 6

1 2
5 6

1 3 4 2

Voltage Coil Contacts Switch Contacts NO Contacts (1+2) NC Contacts (5+6)

WA Ref PSH Terminals Coil Bracket
(V) (3+4) (1, 2, 5, 6) Current (A) Current (A)
Cont. Surge Cont. Surge
SND12005 054.000.076.206 12V 6 Insulated 2 x M4 4 x M8 80A 150A 60A 60A Flat
SND12006 054.000.514.206 12V 6 Insulated 2 x M4 4 x M8 80A 150A 60A 60A Curved
SND12007 054.000.344.156 24V 6 Insulated 2 x M4 4 x M8 50A 100A 30A 30A Flat
SND12008 054.000.552.156 24V 6 Insulated 2 x M4 4 x M8 50A 100A 30A 30A Curved
SND12123 054.100.069.157 12V 6 Insulated 2 x10-32UNF 4 x 5/16-24UNF 200A 900A 200A 900A Flat

173
 Solenoids
Lucas Bulkhead Mount Solenoids
M8+9.5mm+6.3mm lucars M8+9.5mm+6.3mm lucars
1 1

3 3 4
6.3mm 6.3mm 6.3mm
lucar lucar lucar

2 1 3 2 2 1 3 4 2
M8 M8

SND157 SND161
Lucas SRB325 Lucas SRB338

M8 M8+2x9.5mm lucars
1 1

3 4 3 4
6.3mm 6.3mm 6.3mm 6.3mm
lucar lucar lucar lucar

2 1 3 4 2 2 1 3 4 2
M8 M8

SND162 SND1501
Lucas SRB335 Lucas SRB319

M8+2x9.5mm lucars M8+9.5mm+6.3mm lucars

1 1

3 4 3 4
6.3mm 6.3mm M4+ M4+
lucar lucar 6.3mm 6.3mm
lucar lucar
2 1 3 4 2 2 1 3 4 2
M8 M8

SND1502 SND1503
Lucas SRB321 Lucas SRB351

Voltage Coil Contacts Switch Contact Switch Contact Cont. Surge

WA Ref PSH Terminals Coil
(V) (3+4) (1) (2) Current (A) Current (A)
SND157 054.000.057.206 12V 3 Earthed 1 x 6.3mm lucar M8 + 9.5+6.3mm lucars M8 100A 400A
SND161 054.001.612.106 12V 4 Earthed 2 x 6.3mm lucar M8 + 9.5+6.3mm lucars M8 100A 400A
SND162 054.001.613.106 12V 4 Insulated 2 x 6.3mm lucar M8 M8 100A 400A
SND1501 054.001.610.106 12V 4 Insulated 2 x 6.3mm lucar M8 + 2x9.5mm lucars M8 100A 400A
SND1502 054.100.050.106 24V 4 Insulated 2 x 6.3mm lucar M8 + 2x9.5mm lucars M8 100A 400A
SND1503 054.001.552.106 24V 4 Insulated 2 x M4 posts with M8 + 9.5+6.3mm lucars M8 100A 400A
6.3mm lucars

174
 Solenoids
Lucas Push-button Starter Solenoids
M8+9.5mm+6.3mm lucars
1

3
M4

2 1 3 2
M8
SND152

M8
1

3 4
M4 M4

2 1 3 4 2
M8
SND12518
Lucas SRB319

Voltage Coil Contact Switch Contacts

WA Ref PSH Terminals Coil Notes
(V) (3+4) (1+2)
SND152 054.000.057.206 12V 3 Earthed 1 x M4 2 x M8 With rubber boot over switch
SND12518 054.001.612.106 12V 4 Insulated 2 x M4 2 x M8 With rubber boot over switch. Lucas SRB319

175
 Battery Isolator Switches
Key/Handle Battery Isolator Switches

BIS1001 BIS1002
BIS1000 100A. Removable key.
100A. Removable key. 250A with chain.
Additional supplementary contacts

BIS1004 BIS1010 BIS1022

250A. Fixed handle. 100A. Fixed handle. 200A. Fixed key.

BIS1025 BIS1000K BIS1002K

250A. With chain. Replacement key for BIS1000 Replacement key for BIS1002

Nominal Cont. Surge IP Operating Terminal

WA Ref PSH Contacts Notes
Tension (V) Current (A) Current (A) Rating Temp (°C) Contacts
BIS1000 082.100.006.430 24V 100A 500A x 5s IP43 –40/+50°C Copper Steel/Zinc M10
BIS1001 082.100.009.430 24V 150A 1200A x 5s IP65 –30/+60°C Silver-plated Cu M10 5A supplementary contacts
BIS1002 082.100.010.430 24V 250A 2500A x 5s IP65 –40/+80°C Silver-plated Cu Steel/Zinc M10
BIS1004 082.100.012.430 24V 250A 2500A x 5s IP65 –40/+80°C Silver-plated Brass M10
BIS1010 082.100.016.430 24V 100A 500A x 5s - - - M10 Fits 19.5mm hole.
BIS1022 082.100.026.430 24V 200A 1500A x 5s IP65 –30/+60°C M10 Fixed key.
BIS1025 082.100.027.430 24V 250A 2500A x 5s - - 4 x M10 - Double pole / 4 terminals

WA Ref PSH Description

BIS1000K 082.100.008.430 Replacement key for BIS1000
BIS1002K 082.100.011.430 Replacement key for BIS1002

176
 Battery Isolator Switches
Button Battery Isolator Switch

BIS1018
130A. Emergency push button.
Push to disconnect. Twist to reset/connect.

Nominal Cont. Surge IP Operating Terminal

WA Ref PSH Contacts Notes
Tension (V) Current (A) Current (A) Rating Temp (°C) Contacts
BIS1018 082.100.023.430 48V 130A 500A x 10s - - M8 Fits Ø37mm panel cut out

Remote Battery Isolator Switch

BIS1020
300A. U-type fixing bracket.

Nominal Cont. Surge Terminal

WA Ref PSH Contacts Notes
Tension (V) Current (A) Current (A) Contacts
BIS1020 082.100.024.430 24V 300A 2400A x 1s M5 M10 Single pole. Bosch U-type fixing bracket.

177
 Battery Isolator Switches
Marine Battery Isolator Switches

BIS1014 BIS1015 BIS1016

300A. On - Off 300A. On 1 - On 2 - On 1+2 - Off 310A. On 1 - On 2 - On 1+2 - Off
Single battery switch Twin battery switch Twin battery switch

BIS1017 BIS1021 BIS1026

250A. On - Off 550A. On - Off 200A. On 1 - On 1+2 - On 2 - Off
Single battery switch Single battery switch Twin battery switch with field isolator

BIS1027 BIS1028
100A. On 1 - On 1+2 - On 2 - Off 200A. On - Off - Actuator Removal
Twin battery switch Single battery switch

No of Nominal Cont. Surge Dimensions

WA Ref PSH Pole Contacts Switch Positions
Batteries Tension (V) Current (A) Current (A) (L x W x H mm)
BIS1014 082.100.019.430 1 48V 300A 1000A x 5s Single 69 x 69 x 77mm M10 On - Off
BIS1015 082.100.020.430 2 48V 300A 1000A x 5s Single 69 x 69 x 77mm M10 On 1-On 2-On 1+2-Off
BIS1016 082.100.021.430 2 12V 310A 500A x 5min Single Ø136 x 77mm M10 On 1-On 1+2-On 2-Off
BIS1017 082.100.022.430 1 24V 250A 2500A x 5s Double - M10 On - Off
BIS1021 082.100.025.430 1 48V 550A 2500A x 5s Single 102 x 102 x 90mm M12 On - Off (with padlock lockout)
BIS1026 082.100.028.430 2 48V 200A 1000A x 5s Single+Field Sw Ø140mm M10+M4 On 1-On 2-On 1+2-Off
BIS1027 082.100.029.430 2 48V 100A 1000A x 5s Single 69 x 69 x 74mm M8 On 1-On 1+2-On 2-Off
BIS1028 082.100.030.430 1 48V 200A 1000A x 5s Single 69 x 69 x 74mm M10 On - Off - Actuator Removal

178
 Battery Isolator Switches
Marine Battery Isolator Switches

BIS1031 BIS1032
50A. On - Off 50A. On - Off - Out M4 Contacts
Single pole battery switch · Fixed actuator Single pole battery switch · Removable actuator Ø45 x 50 x Ø24mm

BIS1033 BIS1034
100A. On - Off 100A. On - Off - Out M6 Contacts
Single pole battery switch · Fixed actuator Single pole battery switch · Removable actuator Ø45 x 55 x Ø30mm

BIS1035 BIS1036
200A. On - Off 200A. On - Off - Out M8 Contacts
Single pole battery switch · Fixed actuator Single pole battery switch · Removable actuator Ø45 x 60 x Ø40mm

BIS1037 BIS1038
300A. On - Off 300A. On - Off - Out M10 Contacts
Single pole battery switch · Fixed actuator Single pole battery switch · Removable actuator Ø55 x 74 x Ø53mm

No of Nominal Cont. Surge Dimensions Switch

WA Ref PSH Pole Contacts Actuator
Batteries Tension (V) Current (A) Current (A) Ø x H x Cutout mm Positions
BIS1031 082.100.033.430 1 50V 50A 300A Single Ø45 x 50 x Ø24mm M4 On - Off Fixed
BIS1032 082.100.034.430 1 50V 50A 300A Single Ø45 x 50 x Ø24mm M4 On - Off - Out Removable
BIS1033 082.100.035.430 1 32V 100A 500A Single Ø45 x 55 x Ø30mm M6 On - Off Fixed
BIS1034 082.100.036.430 1 32V 100A 500A Single Ø45 x 55 x Ø30mm M6 On - Off - Out Removable
BIS1035 082.100.037.430 1 32V 200A 1000A Single Ø45 x 60 x Ø40mm M8 On - Off Fixed
BIS1036 082.100.038.430 1 32V 200A 1000A Single Ø45 x 60 x Ø40mm M8 On - Off - Out Removable
BIS1037 082.100.039.430 1 32V 300A 1000A Single Ø55 x 74 x Ø53mm M10 On - Off Fixed
BIS1038 082.100.040.430 1 32V 300A 1000A Single Ø55 x 74 x Ø53mm M10 On - Off - Out Removable

179
 Battery Isolator Switches
Remote Control Isolator Switch
Dual pole battery isolators. Positive or negative disconnection with separate coil feed.
IP Protection: IP65/IPX7 Operating Temperature: –40°C to +85°C
Terminal Contacts: Silver-plated Copper Nuts: M10 tin-plated brass
Max Continual Operating Current: 250A Highest Load: 2500A x 3s
Dimensions (L x W x H mm): 144 x 110 x 121mm Replacement rubber boots: EC47818 (sold in pairs)

30A 30
31A 31

86 85
EC47818

BIS1008
24V, 250A

Nominal Cont. Surge Peak Current Holding Coil

WA Ref PSH
Tension (V) Current (A) Current (A) Coil Rated Output (A) Input Rated (A)
BIS1008 082.100.014.430 24V 250A 2500A x 3s 3.4A 0.3A

Current Isolator Switches with ADR approval

ADR1999 approval. Dual pole battery isolators with mechanical On-Off switch
3 second emergency cut-off delay. Positive or negative disconnection.
IP Protection: IP65/IPX7 Operating Temperature: –40°C to +70°C
Terminal Contacts: Silver-plated Copper Nuts: M10 tin-plated brass
Max Continual Operating Current: 250A Highest Load: 2500A x 5s
Dimensions (L x W x H mm): 144 x 110 x 121mm

BIS1011 BIS1012
24V, 250A 12V, 250A
Replacement for Lucas SSB100, SSB101 Replacement for Lucas SSB102

WA Ref PSH Nominal Tension (V) Cont. Current (A) Surge Current (A) Lucas Ref Notes
BIS1011 082.100.017.430 24V 250A 2500A x 5s SSB100, SSB101 ADR1999 approval
BIS1012 082.100.018.430 12V 250A 2500A x 5s SSB102 ADR1999 approval

180
 Ignition Switches
Ignition Switches

KEY POSITION S TERMINAL KEY POSITION S TERMINAL KEY POSITION S TERMINAL

0 0 0
A 1 0 Off (K ey Removable) Bat Acc Ign S t A 1 0 Off Bat Acc Ign Htr St S t A 1 0 Off (K ey Removable) Bat Acc Ign S t
A Accessories 30 75 15 5 0 A Auxillary 30 58 15/54 19 17 50a A Accessories

