ComFlor 80/1.

2/S350 BS 5950 Parts 4, 6 and 8 Page 1 of 6

SCI Tata Steel v9.0.34.24751

JOB REFERENCE: Date: 10/4/2025
DECK REFERENCE: CF80/1.2_350 Time: 14:42:23
COMPANY NAME: Job No.:
CLIENT NAME:
FILENAME: Calcs by: Checked by:

FULL OUTPUT

NOTE: SECTION DESIGNED TO BRITISH STANDARDS

Construction Stage: PASS Max Unity Factor = 0.47
Normal Stage: PASS Max Unity Factor = 0.97
Fire Condition: PASS Max Unity Factor = 0.00
Serviceability: SATISFACTORY Max Unity Factor = 0.66

*** SECTION ADEQUATE ***

FLOOR PLAN DATA : (unpropped composite construction with ComFlor 80/1.2/S350 decking)
Beam centres - unequal 2.00 m, 3.42 m Span type DOUBLE
Beam or wall width 152 mm Propping NONE

PROFILE DATA : (ComFlor 80/1.2/S350 decking)

Depth 80 mm Pitch of deck ribs 300 mm
Trough width 120 mm Crest width 150.0 mm
Nominal sheet thickness 1.20 mm Design sheet thickness 1.15 mm
Deck weight 0.15 kN/m² Yield strength 350 N/mm²

CONCRETE SLAB : [Normal Weight Concrete ; Grade C30; Mesh : A193]

Overall slab depth 150 mm
Concrete characteristic strength 30 N/mm² Concrete wet density 2400 kg/m³
Modular ratio 10 Concrete dry density 2350 kg/m³
Bar reinforcement NONE
Mesh reinforcement :
Mesh A193 Yield strength 460 N/mm²
Cover to Mesh 30 mm Mesh Layers Double
Account for End Anchorage NO Shear connectors per rib N/A
Diameter of Shear Connectors N/A
Screeds N/A

SECTION PROPERTIES :
***NOTE - 1: All values of inertia are expressed in steel units
***NOTE - 2: Average inertia is used for deflection calculations for the composite stage
***NOTE - 3: Cracked dynamic inertia is used for natural frequency calculations

DECK PROFILE:
Sagging Inertia, Ixx 213.000 cm4/m Area of profile (Net), Ap 1864 mm²/m
Hogging Inertia, Iyy 203.000 cm4/m

COMPOSITE:
Inertia, Ixx - Uncracked 2296 cm4/m Cracked 1186 cm4/m
Average inertia 1741 cm4/m Cracked inertia (dynamic) 1354 cm4/m
Shear bond coefficients - Mr 104.19 Kr 0.049200
Concrete volume 0.104 m³/m/m

LOADS ACTING ON SLAB :

*** NOTE: Slab subjected to uniformly distributed loads (UDL) ONLY
Imposed (occupancy) 11.77 kN/m² Partitions 1.70 kN/m²
Ceilings and services 0.24 kN/m² Finishes 1.53 kN/m²
Self weight of concrete slab (wet) 2.46 kN/m² Self weight of decking 0.15 kN/m²
Self weight of concrete slab (dry) 2.40 kN/m² Screeds NONE
Construction load 1.5 kN/m²

File Name: v9.0.34.24751

ComFlor 80/1.2/S350 BS 5950 Parts 4, 6 and 8 Page 2 of 6

LINE LOADS PERPENDICULAR TO DECK SPAN :

None

LINE LOADS PARALLEL TO DECK SPAN :

None

FIRE DATA :
Design method SIMPLE Fire resistance period 30 mins
Non-permanent imposed loads 2.9 kN/m²

PARTIAL SAFETY FACTORS :

Dead (self weight) 1.40 Imposed 1.60
Super imposed dead 1.40 Fire (occupancy loads) 0.80

File Name: v9.0.34.24751

ComFlor 80/1.2/S350 BS 5950 Parts 4, 6 and 8 Page 3 of 6

CONSTRUCTION STAGE

LOADINGS Unfactored(kN/m²) Factored(kN/m²)

Self weight of decking 0.15 0.21
Self weight of concrete slab (wet) 2.46 3.44
Construction load (one span) 1.50 2.40
Construction load (adjacent span(s)) 0.50 0.80
Total factored load (maximum) = 0.21 + 3.44 + 0.00 + 2.40
= 6.05 kN/m²
NOTE: Critical span is longer span

EFFECTIVE SPAN OF DECK :

Effective span Le, is the smaller of
1) c/c of supports = 3.42 m
2) clear span + deck depth = 3.27 + 80.0 / 1000
= 3.35 m
Therefore Le = 3.35 m

SHEAR RESISTANCE CHECK :

*** Check at first interior support position
End reaction (longer span), Ra = 8.29 kN/m
Applied shear = 8.29 - 6.14 * 3.35
= 11.96 kN/m (absolute value)
Shear strength of decking, pv = 167.5 N/mm²
Shear resistance, Pv = 102.8 kN/m
UNITY FACTOR = 0.12 PASS

WEB CRUSHING RESISTANCE CHECK :

*** Check at first interior support position
Applied reaction 19.43 kN/m
Web crushing resistance, Pw 63.72 kN/m
UNITY FACTOR = 0.30 PASS

BENDING RESISTANCE CHECK :

NOTE: *** a 30% redistribution of hogging moment is taken based on equilibrium of the continuous decking as the sagging moment
does not exceed the design resistance

SAGGING:
Max applied moment is at 1.41 m from support in longer span
Max applied moment = 5.98 kNm/m
Moment resistance, Mc = 18.49 kNm/m
UNITY FACTOR = 0.32 PASS