KEY POSITION
KEY POSITION

1 Ignition 2
1 Ignition 2 3 2 1 Ignition
2 2 2 Heater 1

KEY POSITION
2 Start + Ignition 2 2 Start + Ignition
1 3 Start + Ignition A
3
Key removable at 0 andA. 1
A 0
A
0 0

IGS1004 IGS1005 IGS1190

KEY POSITION S TERMINAL KEY POSITION S TERMINAL KEY POSITION S TERMINAL

0 0 0
1 0 Off (K ey Removable) Bat Ign Htr S t 1 0 Off (K ey Removable) Bat Aux Ign Htr S t
1 Ignition +Aux 1 4 2 5 3
1 0 Off (K ey Removable) Bat Ign S t
1 Ignition 1 2 3 4
KEY POSITION

1 Ignition 2 3 1
KEY POSITION

KEY POSITION
2 Heater 2 2 Heater 3
2 2 3 Start + Heate r 2 Start + Ign
3 Start + Heate r 2 2
1 2
3
3
1 1
A
0 0 0

IGS1901 IGS1906 IGS1914

KEY POSITION S TERMINAL KEY POSITION S

0 0 TERMINAL
A 1 0 Off (K ey Removable) Bat Ign Acc S t A 1 0 Off Bat Ign St Aux Htr
A Accessories 1 2 3 4
KEY POSITION

A Auxillary 1 2 3 4 5
2 1 Ignition 2 2 1 Ignition 3
2 Start + Ignition 2 Preheat
KEY POSITION

1 2
3 Heat + Start
A 3
Key removable at 0 andA. 1
0 A
0

IGS1916 IGS1917 IGS1922

WA Ref PSH Notes Spare Key Terminals

IGS1004 082.200.001.210 Bosch-style. Supplied with two keys. - 4
IGS1005 082.200.015.430 12V ignition switch. Supplied with two universal keys. IGS1924 5
IGS1190 082.200.016.430 Supplied with two keys. - 4
IGS1901 082.200.017.430 Supplied with two keys. Lucas 34228, 35670. EC47080 4
IGS1906 082.200.019.430 Supplied with two keys. Lucas 35327, 2846130. EC47080 5
IGS1914 082.200.020.430 12V ignition switch. Supplied with two keys. - 3
IGS1916 082.200.021.430 12V universal ignition switch. Supplied with two keys. Lucas 34680. - 4
IGS1917 082.200.022.430 Lucas barrel and two keys. Lucas 54316731, 54335169. Fits IGS1914, IGS1916. - -
IGS1922 082.200.023.430 Supplied with two keys. Lucas 36614. EC47080 5

181
 Ignition Switches
Ignition Switches

0
KEY POSITION S TERMINAL IGS1924 EC47080
A 1 P Park Bat Acc Ign S t
0 Off ( Key Removable) 30 58 15/54 5 0a
KEY POSITION

2 1 Ignition 2
2 Ignition + Start
1
0
P

IGS1923

WA Ref PSH Notes Spare Key Terminals

IGS1923 082.200.024.430 Supplied with two keys. 26mm panel hole. IGS1924 4
IGS1924 082.200.025.430 Spare ignition switch key for IGS1005 and IGS1923. - -
EC47080 082.200.014.430 Spare key. Sold in packs of 5 pairs (10 keys in total). Lucas 54324157. - -

182
 Switches
Rocker Switches

SW1006 SW1006A SW1006G SW1006R

SW1007A SW1007G SW1007R

SW1008 SW1008A SW1008G SW1008R SW1008B

SW10081

WA Ref PSH Switch Type V / A Pole/Way Terminals Aperture Notes

SW1006 082.000.173.430 On/Off 20A@12V 2 Pole/1 Way 6.3mm Blade 20 x 34.5mm
SW1006A 082.000.174.430 On/Off 20A@12V 2 Pole/1 Way 6.3mm Blade 20 x 34.5mm 12V Amber LED
SW1006G 082.000.175.430 On/Off 20A@12V 2 Pole/1 Way 6.3mm Blade 20 x 34.5mm 12V Green LED
SW1006R 082.000.176.430 On/Off 20A@12V 2 Pole/1 Way 6.3mm Blade 20 x 34.5mm 12V Red LED
SW1007A 082.000.178.430 On/Off 16A@12V 1 Pole/1 Way 6.3mm Blade Ø 12.5mm 12V Amber LED
SW1007G 082.000.179.430 On/Off 16A@12V 1 Pole/1 Way 6.3mm Blade Ø 12.5mm 12V Green LED
SW1007R 082.000.180.430 On/Off 16A@12V 1 Pole/1 Way 6.3mm Blade Ø 12.5mm 12V Red LED
SW1008 082.000.181.430 On/Off 10A@12V 1 Pole/1 Way 4.8mm Blade Ø 20mm
SW1008A 082.000.183.430 On/Off 10A@12V 1 Pole/1 Way 4.8mm Blade Ø 20mm 12V Amber LED
SW1008G 082.000.185.430 On/Off 10A@12V 1 Pole/1 Way 4.8mm Blade Ø 20mm 12V Green LED
SW1008R 082.000.186.430 On/Off 10A@12V 1 Pole/1 Way 4.8mm Blade Ø 20mm 12V Red LED
SW1008B 082.000.184.430 On/Off 10A@12V 1 Pole/1 Way 4.8mm Blade Ø 20mm 12V Blue LED
SW10081 082.000.182.430 On/On 10A@12V 1 Pole/2 Way 4.8mm Blade Ø 20mm

183
 Switches
Toggle Switches

SW1003 SW1004 SW1005 SW1009 SW1010

Flash· Off On· Off On· Off· On On· Off· On On· Off

SW1011 SW1012 SW1013 SW1014 SW1016

Flash· Off On· Off On· On On· Off · On On· Off

SW1017 SW1019 SW1020R

On· On Waterproof Cover Red Switch Cover

WA Ref PSH Switch Type V / A Pole/Way Terminals Aperture Notes

SW1003 082.000.170.430 Flash/Off 10A@12V 1 Pole/1 Way 6.3mm Blade Ø 12.5mm
SW1004 082.000.171.430 On/Off 10A@12V 1 Pole/2 Way 6.3mm Blade Ø 12.5mm
SW1005 082.000.172.430 On/Off/On 10A@12V 1 Pole/2 Way 6.3mm Blade Ø 12.5mm
SW1009 082.000.187.430 On/Off/On 20A@12V 1 Pole/2 Way Screw Ø 12.5mm
SW1010 082.000.188.430 On/Off 20A@12V 1 Pole/1 Way 6.3mm Blade Ø 12.5mm
SW1011 082.000.189.430 Flash/Off 25A@12V 1 Pole/1 Way Screw Ø 12.5mm Silver contacts
SW1012 082.000.190.430 On/Off 25A@12V 1 Pole/1 Way Screw Ø 12.5mm Silver contacts
SW1013 082.000.191.430 On/On 25A@12V 1 Pole/2 Way Screw Ø 12.5mm Silver contacts
SW1014 082.000.192.430 On/Off/On 25A@12V 1 Pole/2 Way Screw Ø 12.5mm Silver contacts
SW1016 082.000.194.430 On/Off 25A@12V 1 Pole/1 Way 6.3mm Blade Ø 12.5mm Silver contacts
SW1017 082.000.195.430 On/On 25A@12V 1 Pole/2 Way 6.3mm Blade Ø 12.5mm Silver contacts

SW1019 082.000.197.430 Waterproof cover for SW1011, SW1012, SW1013, SW1014, SW1016, SW1017, and SW1018
SW1020R 082.000.198.430 Red Switch cover for SW1011, SW1012, SW1013, SW1014, SW1015R, SW1016, SW1017, and SW1018

184
 Switches
Toggle Switches

SW1021 SW1022 SW1023 SW1024 SW1025

On· Off · On On· Off On· Off · On On· On On· Off

SW1026 SW1066 SW1059 SW1062 SW1065

On· Off Three Position Flash· Off · Flash On· On On· Off · On

SW1066 SW1067
Off· On · On Off· On · On

WA Ref PSH Switch Type V /A Pole/Way Terminals Aperture Notes

SW1021 082.000.199.430 On/Off/On 20A@12V 2 Pole/2 Way Screw Ø 12.5mm 3 position switch
SW1022 082.000.200.430 On/Off 20A@12V 2 Pole/1 Way Screw Ø 12.5mm
SW1023 082.000.201.430 On/Off/On 6A@12V 1 Pole/2 Way Solder Ø 6mm
SW1024 082.000.202.430 On/On 6A@12V 1 Pole/2 Way Solder Ø 6mm
SW1025 082.000.203.430 On/Off 6A@12V 1 Pole/1 Way Solder Ø 6mm
SW1026 082.000.204.430 On/Off 20A@12V 2 Pole/1 Way Ø 12.5mm
SW1066 082.000.228.430 Three position 10A@12V First: 1,6,7 Second: 1,4,6,7 Third: 1,4,7,8 Ø 14.5mm Lucas, 57SA
SW1059 082.000.222.430 Flash/Off/Flash 10A@28V 1 Pole/2 Way 6.3mm Blade Ø 12.5mm
SW1062 082.000.224.430 On/On 20A@12V 2 Pole/2 Way Screw Ø 12.5mm 2 position version of SW1021
SW1065 082.000.227.430 On/Off/On 12/24V 1 Pole/2 Way 3 x Lucar Ø 14.5mm Lucas 57SA (flashing indicator)
SW1066 082.000.228.430 Off/On/On 12/24V 1 Pole/2 Way x 2 5 x Lucar Ø 14.5mm Lucas 57SA (lighting or heater fan)
SW1067 082.000.229.430 Off/On/On 12/24V 1 Pole/2 Way 6 x Lucar Ø 14.5mm Lucas 57SA (2 speed wipers)

185
 Switches
Push/Pull Switches

SW1031 SW1032 SW1039

Long On/Off Short On/Off On/Off

WA Ref PSH Switch Type V /A Pole/Way Terminals Aperture Notes

SW1031 082.000.205.430 Long On/Off 16A@12V, 8A@24V 1 Pole/1 Way Screw Ø 8mm 16mm long thread
SW1032 082.000.206.430 Short On/Off 16A@12V, 8A@24V 1 Pole/1 Way Screw Ø 8mm 6.5mm long thread
SW1039 082.000.208.430 On/Off 10A@12V, 3A@24V 1 Pole/1 Way Screw Ø 9.5mm Lucas SPB104

Push Switches

SW1002 SW1040 SW1043 SW1060 BRI13340100

Push Momentary Push Horn Momentary Push Momentary Push

WA Ref PSH Switch Type V /A Pole/Way Terminals Aperture Notes

SW1002 082.000.169.430 Push 1 Pole/1 Way Screw Ø 16mm
SW1040 082.000.209.430 Momentary Push 20A@12V 1 Pole/1 Way Screw Ø 19mm Vandal Resistant
SW1043 082.000.211.430 Horn 6A@12V, 3A@24V 1 Pole/1 Way Screw Button Ø35mm Lucas SPB160
SW1060 082.000.223.430 Momentary Push 1 Pole/1 Way 6.3mm Blade Lucas SPB106
BRI13340100 082.000.022.600 Momentary Push 1 Pole/1 Way Screw HxLxD: 29x31x41mm. Brass.

186
 Telemecanique Switches
Telemecanique Switches
For DIN rail mounting 0.4A max

TELZEN-L1111 TELZEN-L1121
Normally Open Switch Normally Closed Switch
Green Plunger Red Plunger

WA Ref PSH Plunger Colour Max Amperage (A) Description

TELZEN-L1111 082.000.152.600 Green 0.4A Normally Open Switch
TELZEN-L1121 082.000.153.600 Red 0.4A Normally Closed Switch

Telemecanique Buttons

TELZB5-AA334 TELZB5-AA335 TELZB5-AA432 TELZB5-AD2 TELZB5-AS844

Black arrow on white background White arrow on black White circle on red background Black Turn Dial Emergency Stop Button
Spring return background Spring return On-Off settings Red latch assembly
Spring return

WA Ref PSH Description

TELZB5-AA334 082.000.145.600 Black arrow on white background push button
TELZB5-AA335 082.000.146.600 White arrow on black background push button
TELZB5-AA432 082.000.147.600 White circle on red background push button
TELZB5-AD2 ??? Two position rotary switch. On-Off Settings
TELZB5-AS844 ??? Emergency stop button

187
 Telemecanique Switches
Telemecanique Enclosures
Includes DIN rail for mounting ZEN-L1111 and ZEN-L1121 switches.

TELXAL-D01 TELXAL-D02 TELXAL-D03 TELXAL-D04

One Module Enclosure Two Module Enclosure Three Module Enclosure Four Module Enclosure
W: 68mm H: 68mm D: 53mm W: 68mm H: 104mm D: 53mm W: 68mm H: 134mm D: 53mm W: 68mm H: 166mm D: 53mm

WA Ref PSH Modules Dimensions (W x H x D mm) Description

TELXAL-D01 082.000.133.600 1 68 x 68 x 53 One module enclosure
TELXAL-D02 082.000.134.600 2 68 x 104 x 53 Two module enclosure
TELXAL-D03 082.000.135.600 3 68 x 134 x 53 Three module enclosure
TELXAL-D04 082.000.136.600 4 68 x 166 x 53 Four module enclosure

Telemecanique Control Stations

Fixed position control boxes.

TELXAL-D222 TELXAL-DAD2
2 x Push Buttons 2 x Push Buttons and 1 x Selector
2 x NO contacts 2 x NO and 1 x NC contacts

WA Ref PSH Pole Buttons Contacts Dimensions (W x H x D mm)

TELXAL-D222 082.000.137.600 Single 2 x push buttons 2 x NO 68 x 104 x 53
TELXAL-DAD2 082.000.140.600 Single 2 x push buttons and 1 x selector switch 2 x NO and 1 x NC 68 x 134 x 53

188
 Telemecanique Switches
Telemecanique Control Stations
Pendant-style control boxes

TELXAC-A201 TELXAC-A2153
2 x push buttons 2 x push buttons and 1 x emergency stop
2 x NO contacts 2 x NO contacts and 1 x NC contact

WA Ref PSH Pole Buttons Contacts Dimensions (W x H mm)

TELXAC-A201 082.000.131.600 Single 2 x push buttons 2 x NO 50 x 276
TELXAC-A2153 082.000.132.600 Single 2 x push buttons and 1 x emergency stop 2 x NO and 1 x NC 50 x 276

Telemecanique Emergency Stop

TELXAL-K178E TELXAL-K178F
1 x Emergency Stop Button 1 x Emergency Stop Button
1 x NO and 1 x NC contacts 2 x NC contacts

WA Ref PSH Pole Buttons Contacts Dimensions (W x H x D mm)

TELXAL-K178E 082.000.141.600 Single 1 x emergency stop button 1 x NO and 1 x NC 68 x 68 x 53
TELXAL-K178F 082.000.142.600 Single 1 x emergency stop button 2 x NC 68 x 68 x 53

189
 Trailer Connectors and Coils
12V 7-Pin Plugs and Sockets

PLG1201 PLG1202 PLG1203 PLG1204

N Plug N Plug S Plug S Plug

SCT1201 SCT1201F SCT1202 SCT1202F SCT1203

N Socket N Socket with fog cut-off switch N Socket N Socket with fog cut-off switch S Socket

SCT1204 SCT1206 SCT1200

S Socket N Trailing Socket

WA Ref PSH Voltage Type Material Standard Notes

PLG1201 084.200.011.430 12V N-plug Aluminium ISO1724 Screw terminals
PLG1202 084.200.012.430 12V N-plug Plastic ISO1724 Screw terminals
PLG1203 084.200.013.430 12V S-plug Aluminium ISO3732 Screw terminals
PLG1204 084.200.014.430 12V S-plug Plastic ISO3732 Screw terminals
SCT1201 084.300.012.430 12V N-socket Aluminium ISO1724 Screw terminals
SCT1201F 084.300.012.430 12V N-socket Aluminium ISO1724 Screw terminals and with fog cut-off switch
SCT1202 084.300.013.430 12V N-socket Plastic ISO1724 Screw terminals
SCT1202F 084.300.012.430 12V N-socket Plastic ISO1724 Screw terminals and with fog cut-off switch
SCT1203 084.300.014.430 12V S-socket Aluminium ISO3732 Screw terminals
SCT1204 084.300.014.430 12V S-socket Plastic ISO3732 Screw terminals
SCT1206 084.300.016.430 12V N-trailing socket Plastic ISO1724 Screw terminals

SCT1200 084.300.011.430 12V Rear rubber gasket for 12V 7-pin sockets

190
 Trailer Connectors and Coils
24V 7-Pin Plugs and Sockets

PLG2401 PLG2402 PLG2403 PLG2404

N Plug N Plug S Plug S Plug

SCT2401 SCT2402 SCT2403 SCT2404

N Socket N Socket S Socket S Socket

WA Ref PSH Voltage Type Material Standard Notes

PLG2401 084.200.016.430 24V N-plug Aluminium ISO1185 / DIN72579 Screw terminals
PLG2402 084.200.017.430 24V N-plug Plastic ISO1185 / DIN72579 Screw terminals
PLG2403 084.200.018.430 24V S-plug Aluminium ISO3731 Screw terminals
PLG2404 084.200.019.430 24V S-plug Plastic ISO3731 Screw terminals
SCT2401 084.300.019.430 24V N-socket Aluminium ISO1185 / DIN72579 Screw terminals
SCT2402 084.300.020.430 24V N-socket Plastic ISO1185 / DIN72579 Screw terminals
SCT2403 084.300.021.430 24V S-socket Aluminium ISO3731 Screw terminals
SCT2404 084.300.022.430 24V S-socket Plastic ISO3731 Screw terminals

24V EBS Plug and Socket

PLG2406 SCT2406
EBS Plug EBS Socket

WA Ref PSH Voltage Type Material Standard Notes

PLG2406 084.200.021.430 24V EBS plug Plastic ISO7638-1 7-pin Screw terminals
SCT2406 084.300.024.430 24V EBS socket Plastic ISO7638-1 7-pin Screw terminals

191
 Trailer Connectors and Coils
12V Continental (13-pin) Plug and Socket

PLG1205 SCT1205
13-pin Plug 13-pin Socket

WA Ref PSH Voltage Type Material Standard Notes

PLG1205 084.200.015.430 12V Plug Plastic ISO11446 / DIN72570 13-pin Screw terminals
SCT1205 084.300.015.430 12V Socket Plastic ISO11446 / DIN72570 13-pin Screw terminals

24V 15-pin Plug and Socket

PLG1012 SCT2408
15-pin Plug 15-pin Socket

WA Ref PSH Voltage Type Material Standard Notes

PLG1012 084.200.010.430 24V Plug Plastic ISO12098 Screw terminals
SCT2408 084.300.026.430 24V Socket Plastic ISO12098 Screw terminals

192
 Trailer Connectors and Coils
Plug and Socket Adapters

CL1610 CL1613 CL1614

13-pin plug to 13-pin socket to 13-pin plug to
7-pin N and S sockets 7-pin N plug 7-pin N socket

WA Ref PSH Voltage Description

CL1610 084.100.010.430 12V 13-pin plug to 7-pin N and S sockets flylead
CL1613 084.100.012.430 12V 13-pin socket to 7-pin N plug one-piece adapter
CL1614 084.100.013.430 12V 13-pin plug to 7-pin N socket one-piece adapter

Trailer Socket Brackets

TSB1000 TSB1010 TSB1020

Single trailer socket Double trailer socket Pre-wired single trailer socket

TSB1030 TSB1100
Pre-wired double trailer socket Nut and bolt

WA Ref PSH Description Pack Quantity

TSB1000 084.300.042.430 Single trailer socket bracket, Steel. 1
TSB1010 084.300.043.430 Double trailer socket bracket, Steel. 1
TSB1020 084.300.044.430 Pre-wired single trailer socket bracket. 1.5m cable. 1
TSB1030 084.300.045.430 Pre-wired double trailer socket bracket. (With fog cut-out). 2.0m cable. 1
TSB1100 084.300.046.430 2BA x 1.25” nut and bolt for trailer socket. 50

193
 Trailer Connectors and Coils
24V Clang Plugs and Sockets

PLG2420 PLG2421 PLG2422 PLG2423

7-pin N Plug 7-pin S Plug 10-pin Plug 3-pin Plug

SCT2420 SCT2421 SCT2422 SCT2423

7-pin N Socket 7-pin S Socket 10-pin Socket 3-pin Socket

PLG2427 SCT2427
Plug Parking Bracket Dust Boot

WA Ref PSH Voltage Type Pins Legrand Ref Notes

PLG2420 084.200.022.430 24V N-Plug 7-pin Female CT6896H Hook type
PLG2421 084.200.023.430 24V S-Plug 7-pin Female CT6937H Hook type
PLG2422 084.200.024.430 24V Plug 10-pin Female CT6860H Hook type
PLG2423 084.200.025.430 24V Plug 3-pin Female CT6871 25A
SCT2420 084.300.029.430 24V N-Socket 7-pin Male CT6895
SCT2421 084.300.030.430 24V S-Socket 7-pin Male CT6936
SCT2422 084.300.031.430 24V Socket 10-pin Male CT6859
SCT2423 084.300.032.430 24V Socket 3-pin Male CT6870 25A

PLG2427 084.200.029.430 24V Plug Parking Bracket CT6881

SCT2427 084.300.036.430 24V Dust boot to fit 3, 7, and 10-pin sockets

194
 Trailer Connectors and Coils
3-pin Auxiliary Plug and Socket
Rated at 2x25A and 1x5A continuous.
6.3mm and 4.8mm blade terminals.
Thermoplastic

PLG2428 SCT2428
3-pin Auxiliary Plug 3-pin Auxiliary Socket

WA Ref PSH Voltage Type Pins Notes

PLG2428 084.200.030.430 12/24V Aux Plug 3-pin Male Thermoplastic
SCT2428 084.300.037.430 12/24V Aux Socket 3-pin Female Thermoplastic

Black Rubber Coils

Thin wall elastomeric rubber cores.
Black polyurethane sheath.

CL1700 CL1701 CL1702

3-core coil 5-core coil 7-core coil

WA Ref PSH Max Coil Extension (m) Cores Wires

CL1700 084.100.015.430 3.0m 3-core coil 3x0.75mm2
CL1701 084.100.016.430 3.0m 5-core coil 5x0.75mm2
CL1702 084.100.017.430 3.0m 7-core coil 6x1.00mm2 + 1x2.00mm2

195
 Trailer Connectors and Coils
Battery Charging Coils
TPF insulation on core and sheath
Coil Diameter: 68mm
Cable Diameter: 17.5mm

CL1800 CL1900 CL1950

4-core coil 3-core coil with Clang plugs 4-core coil with Anderson plugs

WA Ref PSH Max Coil Extension (m) Cores Wires Connectors

CL1800 084.100.018.430 3.0m 4-core coil 4x6mm2 (Red-Red / Black-Black) -
CL1900 084.100.019.430 3.0m 3-core coil 3x6mm2 3-pin Clang plug (PLG2423). Use with SCT2423.
CL1950 084.100.020.430 3.0m 4-core coil 2+2x6mm2 2-pin Anderson plugs (TER3120/TER3125).

196
 Intelligent Towing Controllers
Smart Caravan Relays
For controlling the power to the caravan fridge and battery-charging circuits.
These smart relays have been comprehensively upgraded in the last two years to provide a near-perfect interface between a caravan’s
demanding auxiliary circuits and the car. Professionally fitted, with the right gauge of cable, they deliver high currents to the caravan
with the lowest voltage drop. This ensures that the caravan battery will be kept charged up during the towing and the caravan fridge
will stay cold. (Assuming that the car itself can offer the voltage and the alternator is not otherwise overloaded).

Single Fuse
30A

Use CAB2250 (single) or

Vehicle Battery

CAB2450 (twin)

2 x 3mm2
12V, 30A
Smart Combination Relay

0v +12v +12v
Pin 2 = Switched Output A

4 6 2
Pin 6 = Switched Output B
Pin 4 = Unswitched Output

ITC1030
0v Earth to Chassis

WA Ref PSH Description

ITC1030 086.100.055.430 12V, 30A, Twin Relay, Self Switching
Note the fuse and cable ratings indicated.
For caravans with 30A fridges, link pins 2 and 6 in the caravan plug so that both relays and both switched
terminals share the load of the fridge.

Simple Bypass Relays

What do bypass relays do?
They allow trouble-free fitting on vehicles with complex electrics and electronics. They are designed to operate trailer road lamps in
unison with the towing vehicle’s road lamps without drawing any significant current from the vehicle’s road lamp circuits.
Are bypass relays required by law?
They are not specifically required by law, but it is often essential to fit them to make sure that the tow bar electrical installation is fit
for purpose.