HOGGING:
Max. applied moment = 6.13 kNm/m
Moment resistance, Mc = 14.59 kNm/m
UNITY FACTOR = 0.42 PASS

INTERACTION OF BENDING MOMENT AND SHEAR :

NOTE 1: *** Check at first interior support position
NOTE 2: *** a 30% redistribution of hogging moment is taken based on equilibrium of the continuous decking as the sagging moment
does not exceed the design resistance
Applied shear 11.96 kN/m
Shear resistance, Pv = 102.76 kN/m
Applied moment = 6.13 kNm/m
Moment resistance, Mc = 14.59 kNm/m
UNITY FACTOR = [11.96/102.76]^2 + [6.13/14.59]^2
= 0.19 PASS

File Name: v9.0.34.24751

ComFlor 80/1.2/S350 BS 5950 Parts 4, 6 and 8 Page 4 of 6

INTERACTION OF BENDING MOMENT AND WEB CRUSHING :

NOTE 1: *** Check at first interior support position
NOTE 2: *** a 30% redistribution of hogging moment is taken based on equilibrium of the continuous decking as the sagging moment
does not exceed the design resistance
Applied reaction = 18.33 kN/m
Web crushing resistance, Pw = 63.72 kN/m
Applied moment = 4.29 kNm/m
Moment resistance, Mc = 14.59 kNm/m
UNITY FACTOR = [18.33/63.72 + 4.29/14.59]
= 0.58 < 1.25 PASS
UPLIFT :
Uplift force = -2.52 kN/m

DEFLECTION CHECK :
Allowable deflection ðmax, is the lesser of
1) Effective span/180 (= 18.6 mm ), and
2) 20 mm ( absolute maximum value ), and
3) Slab depth/10 = ( 15.0 mm )
Max. deflection is at 1.41 m from support in longer span.
Max. self weight deflection = 5.41 mm
( < 15.00 mm ) SATISFACTORY
***NOTE: Deflection within code limits; ponding is not considered

File Name: v9.0.34.24751

ComFlor 80/1.2/S350 BS 5950 Parts 4, 6 and 8 Page 5 of 6

NORMAL STAGE

LOADINGS : (see construction load calculations for details):

Unfactored (kN/m²) Factored (kN/m²)
Dead 0.15 + 2.40
= 2.55 3.58
Imposed 11.77 + 1.70
= 13.47 21.56
Superimposed dead 0.24 + 1.53 + 0.00
= 1.77 2.48
Total = 17.80 kN/m² 27.61 kN/m²

EFFECTIVE SPAN :
Effective span Le, is the smaller of
1) c/c of supports
2) clear span + slab overall depth - depth to centroid = 3.27 + 150 / 1000 - 45.01 / 1000
= 3.37 m
Therefore Le = 3.37 m

SHEAR RESISTANCE CHECK :

Maximum applied shear = 0.5 * 27.61 * 3.37
= 46.56 kN/m
Shear stress in concrete, v = 0.99 N/mm²
Shear strength of concrete, vc = 1.14 N/mm²
Shear resistance = 135.00 * 104.99 * 1.14 / 300.00
= 53.68 kN/m
UNITY FACTOR = 0.87 PASS

PUNCHING SHEAR CHECK :

Not Applicable

SHEAR BOND RESISTANCE CHECK :

Shear span = 3.37 / 4
= 0.84 m
Applied shear = 40.53 kN/m
Shear bond resistance = 41.98 kN/m
Anchorage resistance = 0 kN/m
Total shear resistance = (41978.5/1000) + [(0/1000)]/2 = 41.98 kN/m
UNITY FACTOR = 0.97 PASS

BENDING RESISTANCE CHECK :

Applied bending moment = 0.125 * 27.61 * 3.37^2
= 39.40 kNm/m
Depth of concrete stress block = 44.94 mm
NOTE: depth of concrete in compression may be limited to 0.45 ds
Tension in decking = 606.73 kN/m
Tension in bar reinforcement = 0.00 kN/m
Depth to position of resultant tension = (0.0 * 120.0 + 606.7 * 105.0) / (0.0 + 606.7)
= 104.99 mm
Lever arm = 82.52 mm
NOTE: lever arm may be limited to 0.95 ds
Compression in concrete
= 606.73 kN/m
Moment resistance = 606.73 * 82.52/1000
= 50.07 kNm/m
UNITY FACTOR = 0.79 PASS

DEFLECTION CHECK :
Allowable deflection ðmax-i under imposed loads, is the lesser of

File Name: v9.0.34.24751

ComFlor 80/1.2/S350 BS 5950 Parts 4, 6 and 8 Page 6 of 6

1) Effective span/350 (= 9.6 mm ), and

2) Absolute maximum value (mm) = 20
Imposed load deflection = 0.013 * 15.00 * (3.37* 1000 )^4 / (205*17410700 )/1000
= 6.4 mm ( < 9.6 mm ) SATISFACTORY
Allowable total deflection ðmax-t, is the lesser of
1) Effective span/250 or 13.5 mm, and
2) 30 mm ( SCI recommended absolute maximum value )
Deflection due to imposed loads = 6.4 mm (based on average inertia)
Additional deflection due to superimposed dead loads = 0.8 mm (based on average inertia)
Total deflection = 6.4 + 0.8
= 7.2 mm ( < 13.5 mm ) SATISFACTORY

DYNAMIC SENSITIVITY :
*** NOTE: loads are dead + super-imposed dead + 10% imposed
Dynamic inertia (cracked section) = 1354 cm4
Maximum deflection = 0.013 * 5.67 * (3.37* 1000 )^4 / (205*13540940 )/1000
= 3.49 mm
Frequency = 18 / √ 3.49 )
= 9.64 Hz ( > 5.00 Hz) SATISFACTORY

File Name: v9.0.34.24751