Red to vehicle brake circuit

Vehicle Fog When the vehicle fog
= Connect light is switched on, line
(B) becomes an earth and
+12V Wire from +12v terminal
switches the trailer fog-lamp
6 Brake
NC Red on. Both the +12V terminal
+12V
6 Brake
and the red wire are
White

White to Chassis Earth

The “NC” function allows this NC connected to the constant
relay to be used as a
“normally closed” B) Switched earth To trailer fog (Pin 2) live wire.
(seems live but becomes earth when fog is on)
(switch off) relay.
A) Constant Live

ITC1400 Standard fitting Fitting to neg-switched (fog) lamp

Brown to vehicle RH tail circuit

+12v Power from battery
Red to vehicle brake circuit

Black to vehicle LH tail circuit 5/7 7-Core Brown/Black (both)

6 7-Core Red (Brake Lights)

White to Chassis Earth

ITC1420
WA Ref ITC1420PSH Description
ITC1400 086.100.058.430 Bulb failure bypass relay, single (with “switch-off” option)
ITC1420 086.100.059.430 Bulb failure bypass relay - two relay, three lamp

197
 Intelligent Towing Controllers
Smart Bypass Relays
What do smart bypass relays do?
A smart bypass relay allows trouble-free fitting on most vehicles whose rear light circuits will not tolerate additional loads.
When vehicles with more complex electrics send test pulses, etc. through their rear light circuits, conventional bypass relays may
malfunction. Smart bypass relays smooth out these pulses on vehicles, including the latest and most complex systems.

White to Chassis

A Yellow Connect thin

B Blue signal wires to
7-core Built-in Buzzer
C Green car loom
output to
trailer D Brown
Neg TT
socket E Red
+12v
Black
F UltraSmart7 +12v
Twin grey wires from coil
of reverse relay. Either
ITC1210 polarity okay.

ITC1200

WA Ref PSH Description

ITC1210 086.100.057.430 Ultrasmart Bypass: 7-lamp bypass with programmed microchip controller.
Intelligent switch on all circuits makes the trailer lights work correctly at all times, however complex
the car’s lighting control system.
This advanced relay array uses logic to control the switching of the trailer lighting circuits. The
Ultrasmart7 bypass with its enhanced logic, will work, without adjustment, on virtually all 12V cars.
It is quick and easy to fit, and very cost-effective. It bypasses all the vehicle’s bulb-failure warning systems.
• Comfortably handles the most complex signals and pulses in advanced cars.
• Maintains the correct trailer lights even when car “swaps” functions if bulb fails.
• Monitors the trailers flashers with both audible and terminal outputs.
• Self-tests on fitting.
• Totally transparent – the car does not detect the unit.
• Quiescent* current less than one milliamp.
• Fully snubbed against spikes, etc. Type-approved for EMC compliance.
• Protected – stands rough treatment, accidental current reversal, etc.
• Future-proof – new in-vehicle scenarios will continue to be accommodated.
• Offers fog control and trailer lamp auto-check as free options.
* Quiescent current: current used when idle. Modern cars have a very low QC tolerance – even tiny extra loads can cause power shut down.

ITC1210 can also be used from a 24V lighting circuit to a 12V trailer lighting circuit. A 10A voltage
dropper is required (e.g.VRD1106 or VRD1111).
ITC1200 086.100.056.430 24V Advanced-7 Bypass Relay
This 24V relay is designed to support 24V to trailer lights from a 24V vehicle.
With plain signal wires.

198
 Horns
Disc Horns

HRN1000 HRN1001 HRN1002 HRN1003

12V, Single, Low 12V, Single, High 12V, Twin, Low 24V, Twin, Low

HRN1004 HRN1005 HRN1006 HRN1007

12V, Twin, High 24V, Twin, High 24V, Single, Low 24V, Single, High

HRN1300
36-48V, Twin, High

WA Ref PSH Voltage (V) Decibels (dB) Terminals Tone Hz

HRN1000 085.100.018.430 12V 105 Single Low 360
HRN1001 085.100.019.430 12V 105 Single High 420
HRN1002 085.100.020.430 12V 105 Twin Low 360
HRN1003 085.100.021.430 24V 105 Twin Low 360
HRN1004 085.100.022.430 12V 105 Twin High 420
HRN1005 085.100.023.430 24V 105 Twin High 420
HRN1006 085.100.024.430 24V 105 Single Low 360
HRN1007 085.100.025.430 24V 105 Single High 420
HRN1300 085.100.032.430 36-48V 105 Twin High 420

199
 Horns
Shell Horns

HRN1200 HRN1201 HRN1202

12V, Single, Low 12V, Single, High 12V, Twin, Low

HRN1203 HRN1204 HRN1205

24V, Twin, Low 12V, Twin, High 24V, Twin, High

WA Ref PSH Voltage (V) Decibels (dB) Terminals Tone Note

HRN1200 085.100.026.430 12V 105 Single Low
HRN1201 085.100.027.430 12V 105 Single High
HRN1202 085.100.028.430 12V 105 Twin Low
HRN1203 085.100.029.430 24V 105 Twin Low
HRN1204 085.100.030.430 12V 105 Twin High
HRN1205 085.100.031.430 24V 105 Twin High

200
 Fiamm Horns
Fiamm Shell Horns
Accreditations: CEE 70/388, R.28ECE/ONU, CEE95/54

FIM924156 FIM924157 FIM932306Z

WA Ref PSH Voltage (V) Amperage (A) Decibels (dB) Frequency (Hz) Family
FIM924156 085.100.016.600 12V 4.5A 107 High: 500 AM80SH
FIM924157 085.100.014.600 12V 4.5A 107 Low: 405 AM80SL
FIM932306Z 085.100.017.600 12V 9.0A 113 Low: 405, High: 495 AM80SX

Fiamm Jericho Electro-Pneumatic Air Horn

Accreditations: CEE 70/388, R.28ECE/ONU, CEE95/54

FIM928047

WA Ref PSH Voltage (V) Amperage (A) Decibels (dB) Frequency (Hz) Connector
FIM928047 085.100.015.600 24V 0.9A 118 380 DIN

201
 Fiamm Horns
Fiamm Air Compressors (Single Output)
Accreditations: CEE 70/388, R.28ECE/ONU, CEE2004/104. 12V relay use RLY1001.
Supplied with mounting bolt and relay. 24V relay use RLY1002.

FIM921988 FIM921989
12V 24V

WA Ref PSH Voltage (V) Amperage (A) Dimensions (Top Ø x H x Base Ø mm) Notes Family
FIM921988 085.100.012.600 12V 17A 77 x 104 x 69mm M4
FIM921989 085.100.013.600 24V 8A 77 x 104 x 69mm M4

Fiamm Air Compressors (Twin Output)

Accreditations: CEE 70/388, R.28ECE/ONU, CEE2009/19.
Reg 10 ECE. Supplied with Ω-bracket, bolts, and lubrificator

FIM921123 FIM921124
12V 24V

WA Ref PSH Voltage (V) Amperage (A) Dimensions Notes Family

FIM921123 085.100.010.600 12V 17A MC4 FI
FIM921124 085.100.011.600 24V 8A MC4 FI

202
 Fiamm Horns
Fiamm Single Air Trumpets
Accreditations: CEE 70/388, R.28ECE/ONU

FIM920613 FIM920614
150Hz · 623mm length 180Hz · 528mm length

WA Ref PSH Air Operating Decibels Frequency Length Family

Consumption (l/sec) Pressure (KPa) (dB) (Hz) (mm)
FIM920613 085.100.006.600 5.5 600/1200 118 150 623 TA150
FIM920614 085.100.007.600 5.5 600/1200 118 180 528 TA180

Fiamm Twin Air Trumpets

Accreditations: E310R027012, e3 027012, CEE 95/54, E310R027013, e3 027013
FIM920157 Accreditation: R.28 ECE/ONU

FIM920392 FIM920396
284/215mm length 299/278mm length

WA Ref PSH Decibels Low High Length Notes Family

(dB) (Hz) (Hz) (mm)
FIM920392 085.100.004.600 117 466 622 284/215 TA2
FIM920396 085.100.005.600 117 440 494 299/278 Red UK Emergency Vehicles TA2 BLV

203
 Fiamm Horns
Fiamm Electromagnetic Air Valves

FIM920950 FIM920975
12V 24V

WA Ref PSH Voltage (V) Amperage (A) Description

FIM920950 085.100.006.600 12V 1.5A Electromagnetic Air Valves
FIM920975 085.100.007.600 24V 0.7A Electromagnetic Air Valves

204
 Reverse Alarms
Splashproof Reverse Alarms
12 and 24V versions Tonal alarm with night silent facility.
Splashproof 85dB at 1m
Red wire (reverse lights), Black wire (ground),Yellow wire (sidelamps and to trigger night silent mode).

REH1001 REH1002
12V with night silent 24V with night silent

WA Ref PSH Voltage (V) Decibels (dB) Connection Silent Night

REH1001 085.400.029.430 12V 85dB Wired connection Yes
REH1002 085.400.029.430 24V 85dB Wired connection Yes

Heavy Duty Reverse Alarm

Dual 12V-24V voltage 2,500Hz tonal alarm with night silent facility.
Fully waterproof and can be steam-cleaned. 102dB
Dimensions (Ø x L mm): Ø70 x 73.5mm 0.25A
Single-bolt fitting.
Red wire (reverse lights), Black wire (ground),Yellow wire (sidelamps and to trigger night silent mode).

REH1100
12/24V with night silent

WA Ref PSH Voltage (V) Decibels (dB) Description

REH1100 085.400.030.430 12-24V 102dB Heavy Duty Reverse Alarm

205
 Reverse Alarms
Mini Interior Low Air Warning Buzzers
12 and 24V versions

REH1400 REH1401
12V · Black 24V · Red

WA Ref PSH Voltage (V) Colour Description

REH1400 085.400.040.430 12V Black 12V Mini Interior Buzzer
REH1401 085.400.041.430 24V Red 24V Mini Interior Buzzer

Universal Mounting Reverse Alarms

Multivoltage (12-80V) Universal mounting.
Fully weatherproof and pressure washable. Available with night silent facility.
Dimensions (W x H x D mm): 101 x 67 x 45mm CE and EMC marked.
900Hz tonal alarm.

REH1300 (90dB) · REH1301 (102dB) REH1300N (90dB) · REH1301N (102dB REH1302 (97dB) · REH1304 (102dB)
Wired Connection Wired Connection with Night Silent Stud terminals

WA Ref PSH Voltage (V) Decibels (dB) Connection Night Silent

REH1300 085.400.033.430 12-80V 90dB Wired connection No
REH1300N 085.400.034.430 12-80V 90dB Wired connection Yes
REH1301 085.400.035.430 12-80V 102dB Wired connection No
REH1301N 085.400.036.430 12-80V 102dB Wired connection Yes
REH1302 085.400.037.430 12-80V 97dB Stud terminals No
REH1304 085.400.038.430 12-80V 102dB Stud terminals No

206
 Reverse Alarms
Broadband Sound Reverse Alarm
Dual voltage (12/24V). Multi-frequency broadband sound.
Night silent facility. IP67 water resistant.
Compatible with late model Volkswagen and Peugeot applications.

REH1324
Wired Connection with Night Silent

WA Ref PSH Voltage (V) Decibels (dB) Connection Night Silent

REH1324 085.400.039.430 12/24V 83dB (Night) / 88dB (Day) Wired connection Yes

Broadband Sound Reverse Alarm

N

Multivoltage (12-80V). White noise and tonal sounds

Night silent facility. IP67 water resistant.
Dimensions: 102 x 36 x 67mm ABS housing material.
ECE R10 rating.

REH1325
White Noise and Tonal Sound
with Night Silent

WA Ref PSH Voltage (V) Decibels (dB) Connection Night Silent

REH1325 085.400.039.430 12-80V 82dB (Night) / 107dB (Day) 4 wires Yes

207
 Reverse Alarms
Talking Alarm 
N

Multivoltage (10-30V). Talking alarm with "Left Turn", "Right Turn", and "Reversing".
97dB rating Other voice messages are also available.
Dimensions: 84 x 68 x 45mm IP68 rating.
ECE R10 rating. Glass filled nylon housing material.

REH1326
Talking Alarm
Left Turn, Right Turn, Reversing

WA Ref PSH Voltage (V) Decibels (dB) Connection Voice Messages

REH1326 085.400.039.430 10-30V 97dB 4 wires Left Turn, Right Turn, Reversing

Double-Engage Reverse Alarm

N

Dual voltage (12/24V). Select reverse twice mute facility.

Not suitable for automatic transmissions or EVs. IP67 water resistant.
CE and emc marked. Epoxy-sealed for greater durability.

AVR70R2
Double-Engage Reverse Alarm

WA Ref PSH Voltage (V) Amperage (A) Decibels (dB) Dimensions Connection
AVR70R2 085.400.042.430 12/24V 0.4A 92dB (900Hz) 67 x 101 x 45mm Wired connection

208
 Seat Belt Safety Kits
High Visibility Wired Seatbelts
A range of high-visibility seatbelts with wired receptacles. All the receptacles use an internal micro switch capable of 2A at 12V and
1A at 24V. The switches use three wires: a common white, a N.O. black (circuit is closed when the belt is fastened) and a N.C. red
(circuit is opened when the belt is fastened).

Most LED and xenon beacons can simply be wired in using a 5A fused ignition positive supply and earth switched through the seat
belt receptacle wiring. A standard 12V halogen rotating beacon draws 4.6A at 12V or 3.0A at 24V, and so it is recommended to
“switch negative” from the seat belt switch and to always install the correct cable sizes, relay, and fuses to accommodate the type of
beacon used. It is possible to “switch positive” from the seat belt switch but it is strongly recommended that a relay is installed within
the circuit.

All belts conform to ECE Regulation 16.

SBK1000 SBK1010 SBK1020 SBK1030

Wired receptacle and Wired receptacle Wired receptacle and Wired receptacle and
20cm orange strap Without strap retractable orange safety belt orange lap belt

WA Ref PSH Description

SBK1000 085.500.006.430 Wired receptacle and 20cm orange strap
SBK1010 085.500.007.430 Wired receptacle without strap
SBK1020 085.500.008.430 Wired receptacle and retractable orange safety belt
SBK1030 085.500.009.430 Wired receptacle and orange lap belt

209
 CCTV Kits
7" Colour Camera System
N

The 7.0” LCD high-resolution colour monitor included with this system provides the optimal viewing area for mobile CCTV
applications. Excellent picture quality is assured even in low-light conditions using a CMOS colour infrared camera. The flat,
widescreen monitor allows unobtrusive mounting with a large, easily viewable screen area.

CMOS 18 LED infrared camera Includes monitor sunshade (non-removeable).

12/24V dual voltage Includes 20m 4-pin lead.
Monitor dimensions: 178 x 116 x 24mm 800 x 480 resolution with 16:9 aspect ratio.
Camera dimensions: 74 x 76 x 66.5mm No audio.

EC7010-K
7.0" LCD Colour System

WA Ref PSH Voltage (V) Description Notes

EC7010-K ??? 12-24V 7" Colour Camera System Includes 20m cable

210
 Voltage Droppers
Non-Isolated Voltage Droppers
Transient voltage: Level 3 @ ± 2kV Connection: 4 x 6.3mm spade
Quiescent current: <15mA Oscillator frequency: 60kHz
Protection: Overload, reverse polarity, short circuit, soft shutdown

VRD1100 VRD1103 VRD1105 VRD1106

24V to 13.2V (7A max, 3.8A cont) 24V to 13.2V (11A max, 6.8A cont) 48V to 13.2V (7A max, 4A cont) 24V to 13.2V (14A max, 10A cont)

WA Ref PSH Voltage Input Output Constant current Intermittent current Efficiency Dimensions Weight
Conversion VDC VDC 100% duty cycle 30% duty cycle (approx) (mm)
VRD1100 088.300.004.430 24V to 13.2V 15-38 13.2 3.8A 7A 91% 69 x 74 x 31 138g + fittings
VRD1103 088.300.005.430 24V to 13.2V 15-38 13.2 6.8A 11A 90% 79 x 74 x 31 186g + fittings
VRD1105 088.300.006.430 48V to 13.2V 18-55* 13.2 8.0A 11A 89% 89 x 74 x 31 209g + fittings
VRD1106 088.300.007.430 24V to 13.2V 15-38 13.2 10.0A 14A 89% 89 x 74 x 31 207g + fittings

* Broadband

Switch Mode Voltage Droppers

Connection: 6 x 6.3mm spade Quiescent current: <18mA
Protection: Over-current, over-heat, over-voltage, transient and reverse polarity

VRD1110 VRD1112
24V to 12V (10A max, 5A cont) 24V to 12V (30A max, 15A cont)

WA Ref PSH Input Output Constant current Intermittent current Suitable Applications
VDC VDC 100% duty cycle 30% duty cycle
VRD1110 088.300.004.430 20-32 12 5A 10A Radio cassette and CD players, mobile phones
VRD1112 088.300.005.430 20-32 12 10A 30A Multiple applications

211
 Battery to Battery Chargers
Sterling Power BB Ultra Series
Versatile Battery-to-Battery Chargers
The BB Ultra series is a well-established range of Battery-to-Battery (B2B) chargers from Sterling Power. B2Bs have become
very popular as they fast charge batteries without the need for complex wiring, touching the alternator, or tampering with ECUs.
Compatible with Euro 6 engines and regenerative braking systems, the B2Bs provide fast 4-stage charging with simple and quick
installation. Simply connect the B2B between the battery being charged and the battery you need to charge.

Two Activation Modes Simple Installation

Both automatic and ignition feed activation. Default is automatic No ECU issues. No complex wiring. Fully prepared for smart
which works on input voltage and timing algorithms. alternators and regenerative braking systems.
9 Preset Battery Chemistry Options Various Output Voltages
Including AGM, lithium-ion (LiFePO4), gel, flooded, and sealed Output charging at 12V, 24V, 36V, and 48V. Input voltages at 12V
lead-acid. and 24V. Up to 800W rating.
4 Stage Battery Charging Dynamic Thermal Charging
The B2B charges batteries from 5 to 20 times faster than a Temperature sensor included with all models.
standalone alternator. Night Time Setting
Safety Features Allows the unit to run at half power to reduce fan noise.
100% non-flammable housing, no screws to corrode, multi-stage Optional Remote Control
fan cooling, battery management system. Displays voltage, warnings, temperatures. Set B2B modes (force
float, half current, standby, off, night mode, reset).

STEBB1230· 12V In, 12V Out, 30A STEBB1260· 12V In, 12V Out, 60A
STEBB122430· 12V In, 24V Out, 30A STEBB241235· 24V In, 12V Out, 35A

WA Ref PSH Voltage In Voltage Out Amps In Dimensions IP Rating Weight Notes
(VDC) (VDC) (A) (L x W x D mm) (kg)
STEBB1230 088.000.014.434 12 12 30 190 x 160 x 50mm IP21 1.2
STEBB122430 088.000.013.434 12 24 30 190 x 160 x 50mm IP21 1.2
STEBB1260 088.000.015.434 12 12 60 190 x 160 x 70mm IP21 1.4
STEBB241235 088.000.016.434 24 12 35 190 x 160 x 70mm IP21 1.4

WA Ref PSH Description Dimensions

STEBBURC 088.000.019.434 Remote control with 10m cable Cutout Ø54mm

212
 Battery to Battery Chargers
Sterling Power Saturn Series
N

Bidirectional Battery to Battery Chargers

Sterling continues to innovate with DC/DC chargers. The Saturn series now features bi-directional charging. When there is excess
charge available on the leisure battery the Saturn charger will automatically engage its reverse charge feature. The reverse charge
13.4V voltage is ideal to maintain the starter battery.

Buck/Boost Technology Charging Presets and Lithium Battery Support

96-98% efficiency offers the best harvest from point A to point Saturn chargers feature 6 integrated charging presets for a broad
B with cool running. Fan cooling (on units 40A or above) and a range of battery technologies. Two lithium-suitable charging
metal chassis means running at full-power all day long. presets are also available.
Euro-6, Euro-7, and Electric Vehicles Self-Recovery
Saturn chargers are suitable for Euro-6, Euro-7, and electric If the starter battery is drained, the Saturn chargers can be a
vehicles in various configurations. lifeline. The reverse charge feed can be engaged manually to
Smart Alternator Compatible charge the starter battery from the leisure batteries.
Smart alternators pose a challenge to many DC/DC chargers. Remote Control Available
Saturn chargers can be ignition controlled or even vibration The Saturn remote (STEBBR) provides access to more advanced
controlled to ensure the Saturn runs whenever the key is turned. customisation features and full live information on the current
Simple Install operations.
Positive input from the starter battery, positive output to
the leisure batteries and a common negative throughout. An
additional cable will be required if using an ignition feed.

STEBB1225 STEBB1240 STEBB1270 STEBB12120 STEBB12200

12V · 26A 12V · 40A 12V · 70A 12V · 120A 12V · 200A
120 x 130 x 56mm 165 x 130 x 56mm 200 x 130 x 56mm 270 x 130 x 73mm 309 x 130 x 96mm

WA Ref PSH Voltage In Voltage Out Input Current Weight Dimensions Bidirectional Reverse
(VDC) (VDC) (A) (kg) (L x W x D mm) Charge
STEBB1225 ??? 12 12 26A 0.6 125 x 130 x 56 Yes 13.3V at 13A
STEBB1240 ??? 12 12 40A 0.8 160 x 130 x 56 Yes 13.3V at 20A
STEBB1270 ??? 12 12 70A 1.0 230 x 130 x 56 Yes 13.3V at 20A
STEBB12120 ??? 12 12 120A 1.8 270 x 130 x 73 Yes 13.3V at 40A
STEBB12200 ??? 12 12 200A 2.2 309 x 130 x 96 Yes 13.3V at 60A
STEBB1224120 ??? 12 24 120A 1.8 270 x 130 x 73 Yes 13.3V at 50A
STEBB1248120 ??? 12 48 120A 1.8 270 x 130 x 73 Yes 13.3V at 40A

213
 Battery to Battery Chargers
Sterling Power Pro Charge B
Waterproof Battery-to-Battery Charger (built to IP68)
The Pro Charge B is a fully epoxy encapsulated, plug and play, battery-to-battery charger. It is primarily designed to be put between
the starter battery and a leisure battery. The charger puts a load on the alternator and converts that load
into a 4-stage charging profile to provide fast and effective charging to the appliance batteries. The charger is perfectly suited for
outdoor and marine use with its IP68 rating.

Fully Waterproof Various Activation Modes

Fully encapsulated and built to IP68. Automatic mode works by sensing voltage
Up to 400W rating Manual mode works from switch override
Input voltages at 12V and 24V. Regenerative braking mode the charger stays on down to 12.2V.
Output voltages at 12V, 24V, 36V, and 48V. Regenerative braking friendly
Battery chemistry type selection Suitable for battery banks up to 300Ah at 12V
6 battery chemistry types including Gel, AGM, Lead Acid (sealed Pre-wired and pre-fused 1.5m cables
and open), and Calcium.
Multiple units can be used on the same installation
Thermal power reduction
Allows for short high power runs to maximise power transfer. Charger Weight and Size:
L: 230mm W: 135mm H: 65mm
Boost / Reduce Charging 3.0kg
Ensures the batteries get the correct charging profile regardless
of high or low input voltage.

Example Usages
Charging in a Commercial Vehicle
A very common commercial vehicle setup would include having
an appliance battery in the rear and a starter battery in the
engine bay and connecting them with a Pro Charge B. This can
then be used for output charging at 12V, 24V, 36V, or 48V. Suitable
for battery banks up to 300Ah from a 12V vehicle.

With the advent of smart alternators and regenerative braking

systems to improve vehicle fuel efficiency, the Pro Charge B is
able to operate at low input voltages of 12.2V. This makes the Pro
Charge B a regenerative braking friendly system.

For 24V commercial vehicles there are Pro Charge B models that
can also charge a 24V or 12V appliance battery and also act as a
modern version evencharger.

STEBBW1224
The STEBBW1224 can be used to maintain the charge of a 24V
(2x12V) “jump start” battery kit in a service or breakdown
vehicle.

STEBBW1224

WA Ref PSH Voltage In Voltage Out Input Current Notes

(VDC) (VDC) (A)
STEBBW1212 088.000.022.434 12 12 25 *
STEBBW1224 088.000.021.434 12 24 25 * Can be used to maintain the charge of a 24V jump start battery kit
STEBBW2412 088.000.016.434 24 12 13 Can be used as a modern version of the EC4770 evencharger

* 25A for about 30 minutes then drops to about 18A on thermal restriction

214
 Battery to Battery Chargers
Sterling Power Waterproof BBW Series 
N

IP68 Waterproof Battery to Battery Chargers

Aluminium housing, a water resistant fan and a highly efficient waterproof DC/DC board are found in the latest waterproof Sterling
Power DC/DC chargers. Chargers come sealed with pre-wired 1.5m long cables, and pre-installed fuses and fuse holders on the
cables. The waterproof chargers share all of the features present in the non-waterproof ranges.

Cable and Fusing Included 12V to 48V Models

These sealed devices come with pre-wired cables (1.5m long), A full range of 12V to 48V models are available.
pre-fused, with 8mm ring terminals. 7 Preset Battery types
Simple Setup 7 preset battery types plus a customisable charge profile if the
Simple installation and setup. Simple to use buttons for existing presets are insufficient.
configuration. No more magnets needed. Custom Settings
BB Software Customer voltage engagement settings and an option ignition
The BBW range uses the same interface and software as the feed.
existing BB range. IP68 Rating
Lithium Compatibility Please note the unit itself is rated at IP68 but the fan unit is rated
Complete lithium compatibility including current limiting and low at IP55.
temperature trip.

Sterling Power BBW Series

128 x 238 x 94mm

WA Ref PSH Voltage In Voltage Out Input Current Weight Dimensions Notes
(VDC) (VDC) (A) (kg) (L x W x D mm)
STEBBW1230 ??? 12 12 30A 3.5 128 x 238 x 94
STEBBW122430 ??? 12 24 30A 3.5 128 x 238 x 94
STEBBW241215 ??? 24 12 15A 3.5 128 x 238 x 94
STEBBW242415 ??? 24 24 15A 3.5 128 x 238 x 94
STEBBW123630 ??? 12 36 30A 3.5 128 x 238 x 94
STEBBW124830 ??? 12 48 30A 3.5 128 x 238 x 94
STEBBW244815 ??? 24 48 15A 3.5 128 x 238 x 94

215
 Selecting a Power Inverter
Vehicle-Based AC Mains Power
An inverter provides a 230V AC mains power source from your 12V or 24V DC vehicle battery. There are many different inverters
available that can support a wide range of applications. The correct specification and choice of inverter is critical for both trouble-
free vehicle and appliance operation as well as avoiding damaging to both your inverter and your attached appliances.

Quasi (Modified) Sine Wave

Quasi or modified sine wave inverters are generally more competitively priced than pure sine inverters and can be used in simple
systems that don’t have delicate electronics or require a pure sine input. For example, older CRT TVs or monitors and electric
motors with brushes are usually okay with quasi-sine wave inputs. Some appliances may appear to work fine with a quasi-sine wave
but may run hotter than normal and reduce the life of the appliance.
150W to 500W Quasi Sine Wave Inverters
These inverters are suited to leisure and occasional use applications such as charging mobile phones, laptops, etc for upto 4 hours of
continuous usage. These inverters are normally connected directly to your vehicle battery or by plugging into the vehicles’ 12V DC
socket.

1000W to 4000W Quasi Sine Wave Inverters

These inverters are well suited to more demanding applications providing upto 12 hours of continuous usage. These inverters are
connected with heavy-duty input cables for direct connection to your vehicle battery.

Pure Sine Wave

A pure sine wave inverter replicates a normal domestic mains supply and are normally required for powering more sensitive
electronic equipment. A pure wave inverter is generally needed for newer LED TVs or monitors, audio equipment, fluorescent lamps,
and inductive loads like brushless electric motors.

Surge/Peak Ratings
When selecting either a quasi or pure sine inverter you must determine what the maximum wattage draw is if all your attached
appliances are turned on at the same time. For example, if you have a 800W pump, a 100W fridge, five 10W lamps, and a 50W laptop
you would have the requirement for a 1,000W inverter. If your pump and fridge are both turned on together then the surge could be
x3 to x4 times the rated wattage. Therefore, the maximum surge power rating could be 4,500W.

You must ensure that the inverter can handle the possible surge.
Inverters are rated with both a continuous wattage and a surge (peak) wattage.

216
 Selecting a Power Inverter
Choosing the Correct Type of Inverter
NO
Do you know what appliances will be connected?

YES
A C
Are the appliances to be used mostly from
section A, B, or C?

B
YES
Are appliances used regularly for long periods?

NO
NO YES
Do any appliances have variable power control?

Quasi Sine Inverter Pure Sine Inverter

Recommended Recommended

A Products which are generally compatible with all inverter types

Digital TV Hair Electric Angle Fridge Kettle Electric Heat Gun Electric Toaster Electric Circular Electric
Dryer Jigsaw Grinder Strimmer Fan Drill Saw Heater

B Products which may be incompatible with quasi sine

Contact the manufacturer to confirm compatibility before use. C Products which are known to be incompatible and may
cause damage to the appliance and quasi sine inverter

Digital Variable Fluorescent Microwave Games Desktop Laptop Powertool Photographic Rechargeable Fluorescent Laser
Clock Speed Lighting Oven Console PC PC Rechargers Lighting Shaver Lamps Printers
Tools

217
 Quasi Sine Inverters
Sterling Power I Series Quasi Sine Inverters
Quasi sine wave inverters work with most electrical appliances, including hair-dryers, phones, computer chargers,
microwaves, kettles, etc. Exceptions to this are any appliances which are thyristor-controlled for example washing
machines or bread makers.

Cost Effective Quiet Operation

Quasi/modified sine wave inverters are significantly cheaper New larger fan to reduce operating noise.
than pure sine inverters but work with around 95% of electrical High Power to Size Ratio
products. A small footprint for the power size across a range from 100W
12V and 24V Models to 5000W.
A range of both 12VDC and 24VDC inputs.
Pre-wired
230VAC 50Hz Models All inverters come pre-wired and come with 24Kt gold-plated
For use with UK and European domestic appliances. connectors.
110VAC / 50Hz Models 1000kW+ Models
For UK building site applications. Come with yellow 16A sockets, Includes the STESWR remote control panel with 5m of cable.
remote control, and engine interlock.
British and Euro Sockets
Most models are fitted with both British and Euro sockets.

STESWR
Remote Control with 5m lead

350W to 800W Quasi Sine Inverters

STEI12350· 12V, 350W STEI12600· 12V, 600W STEI12800· 12V, 800W

STEI24350· 24V, 350W STEI24600· 24V, 600W STEI24800· 24V, 800W

Voltage In Power Voltage Out Dimensions Weight

WA Ref PSH Socket Type Notes
(VDC) (W) (VAC) (LxWxD mm) (kg)
STEI12350 088.200.010.434 12V 350W 230V 150 x 150 x 65 1.0 British/Euro
STEI12600 088.200.012.434 12V 600W 230V 230 x 150 x 65 1.3 British/Euro
STEI12800 088.200.013.434 12V 800W 230V 270 x 150 x 65 1.8 British/Euro
STEI24350 088.200.018.434 24V 350W 230V 150 x 150 x 65 1.0 British/Euro
STEI24600 088.200.019.434 24V 600W 230V 230 x 150 x 65 1.3 British/Euro
STEI24800 088.200.020.434 24V 800W 230V 270 x 150 x 65 1.8 British/Euro

218
 Quasi Sine Inverters
1000W to 2700W Quasi Sine Inverters
Includes STESWR remote control panel and 5m of cable.

STEI121000· 12V, 1000W STEI121800· 12V, 1800W STEI122700· 12V, 2700W

STEI241000· 24V, 1000W STEI241800· 24V, 1800W STEI242700· 24V, 2700W

Voltage In Power Voltage Out Dimensions Weight

WA Ref PSH Socket Type Notes
(VDC) (W) (VAC) (L x W x D mm) (kg)
STEI121000 088.200.005.434 12V 1000W 230V 240 x 250 x 100 2.0 British/Euro Includes remote
STEI121800 088.200.008.434 12V 1800W 230V 300 x 250 x 100 4.0 British/Euro Includes remote
STEI122700 088.200.009.434 12V 2700W 230V 370 x 250 x 100 5.0 British/Euro Includes remote
STEI241000 088.200.014.434 24V 1000W 230V 240 x 250 x 100 2.0 British/Euro Includes remote
STEI241800 088.200.016.434 24V 1800W 230V 300 x 250 x 100 4.0 British/Euro Includes remote
STEI242700 088.200.017.434 24V 2700W 230V 370 x 250 x 100 5.0 British/Euro Includes remote

110V 50Hz UK Quasi Sine Inverters

110V 50Hz models for UK building sites with remote control and engine interlock.

STEAI121800· 12V, 1800W STEAI122500· 12V, 2500W

STEAI241800· 24V, 1800W STEAI242500· 24V, 2500W

Voltage In Power Voltage Out Dimensions Weight

WA Ref PSH Socket Type Notes
(VDC) (W) (VAC) (LxWxD mm) (kg)
STEAI121800 088.200.002.434 12V 1800W 110V 310 x 250 x 100 2.0 Yellow 16A
STEAI122500 ??? 12V 2500W 110V 420 x 250 x 250 4.0 2 x Yellow 16A
STEAI241800 088.200.003.434 24V 1800W 110V 310 x 250 x 100 2.0 Yellow 16A
STEAI242500 ??? 24V 2500W 110V 420 x 250 x 250 4.0 2 x Yellow 16A

219
 Quasi Sine Inverters
Sterling Power QS Series Inverters 
N

New Range of Quasi Sine Inverters

The QS series comprises the newest advances in smooth and efficient inverter performance and incorporates the
newest developments in the Sterling design language. Please be aware that sensitive electronics are unlikely to run on
a quasi sine inverter. Not all appliances will be suitable or operate as expected on quasi sine. If in doubt, please consider using a pure
sine inverter.
12V and 24V Inverters Full Performance
The QS series are available in 12V and 24V versions. Many inverters see their output capabilities suffer as the input
New Modern Design voltage sags. The QS series strives to offer the full output down
A clear white and red finish allows swift identification and to the shut-off voltage (10.5V at 12V).
distinction between existing inverter ranges. An angled front panel UK and Euro Sockets
stops cables pressing against the surface beneath. Available with Euro/UK twin plugs.
Quasi Sine Wave LCD Display and Remote
Quasi sine, 230-240VAC, 50-60Hz output ensuring your 230VAC Clear LCD display and a high clarity remote control offers full
equipment will run as expected. control and understanding of the inverter unit.
Higher Loading Voltage
The QS series maintains a higher 240VAC output throughout the
full load-time.

Sterling Power QS Series STEQSRC

Available in 12-24V and from 2000W-3000W Remote Control

Voltage In Power Voltage Out DC Current Dimensions

WA Ref PSH RCD Socket Type
(VDC) (W) (VAC) (A) (LxWxD mm)
STEPS122000 ??? 12V 2000W 240V ~200A 430 x 430 x 113 N British/Euro
STEPS123000 ??? 12V 3000W 240V ~300A 500 x 430 x 113 N British/Euro
STEPS242000 ??? 24V 2000W 240V ~100A 430 x 430 x 113 N British/Euro
STEPS243000 ??? 24V 3000W 240V ~150A 500 x 430 x 113 N British/Euro
STEQSRC ??? Remote Control for QS Series

220
 Pure Sine Inverters
Sterling Power SIB Series Pure Sine Inverters
The Sterling Power SIB series pure sine inverters allow you to replicate mains power on your vehicle. A pure sine
output allows any appliance that would normally run from domestic AC to run from these inverters. Quasi sine wave
inverters run the vast majority of appliances, except for thyristor-controlled appliances (e.g. washing machines).

12V and 24V Models Pre-wired

24VDC input models are available on request. All inverters come pre-wired and come with 24Kt gold-plated
230VAC 50Hz Models connectors.
For use with UK and European domestic appliances. Quiet Operation
British and Euro Sockets New larger fan to reduce operating noise.
Twin sockets adjustable between centre tapped earth and neutral High Power to Size Ratio
earth bonding. A small footprint for the power size across a range from 300W
USB Charger to 3000W.
Fitted with an additional USB charger.
1000kW+ Models
Includes the STESWR remote control panel with 5m of cable.

STESIB12300· 12V, 300W STESIB121000· 12V, 1000W STESIB122500· 12V, 2500W

STESIB121600· 12V, 1600W STESIB123000· 12V, 3000W

Voltage In Power Voltage Out Dimensions Weight

WA Ref PSH Socket Type Notes
(VDC) (W) (VAC) (LxWxD mm) (kg)
STESIB12300 088.200.023.434 12V 300W 230V 210 x 190 x 85 1.4 British/Euro 1m DC 8mm ring
STESIB12600 088.200.024.434 12V 600W 230V 250 x 190 x 85 2.0 British/Euro 1m DC 8mm ring
STESIB121000 088.200.021.434 12V 1000W 230V 300 x 190 x 85 2.2 British/Euro 8mm connection
STESIB121600 088.200.022.434 12V 1600W 230V 300 x 190 x 85 3.6 British/Euro 8mm connection
STESIB123000 ??? 12V 3000W 230V 300 x 260 x 186 5.0 British/Euro and RCD 12mm connection

221
 Pure Sine Inverters
Sterling Power PS Series Inverters 
N

New Range of Pure Sine Inverters

The PS series comprises the newest advances in smooth and efficient inverter performance and incorporates the
newest developments in the Sterling design language. Pure sine inverters are designed to perfectly replicate AC as
received from the mains supply ensuring all 230V appliances run exactly as expected.

12V, 24V, and 48V Inverters Higher Loading Voltage

With the developing 48V market a new range of high-powered The PS series maintains a higher 240VAC output throughout the
inverters have been developed and included within the range. full load-time.
New Modern Design Full Performance
A clear white and red finish allows swift identification and Many inverters see their output capabilities suffer as the input
distinction between existing inverter ranges. An angled front panel voltage sags. The PS series strives to offer the full output down to
stops cables pressing against the surface beneath. the shut-off voltage (10.5V at 12V).
Pure Sine Wave LCD Display and Remote
Pure sine, 230-240VAC, 50-60Hz output ensuring your 230VAC Clear LCD display and a high clarity remote control offers
equipment will run as expected. (except 48V) full control and understanding of the inverter unit.
RCD and Socket Models
Available with either Euro/UK twin plugs or RCD variants.

Sterling Power PS Series STEPSRC

Available in 12-24-48V and from 1,500W - 3,000W Remote Control
Twin socket and RCD models

Voltage In Power Voltage Out DC Current Dimensions

WA Ref PSH RCD Socket Type
(VDC) (W) (VAC) (A) (LxWxD mm)
STEPS121500 ??? 12V 1,500W 240V ~150A 454 x 262 x 113 N British/Euro
STEPS122000 ??? 12V 2,000W 240V ~200A 454 x 262 x 113 N British/Euro
STEPS123000 ??? 12V 3,000W 240V ~300A 565 x 262 x 113 N British/Euro
STEPS241500 ??? 24V 1,500W 240V ~70A 454 x 262 x 113 N British/Euro
STEPS242000 ??? 24V 2,000W 240V ~100A 454 x 262 x 113 N British/Euro
STEPS243000 ??? 24V 3,000W 240V ~150A 565 x 262 x 113 N British/Euro
STEPS482000 ??? 48V 2,000W 240V ~50A 454 x 262 x 113 N British/Euro
STEPSRCD121500 ??? 12V 1,500W 240V ~150A 454 x 262 x 113 Y RCD
STEPSRCD122000 ??? 12V 2,000W 240V ~200A 454 x 262 x 113 Y RCD
STEPSRCD123000 ??? 12V 3,000W 240V ~300A 565 x 262 x 113 Y RCD
STEPSRCD241500 ??? 24V 1,500W 240V ~70A 454 x 262 x 113 Y RCD
STEPSRCD242000 ??? 24V 2,000W 240V ~100A 454 x 262 x 113 Y RCD
STEPSRCD243000 ??? 24V 3,000W 240V ~150A 565 x 262 x 113 Y RCD
STEPSRCD482000 ??? 48V 2,000W 240V ~50A 454 x 262 x 113 Y RCD
STEPSRC ??? Remote Control for PS Series

222
 Battery Chargers
Sterling Power Pro Charge Ultra
An award winning global digital battery charger and the charger of choice by the world’s largest production boat builders. The Pro
Charge Ultra is one of the world’s most efficient battery chargers by using active power factor correction (PFC 0.99-1) which is rated
at over 90% efficient.

Truly Global Usage Automatic Desulphation Mode

The Pro Charge Ultra works at AC voltages (80-270VAC and 40- 7-10 days cycle with anti-stratification program to keep batteries
70Hz) and DC voltages (130-320V). rejuvenated.
Built and Certified to the highest standards Battery Temperature Compensation
UL1236SB listed – the highest build standard. CEC listed. Sensor included.
Comprehensive 32 LED front panel Up to 3 Isolated Outputs
The user is provided with a voltmeter, ammeter, and output Each output can carry the full current rating (not simultaneously).
power display. The panel also includes charging profiles and Optional Remote Control
warning status. Multilingual remote control with charging voltage, charge current,
11 Pre-Programmed Charging Profiles charging stage and duration, battery type, charger temperature,
Charging profiles for AGM, Gel, sealed/flooded, calcium and and battery temperature.
lithium (LiFePO4) batteries. Allow allows customisable options. Optional Bluetooth App Control
Larger Voltage/Current Requirements? An Android or iPhone-based app that provides the same features
The Pro Charge Ultra series can be put in series or parallel with as the remote control via Bluetooth 5 with a maximum range of
other units. 240m. Requires Bluetooth module STEPCUB.
Power Pack / Power Supply 5 Year Warranty
The chargers works effortlessly as a power supply to DC loads to All models now have a market-leading 5 year warranty.
prevent depletion of your battery capacity.

WA Ref PSH Voltage (VDC) Rating (A) Weight (kg) Dimensions (L x W x D mm) Notes
STEPCU1210 ??? 12V 10A 2.0 260 x 215 x 90mm
STEPCU1220 ??? 12V 20A 2.0 260 x 215 x 90mm
STEPCU1230 088.000.025.434 12V 30A 2.0 260 x 215 x 90mm
STEPCU1240 ??? 12V 40A 2.0 260 x 215 x 90mm
STEPCU1250 ??? 12V 50A 3.0 315 x 215 x 90mm
STEPCU1260 ??? 12V 60A 3.0 315 x 215 x 90mm
STEPCU2420 ??? 24V 20A 2.0 260 x 215 x 90mm
STEPCU2430 ??? 24V 30A 3.0 315 x 215 x 90mm

223
 Car Power Connectors
Car Power Plugs

CG1003 CG1007 CG1008

Universal fused cigar lighter plug. 8A Universal angled cigar lighter plug. 8A Universal cigar lighter plug and lead. 8A

WA Ref PSH Max Amperage (A) Description Standard

CG1003 ??? 8A Universal fused cigar lighter + DIN plug ISO4165, SAEJ563
CG1007 084.200.008.430 8A Universal angled cigar lighter + DIN plug ISO4165, SAEJ563
CG1008 084.200.009.430 8A Universal cigar lighter + DIN plug and lead ISO4165, SAEJ563

Car Power Sockets

CG1009 CG1010 CG1011

12V illuminated power socket and cigar lighter 24V illuminated power socket and cigar lighter Cigar lighter power socket. Ø28mm hole. 20A max.

WA Ref PSH Max Amperage (A) Description Standard

CG1009 084.300.008.430 12V illuminated power socket and cigar lighter SAEJ563
CG1010 084.300.009.430 24V illuminated power socket and cigar lighter SAEJ563
CG1011 084.300.010.430 20A 12V/24V Cigar lighter power socket and cover. Fits Ø28mm hole. SAEJ563

224
 Car Power Connectors
USB Panel Sockets
Panel mounted USB sockets. 12/24V input, 5V output.
36.5mm diameter (Ø29mm cutout). ABS plastic.

TER9000 TER9005
1 port, 2.1A output 2 port, 2.1A + 1A output

TER9010 TER9015
2 port, 2.1A + 2.1A output 2 port, 2.1A + 2.1A output, IP66, spring-loaded cover

WA Ref Input (V) Output (V) Notes

TER9000 12/24V 5V DC 2.1A 1 port
TER9005 12/24V 5V DC 3.1A (2.1A + 1A) 2 port
TER9010 12/24V 5V DC 4.2A (2.1A + 2.1A) 2 port
TER9015 12/24V 5V DC 4.2A (2.1A + 2.1A) 2 port, IP66 rated, spring-loaded cover.

Panel Digital Voltmeter

Panel mounted digital voltmeter. 6-30V.
4 display colour options (Red, Blue, Green, Amber). 36.5mm diameter (Ø29mm cutout).

TEM9020
6-30V panel mounted digital voltmeter

WA Ref Description
TEM9020 6-30V Panel Mounted Digital Voltmeter

225
 Batteries
Dry Cell Batteries

BAT1000 BAT1010 BAT1030

AA (LR6) AAA (LR03) C (LR14)

BAT1040 BAT1050
D (LR20) 9V/PP3 (6LF22)

WA Ref PSH Pack Quantity Voltage (V) Size Size (IEC) Dimensions (mm)
BAT1000 057.000.001.600 4 1.5V AA LR6 Ø14.5mm x 50.5mm
BAT1010 057.000.003.600 4 1.5V AAA LR03 Ø10.5mm x 44.5mm
BAT1030 057.000.006.600 2 1.5V C LR14 Ø26.2mm x 50.0mm
BAT1040 057.000.007.600 2 1.5V D LR20 Ø33.2mm x 61.5mm
BAT1050 057.000.008.600 1 9V 9V / PP3 6LF22 48.5 x 26.5 x 17.5mm

226
 Batteries
Button Cell Batteries

BAT1110 BAT1200 BAT1260

LR44/V13GA (LR1154)· Ø11.6mm x 5.4mm CR1220 · Ø12.5mm x 2.0mm CR1616 · Ø16.0mm x 1.6mm

BAT1210 BAT1280 BAT1220

CR1620 · Ø16.0mm x 2.0mm CR1632· Ø16.0mm x 3.2mm CR2016 · Ø20.0mm x 1.6mm

BAT1230 BAT1240 BAT1250

CR2025 · Ø20.0mm x 2.5mm CR2032 · Ø20.0mm x 3.2mm CR2430 · Ø24.5mm x 3.0mm

WA Ref (Pack) PSH Pack Quantity Voltage (V) Size Size (IEC) Dimensions (Ø x H)
BAT1110 057.000.012.600 1 1.5V LR44 / V13GA LR1154 Ø11.6mm x 5.4mm
BAT1200 057.000.013.600 1 3V CR1220 CR1220 Ø12.5mm x 2.0mm
BAT1260 057.000.020.600 1 3V CR1616 CR1616 Ø16.0mm x 1.6mm
BAT1210 057.000.014.600 1 3V CR1620 CR1620 Ø16.0mm x 2.0mm
BAT1280 057.000.021.600 1 3V CR1632 CR1632 Ø16.0mm x 3.2mm
BAT1220 057.000.015.600 1 3V CR2016 CR2016 Ø20.0mm x 1.6mm
BAT1230 057.000.016.600 1 3V CR2025 CR2025 Ø20.0mm x 2.5mm
BAT1240 057.000.017.600 1 3V CR2032 CR2032 Ø20.0mm x 3.2mm
BAT1250 057.000.018.600 1 3V CR2430 CR2430 Ø24.5mm x 3.0mm

227
 Batteries
Button Cell Batteries

BAT1255
CR2450· Ø24.5mm x 5.0mm

WA Ref (Pack) PSH Pack Quantity Voltage (V) Size Size (IEC) Dimensions (Ø x H)
BAT1255 057.000.019.600 1 3V CR2450 CR2450 Ø24.5mm x 5.0mm

Button Cell Size Guide

BAT1110 BAT1200 BAT1260 BAT1210 BAT1280

SR44/V13GA (LR1154) CR1220 CR1616 CR1620 CR1632
Ø11.6mm x 5.4mm Ø12.5mm x 2.0mm Ø16.0mm x 1.6mm Ø16.0mm x 2.0mm Ø16.0mm x 3.2mm
1.5V 3V 3V 3V 3V

BAT1220 BAT1230 BAT1240 BAT1250 BAT1255

CR2016 CR2025 CR2032 CR2430 CR2450
Ø20.0mm x 1.6mm Ø20.0mm x 2.5mm Ø20.0mm x 3.2mm Ø24.5mm x 3.0mm Ø24.5mm x 5.0mm
3V 3V 3V 3V 3V

228
 Tape
PVC Tape (Adhesive)
Self-adhesive PVC tapes designed for use in a variety of applications, e.g. insulating, repairs, colour-coding, bundling of wires, etc.
Continuous operating temperature from 0°C to +70°C. Thickness 0.13mm.
Available in a variety of widths, colours, and lengths. Sold per roll except TP1001B which is sold in packs of 10.

TP1000B TP1001B TP1002B TP1003B

Black · 12mm x 20m Black · 19mm x 20m Black · 25mm x 20m Black · 19mm x 33m
Pack of 10

TP1001W TP1001Y TP1001G TP1001R TP1001U

White · 19mm x 20m Yellow · 19mm x 20m Green · 19mm x 20m Red · 19mm x 20m Blue · 19mm x 20m

WA Ref PSH Width (mm) Length (m) Pack Size Colour

TP1000B 064.000.366.600 12mm 20m 1 Black 
TP1001B 064.000.367.600 19mm 20m 10 Black 
TP1002B 064.000.376.600 25mm 20m 1 Black 
TP1003B 064.000.377.600 19mm 33m 1 Black 
TP1001G 064.000.368.600 19mm 20m 1 Green 
TP1001R 064.000.371.600 19mm 20m 1 Red 
TP1001U 064.000.373.600 19mm 20m 1 Blue 
TP1001W 064.000.374.600 19mm 20m 1 White 
TP1001Y 064.000.375.600 19mm 20m 1 Yellow 

PVC Tape (Non-Adhesive)

Non-adhesive PVC tapes used for wrapping type applications, i.e. protecting harnesses and wiring looms against abrasion, etc.
Continuous operating temperature from 0°C to +90°C. Thickness 0.13mm.
Flame retardant. Conforms to Ford European Specification No. S-M98D 4-530-A
Sold per roll.

TP1110B TP1111B
Black · 19mm x 20m Black · 25mm x 20m

WA Ref PSH Width (mm) Length (m) Pack Size Colour

TP1110B 064.000.378.600 19mm 20m 1 Black 
TP1111B 064.000.379.600 25mm 20m 1 Black 

229
 Tape
Self-Amalgamating Tape
A strong self-amalgamating tape polyisobutylene elastic tape which when wrapped onto itself will create a watertight seal.
Used on cable joints, connections, etc. Continuous operating temperature from -95°C to +90°C.
Thickness 0.5mm. Sold per roll.

TP1200B
Black · 25mm x 10m

WA Ref PSH Width (mm) Length (m) Pack Size Colour

TP1200B 064.000.380.600 25mm 10m 1 Black 

Fleece Harness Tape

Self-adhesive fleece harness tape used for wrapping applications.
Designed to resist abrasion and dampen noise and vibration when used on harnesses, pipes, or tubes in areas such as the passenger
compartment of modern vehicles. Temperature resistant to +105°C.
Thickness 0.3mm. Sold per roll.

TP1300B
Black · 15mm x 15m

WA Ref PSH Width (mm) Length (m) Pack Size Colour

TP1300B 064.000.384.600 15mm 15m 1 Black 

230
 Workshop Tools
Disposable Gloves
Available in latex and nitrile. Box Quantity: 100 gloves

EC5712 EC5713 EC5722 EC5723 EC5724

Natural · Medium Natural · Large Blue · Medium Blue · Large Blue · Extra Large
Latex Latex Nitrile Nitrile Nitrile

EC5732 EC5733 EC5734 EC5742 EC5743 EC57244

Black · Medium Black · Large Black · Extra Large Orange · Medium Orange · Large Orange · Extra Large
Nitrile Nitrile Nitrile Nitrile Nitrile Nitrile

WA Ref PSH Material Size Box Quantity Colour

EC5712 064.000.313.600 Latex Medium 100 Natural 
EC5713 064.000.314.600 Latex Large 100 Natural 
EC5722 064.000.317.600 Nitrile Medium 100 Blue 
EC5723 064.000.318.600 Nitrile Large 100 Blue 
EC5724 064.000.319.600 Nitrile Extra Large 100 Blue 
EC5732 064.000.321.600 Nitrile Medium 100 Black 
EC5733 064.000.322.600 Nitrile Large 100 Black 
EC5734 064.000.323.600 Nitrile Extra Large 100 Black 
EC5742 064.000.325.600 Nitrile Medium 100 Orange 
EC5743 064.000.326.600 Nitrile Large 100 Orange 
EC5744 064.000.327.600 Nitrile Extra Large 100 Orange 

231
 Workshop Tools
60:40 Tin:Lead Solder
60% Tin (Sn) : 40% Lead (Pb) Alloy. Fast Flowing.
0.5kg reel (except TEM125). Solder wire with 2% flux core.

TEM1010 TEM1011 TEM1012 TEM1013

2.0mm/14SWG · 0.5kg reel 1.6mm/16SWG · 0.5kg reel 1.2mm/18SWG · 0.5kg reel 0.7mm/22SWG · 0.5kg reel

WA Ref PSH Diameter (mm) / Standard Wire Gauge Alloy Reel Weight (kg)
TEM1010 064.000.358.600 2.0mm / 14 SWG 60% Sn, 40% Pb 0.5kg
TEM1011 064.000.359.600 1.6mm / 16 SWG 60% Sn, 40% Pb 0.5kg
TEM1012 064.000.360.600 1.2mm / 18 SWG 60% Sn, 40% Pb 0.5kg
TEM1013 064.000.361.600 0.7mm / 22 SWG 60% Sn, 40% Pb 0.5kg

40:60 Tin:Lead Solder

40% Tin (Sn) : 60% Lead (Pb) Alloy. Economy version.
0.5kg reel. Solder wire with 2% flux core.

TEM1030 TEM1031 TEM1032 TEM1033

2.0mm/14SWG · 0.5kg reel 1.6mm/16SWG · 0.5kg reel 1.2mm/18SWG · 0.5kg reel 0.7mm/22SWG · 0.5kg reel

WA Ref PSH Diameter (mm) / Standard Wire Gauge Alloy Reel Weight (kg)
TEM1030 064.000.362.600 2.0mm / 14 SWG 40% Sn, 60% Pb 0.5kg
TEM1031 064.000.363.600 1.6mm / 16 SWG 40% Sn, 60% Pb 0.5kg
TEM1032 064.000.364.600 1.2mm / 18 SWG 40% Sn, 60% Pb 0.5kg
TEM1033 064.000.365.600 0.7mm / 22 SWG 40% Sn, 60% Pb 0.5kg

232
 Workshop Tools
Lead-Free Solder
Tin (Sn) - Silver (Ag) Alloy. Resin Cored Solder
0.5kg reel.

TEM101LF
2.0mm/14SWG · 0.5kg reel

WA Ref PSH Diameter (mm) / Standard Wire Gauge Alloy Reel Weight (kg)
TEM101LF 064.000.344.600 2.0mm / 14 SWG Sn-Ag (Lead free) 0.5kg

Weller Soldering Irons

Weller is the number one soldering brand in the world. Supplied with 240V UK plug.

SOL7001 SOL7003 SOL7005

40W 120W 175W

WA Ref PSH Voltage (V) Power (W) Notes

SOL7001 064.000.338.600 240V 40W UK plug
SOL7003 064.000.340.600 240V 120W UK plug
SOL7005 064.000.342.600 240V 175W UK plug

233
 Workshop Tools
Portasol SuperPro 125 Gas Soldering Iron
Portasol gas soldering iron with built-in blowtorch. Ready to melt solder in under 30 seconds.
Run time 2 hours (continuous use). Soldering iron supplied with 4.8mm double flat tip (PORSPT-08).
Adjustable from 25-130 (watts equivalent).  indicates items included in PORSPK kit.

PORSPT-01 PORSPT-02 PORSPT-03 PORSPT-04 PORSPT-07

1.0mm Single Flat 2.4mm Single Flat 3.2mm Single Flat 4.8mm Single Flat 3.2mm Double Flat

PORSPT-08 PORSPT-09 PORSPT-10 PORSPT-12 PORSPT-16

4.8mm Double Flat Hot Air Blower Hot Knife Hot Air Deflector Front End Burner

POR010580360 PORSPT-17 PORSPT-18 PORP2T-11 PORSPK

Portasol Super Pro 125 Gas Soldering Iron Gas Jet Venturi Sleeve Collet Storage Case Soldering Iron Kit

WA Ref PSH Description Included in PORSPK Kit

POR010580360 021.000.183.600 Professional Gas Soldering Iron 
PORSPK 021.000.185.600 SuperPro 125 Gas Soldering Iron Kit
PORP2T-11 021.000.184.600 Storage Case for SP1 
PORSPT-01 021.000.186.600 1.0mm Single Flat Tip
PORSPT-02 021.000.187.600 2.4mm Single Flat Tip 
PORSPT-03 021.000.188.600 3.2mm Single Flat Tip
PORSPT-04 021.000.189.600 4.8mm Single Flat Tip
PORSPT-07 021.000.190.600 3.2mm Double Flat Tip
PORSPT-08 021.000.191.600 4.8mm Double Flat Tip 
PORSPT-09 021.000.192.600 Hot Air Blower Tip 
PORSPT-10 021.000.193.600 Hot Knife Tip 
PORSPT-12 021.000.194.600 Hot Air Deflector 
PORSPT-16 021.000.195.600 Front End Burner
PORSPT-17 021.000.196.600 Gas Jet Venturi
PORSPT-18 021.000.197.600 Portasol Tip Retention Sleeve Collet

234
 Workshop Tools
Digital Vernier Caliper
150mm / 6” digital vernier caliper. Internal / external and depth measurements.
Large LCD measurement display. Imperial / metric conversion.
With zero-setting button.

TEM169
Carbon Fibre Digital Vernier Caliper

WA Ref PSH Description

TEM169 021.000.198.600 Carbon Fibre Digital Vernier Caliper

Wire Stripping Tools

A range of wire-stripping tools for cable sizes ranging from 0.2 to 10.0mm2.

TEM2110 TEM2111 TEM2112

Up to 6.0mm2 1.0-3.2mm2 0.5-6.0mm2

WA Ref PSH Notes Wire Size

TEM2110 021.000.205.600 Also suitable for crimping pre-insulated and non-insulated terminals up to 6.0mm2
TEM2111 021.000.206.600 Auto wire stripper 1.0-3.2mm2
TEM2112 021.000.207.600 Self-adjusting cable stripper. Adjustable stop for strip length consistency 0.5-6.0mm2

235
 Workshop Tools
Terminal Crimp Tools
A range of crimp tools for pre-insulated PVC terminals, non-insulated terminals, and copper-tube terminals.

TEM2100 TEM2101 TEM2103

TEM2104 TEM2130 TEM2131

TEM2132 TEM2133 TEM2134

TEM2135 TEM2154

WA Ref PSH Terminal Type Terminal Size Notes

TEM2100 021.000.200.600 Pre-insulated PVC terminals 0.5-6.0mm2 Inc cushion handles, cable cutter, and wire stripper
TEM2101 021.000.201.600 Pre-insulated PVC terminals 0.25-6.0mm2 Red, blue, and yellow terminals - Ratchet Action
TEM2103 021.000.203.600 Non-insulated terminals 0.25-6.0mm2 Includes cable cutter and spring return action
TEM2104 021.000.204.600 Non-insulated terminals 0.5-2.5mm2 Ratchet action
TEM2130 021.000.210.600 Copper Tube Terminals 1.5-10mm2 Ratchet action. Length: 260mm
TEM2131 021.000.211.600 Copper Tube Terminals 6.0-50mm2 Hexagonal crimp, Length: 390mm
TEM2132 021.000.212.600 Copper Tube Terminals 10-95mm2 Length: 580mm
TEM2133 021.000.213.600 Copper Tube Terminals 16-120mm2 Hexagonal crimp
TEM2134 021.000.214.600 Copper Tube Terminal Crimp Block 16-120mm2 Crimp formed by hammer blow or vice compression
TEM2135 021.000.215.600 Superseal / Econoseal Terminals 0.5-1.5mm2
TEM2154 021.000.216.600 Deutsch Terminals 0.5-4.0mm2

236
 Workshop Tools
Miscellaneous Electrical Tools
A range of auto-electrical related workshop tools for working with cable, cable-ties, and heat-shrink.

TEM2113 TEM2140
Cable Cutting Tool Gas Micro Torch

WA Ref PSH Notes

TEM2113 021.000.208.600 Heavy duty cable cutter for cable up to 70mm2. Overall Length: 235mm
TEM2140 064.000.328.600 Gas Micro Torch
Push button piezo electronic ignition. Adjustable flame size.
Uses standard butane lighter fuel. 60 minutes burning time per refill.

237